예제 #1
0
// InstallFlags adds command-line options to the top-level flag parser for
// the current process.
// Subsequent calls to `flag.Parse` will populate config with values parsed
// from the command-line.
func (config *Config) InstallFlags(cmd *flag.FlagSet, usageFn func(string) string) {
	// First handle install flags which are consistent cross-platform
	config.InstallCommonFlags(cmd, usageFn)

	// Then platform-specific install flags
	cmd.BoolVar(&config.EnableSelinuxSupport, []string{"-selinux-enabled"}, false, usageFn("Enable selinux support"))
	cmd.StringVar(&config.SocketGroup, []string{"G", "-group"}, "docker", usageFn("Group for the unix socket"))
	config.Ulimits = make(map[string]*units.Ulimit)
	cmd.Var(runconfigopts.NewUlimitOpt(&config.Ulimits), []string{"-default-ulimit"}, usageFn("Set default ulimits for containers"))
	cmd.BoolVar(&config.bridgeConfig.EnableIPTables, []string{"#iptables", "-iptables"}, true, usageFn("Enable addition of iptables rules"))
	cmd.BoolVar(&config.bridgeConfig.EnableIPForward, []string{"#ip-forward", "-ip-forward"}, true, usageFn("Enable net.ipv4.ip_forward"))
	cmd.BoolVar(&config.bridgeConfig.EnableIPMasq, []string{"-ip-masq"}, true, usageFn("Enable IP masquerading"))
	cmd.BoolVar(&config.bridgeConfig.EnableIPv6, []string{"-ipv6"}, false, usageFn("Enable IPv6 networking"))
	cmd.StringVar(&config.ExecRoot, []string{"-exec-root"}, defaultExecRoot, usageFn("Root directory for execution state files"))
	cmd.StringVar(&config.bridgeConfig.IP, []string{"#bip", "-bip"}, "", usageFn("Specify network bridge IP"))
	cmd.StringVar(&config.bridgeConfig.Iface, []string{"b", "-bridge"}, "", usageFn("Attach containers to a network bridge"))
	cmd.StringVar(&config.bridgeConfig.FixedCIDR, []string{"-fixed-cidr"}, "", usageFn("IPv4 subnet for fixed IPs"))
	cmd.StringVar(&config.bridgeConfig.FixedCIDRv6, []string{"-fixed-cidr-v6"}, "", usageFn("IPv6 subnet for fixed IPs"))
	cmd.Var(opts.NewIPOpt(&config.bridgeConfig.DefaultGatewayIPv4, ""), []string{"-default-gateway"}, usageFn("Container default gateway IPv4 address"))
	cmd.Var(opts.NewIPOpt(&config.bridgeConfig.DefaultGatewayIPv6, ""), []string{"-default-gateway-v6"}, usageFn("Container default gateway IPv6 address"))
	cmd.BoolVar(&config.bridgeConfig.InterContainerCommunication, []string{"#icc", "-icc"}, true, usageFn("Enable inter-container communication"))
	cmd.Var(opts.NewIPOpt(&config.bridgeConfig.DefaultIP, "0.0.0.0"), []string{"#ip", "-ip"}, usageFn("Default IP when binding container ports"))
	cmd.BoolVar(&config.bridgeConfig.EnableUserlandProxy, []string{"-userland-proxy"}, true, usageFn("Use userland proxy for loopback traffic"))
	cmd.BoolVar(&config.EnableCors, []string{"#api-enable-cors", "#-api-enable-cors"}, false, usageFn("Enable CORS headers in the remote API, this is deprecated by --api-cors-header"))
	cmd.StringVar(&config.CgroupParent, []string{"-cgroup-parent"}, "", usageFn("Set parent cgroup for all containers"))
	cmd.StringVar(&config.RemappedRoot, []string{"-userns-remap"}, "", usageFn("User/Group setting for user namespaces"))
	cmd.StringVar(&config.ContainerdAddr, []string{"-containerd"}, "", usageFn("Path to containerd socket"))
	cmd.BoolVar(&config.LiveRestore, []string{"-live-restore"}, false, usageFn("Enable live restore of docker when containers are still running"))
	config.Runtimes = make(map[string]types.Runtime)
	cmd.Var(runconfigopts.NewNamedRuntimeOpt("runtimes", &config.Runtimes, stockRuntimeName), []string{"-add-runtime"}, usageFn("Register an additional OCI compatible runtime"))
	cmd.StringVar(&config.DefaultRuntime, []string{"-default-runtime"}, stockRuntimeName, usageFn("Default OCI runtime to be used"))
	cmd.IntVar(&config.OOMScoreAdjust, []string{"-oom-score-adjust"}, -500, usageFn("Set the oom_score_adj for the daemon"))

	config.attachExperimentalFlags(cmd, usageFn)
}
// InstallFlags adds command-line options to the top-level flag parser for
// the current process.
// Subsequent calls to `flag.Parse` will populate config with values parsed
// from the command-line.
func (config *Config) InstallFlags(cmd *flag.FlagSet, usageFn func(string) string) {
	// First handle install flags which are consistent cross-platform
	config.InstallCommonFlags(cmd, usageFn)

