예제 #1
0
func dmethodptrOffLSym(s *obj.LSym, ot int, x *obj.LSym) int {
	duintxxLSym(s, ot, 0, 4)
	r := obj.Addrel(s)
	r.Off = int32(ot)
	r.Siz = 4
	r.Sym = x
	r.Type = obj.R_METHODOFF
	return ot + 4
}
예제 #2
0
파일: obj9.go 프로젝트: glycerine/zygomys
func preprocess(ctxt *obj.Link, cursym *obj.LSym) {
	// TODO(minux): add morestack short-cuts with small fixed frame-size.
	ctxt.Cursym = cursym

	if cursym.Text == nil || cursym.Text.Link == nil {
		return
	}

	p := cursym.Text
	textstksiz := p.To.Offset
	if textstksiz == -8 {
		// Compatibility hack.
		p.From3.Offset |= obj.NOFRAME
		textstksiz = 0
	}
	if textstksiz%8 != 0 {
		ctxt.Diag("frame size %d not a multiple of 8", textstksiz)
	}
	if p.From3.Offset&obj.NOFRAME != 0 {
		if textstksiz != 0 {
			ctxt.Diag("NOFRAME functions must have a frame size of 0, not %d", textstksiz)
		}
	}

	cursym.Args = p.To.Val.(int32)
	cursym.Locals = int32(textstksiz)

	/*
	 * find leaf subroutines
	 * strip NOPs
	 * expand RET
	 * expand BECOME pseudo
	 */
	if ctxt.Debugvlog != 0 {
		fmt.Fprintf(ctxt.Bso, "%5.2f noops\n", obj.Cputime())
	}
	ctxt.Bso.Flush()

	var q *obj.Prog
	var q1 *obj.Prog
	for p := cursym.Text; p != nil; p = p.Link {
		switch p.As {
		/* too hard, just leave alone */
		case obj.ATEXT:
			q = p

			p.Mark |= LABEL | LEAF | SYNC
			if p.Link != nil {
				p.Link.Mark |= LABEL
			}

		case ANOR:
			q = p
			if p.To.Type == obj.TYPE_REG {
				if p.To.Reg == REGZERO {
					p.Mark |= LABEL | SYNC
				}
			}

		case ALWAR,
			ALBAR,
			ASTBCCC,
			ASTWCCC,
			AECIWX,
			AECOWX,
			AEIEIO,
			AICBI,
			AISYNC,
			ATLBIE,
			ATLBIEL,
			ASLBIA,
			ASLBIE,
			ASLBMFEE,
			ASLBMFEV,
			ASLBMTE,
			ADCBF,
			ADCBI,
			ADCBST,
			ADCBT,
			ADCBTST,
			ADCBZ,
			ASYNC,
			ATLBSYNC,
			APTESYNC,
			ALWSYNC,
			ATW,
			AWORD,
			ARFI,
			ARFCI,
			ARFID,
			AHRFID:
			q = p
			p.Mark |= LABEL | SYNC
			continue

		case AMOVW, AMOVWZ, AMOVD:
			q = p
			if p.From.Reg >= REG_SPECIAL || p.To.Reg >= REG_SPECIAL {
				p.Mark |= LABEL | SYNC
			}
			continue

		case AFABS,
			AFABSCC,
			AFADD,
			AFADDCC,
			AFCTIW,
			AFCTIWCC,
			AFCTIWZ,
			AFCTIWZCC,
			AFDIV,
			AFDIVCC,
			AFMADD,
			AFMADDCC,
			AFMOVD,
			AFMOVDU,
			/* case AFMOVDS: */
			AFMOVS,
			AFMOVSU,

			/* case AFMOVSD: */
			AFMSUB,
			AFMSUBCC,
			AFMUL,
			AFMULCC,
			AFNABS,
			AFNABSCC,
			AFNEG,
			AFNEGCC,
			AFNMADD,
			AFNMADDCC,
			AFNMSUB,
			AFNMSUBCC,
			AFRSP,
			AFRSPCC,
			AFSUB,
			AFSUBCC:
			q = p

			p.Mark |= FLOAT
			continue

		case ABL,
			ABCL,
			obj.ADUFFZERO,
			obj.ADUFFCOPY:
			cursym.Text.Mark &^= LEAF
			fallthrough

		case ABC,
			ABEQ,
			ABGE,
			ABGT,
			ABLE,
			ABLT,
			ABNE,
			ABR,
			ABVC,
			ABVS:
			p.Mark |= BRANCH
			q = p
			q1 = p.Pcond
			if q1 != nil {
				for q1.As == obj.ANOP {
					q1 = q1.Link
					p.Pcond = q1
				}

