예제 #1
0
// Status returns the current status of this deviceset
func (devices *DeviceSet) Status() *Status {
	devices.Lock()
	defer devices.Unlock()

	status := &Status{}

	status.PoolName = devices.getPoolName()
	status.DataFile = devices.DataDevicePath()
	status.DataLoopback = devices.dataLoopFile
	status.MetadataFile = devices.MetadataDevicePath()
	status.MetadataLoopback = devices.metadataLoopFile
	status.UdevSyncSupported = devicemapper.UdevSyncSupported()

	totalSizeInSectors, _, dataUsed, dataTotal, metadataUsed, metadataTotal, err := devices.poolStatus()
	if err == nil {
		// Convert from blocks to bytes
		blockSizeInSectors := totalSizeInSectors / dataTotal

		status.Data.Used = dataUsed * blockSizeInSectors * 512
		status.Data.Total = dataTotal * blockSizeInSectors * 512

		// metadata blocks are always 4k
		status.Metadata.Used = metadataUsed * 4096
		status.Metadata.Total = metadataTotal * 4096

		status.SectorSize = blockSizeInSectors * 512
	}

	return status
}
예제 #2
0
파일: deviceset.go 프로젝트: ifa6/docker-1
// Status returns the current status of this deviceset
func (devices *DeviceSet) Status() *Status {
	devices.Lock()
	defer devices.Unlock()

	status := &Status{}

	status.PoolName = devices.getPoolName()
	status.DataFile = devices.DataDevicePath()
	status.DataLoopback = devices.dataLoopFile
	status.MetadataFile = devices.MetadataDevicePath()
	status.MetadataLoopback = devices.metadataLoopFile
	status.UdevSyncSupported = devicemapper.UdevSyncSupported()
	status.DeferredRemoveEnabled = devices.deferredRemove

	totalSizeInSectors, _, dataUsed, dataTotal, metadataUsed, metadataTotal, err := devices.poolStatus()
	if err == nil {
		// Convert from blocks to bytes
		blockSizeInSectors := totalSizeInSectors / dataTotal

		status.Data.Used = dataUsed * blockSizeInSectors * 512
		status.Data.Total = dataTotal * blockSizeInSectors * 512
		status.Data.Available = status.Data.Total - status.Data.Used

		// metadata blocks are always 4k
		status.Metadata.Used = metadataUsed * 4096
		status.Metadata.Total = metadataTotal * 4096
		status.Metadata.Available = status.Metadata.Total - status.Metadata.Used

		status.SectorSize = blockSizeInSectors * 512

		if check, _ := devices.isRealFile(devices.dataLoopFile); check {
			actualSpace, err := devices.getUnderlyingAvailableSpace(devices.dataLoopFile)
			if err == nil && actualSpace < status.Data.Available {
				status.Data.Available = actualSpace
			}
		}

		if check, _ := devices.isRealFile(devices.metadataLoopFile); check {
			actualSpace, err := devices.getUnderlyingAvailableSpace(devices.metadataLoopFile)
			if err == nil && actualSpace < status.Metadata.Available {
				status.Metadata.Available = actualSpace
			}
		}
	}

	return status
}
예제 #3
0
func (devices *DeviceSet) initDevmapper(doInit bool) error {
	if os.Getenv("DEBUG") != "" {
		devicemapper.LogInitVerbose(devicemapper.LogLevelDebug)
	} else {
		devicemapper.LogInitVerbose(devicemapper.LogLevelWarn)
	}
	// give ourselves to libdm as a log handler
	devicemapper.LogInit(devices)

	_, err := devicemapper.GetDriverVersion()
	if err != nil {
		// Can't even get driver version, assume not supported
		return graphdriver.ErrNotSupported
	}

	// https://github.com/docker/docker/issues/4036
	if supported := devicemapper.UdevSetSyncSupport(true); !supported {
		log.Warnf("WARNING: Udev sync is not supported. This will lead to unexpected behavior, data loss and errors")
	}
	log.Debugf("devicemapper: udev sync support: %v", devicemapper.UdevSyncSupported())

	if err := os.MkdirAll(devices.metadataDir(), 0700); err != nil && !os.IsExist(err) {
		return err
	}

