func savex(dr int, x *gc.Node, oldx *gc.Node, res *gc.Node, t *gc.Type) {
r := gc.GetReg(dr)
gc.Nodreg(x, gc.Types[gc.TINT32], dr)
// save current ax and dx if they are live
// and not the destination
*oldx = gc.Node{}
if r > 0 && !gc.Samereg(x, res) {
gc.Tempname(oldx, gc.Types[gc.TINT32])
gmove(x, oldx)
}
gc.Regalloc(x, t, x)
}
/*
* register dr is one of the special ones (AX, CX, DI, SI, etc.).
* we need to use it. if it is already allocated as a temporary
* (r > 1; can only happen if a routine like sgen passed a
* special as cgen's res and then cgen used regalloc to reuse
* it as its own temporary), then move it for now to another
* register. caller must call restx to move it back.
* the move is not necessary if dr == res, because res is
* known to be dead.
*/
func savex(dr int, x *gc.Node, oldx *gc.Node, res *gc.Node, t *gc.Type) {
r := uint8(gc.GetReg(dr))
// save current ax and dx if they are live
// and not the destination
*oldx = gc.Node{}
gc.Nodreg(x, t, dr)
if r > 1 && !gc.Samereg(x, res) {
gc.Regalloc(oldx, gc.Types[gc.TINT64], nil)
x.Type = gc.Types[gc.TINT64]
gmove(x, oldx)
x.Type = t
// TODO(marvin): Fix Node.EType type union.
oldx.Etype = gc.EType(r) // squirrel away old r value
gc.SetReg(dr, 1)
}
}
/*
* generate shift according to op, one of:
* res = nl << nr
* res = nl >> nr
*/
func cgen_shift(op gc.Op, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
a := optoas(op, nl.Type)
if nr.Op == gc.OLITERAL {
var n1 gc.Node
gc.Regalloc(&n1, nl.Type, res)
gc.Cgen(nl, &n1)
sc := uint64(nr.Int())
if sc >= uint64(nl.Type.Width*8) {
// large shift gets 2 shifts by width-1
var n3 gc.Node
gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
gins(a, &n3, &n1)
gins(a, &n3, &n1)
} else {
gins(a, nr, &n1)
}
gmove(&n1, res)
gc.Regfree(&n1)
return
}
if nl.Ullman >= gc.UINF {
var n4 gc.Node
gc.Tempname(&n4, nl.Type)
gc.Cgen(nl, &n4)
nl = &n4
}
if nr.Ullman >= gc.UINF {
var n5 gc.Node
gc.Tempname(&n5, nr.Type)
gc.Cgen(nr, &n5)
nr = &n5
}
rcx := gc.GetReg(x86.REG_CX)
var n1 gc.Node
gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
// Allow either uint32 or uint64 as shift type,
// to avoid unnecessary conversion from uint32 to uint64
// just to do the comparison.
tcount := gc.Types[gc.Simtype[nr.Type.Etype]]
if tcount.Etype < gc.TUINT32 {
tcount = gc.Types[gc.TUINT32]
}
gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
var n3 gc.Node
gc.Regalloc(&n3, tcount, &n1) // to clear high bits of CX
var cx gc.Node
gc.Nodreg(&cx, gc.Types[gc.TUINT64], x86.REG_CX)
var oldcx gc.Node
if rcx > 0 && !gc.Samereg(&cx, res) {
gc.Regalloc(&oldcx, gc.Types[gc.TUINT64], nil)
gmove(&cx, &oldcx)
}
cx.Type = tcount
var n2 gc.Node
if gc.Samereg(&cx, res) {
gc.Regalloc(&n2, nl.Type, nil)
} else {
gc.Regalloc(&n2, nl.Type, res)
}
if nl.Ullman >= nr.Ullman {
gc.Cgen(nl, &n2)
gc.Cgen(nr, &n1)
gmove(&n1, &n3)
} else {
gc.Cgen(nr, &n1)
gmove(&n1, &n3)
gc.Cgen(nl, &n2)
}
gc.Regfree(&n3)