				if q1.Mark&LEAF == 0 {
					q1.Mark |= LABEL
				}
			} else {
				p.Mark |= LABEL
			}
			q1 = p.Link
			if q1 != nil {
				q1.Mark |= LABEL
			}
			continue

		case AFCMPO, AFCMPU:
			q = p
			p.Mark |= FCMP | FLOAT
			continue

		case obj.ARET:
			q = p
			if p.Link != nil {
				p.Link.Mark |= LABEL
			}
			continue

		case obj.ANOP:
			q1 = p.Link
			q.Link = q1 /* q is non-nop */
			q1.Mark |= p.Mark
			continue

		default:
			q = p
			continue
		}
	}

	autosize := int32(0)
	var aoffset int
	var mov obj.As
	var p1 *obj.Prog
	var p2 *obj.Prog
	for p := cursym.Text; p != nil; p = p.Link {
		o := p.As
		switch o {
		case obj.ATEXT:
			mov = AMOVD
			aoffset = 0
			autosize = int32(textstksiz)

			if p.Mark&LEAF != 0 && autosize == 0 && p.From3.Offset&obj.NOFRAME == 0 {
				// A leaf function with no locals has no frame.
				p.From3.Offset |= obj.NOFRAME
			}

			if p.From3.Offset&obj.NOFRAME == 0 {
				// If there is a stack frame at all, it includes
				// space to save the LR.
				autosize += int32(ctxt.FixedFrameSize())
			}

			p.To.Offset = int64(autosize)

			q = p

			if ctxt.Flag_shared && cursym.Name != "runtime.duffzero" && cursym.Name != "runtime.duffcopy" && cursym.Name != "runtime.stackBarrier" {
				// When compiling Go into PIC, all functions must start
				// with instructions to load the TOC pointer into r2:
				//
				//	addis r2, r12, .TOC.-func@ha
				//	addi r2, r2, .TOC.-func@l+4
				//
				// We could probably skip this prologue in some situations
				// but it's a bit subtle. However, it is both safe and
				// necessary to leave the prologue off duffzero and
				// duffcopy as we rely on being able to jump to a specific
				// instruction offset for them, and stackBarrier is only
				// ever called from an overwritten LR-save slot on the
				// stack (when r12 will not be remotely the right thing)
				// but fortunately does not access global data.
				//
				// These are AWORDS because there is no (afaict) way to
				// generate the addis instruction except as part of the
				// load of a large constant, and in that case there is no
				// way to use r12 as the source.
				q = obj.Appendp(ctxt, q)
				q.As = AWORD
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = 0x3c4c0000
				q = obj.Appendp(ctxt, q)
				q.As = AWORD
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = 0x38420000
				rel := obj.Addrel(ctxt.Cursym)
				rel.Off = 0
				rel.Siz = 8
				rel.Sym = obj.Linklookup(ctxt, ".TOC.", 0)
				rel.Type = obj.R_ADDRPOWER_PCREL
			}

			if cursym.Text.From3.Offset&obj.NOSPLIT == 0 {
				q = stacksplit(ctxt, q, autosize) // emit split check
			}

			if autosize != 0 {
				/* use MOVDU to adjust R1 when saving R31, if autosize is small */
				if cursym.Text.Mark&LEAF == 0 && autosize >= -BIG && autosize <= BIG {
					mov = AMOVDU
					aoffset = int(-autosize)
				} else {
					q = obj.Appendp(ctxt, q)
					q.As = AADD
					q.Lineno = p.Lineno
					q.From.Type = obj.TYPE_CONST
					q.From.Offset = int64(-autosize)
					q.To.Type = obj.TYPE_REG
					q.To.Reg = REGSP
					q.Spadj = +autosize
				}
			} else if cursym.Text.Mark&LEAF == 0 {
				// A very few functions that do not return to their caller
				// (e.g. gogo) are not identified as leaves but still have
				// no frame.
				cursym.Text.Mark |= LEAF
			}

			if cursym.Text.Mark&LEAF != 0 {
				cursym.Leaf = true
				break
			}

			q = obj.Appendp(ctxt, q)
			q.As = AMOVD
			q.Lineno = p.Lineno
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REG_LR
			q.To.Type = obj.TYPE_REG
			q.To.Reg = REGTMP

			q = obj.Appendp(ctxt, q)
			q.As = mov
			q.Lineno = p.Lineno
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REGTMP
			q.To.Type = obj.TYPE_MEM
			q.To.Offset = int64(aoffset)
			q.To.Reg = REGSP
			if q.As == AMOVDU {
				q.Spadj = int32(-aoffset)
			}