	// Set the device prefix from the device id and inode of the docker root dir

	st, err := os.Stat(devices.root)
	if err != nil {
		return fmt.Errorf("Error looking up dir %s: %s", devices.root, err)
	}
	sysSt := st.Sys().(*syscall.Stat_t)
	// "reg-" stands for "regular file".
	// In the future we might use "dev-" for "device file", etc.
	// docker-maj,min[-inode] stands for:
	//	- Managed by docker
	//	- The target of this device is at major <maj> and minor <min>
	//	- If <inode> is defined, use that file inside the device as a loopback image. Otherwise use the device itself.
	devices.devicePrefix = fmt.Sprintf("docker-%d:%d-%d", major(sysSt.Dev), minor(sysSt.Dev), sysSt.Ino)
	log.Debugf("Generated prefix: %s", devices.devicePrefix)

	// Check for the existence of the thin-pool device
	log.Debugf("Checking for existence of the pool '%s'", devices.getPoolName())
	info, err := devicemapper.GetInfo(devices.getPoolName())
	if info == nil {
		log.Debugf("Error device devicemapper.GetInfo: %s", err)
		return err
	}

	// It seems libdevmapper opens this without O_CLOEXEC, and go exec will not close files
	// that are not Close-on-exec, and lxc-start will die if it inherits any unexpected files,
	// so we add this badhack to make sure it closes itself
	setCloseOnExec("/dev/mapper/control")

	// Make sure the sparse images exist in <root>/devicemapper/data and
	// <root>/devicemapper/metadata

	createdLoopback := false

	// If the pool doesn't exist, create it
	if info.Exists == 0 && devices.thinPoolDevice == "" {
		log.Debugf("Pool doesn't exist. Creating it.")

		var (
			dataFile     *os.File
			metadataFile *os.File
		)

		if devices.dataDevice == "" {
			// Make sure the sparse images exist in <root>/devicemapper/data

			hasData := devices.hasImage("data")

			if !doInit && !hasData {
				return errors.New("Loopback data file not found")
			}

			if !hasData {
				createdLoopback = true
			}

			data, err := devices.ensureImage("data", devices.dataLoopbackSize)
			if err != nil {
				log.Debugf("Error device ensureImage (data): %s", err)
				return err
			}

			dataFile, err = devicemapper.AttachLoopDevice(data)
			if err != nil {
				return err
			}
			devices.dataLoopFile = data
			devices.dataDevice = dataFile.Name()
		} else {
			dataFile, err = os.OpenFile(devices.dataDevice, os.O_RDWR, 0600)
			if err != nil {
				return err
			}
		}
		defer dataFile.Close()

		if devices.metadataDevice == "" {
			// Make sure the sparse images exist in <root>/devicemapper/metadata

			hasMetadata := devices.hasImage("metadata")

			if !doInit && !hasMetadata {
				return errors.New("Loopback metadata file not found")
			}

			if !hasMetadata {
				createdLoopback = true
			}

			metadata, err := devices.ensureImage("metadata", devices.metaDataLoopbackSize)
			if err != nil {
				log.Debugf("Error device ensureImage (metadata): %s", err)
				return err
			}

			metadataFile, err = devicemapper.AttachLoopDevice(metadata)
			if err != nil {
				return err
			}
			devices.metadataLoopFile = metadata
			devices.metadataDevice = metadataFile.Name()
		} else {
			metadataFile, err = os.OpenFile(devices.metadataDevice, os.O_RDWR, 0600)
			if err != nil {
				return err
			}
		}
		defer metadataFile.Close()

		if err := devicemapper.CreatePool(devices.getPoolName(), dataFile, metadataFile, devices.thinpBlockSize); err != nil {
			return err
		}
	}

	// If we didn't just create the data or metadata image, we need to
	// load the transaction id and migrate old metadata
	if !createdLoopback {
		if err = devices.initMetaData(); err != nil {
			return err
		}
	}

	// Right now this loads only NextDeviceId. If there is more metatadata
	// down the line, we might have to move it earlier.
	if err = devices.loadDeviceSetMetaData(); err != nil {
		return err
	}

	// Setup the base image
	if doInit {
		if err := devices.setupBaseImage(); err != nil {
			log.Debugf("Error device setupBaseImage: %s", err)
			return err
		}
	}

	return nil
}