// test and fix up large shifts
if !bounded {
gc.Nodconst(&n3, tcount, nl.Type.Width*8)
gins(optoas(gc.OCMP, tcount), &n1, &n3)
p1 := gc.Gbranch(optoas(gc.OLT, tcount), nil, +1)
if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
gins(a, &n3, &n2)
} else {
gc.Nodconst(&n3, nl.Type, 0)
gmove(&n3, &n2)
}
gc.Patch(p1, gc.Pc)
}
gins(a, &n1, &n2)
if oldcx.Op != 0 {
cx.Type = gc.Types[gc.TUINT64]
gmove(&oldcx, &cx)
gc.Regfree(&oldcx)
}
gmove(&n2, res)
gc.Regfree(&n1)
gc.Regfree(&n2)
}
/*
* generate shift according to op, one of:
* res = nl << nr
* res = nl >> nr
*/
func cgen_shift(op gc.Op, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
if nl.Type.Width > 4 {
gc.Fatalf("cgen_shift %v", nl.Type)
}
w := int(nl.Type.Width * 8)
a := optoas(op, nl.Type)
if nr.Op == gc.OLITERAL {
var n2 gc.Node
gc.Tempname(&n2, nl.Type)
gc.Cgen(nl, &n2)
var n1 gc.Node
gc.Regalloc(&n1, nl.Type, res)
gmove(&n2, &n1)
sc := uint64(nr.Int())
if sc >= uint64(nl.Type.Width*8) {
// large shift gets 2 shifts by width-1
gins(a, ncon(uint32(w)-1), &n1)
gins(a, ncon(uint32(w)-1), &n1)
} else {
gins(a, nr, &n1)
}
gmove(&n1, res)
gc.Regfree(&n1)
return
}
var oldcx gc.Node
var cx gc.Node
gc.Nodreg(&cx, gc.Types[gc.TUINT32], x86.REG_CX)
if gc.GetReg(x86.REG_CX) > 1 && !gc.Samereg(&cx, res) {
gc.Tempname(&oldcx, gc.Types[gc.TUINT32])
gmove(&cx, &oldcx)
}
var n1 gc.Node
var nt gc.Node
if nr.Type.Width > 4 {
gc.Tempname(&nt, nr.Type)
n1 = nt
} else {
gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
}
var n2 gc.Node
if gc.Samereg(&cx, res) {
gc.Regalloc(&n2, nl.Type, nil)
} else {
gc.Regalloc(&n2, nl.Type, res)
}
if nl.Ullman >= nr.Ullman {
gc.Cgen(nl, &n2)
gc.Cgen(nr, &n1)
} else {
gc.Cgen(nr, &n1)
gc.Cgen(nl, &n2)
}
// test and fix up large shifts
if bounded {
if nr.Type.Width > 4 {
// delayed reg alloc
gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
gc.Regalloc(&n1, gc.Types[gc.TUINT32], &n1) // to hold the shift type in CX
var lo gc.Node
var hi gc.Node
split64(&nt, &lo, &hi)
gmove(&lo, &n1)
splitclean()
}
} else {
var p1 *obj.Prog
if nr.Type.Width > 4 {
// delayed reg alloc
gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
gc.Regalloc(&n1, gc.Types[gc.TUINT32], &n1) // to hold the shift type in CX
var lo gc.Node
var hi gc.Node
split64(&nt, &lo, &hi)
gmove(&lo, &n1)
gins(optoas(gc.OCMP, gc.Types[gc.TUINT32]), &hi, ncon(0))
p2 := gc.Gbranch(optoas(gc.ONE, gc.Types[gc.TUINT32]), nil, +1)
gins(optoas(gc.OCMP, gc.Types[gc.TUINT32]), &n1, ncon(uint32(w)))
p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
splitclean()
gc.Patch(p2, gc.Pc)
} else {
gins(optoas(gc.OCMP, nr.Type), &n1, ncon(uint32(w)))
p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
}
if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
gins(a, ncon(uint32(w)-1), &n2)
} else {
gmove(ncon(0), &n2)
}
gc.Patch(p1, gc.Pc)
}
gins(a, &n1, &n2)
if oldcx.Op != 0 {
gmove(&oldcx, &cx)
}
gmove(&n2, res)
gc.Regfree(&n1)
gc.Regfree(&n2)
}