			if ctxt.Flag_shared {
				q = obj.Appendp(ctxt, q)
				q.As = AMOVD
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_REG
				q.From.Reg = REG_R2
				q.To.Type = obj.TYPE_MEM
				q.To.Reg = REGSP
				q.To.Offset = 24
			}

			if cursym.Text.From3.Offset&obj.WRAPPER != 0 {
				// if(g->panic != nil && g->panic->argp == FP) g->panic->argp = bottom-of-frame
				//
				//	MOVD g_panic(g), R3
				//	CMP R0, R3
				//	BEQ end
				//	MOVD panic_argp(R3), R4
				//	ADD $(autosize+8), R1, R5
				//	CMP R4, R5
				//	BNE end
				//	ADD $8, R1, R6
				//	MOVD R6, panic_argp(R3)
				// end:
				//	NOP
				//
				// The NOP is needed to give the jumps somewhere to land.
				// It is a liblink NOP, not a ppc64 NOP: it encodes to 0 instruction bytes.

				q = obj.Appendp(ctxt, q)

				q.As = AMOVD
				q.From.Type = obj.TYPE_MEM
				q.From.Reg = REGG
				q.From.Offset = 4 * int64(ctxt.Arch.PtrSize) // G.panic
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REG_R3

				q = obj.Appendp(ctxt, q)
				q.As = ACMP
				q.From.Type = obj.TYPE_REG
				q.From.Reg = REG_R0
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REG_R3

				q = obj.Appendp(ctxt, q)
				q.As = ABEQ
				q.To.Type = obj.TYPE_BRANCH
				p1 = q

				q = obj.Appendp(ctxt, q)
				q.As = AMOVD
				q.From.Type = obj.TYPE_MEM
				q.From.Reg = REG_R3
				q.From.Offset = 0 // Panic.argp
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REG_R4

				q = obj.Appendp(ctxt, q)
				q.As = AADD
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = int64(autosize) + ctxt.FixedFrameSize()
				q.Reg = REGSP
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REG_R5

				q = obj.Appendp(ctxt, q)
				q.As = ACMP
				q.From.Type = obj.TYPE_REG
				q.From.Reg = REG_R4
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REG_R5

				q = obj.Appendp(ctxt, q)
				q.As = ABNE
				q.To.Type = obj.TYPE_BRANCH
				p2 = q

				q = obj.Appendp(ctxt, q)
				q.As = AADD
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = ctxt.FixedFrameSize()
				q.Reg = REGSP
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REG_R6

				q = obj.Appendp(ctxt, q)
				q.As = AMOVD
				q.From.Type = obj.TYPE_REG
				q.From.Reg = REG_R6
				q.To.Type = obj.TYPE_MEM
				q.To.Reg = REG_R3
				q.To.Offset = 0 // Panic.argp

				q = obj.Appendp(ctxt, q)

				q.As = obj.ANOP
				p1.Pcond = q
				p2.Pcond = q
			}

		case obj.ARET:
			if p.From.Type == obj.TYPE_CONST {
				ctxt.Diag("using BECOME (%v) is not supported!", p)
				break
			}

			retTarget := p.To.Sym

			if cursym.Text.Mark&LEAF != 0 {
				if autosize == 0 {
					p.As = ABR
					p.From = obj.Addr{}
					if retTarget == nil {
						p.To.Type = obj.TYPE_REG
						p.To.Reg = REG_LR
					} else {
						p.To.Type = obj.TYPE_BRANCH
						p.To.Sym = retTarget
					}
					p.Mark |= BRANCH
					break
				}

				p.As = AADD
				p.From.Type = obj.TYPE_CONST
				p.From.Offset = int64(autosize)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = REGSP
				p.Spadj = -autosize

				q = ctxt.NewProg()
				q.As = ABR
				q.Lineno = p.Lineno
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REG_LR
				q.Mark |= BRANCH
				q.Spadj = +autosize

				q.Link = p.Link
				p.Link = q
				break
			}

			p.As = AMOVD
			p.From.Type = obj.TYPE_MEM
			p.From.Offset = 0
			p.From.Reg = REGSP
			p.To.Type = obj.TYPE_REG
			p.To.Reg = REGTMP

			q = ctxt.NewProg()
			q.As = AMOVD
			q.Lineno = p.Lineno
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REGTMP
			q.To.Type = obj.TYPE_REG
			q.To.Reg = REG_LR

			q.Link = p.Link
			p.Link = q
			p = q

			if false {
				// Debug bad returns
				q = ctxt.NewProg()

				q.As = AMOVD
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_MEM
				q.From.Offset = 0
				q.From.Reg = REGTMP
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REGTMP

				q.Link = p.Link
				p.Link = q
				p = q
			}

			if autosize != 0 {
				q = ctxt.NewProg()
				q.As = AADD
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = int64(autosize)
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REGSP
				q.Spadj = -autosize

