// UnmarshalError unmarshals an error response for a JSON RPC service.
func UnmarshalError(req *request.Request) {
defer req.HTTPResponse.Body.Close()
bodyBytes, err := ioutil.ReadAll(req.HTTPResponse.Body)
if err != nil {
req.Error = awserr.New("SerializationError", "failed reading JSON RPC error response", err)
return
}
if len(bodyBytes) == 0 {
req.Error = awserr.NewRequestFailure(
awserr.New("SerializationError", req.HTTPResponse.Status, nil),
req.HTTPResponse.StatusCode,
"",
)
return
}
var jsonErr jsonErrorResponse
if err := json.Unmarshal(bodyBytes, &jsonErr); err != nil {
req.Error = awserr.New("SerializationError", "failed decoding JSON RPC error response", err)
return
}
codes := strings.SplitN(jsonErr.Code, "#", 2)
req.Error = awserr.NewRequestFailure(
awserr.New(codes[len(codes)-1], jsonErr.Message, nil),
req.HTTPResponse.StatusCode,
req.RequestID,
)
}
// loadProfiles loads from the file pointed to by shared credentials filename for profile.
// The credentials retrieved from the profile will be returned or error. Error will be
// returned if it fails to read from the file, or the data is invalid.
func loadProfile(filename, profile string) (Value, error) {
config, err := ini.LoadFile(filename)
if err != nil {
return Value{}, awserr.New("SharedCredsLoad", "failed to load shared credentials file", err)
}
iniProfile := config.Section(profile)
id, ok := iniProfile["aws_access_key_id"]
if !ok {
return Value{}, awserr.New("SharedCredsAccessKey",
fmt.Sprintf("shared credentials %s in %s did not contain aws_access_key_id", profile, filename),
nil)
}
secret, ok := iniProfile["aws_secret_access_key"]
if !ok {
return Value{}, awserr.New("SharedCredsSecret",
fmt.Sprintf("shared credentials %s in %s did not contain aws_secret_access_key", profile, filename),
nil)
}
token := iniProfile["aws_session_token"]
return Value{
AccessKeyID: id,
SecretAccessKey: secret,
SessionToken: token,
}, nil
}
// UnmarshalError unmarshals a response error for the REST JSON protocol.
func UnmarshalError(r *request.Request) {
code := r.HTTPResponse.Header.Get("X-Amzn-Errortype")
bodyBytes, err := ioutil.ReadAll(r.HTTPResponse.Body)
if err != nil {
r.Error = awserr.New("SerializationError", "failed reading REST JSON error response", err)
return
}
if len(bodyBytes) == 0 {
r.Error = awserr.NewRequestFailure(
awserr.New("SerializationError", r.HTTPResponse.Status, nil),
r.HTTPResponse.StatusCode,
"",
)
return
}
var jsonErr jsonErrorResponse
if err := json.Unmarshal(bodyBytes, &jsonErr); err != nil {
r.Error = awserr.New("SerializationError", "failed decoding REST JSON error response", err)
return
}
if code == "" {
code = jsonErr.Code
}
codes := strings.SplitN(code, ":", 2)
r.Error = awserr.NewRequestFailure(
awserr.New(codes[0], jsonErr.Message, nil),
r.HTTPResponse.StatusCode,
r.RequestID,
)
}
func unmarshalError(r *request.Request) {
defer r.HTTPResponse.Body.Close()
if r.HTTPResponse.StatusCode == http.StatusMovedPermanently {
r.Error = awserr.New("BucketRegionError",
fmt.Sprintf("incorrect region, the bucket is not in '%s' region", aws.StringValue(r.Service.Config.Region)), nil)
return
}
if r.HTTPResponse.ContentLength == int64(0) {
// No body, use status code to generate an awserr.Error
r.Error = awserr.NewRequestFailure(
awserr.New(strings.Replace(r.HTTPResponse.Status, " ", "", -1), r.HTTPResponse.Status, nil),
r.HTTPResponse.StatusCode,
"",
)
return
}
resp := &xmlErrorResponse{}
err := xml.NewDecoder(r.HTTPResponse.Body).Decode(resp)
if err != nil && err != io.EOF {
r.Error = awserr.New("SerializationError", "failed to decode S3 XML error response", nil)
} else {
r.Error = awserr.NewRequestFailure(
awserr.New(resp.Code, resp.Message, nil),
r.HTTPResponse.StatusCode,
"",
)
}
}
// UnmarshalError unmarshals a response error for the EC2 protocol.