	// Then platform-specific install flags
	cmd.BoolVar(&config.EnableSelinuxSupport, []string{"-selinux-enabled"}, false, usageFn("Enable selinux support"))
	cmd.StringVar(&config.SocketGroup, []string{"G", "-group"}, "docker", usageFn("Group for the unix socket"))
	config.Ulimits = make(map[string]*units.Ulimit)
	cmd.Var(runconfigopts.NewUlimitOpt(&config.Ulimits), []string{"-default-ulimit"}, usageFn("Set default ulimits for containers"))
	cmd.BoolVar(&config.Bridge.EnableIPTables, []string{"#iptables", "-iptables"}, true, usageFn("Enable addition of iptables rules"))
	cmd.BoolVar(&config.Bridge.EnableIPForward, []string{"#ip-forward", "-ip-forward"}, true, usageFn("Enable net.ipv4.ip_forward"))
	cmd.BoolVar(&config.Bridge.EnableIPMasq, []string{"-ip-masq"}, true, usageFn("Enable IP masquerading"))
	cmd.BoolVar(&config.Bridge.EnableIPv6, []string{"-ipv6"}, false, usageFn("Enable IPv6 networking"))
	cmd.StringVar(&config.Bridge.IP, []string{"#bip", "-bip"}, "", usageFn("Specify network bridge IP"))
	cmd.StringVar(&config.Bridge.Iface, []string{"b", "-bridge"}, "", usageFn("Attach containers to a network bridge"))
	cmd.StringVar(&config.Bridge.FixedCIDR, []string{"-fixed-cidr"}, "", usageFn("IPv4 subnet for fixed IPs"))
	cmd.StringVar(&config.Bridge.FixedCIDRv6, []string{"-fixed-cidr-v6"}, "", usageFn("IPv6 subnet for fixed IPs"))
	cmd.Var(opts.NewIPOpt(&config.Bridge.DefaultGatewayIPv4, ""), []string{"-default-gateway"}, usageFn("Container default gateway IPv4 address"))
	cmd.Var(opts.NewIPOpt(&config.Bridge.DefaultGatewayIPv6, ""), []string{"-default-gateway-v6"}, usageFn("Container default gateway IPv6 address"))
	cmd.BoolVar(&config.Bridge.InterContainerCommunication, []string{"#icc", "-icc"}, true, usageFn("Enable inter-container communication"))
	cmd.Var(opts.NewIPOpt(&config.Bridge.DefaultIP, "0.0.0.0"), []string{"#ip", "-ip"}, usageFn("Default IP when binding container ports"))
	cmd.BoolVar(&config.Bridge.EnableUserlandProxy, []string{"-userland-proxy"}, true, usageFn("Use userland proxy for loopback traffic"))
	cmd.BoolVar(&config.EnableCors, []string{"#api-enable-cors", "#-api-enable-cors"}, false, usageFn("Enable CORS headers in the remote API, this is deprecated by --api-cors-header"))
	cmd.StringVar(&config.CorsHeaders, []string{"-api-cors-header"}, "", usageFn("Set CORS headers in the remote API"))
	cmd.StringVar(&config.CgroupParent, []string{"-cgroup-parent"}, "", usageFn("Set parent cgroup for all containers"))
	cmd.StringVar(&config.RemappedRoot, []string{"-userns-remap"}, "", usageFn("User/Group setting for user namespaces"))

	config.attachExperimentalFlags(cmd, usageFn)
}
예제 #3
0
// InstallFlags adds flags to the pflag.FlagSet to configure the daemon
func (config *Config) InstallFlags(flags *pflag.FlagSet) {
	// First handle install flags which are consistent cross-platform
	config.InstallCommonFlags(flags)

	// Then install flags common to unix platforms
	config.InstallCommonUnixFlags(flags)

	config.Ulimits = make(map[string]*units.Ulimit)

	// Then platform-specific install flags
	flags.BoolVar(&config.EnableSelinuxSupport, "selinux-enabled", false, "Enable selinux support")
	flags.Var(runconfigopts.NewUlimitOpt(&config.Ulimits), "default-ulimit", "Default ulimits for containers")
	flags.BoolVar(&config.bridgeConfig.EnableIPTables, "iptables", true, "Enable addition of iptables rules")
	flags.BoolVar(&config.bridgeConfig.EnableIPForward, "ip-forward", true, "Enable net.ipv4.ip_forward")
	flags.BoolVar(&config.bridgeConfig.EnableIPMasq, "ip-masq", true, "Enable IP masquerading")
	flags.BoolVar(&config.bridgeConfig.EnableIPv6, "ipv6", false, "Enable IPv6 networking")
	flags.StringVar(&config.ExecRoot, "exec-root", defaultExecRoot, "Root directory for execution state files")
	flags.StringVar(&config.bridgeConfig.FixedCIDRv6, "fixed-cidr-v6", "", "IPv6 subnet for fixed IPs")
	flags.BoolVar(&config.bridgeConfig.EnableUserlandProxy, "userland-proxy", true, "Use userland proxy for loopback traffic")
	flags.StringVar(&config.bridgeConfig.UserlandProxyPath, "userland-proxy-path", "", "Path to the userland proxy binary")
	flags.BoolVar(&config.EnableCors, "api-enable-cors", false, "Enable CORS headers in the remote API, this is deprecated by --api-cors-header")
	flags.MarkDeprecated("api-enable-cors", "Please use --api-cors-header")
	flags.StringVar(&config.CgroupParent, "cgroup-parent", "", "Set parent cgroup for all containers")
	flags.StringVar(&config.RemappedRoot, "userns-remap", "", "User/Group setting for user namespaces")
	flags.StringVar(&config.ContainerdAddr, "containerd", "", "Path to containerd socket")
	flags.BoolVar(&config.LiveRestoreEnabled, "live-restore", false, "Enable live restore of docker when containers are still running")
	flags.IntVar(&config.OOMScoreAdjust, "oom-score-adjust", -500, "Set the oom_score_adj for the daemon")
	flags.BoolVar(&config.Init, "init", false, "Run an init in the container to forward signals and reap processes")
	flags.StringVar(&config.InitPath, "init-path", "", "Path to the docker-init binary")
	flags.Int64Var(&config.CPURealtimePeriod, "cpu-rt-period", 0, "Limit the CPU real-time period in microseconds")
	flags.Int64Var(&config.CPURealtimeRuntime, "cpu-rt-runtime", 0, "Limit the CPU real-time runtime in microseconds")
	flags.StringVar(&config.SeccompProfile, "seccomp-profile", "", "Path to seccomp profile")