				q.Link = p.Link
				p.Link = q
			}

			q1 = ctxt.NewProg()
			q1.As = ABR
			q1.Lineno = p.Lineno
			if retTarget == nil {
				q1.To.Type = obj.TYPE_REG
				q1.To.Reg = REG_LR
			} else {
				q1.To.Type = obj.TYPE_BRANCH
				q1.To.Sym = retTarget
			}
			q1.Mark |= BRANCH
			q1.Spadj = +autosize

			q1.Link = q.Link
			q.Link = q1
		case AADD:
			if p.To.Type == obj.TYPE_REG && p.To.Reg == REGSP && p.From.Type == obj.TYPE_CONST {
				p.Spadj = int32(-p.From.Offset)
			}
		}
	}
}
예제 #3
0
파일: asm0.go 프로젝트: glycerine/zygomys
func asmout(ctxt *obj.Link, p *obj.Prog, o *Optab, out []uint32) {
	o1 := uint32(0)
	o2 := uint32(0)
	o3 := uint32(0)
	o4 := uint32(0)

	switch o.type_ {
	default:
		ctxt.Diag("unknown type %d %v", o.type_)
		prasm(p)

	case 0: /* pseudo ops */
		break

	case 1: /* mov r1,r2 ==> OR r1,r0,r2 */
		a := AOR
		if p.As == AMOVW {
			a = AADDU // sign-extended to high 32 bits
		}
		o1 = OP_RRR(oprrr(ctxt, a), uint32(p.From.Reg), uint32(REGZERO), uint32(p.To.Reg))

	case 2: /* add/sub r1,[r2],r3 */
		r := int(p.Reg)

		if r == 0 {
			r = int(p.To.Reg)
		}
		o1 = OP_RRR(oprrr(ctxt, p.As), uint32(p.From.Reg), uint32(r), uint32(p.To.Reg))

	case 3: /* mov $soreg, r ==> or/add $i,o,r */
		v := regoff(ctxt, &p.From)

		r := int(p.From.Reg)
		if r == 0 {
			r = int(o.param)
		}
		a := AADDVU
		if o.a1 == C_ANDCON {
			a = AOR
		}

		o1 = OP_IRR(opirr(ctxt, a), uint32(v), uint32(r), uint32(p.To.Reg))

	case 4: /* add $scon,[r1],r2 */
		v := regoff(ctxt, &p.From)

		r := int(p.Reg)
		if r == 0 {
			r = int(p.To.Reg)
		}

		o1 = OP_IRR(opirr(ctxt, p.As), uint32(v), uint32(r), uint32(p.To.Reg))

	case 5: /* syscall */
		o1 = oprrr(ctxt, p.As)

	case 6: /* beq r1,[r2],sbra */
		v := int32(0)
		if p.Pcond == nil {
			v = int32(-4) >> 2
		} else {
			v = int32(p.Pcond.Pc-p.Pc-4) >> 2
		}
		if (v<<16)>>16 != v {
			ctxt.Diag("short branch too far\n%v", p)
		}
		o1 = OP_IRR(opirr(ctxt, p.As), uint32(v), uint32(p.From.Reg), uint32(p.Reg))
		// for ABFPT and ABFPF only: always fill delay slot with 0
		// see comments in func preprocess for details.
		o2 = 0

	case 7: /* mov r, soreg ==> sw o(r) */
		r := int(p.To.Reg)
		if r == 0 {
			r = int(o.param)
		}
		v := regoff(ctxt, &p.To)
		o1 = OP_IRR(opirr(ctxt, p.As), uint32(v), uint32(r), uint32(p.From.Reg))

	case 8: /* mov soreg, r ==> lw o(r) */
		r := int(p.From.Reg)
		if r == 0 {
			r = int(o.param)
		}
		v := regoff(ctxt, &p.From)
		o1 = OP_IRR(opirr(ctxt, -p.As), uint32(v), uint32(r), uint32(p.To.Reg))

	case 9: /* sll r1,[r2],r3 */
		r := int(p.Reg)

		if r == 0 {
			r = int(p.To.Reg)
		}
		o1 = OP_RRR(oprrr(ctxt, p.As), uint32(r), uint32(p.From.Reg), uint32(p.To.Reg))

	case 10: /* add $con,[r1],r2 ==> mov $con, t; add t,[r1],r2 */
		v := regoff(ctxt, &p.From)
		a := AOR
		if v < 0 {
			a = AADDU
		}
		o1 = OP_IRR(opirr(ctxt, a), uint32(v), uint32(0), uint32(REGTMP))
		r := int(p.Reg)
		if r == 0 {
			r = int(p.To.Reg)
		}
		o2 = OP_RRR(oprrr(ctxt, p.As), uint32(REGTMP), uint32(r), uint32(p.To.Reg))