func UnmarshalError(r *request.Request) {
defer r.HTTPResponse.Body.Close()
resp := &xmlErrorResponse{}
err := xml.NewDecoder(r.HTTPResponse.Body).Decode(resp)
if err != nil && err != io.EOF {
r.Error = awserr.New("SerializationError", "failed decoding EC2 Query error response", err)
} else {
r.Error = awserr.NewRequestFailure(
awserr.New(resp.Code, resp.Message, nil),
r.HTTPResponse.StatusCode,
resp.RequestID,
)
}
}
// Build builds a JSON payload for a JSON RPC request.
func Build(req *request.Request) {
var buf []byte
var err error
if req.ParamsFilled() {
buf, err = jsonutil.BuildJSON(req.Params)
if err != nil {
req.Error = awserr.New("SerializationError", "failed encoding JSON RPC request", err)
return
}
} else {
buf = emptyJSON
}
if req.Service.TargetPrefix != "" || string(buf) != "{}" {
req.SetBufferBody(buf)
}
if req.Service.TargetPrefix != "" {
target := req.Service.TargetPrefix + "." + req.Operation.Name
req.HTTPRequest.Header.Add("X-Amz-Target", target)
}
if req.Service.JSONVersion != "" {
jsonVersion := req.Service.JSONVersion
req.HTTPRequest.Header.Add("Content-Type", "application/x-amz-json-"+jsonVersion)
}
}
// Retrieve retrieves credentials from the EC2 service.
// Error will be returned if the request fails, or unable to extract
// the desired credentials.
func (m *EC2RoleProvider) Retrieve() (credentials.Value, error) {
if m.Client == nil {
m.Client = ec2metadata.New(nil)
}
credsList, err := requestCredList(m.Client)
if err != nil {
return credentials.Value{}, err
}
if len(credsList) == 0 {
return credentials.Value{}, awserr.New("EmptyEC2RoleList", "empty EC2 Role list", nil)
}
credsName := credsList[0]
roleCreds, err := requestCred(m.Client, credsName)
if err != nil {
return credentials.Value{}, err
}
m.SetExpiration(roleCreds.Expiration, m.ExpiryWindow)
return credentials.Value{
AccessKeyID: roleCreds.AccessKeyID,
SecretAccessKey: roleCreds.SecretAccessKey,
SessionToken: roleCreds.Token,
}, nil
}
func buildHeader(r *request.Request, v reflect.Value, name string) {
str, err := convertType(v)
if err != nil {
r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
} else if str != nil {
r.HTTPRequest.Header.Add(name, *str)
}
}
func buildQueryString(r *request.Request, v reflect.Value, name string, query url.Values) {
str, err := convertType(v)
if err != nil {
r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
} else if str != nil {
query.Set(name, *str)
}
}
// requestCredList requests a list of credentials from the EC2 service.
// If there are no credentials, or there is an error making or receiving the request
func requestCredList(client *ec2metadata.Client) ([]string, error) {
resp, err := client.GetMetadata(iamSecurityCredsPath)
if err != nil {
return nil, awserr.New("EC2RoleRequestError", "failed to list EC2 Roles", err)
}
credsList := []string{}
s := bufio.NewScanner(strings.NewReader(resp))
for s.Scan() {
credsList = append(credsList, s.Text())
}
if err := s.Err(); err != nil {
return nil, awserr.New("SerializationError", "failed to read list of EC2 Roles", err)
}
return credsList, nil
}
func unmarshalError(r *request.Request) {
defer r.HTTPResponse.Body.Close()
_, err := ioutil.ReadAll(r.HTTPResponse.Body)
if err != nil {
r.Error = awserr.New("SerializationError", "unable to unmarshal EC2 metadata error respose", err)
}
// TODO extract the error...