	config.attachExperimentalFlags(flags)
}
예제 #4
0
파일: build.go 프로젝트: haoshuwei/docker
// NewBuildCommand creates a new `docker build` command
func NewBuildCommand(dockerCli *command.DockerCli) *cobra.Command {
	ulimits := make(map[string]*units.Ulimit)
	options := buildOptions{
		tags:      opts.NewListOpts(validateTag),
		buildArgs: opts.NewListOpts(runconfigopts.ValidateEnv),
		ulimits:   runconfigopts.NewUlimitOpt(&ulimits),
		labels:    opts.NewListOpts(runconfigopts.ValidateEnv),
	}

	cmd := &cobra.Command{
		Use:   "build [OPTIONS] PATH | URL | -",
		Short: "Build an image from a Dockerfile",
		Args:  cli.ExactArgs(1),
		RunE: func(cmd *cobra.Command, args []string) error {
			options.context = args[0]
			return runBuild(dockerCli, options)
		},
	}

	flags := cmd.Flags()

	flags.VarP(&options.tags, "tag", "t", "Name and optionally a tag in the 'name:tag' format")
	flags.Var(&options.buildArgs, "build-arg", "Set build-time variables")
	flags.Var(options.ulimits, "ulimit", "Ulimit options")
	flags.StringVarP(&options.dockerfileName, "file", "f", "", "Name of the Dockerfile (Default is 'PATH/Dockerfile')")
	flags.StringVarP(&options.memory, "memory", "m", "", "Memory limit")
	flags.StringVar(&options.memorySwap, "memory-swap", "", "Swap limit equal to memory plus swap: '-1' to enable unlimited swap")
	flags.StringVar(&options.shmSize, "shm-size", "", "Size of /dev/shm, default value is 64MB")
	flags.Int64VarP(&options.cpuShares, "cpu-shares", "c", 0, "CPU shares (relative weight)")
	flags.Int64Var(&options.cpuPeriod, "cpu-period", 0, "Limit the CPU CFS (Completely Fair Scheduler) period")
	flags.Int64Var(&options.cpuQuota, "cpu-quota", 0, "Limit the CPU CFS (Completely Fair Scheduler) quota")
	flags.StringVar(&options.cpuSetCpus, "cpuset-cpus", "", "CPUs in which to allow execution (0-3, 0,1)")
	flags.StringVar(&options.cpuSetMems, "cpuset-mems", "", "MEMs in which to allow execution (0-3, 0,1)")
	flags.StringVar(&options.cgroupParent, "cgroup-parent", "", "Optional parent cgroup for the container")
	flags.StringVar(&options.isolation, "isolation", "", "Container isolation technology")
	flags.Var(&options.labels, "label", "Set metadata for an image")
	flags.BoolVar(&options.noCache, "no-cache", false, "Do not use cache when building the image")
	flags.BoolVar(&options.rm, "rm", true, "Remove intermediate containers after a successful build")
	flags.BoolVar(&options.forceRm, "force-rm", false, "Always remove intermediate containers")
	flags.BoolVarP(&options.quiet, "quiet", "q", false, "Suppress the build output and print image ID on success")
	flags.BoolVar(&options.pull, "pull", false, "Always attempt to pull a newer version of the image")
	flags.StringSliceVar(&options.cacheFrom, "cache-from", []string{}, "Images to consider as cache sources")
	flags.BoolVar(&options.compress, "compress", false, "Compress the build context using gzip")
	flags.StringSliceVar(&options.securityOpt, "security-opt", []string{}, "Security options")
	flags.StringVar(&options.networkMode, "network", "default", "Connect a container to a network")

	command.AddTrustedFlags(flags, true)

	flags.BoolVar(&options.squash, "squash", false, "Squash newly built layers into a single new layer")
	flags.SetAnnotation("squash", "experimental", nil)
	flags.SetAnnotation("squash", "version", []string{"1.25"})

	return cmd
}
예제 #5
0
// InstallFlags adds flags to the pflag.FlagSet to configure the daemon
func (config *Config) InstallFlags(flags *pflag.FlagSet) {
	// First handle install flags which are consistent cross-platform
	config.InstallCommonFlags(flags)

	config.Ulimits = make(map[string]*units.Ulimit)
	config.Runtimes = make(map[string]types.Runtime)