	case 11: /* jmp lbra */
		v := int32(0)
		if aclass(ctxt, &p.To) == C_SBRA && p.To.Sym == nil && p.As == AJMP {
			// use PC-relative branch for short branches
			// BEQ	R0, R0, sbra
			if p.Pcond == nil {
				v = int32(-4) >> 2
			} else {
				v = int32(p.Pcond.Pc-p.Pc-4) >> 2
			}
			if (v<<16)>>16 == v {
				o1 = OP_IRR(opirr(ctxt, ABEQ), uint32(v), uint32(REGZERO), uint32(REGZERO))
				break
			}
		}
		if p.Pcond == nil {
			v = int32(p.Pc) >> 2
		} else {
			v = int32(p.Pcond.Pc) >> 2
		}
		o1 = OP_JMP(opirr(ctxt, p.As), uint32(v))
		if p.To.Sym == nil {
			p.To.Sym = ctxt.Cursym.Text.From.Sym
			p.To.Offset = p.Pcond.Pc
		}
		rel := obj.Addrel(ctxt.Cursym)
		rel.Off = int32(ctxt.Pc)
		rel.Siz = 4
		rel.Sym = p.To.Sym
		rel.Add = p.To.Offset
		if p.As == AJAL {
			rel.Type = obj.R_CALLMIPS
		} else {
			rel.Type = obj.R_JMPMIPS
		}

	case 12: /* movbs r,r */
		v := 16
		if p.As == AMOVB {
			v = 24
		}
		o1 = OP_SRR(opirr(ctxt, ASLL), uint32(v), uint32(p.From.Reg), uint32(p.To.Reg))
		o2 = OP_SRR(opirr(ctxt, ASRA), uint32(v), uint32(p.To.Reg), uint32(p.To.Reg))

	case 13: /* movbu r,r */
		if p.As == AMOVBU {
			o1 = OP_IRR(opirr(ctxt, AAND), uint32(0xff), uint32(p.From.Reg), uint32(p.To.Reg))
		} else {
			o1 = OP_IRR(opirr(ctxt, AAND), uint32(0xffff), uint32(p.From.Reg), uint32(p.To.Reg))
		}

	case 14: /* movwu r,r */
		o1 = OP_SRR(opirr(ctxt, -ASLLV), uint32(0), uint32(p.From.Reg), uint32(p.To.Reg))
		o2 = OP_SRR(opirr(ctxt, -ASRLV), uint32(0), uint32(p.To.Reg), uint32(p.To.Reg))

	case 16: /* sll $c,[r1],r2 */
		v := regoff(ctxt, &p.From)
		r := int(p.Reg)
		if r == 0 {
			r = int(p.To.Reg)
		}

		/* OP_SRR will use only the low 5 bits of the shift value */
		if v >= 32 && vshift(p.As) {
			o1 = OP_SRR(opirr(ctxt, -p.As), uint32(v-32), uint32(r), uint32(p.To.Reg))
		} else {
			o1 = OP_SRR(opirr(ctxt, p.As), uint32(v), uint32(r), uint32(p.To.Reg))
		}

	case 18: /* jmp [r1],0(r2) */
		r := int(p.Reg)
		if r == 0 {
			r = int(o.param)
		}
		o1 = OP_RRR(oprrr(ctxt, p.As), uint32(0), uint32(p.To.Reg), uint32(r))
		rel := obj.Addrel(ctxt.Cursym)
		rel.Off = int32(ctxt.Pc)
		rel.Siz = 0
		rel.Type = obj.R_CALLIND

	case 19: /* mov $lcon,r ==> lu+or */
		v := regoff(ctxt, &p.From)
		o1 = OP_IRR(opirr(ctxt, ALUI), uint32(v>>16), uint32(REGZERO), uint32(p.To.Reg))
		o2 = OP_IRR(opirr(ctxt, AOR), uint32(v), uint32(p.To.Reg), uint32(p.To.Reg))

	case 20: /* mov lo/hi,r */
		a := OP(2, 0) /* mfhi */
		if p.From.Reg == REG_LO {
			a = OP(2, 2) /* mflo */
		}
		o1 = OP_RRR(a, uint32(REGZERO), uint32(REGZERO), uint32(p.To.Reg))

	case 21: /* mov r,lo/hi */
		a := OP(2, 1) /* mthi */
		if p.To.Reg == REG_LO {
			a = OP(2, 3) /* mtlo */
		}
		o1 = OP_RRR(a, uint32(REGZERO), uint32(p.From.Reg), uint32(REGZERO))