}
func buildHeaderMap(r *request.Request, v reflect.Value, prefix string) {
for _, key := range v.MapKeys() {
str, err := convertType(v.MapIndex(key))
if err != nil {
r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
} else if str != nil {
r.HTTPRequest.Header.Add(prefix+key.String(), *str)
}
}
}
func unmarshalHandler(r *request.Request) {
defer r.HTTPResponse.Body.Close()
b, err := ioutil.ReadAll(r.HTTPResponse.Body)
if err != nil {
r.Error = awserr.New("SerializationError", "unable to unmarshal EC2 metadata respose", err)
}
data := r.Data.(*metadataOutput)
data.Content = string(b)
}
// Unmarshal unmarshals a response for a JSON RPC service.
func Unmarshal(req *request.Request) {
defer req.HTTPResponse.Body.Close()
if req.DataFilled() {
err := jsonutil.UnmarshalJSON(req.Data, req.HTTPResponse.Body)
if err != nil {
req.Error = awserr.New("SerializationError", "failed decoding JSON RPC response", err)
}
}
return
}
// internal logic for deciding whether to upload a single part or use a
// multipart upload.
func (u *uploader) upload() (*UploadOutput, error) {
u.init()
if u.opts.PartSize < MinUploadPartSize {
msg := fmt.Sprintf("part size must be at least %d bytes", MinUploadPartSize)
return nil, awserr.New("ConfigError", msg, nil)
}
// Do one read to determine if we have more than one part
buf, err := u.nextReader()
if err == io.EOF || err == io.ErrUnexpectedEOF { // single part
return u.singlePart(buf)
} else if err != nil {
return nil, awserr.New("ReadRequestBody", "read upload data failed", err)
}
mu := multiuploader{uploader: u}
return mu.upload(buf)
}
// Unmarshal unmarshals a response body for the EC2 protocol.
func Unmarshal(r *request.Request) {
defer r.HTTPResponse.Body.Close()
if r.DataFilled() {
decoder := xml.NewDecoder(r.HTTPResponse.Body)
err := xmlutil.UnmarshalXML(r.Data, decoder, "")
if err != nil {
r.Error = awserr.New("SerializationError", "failed decoding EC2 Query response", err)
return
}
}
}
func buildURI(r *request.Request, v reflect.Value, name string) {
value, err := convertType(v)
if err != nil {
r.Error = awserr.New("SerializationError", "failed to encode REST request", err)
} else if value != nil {
uri := r.HTTPRequest.URL.Path
uri = strings.Replace(uri, "{"+name+"}", EscapePath(*value, true), -1)
uri = strings.Replace(uri, "{"+name+"+}", EscapePath(*value, false), -1)
r.HTTPRequest.URL.Path = uri
}
}
// ConvertFromList accepts a []*dynamodb.AttributeValue and converts it to an array or
// slice.
//
// If v contains any structs, the result is first converted it to a
// []interface{}, then JSON encoded/decoded it to convert to a typed array or
// slice, so `json` struct tags are respected.
func ConvertFromList(item []*dynamodb.AttributeValue, v interface{}) (err error) {
defer func() {
if r := recover(); r != nil {
if e, ok := r.(runtime.Error); ok {
err = e
} else if s, ok := r.(string); ok {
err = fmt.Errorf(s)
} else {
err = r.(error)
}
item = nil
}
}()
rv := reflect.ValueOf(v)
if rv.Kind() != reflect.Ptr || rv.IsNil() {
return awserr.New("SerializationError",
fmt.Sprintf("v must be a non-nil pointer to an array or slice, got %s",
rv.Type()),
nil)
}
if rv.Elem().Kind() != reflect.Array && rv.Elem().Kind() != reflect.Slice {
return awserr.New("SerializationError",
fmt.Sprintf("v must be a non-nil pointer to an array or slice, got %s",
rv.Type()),
nil)
}
l := make([]interface{}, 0, len(item))
for _, v := range item {
l = append(l, convertFrom(v))
}
if isTyped(reflect.TypeOf(v)) {
err = convertToTyped(l, v)
} else {
rv.Elem().Set(reflect.ValueOf(l))
}
return err
}
// ConvertFromMap accepts a map[string]*dynamodb.AttributeValue and converts it to a
// map[string]interface{} or struct.