	// Then platform-specific install flags
	flags.BoolVar(&config.EnableSelinuxSupport, "selinux-enabled", false, "Enable selinux support")
	flags.StringVarP(&config.SocketGroup, "group", "G", "docker", "Group for the unix socket")
	flags.Var(runconfigopts.NewUlimitOpt(&config.Ulimits), "default-ulimit", "Default ulimits for containers")
	flags.BoolVar(&config.bridgeConfig.EnableIPTables, "iptables", true, "Enable addition of iptables rules")
	flags.BoolVar(&config.bridgeConfig.EnableIPForward, "ip-forward", true, "Enable net.ipv4.ip_forward")
	flags.BoolVar(&config.bridgeConfig.EnableIPMasq, "ip-masq", true, "Enable IP masquerading")
	flags.BoolVar(&config.bridgeConfig.EnableIPv6, "ipv6", false, "Enable IPv6 networking")
	flags.StringVar(&config.ExecRoot, "exec-root", defaultExecRoot, "Root directory for execution state files")
	flags.StringVar(&config.bridgeConfig.IP, "bip", "", "Specify network bridge IP")
	flags.StringVarP(&config.bridgeConfig.Iface, "bridge", "b", "", "Attach containers to a network bridge")
	flags.StringVar(&config.bridgeConfig.FixedCIDR, "fixed-cidr", "", "IPv4 subnet for fixed IPs")
	flags.StringVar(&config.bridgeConfig.FixedCIDRv6, "fixed-cidr-v6", "", "IPv6 subnet for fixed IPs")
	flags.Var(opts.NewIPOpt(&config.bridgeConfig.DefaultGatewayIPv4, ""), "default-gateway", "Container default gateway IPv4 address")
	flags.Var(opts.NewIPOpt(&config.bridgeConfig.DefaultGatewayIPv6, ""), "default-gateway-v6", "Container default gateway IPv6 address")
	flags.BoolVar(&config.bridgeConfig.InterContainerCommunication, "icc", true, "Enable inter-container communication")
	flags.Var(opts.NewIPOpt(&config.bridgeConfig.DefaultIP, "0.0.0.0"), "ip", "Default IP when binding container ports")
	flags.BoolVar(&config.bridgeConfig.EnableUserlandProxy, "userland-proxy", true, "Use userland proxy for loopback traffic")
	flags.StringVar(&config.bridgeConfig.UserlandProxyPath, "userland-proxy-path", "", "Path to the userland proxy binary")
	flags.BoolVar(&config.EnableCors, "api-enable-cors", false, "Enable CORS headers in the remote API, this is deprecated by --api-cors-header")
	flags.MarkDeprecated("api-enable-cors", "Please use --api-cors-header")
	flags.StringVar(&config.CgroupParent, "cgroup-parent", "", "Set parent cgroup for all containers")
	flags.StringVar(&config.RemappedRoot, "userns-remap", "", "User/Group setting for user namespaces")
	flags.StringVar(&config.ContainerdAddr, "containerd", "", "Path to containerd socket")
	flags.BoolVar(&config.LiveRestoreEnabled, "live-restore", false, "Enable live restore of docker when containers are still running")
	flags.Var(runconfigopts.NewNamedRuntimeOpt("runtimes", &config.Runtimes, stockRuntimeName), "add-runtime", "Register an additional OCI compatible runtime")
	flags.StringVar(&config.DefaultRuntime, "default-runtime", stockRuntimeName, "Default OCI runtime for containers")
	flags.IntVar(&config.OOMScoreAdjust, "oom-score-adjust", -500, "Set the oom_score_adj for the daemon")
	flags.BoolVar(&config.Init, "init", false, "Run an init in the container to forward signals and reap processes")
	flags.StringVar(&config.InitPath, "init-path", "", "Path to the docker-init binary")

	config.attachExperimentalFlags(flags)
}
예제 #6
0
// CmdBuild builds a new image from the source code at a given path.
//
// If '-' is provided instead of a path or URL, Docker will build an image from either a Dockerfile or tar archive read from STDIN.
//
// Usage: docker build [OPTIONS] PATH | URL | -
func (cli *DockerCli) CmdBuild(args ...string) error {
	cmd := Cli.Subcmd("build", []string{"PATH | URL | -"}, Cli.DockerCommands["build"].Description, true)
	flTags := opts.NewListOpts(validateTag)
	cmd.Var(&flTags, []string{"t", "-tag"}, "Name and optionally a tag in the 'name:tag' format")
	suppressOutput := cmd.Bool([]string{"q", "-quiet"}, false, "Suppress the build output and print image ID on success")
	noCache := cmd.Bool([]string{"-no-cache"}, false, "Do not use cache when building the image")
	rm := cmd.Bool([]string{"-rm"}, true, "Remove intermediate containers after a successful build")
	forceRm := cmd.Bool([]string{"-force-rm"}, false, "Always remove intermediate containers")
	pull := cmd.Bool([]string{"-pull"}, false, "Always attempt to pull a newer version of the image")
	dockerfileName := cmd.String([]string{"f", "-file"}, "", "Name of the Dockerfile (Default is 'PATH/Dockerfile')")
	flMemoryString := cmd.String([]string{"m", "-memory"}, "", "Memory limit")
	flMemorySwap := cmd.String([]string{"-memory-swap"}, "", "Swap limit equal to memory plus swap: '-1' to enable unlimited swap")
	flShmSize := cmd.String([]string{"-shm-size"}, "", "Size of /dev/shm, default value is 64MB")
	flCPUShares := cmd.Int64([]string{"#c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
	flCPUPeriod := cmd.Int64([]string{"-cpu-period"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) period")
	flCPUQuota := cmd.Int64([]string{"-cpu-quota"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) quota")
	flCPUSetCpus := cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
	flCPUSetMems := cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
	flCgroupParent := cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
	flBuildArg := opts.NewListOpts(runconfigopts.ValidateEnv)
	cmd.Var(&flBuildArg, []string{"-build-arg"}, "Set build-time variables")
	isolation := cmd.String([]string{"-isolation"}, "", "Container isolation level")

	ulimits := make(map[string]*units.Ulimit)
	flUlimits := runconfigopts.NewUlimitOpt(&ulimits)
	cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")

	cmd.Require(flag.Exact, 1)

	// For trusted pull on "FROM <image>" instruction.
	addTrustedFlags(cmd, true)

	cmd.ParseFlags(args, true)

	var (
		context  io.ReadCloser
		isRemote bool
		err      error
	)

	_, err = exec.LookPath("git")
	hasGit := err == nil

	specifiedContext := cmd.Arg(0)

	var (
		contextDir    string
		tempDir       string
		relDockerfile string
		progBuff      io.Writer
		buildBuff     io.Writer
	)

	progBuff = cli.out
	buildBuff = cli.out
	if *suppressOutput {
		progBuff = bytes.NewBuffer(nil)
		buildBuff = bytes.NewBuffer(nil)
	}

	switch {
	case specifiedContext == "-":
		context, relDockerfile, err = getContextFromReader(cli.in, *dockerfileName)
	case urlutil.IsGitURL(specifiedContext) && hasGit:
		tempDir, relDockerfile, err = getContextFromGitURL(specifiedContext, *dockerfileName)
	case urlutil.IsURL(specifiedContext):
		context, relDockerfile, err = getContextFromURL(progBuff, specifiedContext, *dockerfileName)
	default:
		contextDir, relDockerfile, err = getContextFromLocalDir(specifiedContext, *dockerfileName)
	}

	if err != nil {
		if *suppressOutput && urlutil.IsURL(specifiedContext) {
			fmt.Fprintln(cli.err, progBuff)
		}
		return fmt.Errorf("unable to prepare context: %s", err)
	}