	case 22: /* mul r1,r2 */
		o1 = OP_RRR(oprrr(ctxt, p.As), uint32(p.From.Reg), uint32(p.Reg), uint32(REGZERO))

	case 23: /* add $lcon,r1,r2 ==> lu+or+add */
		v := regoff(ctxt, &p.From)
		o1 = OP_IRR(opirr(ctxt, ALUI), uint32(v>>16), uint32(REGZERO), uint32(REGTMP))
		o2 = OP_IRR(opirr(ctxt, AOR), uint32(v), uint32(REGTMP), uint32(REGTMP))
		r := int(p.Reg)
		if r == 0 {
			r = int(p.To.Reg)
		}
		o3 = OP_RRR(oprrr(ctxt, p.As), uint32(REGTMP), uint32(r), uint32(p.To.Reg))

	case 24: /* mov $ucon,r ==> lu r */
		v := regoff(ctxt, &p.From)
		o1 = OP_IRR(opirr(ctxt, ALUI), uint32(v>>16), uint32(REGZERO), uint32(p.To.Reg))

	case 25: /* add/and $ucon,[r1],r2 ==> lu $con,t; add t,[r1],r2 */
		v := regoff(ctxt, &p.From)
		o1 = OP_IRR(opirr(ctxt, ALUI), uint32(v>>16), uint32(REGZERO), uint32(REGTMP))
		r := int(p.Reg)
		if r == 0 {
			r = int(p.To.Reg)
		}
		o2 = OP_RRR(oprrr(ctxt, p.As), uint32(REGTMP), uint32(r), uint32(p.To.Reg))

	case 26: /* mov $lsext/auto/oreg,r ==> lu+or+add */
		v := regoff(ctxt, &p.From)
		o1 = OP_IRR(opirr(ctxt, ALUI), uint32(v>>16), uint32(REGZERO), uint32(REGTMP))
		o2 = OP_IRR(opirr(ctxt, AOR), uint32(v), uint32(REGTMP), uint32(REGTMP))
		r := int(p.From.Reg)
		if r == 0 {
			r = int(o.param)
		}
		o3 = OP_RRR(oprrr(ctxt, AADDVU), uint32(REGTMP), uint32(r), uint32(p.To.Reg))

	case 27: /* mov [sl]ext/auto/oreg,fr ==> lwc1 o(r) */
		v := regoff(ctxt, &p.From)
		r := int(p.From.Reg)
		if r == 0 {
			r = int(o.param)
		}
		a := -AMOVF
		if p.As == AMOVD {
			a = -AMOVD
		}
		switch o.size {
		case 12:
			o1 = OP_IRR(opirr(ctxt, ALUI), uint32((v+1<<15)>>16), uint32(REGZERO), uint32(REGTMP))
			o2 = OP_RRR(oprrr(ctxt, AADDVU), uint32(r), uint32(REGTMP), uint32(REGTMP))
			o3 = OP_IRR(opirr(ctxt, a), uint32(v), uint32(REGTMP), uint32(p.To.Reg))

		case 4:
			o1 = OP_IRR(opirr(ctxt, a), uint32(v), uint32(r), uint32(p.To.Reg))
		}

	case 28: /* mov fr,[sl]ext/auto/oreg ==> swc1 o(r) */
		v := regoff(ctxt, &p.To)
		r := int(p.To.Reg)
		if r == 0 {
			r = int(o.param)
		}
		a := AMOVF
		if p.As == AMOVD {
			a = AMOVD
		}
		switch o.size {
		case 12:
			o1 = OP_IRR(opirr(ctxt, ALUI), uint32((v+1<<15)>>16), uint32(REGZERO), uint32(REGTMP))
			o2 = OP_RRR(oprrr(ctxt, AADDVU), uint32(r), uint32(REGTMP), uint32(REGTMP))
			o3 = OP_IRR(opirr(ctxt, a), uint32(v), uint32(REGTMP), uint32(p.From.Reg))

		case 4:
			o1 = OP_IRR(opirr(ctxt, a), uint32(v), uint32(r), uint32(p.From.Reg))
		}

	case 30: /* movw r,fr */
		a := SP(2, 1) | (4 << 21) /* mtc1 */
		o1 = OP_RRR(a, uint32(p.From.Reg), uint32(0), uint32(p.To.Reg))

	case 31: /* movw fr,r */
		a := SP(2, 1) | (0 << 21) /* mtc1 */
		o1 = OP_RRR(a, uint32(p.To.Reg), uint32(0), uint32(p.From.Reg))

	case 32: /* fadd fr1,[fr2],fr3 */
		r := int(p.Reg)
		if r == 0 {
			r = int(p.To.Reg)
		}
		o1 = OP_FRRR(oprrr(ctxt, p.As), uint32(p.From.Reg), uint32(r), uint32(p.To.Reg))