//
// If v points to a struct, the result is first converted it to a
// map[string]interface{}, then JSON encoded/decoded it to convert to a struct,
// so `json` struct tags are respected.
func ConvertFromMap(item map[string]*dynamodb.AttributeValue, v interface{}) (err error) {
defer func() {
if r := recover(); r != nil {
if e, ok := r.(runtime.Error); ok {
err = e
} else if s, ok := r.(string); ok {
err = fmt.Errorf(s)
} else {
err = r.(error)
}
item = nil
}
}()
rv := reflect.ValueOf(v)
if rv.Kind() != reflect.Ptr || rv.IsNil() {
return awserr.New("SerializationError",
fmt.Sprintf("v must be a non-nil pointer to a map[string]interface{} or struct, got %s",
rv.Type()),
nil)
}
if rv.Elem().Kind() != reflect.Struct && !(rv.Elem().Kind() == reflect.Map && rv.Elem().Type().Key().Kind() == reflect.String) {
return awserr.New("SerializationError",
fmt.Sprintf("v must be a non-nil pointer to a map[string]interface{} or struct, got %s",
rv.Type()),
nil)
}
m := make(map[string]interface{})
for k, v := range item {
m[k] = convertFrom(v)
}
if isTyped(reflect.TypeOf(v)) {
err = convertToTyped(m, v)
} else {
rv.Elem().Set(reflect.ValueOf(m))
}
return err
}
func unmarshalBody(r *request.Request, v reflect.Value) {
if field, ok := v.Type().FieldByName("SDKShapeTraits"); ok {
if payloadName := field.Tag.Get("payload"); payloadName != "" {
pfield, _ := v.Type().FieldByName(payloadName)
if ptag := pfield.Tag.Get("type"); ptag != "" && ptag != "structure" {
payload := v.FieldByName(payloadName)
if payload.IsValid() {
switch payload.Interface().(type) {
case []byte:
b, err := ioutil.ReadAll(r.HTTPResponse.Body)
if err != nil {
r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
} else {
payload.Set(reflect.ValueOf(b))
}
case *string:
b, err := ioutil.ReadAll(r.HTTPResponse.Body)
if err != nil {
r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
} else {
str := string(b)
payload.Set(reflect.ValueOf(&str))
}
default:
switch payload.Type().String() {
case "io.ReadSeeker":
payload.Set(reflect.ValueOf(aws.ReadSeekCloser(r.HTTPResponse.Body)))
case "aws.ReadSeekCloser", "io.ReadCloser":
payload.Set(reflect.ValueOf(r.HTTPResponse.Body))
default:
r.Error = awserr.New("SerializationError",
"failed to decode REST response",
fmt.Errorf("unknown payload type %s", payload.Type()))
}
}
}
}
}
}
}
// ConvertToList accepts an array or slice and converts it to a
// []*dynamodb.AttributeValue.
//
// If in contains any structs, it is first JSON encoded/decoded it to convert it
// to a []interface{}, so `json` struct tags are respected.
func ConvertToList(in interface{}) (item []*dynamodb.AttributeValue, err error) {
defer func() {
if r := recover(); r != nil {
if e, ok := r.(runtime.Error); ok {
err = e
} else if s, ok := r.(string); ok {
err = fmt.Errorf(s)
} else {
err = r.(error)
}
item = nil
}
}()
if in == nil {
return nil, awserr.New("SerializationError",
"in must be an array or slice, got <nil>",
nil)
}
v := reflect.ValueOf(in)
if v.Kind() != reflect.Array && v.Kind() != reflect.Slice {
return nil, awserr.New("SerializationError",
fmt.Sprintf("in must be an array or slice, got %s",
v.Type().String()),
nil)
}
if isTyped(reflect.TypeOf(in)) {
var out []interface{}
in = convertToUntyped(in, out)
}
item = make([]*dynamodb.AttributeValue, 0, len(in.([]interface{})))
for _, v := range in.([]interface{}) {
item = append(item, convertTo(v))
}
return item, nil
}
// Build builds a request payload for the REST XML protocol.