	if tempDir != "" {
		defer os.RemoveAll(tempDir)
		contextDir = tempDir
	}

	if context == nil {
		// And canonicalize dockerfile name to a platform-independent one
		relDockerfile, err = archive.CanonicalTarNameForPath(relDockerfile)
		if err != nil {
			return fmt.Errorf("cannot canonicalize dockerfile path %s: %v", relDockerfile, err)
		}

		f, err := os.Open(filepath.Join(contextDir, ".dockerignore"))
		if err != nil && !os.IsNotExist(err) {
			return err
		}

		var excludes []string
		if err == nil {
			excludes, err = dockerignore.ReadAll(f)
			if err != nil {
				return err
			}
		}

		if err := validateContextDirectory(contextDir, excludes); err != nil {
			return fmt.Errorf("Error checking context: '%s'.", err)
		}

		// If .dockerignore mentions .dockerignore or the Dockerfile
		// then make sure we send both files over to the daemon
		// because Dockerfile is, obviously, needed no matter what, and
		// .dockerignore is needed to know if either one needs to be
		// removed. The daemon will remove them for us, if needed, after it
		// parses the Dockerfile. Ignore errors here, as they will have been
		// caught by validateContextDirectory above.
		var includes = []string{"."}
		keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
		keepThem2, _ := fileutils.Matches(relDockerfile, excludes)
		if keepThem1 || keepThem2 {
			includes = append(includes, ".dockerignore", relDockerfile)
		}

		context, err = archive.TarWithOptions(contextDir, &archive.TarOptions{
			Compression:     archive.Uncompressed,
			ExcludePatterns: excludes,
			IncludeFiles:    includes,
		})
		if err != nil {
			return err
		}
	}

	var resolvedTags []*resolvedTag
	if isTrusted() {
		// Wrap the tar archive to replace the Dockerfile entry with the rewritten
		// Dockerfile which uses trusted pulls.
		context = replaceDockerfileTarWrapper(context, relDockerfile, cli.trustedReference, &resolvedTags)
	}

	// Setup an upload progress bar
	progressOutput := streamformatter.NewStreamFormatter().NewProgressOutput(progBuff, true)

	var body io.Reader = progress.NewProgressReader(context, progressOutput, 0, "", "Sending build context to Docker daemon")

	var memory int64
	if *flMemoryString != "" {
		parsedMemory, err := units.RAMInBytes(*flMemoryString)
		if err != nil {
			return err
		}
		memory = parsedMemory
	}

	var memorySwap int64
	if *flMemorySwap != "" {
		if *flMemorySwap == "-1" {
			memorySwap = -1
		} else {
			parsedMemorySwap, err := units.RAMInBytes(*flMemorySwap)
			if err != nil {
				return err
			}
			memorySwap = parsedMemorySwap
		}
	}

	var shmSize int64
	if *flShmSize != "" {
		shmSize, err = units.RAMInBytes(*flShmSize)
		if err != nil {
			return err
		}
	}

	var remoteContext string
	if isRemote {
		remoteContext = cmd.Arg(0)
	}

	options := types.ImageBuildOptions{
		Context:        body,
		Memory:         memory,
		MemorySwap:     memorySwap,
		Tags:           flTags.GetAll(),
		SuppressOutput: *suppressOutput,
		RemoteContext:  remoteContext,
		NoCache:        *noCache,
		Remove:         *rm,
		ForceRemove:    *forceRm,
		PullParent:     *pull,
		IsolationLevel: container.IsolationLevel(*isolation),
		CPUSetCPUs:     *flCPUSetCpus,
		CPUSetMems:     *flCPUSetMems,
		CPUShares:      *flCPUShares,
		CPUQuota:       *flCPUQuota,
		CPUPeriod:      *flCPUPeriod,
		CgroupParent:   *flCgroupParent,
		Dockerfile:     relDockerfile,
		ShmSize:        shmSize,
		Ulimits:        flUlimits.GetList(),
		BuildArgs:      runconfigopts.ConvertKVStringsToMap(flBuildArg.GetAll()),
		AuthConfigs:    cli.configFile.AuthConfigs,
	}

	response, err := cli.client.ImageBuild(options)
	if err != nil {
		return err
	}

	err = jsonmessage.DisplayJSONMessagesStream(response.Body, buildBuff, cli.outFd, cli.isTerminalOut, nil)
	if err != nil {
		if jerr, ok := err.(*jsonmessage.JSONError); ok {
			// If no error code is set, default to 1
			if jerr.Code == 0 {
				jerr.Code = 1
			}
			if *suppressOutput {
				fmt.Fprintf(cli.err, "%s%s", progBuff, buildBuff)
			}
			return Cli.StatusError{Status: jerr.Message, StatusCode: jerr.Code}
		}
	}

	// Windows: show error message about modified file permissions if the
	// daemon isn't running Windows.
	if response.OSType != "windows" && runtime.GOOS == "windows" {
		fmt.Fprintln(cli.err, `SECURITY WARNING: You are building a Docker image from Windows against a non-Windows Docker host. All files and directories added to build context will have '-rwxr-xr-x' permissions. It is recommended to double check and reset permissions for sensitive files and directories.`)
	}