	case 33: /* fabs fr1, fr3 */
		o1 = OP_FRRR(oprrr(ctxt, p.As), uint32(0), uint32(p.From.Reg), uint32(p.To.Reg))

	case 34: /* mov $con,fr ==> or/add $i,t; mov t,fr */
		v := regoff(ctxt, &p.From)
		a := AADDU
		if o.a1 == C_ANDCON {
			a = AOR
		}
		o1 = OP_IRR(opirr(ctxt, a), uint32(v), uint32(0), uint32(REGTMP))
		o2 = OP_RRR(SP(2, 1)|(4<<21), uint32(REGTMP), uint32(0), uint32(p.To.Reg)) /* mtc1 */

	case 35: /* mov r,lext/auto/oreg ==> sw o(REGTMP) */
		v := regoff(ctxt, &p.To)
		r := int(p.To.Reg)
		if r == 0 {
			r = int(o.param)
		}
		o1 = OP_IRR(opirr(ctxt, ALUI), uint32((v+1<<15)>>16), uint32(REGZERO), uint32(REGTMP))
		o2 = OP_RRR(oprrr(ctxt, AADDVU), uint32(r), uint32(REGTMP), uint32(REGTMP))
		o3 = OP_IRR(opirr(ctxt, p.As), uint32(v), uint32(REGTMP), uint32(p.From.Reg))

	case 36: /* mov lext/auto/oreg,r ==> lw o(REGTMP) */
		v := regoff(ctxt, &p.From)
		r := int(p.From.Reg)
		if r == 0 {
			r = int(o.param)
		}
		o1 = OP_IRR(opirr(ctxt, ALUI), uint32((v+1<<15)>>16), uint32(REGZERO), uint32(REGTMP))
		o2 = OP_RRR(oprrr(ctxt, AADDVU), uint32(r), uint32(REGTMP), uint32(REGTMP))
		o3 = OP_IRR(opirr(ctxt, -p.As), uint32(v), uint32(REGTMP), uint32(p.To.Reg))

	case 37: /* movw r,mr */
		a := SP(2, 0) | (4 << 21) /* mtc0 */
		if p.As == AMOVV {
			a = SP(2, 0) | (5 << 21) /* dmtc0 */
		}
		o1 = OP_RRR(a, uint32(p.From.Reg), uint32(0), uint32(p.To.Reg))

	case 38: /* movw mr,r */
		a := SP(2, 0) | (0 << 21) /* mfc0 */
		if p.As == AMOVV {
			a = SP(2, 0) | (1 << 21) /* dmfc0 */
		}
		o1 = OP_RRR(a, uint32(p.To.Reg), uint32(0), uint32(p.From.Reg))

	case 40: /* word */
		o1 = uint32(regoff(ctxt, &p.From))

	case 41: /* movw f,fcr */
		o1 = OP_RRR(SP(2, 1)|(2<<21), uint32(REGZERO), uint32(0), uint32(p.To.Reg))    /* mfcc1 */
		o2 = OP_RRR(SP(2, 1)|(6<<21), uint32(p.From.Reg), uint32(0), uint32(p.To.Reg)) /* mtcc1 */

	case 42: /* movw fcr,r */
		o1 = OP_RRR(SP(2, 1)|(2<<21), uint32(p.To.Reg), uint32(0), uint32(p.From.Reg)) /* mfcc1 */

	case 47: /* movv r,fr */
		a := SP(2, 1) | (5 << 21) /* dmtc1 */
		o1 = OP_RRR(a, uint32(p.From.Reg), uint32(0), uint32(p.To.Reg))

	case 48: /* movv fr,r */
		a := SP(2, 1) | (1 << 21) /* dmtc1 */
		o1 = OP_RRR(a, uint32(p.To.Reg), uint32(0), uint32(p.From.Reg))

	case 49: /* undef */
		o1 = 52 /* trap -- teq r0, r0 */

	/* relocation operations */
	case 50: /* mov r,addr ==> lu + add REGSB, REGTMP + sw o(REGTMP) */
		o1 = OP_IRR(opirr(ctxt, ALUI), uint32(0), uint32(REGZERO), uint32(REGTMP))
		rel := obj.Addrel(ctxt.Cursym)
		rel.Off = int32(ctxt.Pc)
		rel.Siz = 4
		rel.Sym = p.To.Sym
		rel.Add = p.To.Offset
		rel.Type = obj.R_ADDRMIPSU
		o2 = OP_RRR(oprrr(ctxt, AADDVU), uint32(REGSB), uint32(REGTMP), uint32(REGTMP))
		o3 = OP_IRR(opirr(ctxt, p.As), uint32(0), uint32(REGTMP), uint32(p.From.Reg))
		rel2 := obj.Addrel(ctxt.Cursym)
		rel2.Off = int32(ctxt.Pc + 8)
		rel2.Siz = 4
		rel2.Sym = p.To.Sym
		rel2.Add = p.To.Offset
		rel2.Type = obj.R_ADDRMIPS