func Build(r *request.Request) {
rest.Build(r)
if t := rest.PayloadType(r.Params); t == "structure" || t == "" {
var buf bytes.Buffer
err := xmlutil.BuildXML(r.Params, xml.NewEncoder(&buf))
if err != nil {
r.Error = awserr.New("SerializationError", "failed to encode rest XML request", err)
return
}
r.SetBufferBody(buf.Bytes())
}
}
// Unmarshal unmarshals a payload response for the REST XML protocol.
func Unmarshal(r *request.Request) {
if t := rest.PayloadType(r.Data); t == "structure" || t == "" {
defer r.HTTPResponse.Body.Close()
decoder := xml.NewDecoder(r.HTTPResponse.Body)
err := xmlutil.UnmarshalXML(r.Data, decoder, "")
if err != nil {
r.Error = awserr.New("SerializationError", "failed to decode REST XML response", err)
return
}
} else {
rest.Unmarshal(r)
}
}
// ConvertToMap accepts a map[string]interface{} or struct and converts it to a
// map[string]*dynamodb.AttributeValue.
//
// If in contains any structs, it is first JSON encoded/decoded it to convert it
// to a map[string]interface{}, so `json` struct tags are respected.
func ConvertToMap(in interface{}) (item map[string]*dynamodb.AttributeValue, err error) {
defer func() {
if r := recover(); r != nil {
if e, ok := r.(runtime.Error); ok {
err = e
} else if s, ok := r.(string); ok {
err = fmt.Errorf(s)
} else {
err = r.(error)
}
item = nil
}
}()
if in == nil {
return nil, awserr.New("SerializationError",
"in must be a map[string]interface{} or struct, got <nil>", nil)
}
v := reflect.ValueOf(in)
if v.Kind() != reflect.Struct && !(v.Kind() == reflect.Map && v.Type().Key().Kind() == reflect.String) {
return nil, awserr.New("SerializationError",
fmt.Sprintf("in must be a map[string]interface{} or struct, got %s",
v.Type().String()),
nil)
}
if isTyped(reflect.TypeOf(in)) {
var out map[string]interface{}
in = convertToUntyped(in, out)
}
item = make(map[string]*dynamodb.AttributeValue)
for k, v := range in.(map[string]interface{}) {
item[k] = convertTo(v)
}
return item, nil
}
// ConvertFrom accepts a *dynamodb.AttributeValue and converts it to any interface{}.
//
// If v contains any structs, the result is first converted it to a interface{},
// then JSON encoded/decoded it to convert to a struct, so `json` struct tags
// are respected.
func ConvertFrom(item *dynamodb.AttributeValue, v interface{}) (err error) {
defer func() {
if r := recover(); r != nil {
if e, ok := r.(runtime.Error); ok {
err = e
} else if s, ok := r.(string); ok {
err = fmt.Errorf(s)
} else {
err = r.(error)
}
item = nil
}
}()
rv := reflect.ValueOf(v)
if rv.Kind() != reflect.Ptr || rv.IsNil() {
return awserr.New("SerializationError",
fmt.Sprintf("v must be a non-nil pointer to an interface{} or struct, got %s",
rv.Type()),
nil)
}
if rv.Elem().Kind() != reflect.Interface && rv.Elem().Kind() != reflect.Struct {
return awserr.New("SerializationError",
fmt.Sprintf("v must be a non-nil pointer to an interface{} or struct, got %s",
rv.Type()),
nil)
}
res := convertFrom(item)
if isTyped(reflect.TypeOf(v)) {
err = convertToTyped(res, v)
} else if res != nil {
rv.Elem().Set(reflect.ValueOf(res))
}
return err
}
// contentMD5 computes and sets the HTTP Content-MD5 header for requests that
// require it.
func contentMD5(r *request.Request) {
h := md5.New()
// hash the body. seek back to the first position after reading to reset
// the body for transmission. copy errors may be assumed to be from the
// body.