	// Everything worked so if -q was provided the output from the daemon
	// should be just the image ID and we'll print that to stdout.
	if *suppressOutput {
		fmt.Fprintf(cli.out, "%s", buildBuff)
	}

	if isTrusted() {
		// Since the build was successful, now we must tag any of the resolved
		// images from the above Dockerfile rewrite.
		for _, resolved := range resolvedTags {
			if err := cli.tagTrusted(resolved.digestRef, resolved.tagRef); err != nil {
				return err
			}
		}
	}

	return nil
}
예제 #7
0
파일: parse.go 프로젝트: rpinz/docker
// Parse parses the specified args for the specified command and generates a Config,
// a HostConfig and returns them with the specified command.
// If the specified args are not valid, it will return an error.
func Parse(cmd *flag.FlagSet, args []string) (*container.Config, *container.HostConfig, *flag.FlagSet, error) {
	var (
		// FIXME: use utils.ListOpts for attach and volumes?
		flAttach            = opts.NewListOpts(opts.ValidateAttach)
		flVolumes           = opts.NewListOpts(nil)
		flTmpfs             = opts.NewListOpts(nil)
		flBlkioWeightDevice = runconfigopts.NewWeightdeviceOpt(runconfigopts.ValidateWeightDevice)
		flDeviceReadBps     = runconfigopts.NewThrottledeviceOpt(runconfigopts.ValidateThrottleBpsDevice)
		flDeviceWriteBps    = runconfigopts.NewThrottledeviceOpt(runconfigopts.ValidateThrottleBpsDevice)
		flLinks             = opts.NewListOpts(ValidateLink)
		flDeviceReadIOps    = runconfigopts.NewThrottledeviceOpt(runconfigopts.ValidateThrottleIOpsDevice)
		flDeviceWriteIOps   = runconfigopts.NewThrottledeviceOpt(runconfigopts.ValidateThrottleIOpsDevice)
		flEnv               = opts.NewListOpts(opts.ValidateEnv)
		flLabels            = opts.NewListOpts(opts.ValidateEnv)
		flDevices           = opts.NewListOpts(ValidateDevice)

		flUlimits = runconfigopts.NewUlimitOpt(nil)

		flPublish           = opts.NewListOpts(nil)
		flExpose            = opts.NewListOpts(nil)
		flDNS               = opts.NewListOpts(opts.ValidateIPAddress)
		flDNSSearch         = opts.NewListOpts(opts.ValidateDNSSearch)
		flDNSOptions        = opts.NewListOpts(nil)
		flExtraHosts        = opts.NewListOpts(opts.ValidateExtraHost)
		flVolumesFrom       = opts.NewListOpts(nil)
		flEnvFile           = opts.NewListOpts(nil)
		flCapAdd            = opts.NewListOpts(nil)
		flCapDrop           = opts.NewListOpts(nil)
		flGroupAdd          = opts.NewListOpts(nil)
		flSecurityOpt       = opts.NewListOpts(nil)
		flLabelsFile        = opts.NewListOpts(nil)
		flLoggingOpts       = opts.NewListOpts(nil)
		flPrivileged        = cmd.Bool([]string{"-privileged"}, false, "Give extended privileges to this container")
		flPidMode           = cmd.String([]string{"-pid"}, "", "PID namespace to use")
		flUTSMode           = cmd.String([]string{"-uts"}, "", "UTS namespace to use")
		flPublishAll        = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to random ports")
		flStdin             = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
		flTty               = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
		flOomKillDisable    = cmd.Bool([]string{"-oom-kill-disable"}, false, "Disable OOM Killer")
		flOomScoreAdj       = cmd.Int([]string{"-oom-score-adj"}, 0, "Tune host's OOM preferences (-1000 to 1000)")
		flContainerIDFile   = cmd.String([]string{"-cidfile"}, "", "Write the container ID to the file")
		flEntrypoint        = cmd.String([]string{"-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
		flHostname          = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
		flMemoryString      = cmd.String([]string{"m", "-memory"}, "", "Memory limit")
		flMemoryReservation = cmd.String([]string{"-memory-reservation"}, "", "Memory soft limit")
		flMemorySwap        = cmd.String([]string{"-memory-swap"}, "", "Swap limit equal to memory plus swap: '-1' to enable unlimited swap")
		flKernelMemory      = cmd.String([]string{"-kernel-memory"}, "", "Kernel memory limit")
		flUser              = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
		flWorkingDir        = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
		flCPUShares         = cmd.Int64([]string{"#c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
		flCPUPeriod         = cmd.Int64([]string{"-cpu-period"}, 0, "Limit CPU CFS (Completely Fair Scheduler) period")
		flCPUQuota          = cmd.Int64([]string{"-cpu-quota"}, 0, "Limit CPU CFS (Completely Fair Scheduler) quota")
		flCpusetCpus        = cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
		flCpusetMems        = cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
		flBlkioWeight       = cmd.Uint16([]string{"-blkio-weight"}, 0, "Block IO (relative weight), between 10 and 1000")
		flSwappiness        = cmd.Int64([]string{"-memory-swappiness"}, -1, "Tune container memory swappiness (0 to 100)")
		flNetMode           = cmd.String([]string{"-net"}, "default", "Connect a container to a network")
		flMacAddress        = cmd.String([]string{"-mac-address"}, "", "Container MAC address (e.g. 92:d0:c6:0a:29:33)")
		flIpcMode           = cmd.String([]string{"-ipc"}, "", "IPC namespace to use")
		flRestartPolicy     = cmd.String([]string{"-restart"}, "no", "Restart policy to apply when a container exits")
		flReadonlyRootfs    = cmd.Bool([]string{"-read-only"}, false, "Mount the container's root filesystem as read only")
		flLoggingDriver     = cmd.String([]string{"-log-driver"}, "", "Logging driver for container")
		flCgroupParent      = cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
		flVolumeDriver      = cmd.String([]string{"-volume-driver"}, "", "Optional volume driver for the container")
		flStopSignal        = cmd.String([]string{"-stop-signal"}, signal.DefaultStopSignal, fmt.Sprintf("Signal to stop a container, %v by default", signal.DefaultStopSignal))
		flIsolation         = cmd.String([]string{"-isolation"}, "", "Container isolation level")
		flShmSize           = cmd.String([]string{"-shm-size"}, "", "Size of /dev/shm, default value is 64MB")
	)

	cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR")
	cmd.Var(&flBlkioWeightDevice, []string{"-blkio-weight-device"}, "Block IO weight (relative device weight)")
	cmd.Var(&flDeviceReadBps, []string{"-device-read-bps"}, "Limit read rate (bytes per second) from a device")
	cmd.Var(&flDeviceWriteBps, []string{"-device-write-bps"}, "Limit write rate (bytes per second) to a device")
	cmd.Var(&flDeviceReadIOps, []string{"-device-read-iops"}, "Limit read rate (IO per second) from a device")
	cmd.Var(&flDeviceWriteIOps, []string{"-device-write-iops"}, "Limit write rate (IO per second) to a device")
	cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume")
	cmd.Var(&flTmpfs, []string{"-tmpfs"}, "Mount a tmpfs directory")
	cmd.Var(&flLinks, []string{"-link"}, "Add link to another container")
	cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container")
	cmd.Var(&flLabels, []string{"l", "-label"}, "Set meta data on a container")
	cmd.Var(&flLabelsFile, []string{"-label-file"}, "Read in a line delimited file of labels")
	cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
	cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a file of environment variables")
	cmd.Var(&flPublish, []string{"p", "-publish"}, "Publish a container's port(s) to the host")
	cmd.Var(&flExpose, []string{"-expose"}, "Expose a port or a range of ports")
	cmd.Var(&flDNS, []string{"-dns"}, "Set custom DNS servers")
	cmd.Var(&flDNSSearch, []string{"-dns-search"}, "Set custom DNS search domains")
	cmd.Var(&flDNSOptions, []string{"-dns-opt"}, "Set DNS options")
	cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
	cmd.Var(&flVolumesFrom, []string{"-volumes-from"}, "Mount volumes from the specified container(s)")
	cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
	cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
	cmd.Var(&flGroupAdd, []string{"-group-add"}, "Add additional groups to join")
	cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
	cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")
	cmd.Var(&flLoggingOpts, []string{"-log-opt"}, "Log driver options")

	cmd.Require(flag.Min, 1)

	if err := cmd.ParseFlags(args, true); err != nil {
		return nil, nil, cmd, err
	}

	var (
		attachStdin  = flAttach.Get("stdin")
		attachStdout = flAttach.Get("stdout")
		attachStderr = flAttach.Get("stderr")
	)

	// Validate the input mac address
	if *flMacAddress != "" {
		if _, err := opts.ValidateMACAddress(*flMacAddress); err != nil {
			return nil, nil, cmd, fmt.Errorf("%s is not a valid mac address", *flMacAddress)
		}
	}
	if *flStdin {
		attachStdin = true
	}
	// If -a is not set attach to the output stdio
	if flAttach.Len() == 0 {
		attachStdout = true
		attachStderr = true
	}

	var err error

	var flMemory int64
	if *flMemoryString != "" {
		flMemory, err = units.RAMInBytes(*flMemoryString)
		if err != nil {
			return nil, nil, cmd, err
		}
	}

	var MemoryReservation int64
	if *flMemoryReservation != "" {
		MemoryReservation, err = units.RAMInBytes(*flMemoryReservation)
		if err != nil {
			return nil, nil, cmd, err
		}
	}

	var memorySwap int64
	if *flMemorySwap != "" {
		if *flMemorySwap == "-1" {
			memorySwap = -1
		} else {
			memorySwap, err = units.RAMInBytes(*flMemorySwap)
			if err != nil {
				return nil, nil, cmd, err
			}
		}
	}

	var KernelMemory int64
	if *flKernelMemory != "" {
		KernelMemory, err = units.RAMInBytes(*flKernelMemory)
		if err != nil {
			return nil, nil, cmd, err
		}
	}

	swappiness := *flSwappiness
	if swappiness != -1 && (swappiness < 0 || swappiness > 100) {
		return nil, nil, cmd, fmt.Errorf("Invalid value: %d. Valid memory swappiness range is 0-100", swappiness)
	}

	var parsedShm *int64
	if *flShmSize != "" {
		shmSize, err := units.RAMInBytes(*flShmSize)
		if err != nil {
			return nil, nil, cmd, err
		}
		parsedShm = &shmSize
	}

	var binds []string
	// add any bind targets to the list of container volumes
	for bind := range flVolumes.GetMap() {
		if arr := volume.SplitN(bind, 2); len(arr) > 1 {
			// after creating the bind mount we want to delete it from the flVolumes values because
			// we do not want bind mounts being committed to image configs
			binds = append(binds, bind)
			flVolumes.Delete(bind)
		}
	}

	// Can't evaluate options passed into --tmpfs until we actually mount
	tmpfs := make(map[string]string)
	for _, t := range flTmpfs.GetAll() {
		if arr := strings.SplitN(t, ":", 2); len(arr) > 1 {
			if _, _, err := mount.ParseTmpfsOptions(arr[1]); err != nil {
				return nil, nil, cmd, err
			}
			tmpfs[arr[0]] = arr[1]
		} else {
			tmpfs[arr[0]] = ""
		}
	}

	var (
		parsedArgs = cmd.Args()
		runCmd     *strslice.StrSlice
		entrypoint *strslice.StrSlice
		image      = cmd.Arg(0)
	)
	if len(parsedArgs) > 1 {
		runCmd = strslice.New(parsedArgs[1:]...)
	}
	if *flEntrypoint != "" {
		entrypoint = strslice.New(*flEntrypoint)
	}

	var (
		domainname string
		hostname   = *flHostname
		parts      = strings.SplitN(hostname, ".", 2)
	)
	if len(parts) > 1 {
		hostname = parts[0]
		domainname = parts[1]
	}

	ports, portBindings, err := nat.ParsePortSpecs(flPublish.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	// Merge in exposed ports to the map of published ports
	for _, e := range flExpose.GetAll() {
		if strings.Contains(e, ":") {
			return nil, nil, cmd, fmt.Errorf("Invalid port format for --expose: %s", e)
		}
		//support two formats for expose, original format <portnum>/[<proto>] or <startport-endport>/[<proto>]
		proto, port := nat.SplitProtoPort(e)
		//parse the start and end port and create a sequence of ports to expose
		//if expose a port, the start and end port are the same
		start, end, err := nat.ParsePortRange(port)
		if err != nil {
			return nil, nil, cmd, fmt.Errorf("Invalid range format for --expose: %s, error: %s", e, err)
		}
		for i := start; i <= end; i++ {
			p, err := nat.NewPort(proto, strconv.FormatUint(i, 10))
			if err != nil {
				return nil, nil, cmd, err
			}
			if _, exists := ports[p]; !exists {
				ports[p] = struct{}{}
			}
		}
	}