	case 51: /* mov addr,r ==> lu + add REGSB, REGTMP + lw o(REGTMP) */
		o1 = OP_IRR(opirr(ctxt, ALUI), uint32(0), uint32(REGZERO), uint32(REGTMP))
		rel := obj.Addrel(ctxt.Cursym)
		rel.Off = int32(ctxt.Pc)
		rel.Siz = 4
		rel.Sym = p.From.Sym
		rel.Add = p.From.Offset
		rel.Type = obj.R_ADDRMIPSU
		o2 = OP_RRR(oprrr(ctxt, AADDVU), uint32(REGSB), uint32(REGTMP), uint32(REGTMP))
		o3 = OP_IRR(opirr(ctxt, -p.As), uint32(0), uint32(REGTMP), uint32(p.To.Reg))
		rel2 := obj.Addrel(ctxt.Cursym)
		rel2.Off = int32(ctxt.Pc + 8)
		rel2.Siz = 4
		rel2.Sym = p.From.Sym
		rel2.Add = p.From.Offset
		rel2.Type = obj.R_ADDRMIPS

	case 52: /* mov $lext, r ==> lu + add REGSB, r + add */
		o1 = OP_IRR(opirr(ctxt, ALUI), uint32(0), uint32(REGZERO), uint32(p.To.Reg))
		rel := obj.Addrel(ctxt.Cursym)
		rel.Off = int32(ctxt.Pc)
		rel.Siz = 4
		rel.Sym = p.From.Sym
		rel.Add = p.From.Offset
		rel.Type = obj.R_ADDRMIPSU
		o2 = OP_RRR(oprrr(ctxt, AADDVU), uint32(REGSB), uint32(p.To.Reg), uint32(p.To.Reg))
		o3 = OP_IRR(opirr(ctxt, AADDVU), uint32(0), uint32(p.To.Reg), uint32(p.To.Reg))
		rel2 := obj.Addrel(ctxt.Cursym)
		rel2.Off = int32(ctxt.Pc + 8)
		rel2.Siz = 4
		rel2.Sym = p.From.Sym
		rel2.Add = p.From.Offset
		rel2.Type = obj.R_ADDRMIPS

	case 53: /* mov r, tlsvar ==> rdhwr + sw o(r3) */
		// clobbers R3 !
		// load thread pointer with RDHWR, R3 is used for fast kernel emulation on Linux
		o1 = (037<<26 + 073) | (29 << 11) | (3 << 16) // rdhwr $29, r3
		o2 = OP_IRR(opirr(ctxt, p.As), uint32(0), uint32(REG_R3), uint32(p.From.Reg))
		rel := obj.Addrel(ctxt.Cursym)
		rel.Off = int32(ctxt.Pc + 4)
		rel.Siz = 4
		rel.Sym = p.To.Sym
		rel.Add = p.To.Offset
		rel.Type = obj.R_ADDRMIPSTLS

	case 54: /* mov tlsvar, r ==> rdhwr + lw o(r3) */
		// clobbers R3 !
		o1 = (037<<26 + 073) | (29 << 11) | (3 << 16) // rdhwr $29, r3
		o2 = OP_IRR(opirr(ctxt, -p.As), uint32(0), uint32(REG_R3), uint32(p.To.Reg))
		rel := obj.Addrel(ctxt.Cursym)
		rel.Off = int32(ctxt.Pc + 4)
		rel.Siz = 4
		rel.Sym = p.From.Sym
		rel.Add = p.From.Offset
		rel.Type = obj.R_ADDRMIPSTLS

	case 55: /* mov $tlsvar, r ==> rdhwr + add */
		// clobbers R3 !
		o1 = (037<<26 + 073) | (29 << 11) | (3 << 16) // rdhwr $29, r3
		o2 = OP_IRR(opirr(ctxt, AADDVU), uint32(0), uint32(REG_R3), uint32(p.To.Reg))
		rel := obj.Addrel(ctxt.Cursym)
		rel.Off = int32(ctxt.Pc + 4)
		rel.Siz = 4
		rel.Sym = p.From.Sym
		rel.Add = p.From.Offset
		rel.Type = obj.R_ADDRMIPSTLS
	}

	out[0] = o1
	out[1] = o2
	out[2] = o3
	out[3] = o4
	return
}