_, err := io.Copy(h, r.Body)
if err != nil {
r.Error = awserr.New("ContentMD5", "failed to read body", err)
return
}
_, err = r.Body.Seek(0, 0)
if err != nil {
r.Error = awserr.New("ContentMD5", "failed to seek body", err)
return
}
// encode the md5 checksum in base64 and set the request header.
sum := h.Sum(nil)
sum64 := make([]byte, base64.StdEncoding.EncodedLen(len(sum)))
base64.StdEncoding.Encode(sum64, sum)
r.HTTPRequest.Header.Set("Content-MD5", string(sum64))
}
// requestCred requests the credentials for a specific credentials from the EC2 service.
//
// If the credentials cannot be found, or there is an error reading the response
// and error will be returned.
func requestCred(client *ec2metadata.Client, credsName string) (ec2RoleCredRespBody, error) {
resp, err := client.GetMetadata(path.Join(iamSecurityCredsPath, credsName))
if err != nil {
return ec2RoleCredRespBody{},
awserr.New("EC2RoleRequestError",
fmt.Sprintf("failed to get %s EC2 Role credentials", credsName),
err)
}
respCreds := ec2RoleCredRespBody{}
if err := json.NewDecoder(strings.NewReader(resp)).Decode(&respCreds); err != nil {
return ec2RoleCredRespBody{},
awserr.New("SerializationError",
fmt.Sprintf("failed to decode %s EC2 Role credentials", credsName),
err)
}
if respCreds.Code != "Success" {
// If an error code was returned something failed requesting the role.
return ec2RoleCredRespBody{}, awserr.New(respCreds.Code, respCreds.Message, nil)
}
return respCreds, nil
}
func unmarshalLocationElements(r *request.Request, v reflect.Value) {
for i := 0; i < v.NumField(); i++ {
m, field := v.Field(i), v.Type().Field(i)
if n := field.Name; n[0:1] == strings.ToLower(n[0:1]) {
continue
}
if m.IsValid() {
name := field.Tag.Get("locationName")
if name == "" {
name = field.Name
}
switch field.Tag.Get("location") {
case "statusCode":
unmarshalStatusCode(m, r.HTTPResponse.StatusCode)
case "header":
err := unmarshalHeader(m, r.HTTPResponse.Header.Get(name))
if err != nil {
r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
break
}
case "headers":
prefix := field.Tag.Get("locationName")
err := unmarshalHeaderMap(m, r.HTTPResponse.Header, prefix)
if err != nil {
r.Error = awserr.New("SerializationError", "failed to decode REST response", err)
break
}
}
}
if r.Error != nil {
return
}
}
}
func buildGetBucketLocation(r *request.Request) {
if r.DataFilled() {
out := r.Data.(*GetBucketLocationOutput)
b, err := ioutil.ReadAll(r.HTTPResponse.Body)
if err != nil {
r.Error = awserr.New("SerializationError", "failed reading response body", err)
return
}
match := reBucketLocation.FindSubmatch(b)
if len(match) > 1 {
loc := string(match[1])
out.LocationConstraint = &loc
}
}
}
// Build builds a request for an AWS Query service.
func Build(r *request.Request) {
body := url.Values{
"Action": {r.Operation.Name},
"Version": {r.Service.APIVersion},
}
if err := queryutil.Parse(body, r.Params, false); err != nil {
r.Error = awserr.New("SerializationError", "failed encoding Query request", err)
return
}
if r.ExpireTime == 0 {
r.HTTPRequest.Method = "POST"
r.HTTPRequest.Header.Set("Content-Type", "application/x-www-form-urlencoded; charset=utf-8")
r.SetBufferBody([]byte(body.Encode()))
} else { // This is a pre-signed request
r.HTTPRequest.Method = "GET"
r.HTTPRequest.URL.RawQuery = body.Encode()
}
}