	// parse device mappings
	deviceMappings := []container.DeviceMapping{}
	for _, device := range flDevices.GetAll() {
		deviceMapping, err := ParseDevice(device)
		if err != nil {
			return nil, nil, cmd, err
		}
		deviceMappings = append(deviceMappings, deviceMapping)
	}

	// collect all the environment variables for the container
	envVariables, err := readKVStrings(flEnvFile.GetAll(), flEnv.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	// collect all the labels for the container
	labels, err := readKVStrings(flLabelsFile.GetAll(), flLabels.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	ipcMode := container.IpcMode(*flIpcMode)
	if !ipcMode.Valid() {
		return nil, nil, cmd, fmt.Errorf("--ipc: invalid IPC mode")
	}

	pidMode := container.PidMode(*flPidMode)
	if !pidMode.Valid() {
		return nil, nil, cmd, fmt.Errorf("--pid: invalid PID mode")
	}

	utsMode := container.UTSMode(*flUTSMode)
	if !utsMode.Valid() {
		return nil, nil, cmd, fmt.Errorf("--uts: invalid UTS mode")
	}

	restartPolicy, err := ParseRestartPolicy(*flRestartPolicy)
	if err != nil {
		return nil, nil, cmd, err
	}

	loggingOpts, err := parseLoggingOpts(*flLoggingDriver, flLoggingOpts.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	resources := container.Resources{
		CgroupParent:         *flCgroupParent,
		Memory:               flMemory,
		MemoryReservation:    MemoryReservation,
		MemorySwap:           memorySwap,
		MemorySwappiness:     flSwappiness,
		KernelMemory:         KernelMemory,
		OomKillDisable:       *flOomKillDisable,
		CPUShares:            *flCPUShares,
		CPUPeriod:            *flCPUPeriod,
		CpusetCpus:           *flCpusetCpus,
		CpusetMems:           *flCpusetMems,
		CPUQuota:             *flCPUQuota,
		BlkioWeight:          *flBlkioWeight,
		BlkioWeightDevice:    flBlkioWeightDevice.GetList(),
		BlkioDeviceReadBps:   flDeviceReadBps.GetList(),
		BlkioDeviceWriteBps:  flDeviceWriteBps.GetList(),
		BlkioDeviceReadIOps:  flDeviceReadIOps.GetList(),
		BlkioDeviceWriteIOps: flDeviceWriteIOps.GetList(),
		Ulimits:              flUlimits.GetList(),
		Devices:              deviceMappings,
	}

	config := &container.Config{
		Hostname:     hostname,
		Domainname:   domainname,
		ExposedPorts: ports,
		User:         *flUser,
		Tty:          *flTty,
		// TODO: deprecated, it comes from -n, --networking
		// it's still needed internally to set the network to disabled
		// if e.g. bridge is none in daemon opts, and in inspect
		NetworkDisabled: false,
		OpenStdin:       *flStdin,
		AttachStdin:     attachStdin,
		AttachStdout:    attachStdout,
		AttachStderr:    attachStderr,
		Env:             envVariables,
		Cmd:             runCmd,
		Image:           image,
		Volumes:         flVolumes.GetMap(),
		MacAddress:      *flMacAddress,
		Entrypoint:      entrypoint,
		WorkingDir:      *flWorkingDir,
		Labels:          ConvertKVStringsToMap(labels),
		StopSignal:      *flStopSignal,
	}

	hostConfig := &container.HostConfig{
		Binds:           binds,
		ContainerIDFile: *flContainerIDFile,
		OomScoreAdj:     *flOomScoreAdj,
		Privileged:      *flPrivileged,
		PortBindings:    portBindings,
		Links:           flLinks.GetAll(),
		PublishAllPorts: *flPublishAll,
		// Make sure the dns fields are never nil.
		// New containers don't ever have those fields nil,
		// but pre created containers can still have those nil values.
		// See https://github.com/docker/docker/pull/17779
		// for a more detailed explanation on why we don't want that.
		DNS:            flDNS.GetAllOrEmpty(),
		DNSSearch:      flDNSSearch.GetAllOrEmpty(),
		DNSOptions:     flDNSOptions.GetAllOrEmpty(),
		ExtraHosts:     flExtraHosts.GetAll(),
		VolumesFrom:    flVolumesFrom.GetAll(),
		NetworkMode:    container.NetworkMode(*flNetMode),
		IpcMode:        ipcMode,
		PidMode:        pidMode,
		UTSMode:        utsMode,
		CapAdd:         strslice.New(flCapAdd.GetAll()...),
		CapDrop:        strslice.New(flCapDrop.GetAll()...),
		GroupAdd:       flGroupAdd.GetAll(),
		RestartPolicy:  restartPolicy,
		SecurityOpt:    flSecurityOpt.GetAll(),
		ReadonlyRootfs: *flReadonlyRootfs,
		LogConfig:      container.LogConfig{Type: *flLoggingDriver, Config: loggingOpts},
		VolumeDriver:   *flVolumeDriver,
		Isolation:      container.IsolationLevel(*flIsolation),
		ShmSize:        parsedShm,
		Resources:      resources,
		Tmpfs:          tmpfs,
	}

	// When allocating stdin in attached mode, close stdin at client disconnect
	if config.OpenStdin && config.AttachStdin {
		config.StdinOnce = true
	}
	return config, hostConfig, cmd, nil
}