func NewBatchRequest(operation string) (*http.Request, error) {
endpoint := config.Config.Endpoint(operation)
res, err := auth.SshAuthenticate(endpoint, operation, "")
if err != nil {
tracerx.Printf("ssh: %s attempted with %s. Error: %s",
operation, endpoint.SshUserAndHost, err.Error(),
)
return nil, err
}
if len(res.Href) > 0 {
endpoint.Url = res.Href
}
u, err := ObjectUrl(endpoint, "batch")
if err != nil {
return nil, err
}
req, err := httputil.NewHttpRequest("POST", u.String(), nil)
if err != nil {
return nil, err
}
req.Header.Set("Accept", MediaType)
if res.Header != nil {
for key, value := range res.Header {
req.Header.Set(key, value)
}
}
return req, nil
}
func NewRequest(cfg *config.Configuration, method, oid string) (*http.Request, error) {
objectOid := oid
operation := "download"
if method == "POST" {
if oid != "batch" {
objectOid = ""
operation = "upload"
}
}
res, endpoint, err := auth.SshAuthenticate(cfg, operation, oid)
if err != nil {
tracerx.Printf("ssh: attempted with %s. Error: %s",
endpoint.SshUserAndHost, err.Error(),
)
return nil, err
}
if len(res.Href) > 0 {
endpoint.Url = res.Href
}
u, err := ObjectUrl(endpoint, objectOid)
if err != nil {
return nil, err
}
req, err := httputil.NewHttpRequest(method, u.String(), res.Header)
if err != nil {
return nil, err
}
req.Header.Set("Accept", MediaType)
return req, nil
}
func performDownload(oid string, size int64, a *action, writer, errWriter *bufio.Writer) {
// We just use the URLs we're given, so we're just a proxy for the direct method
// but this is enough to test intermediate custom adapters
req, err := httputil.NewHttpRequest("GET", a.Href, a.Header)
if err != nil {
sendTransferError(oid, 2, err.Error(), writer, errWriter)
return
}
res, err := httputil.DoHttpRequest(cfg, req, true)
if err != nil {
sendTransferError(oid, res.StatusCode, err.Error(), writer, errWriter)
return
}
defer res.Body.Close()
dlFile, err := ioutil.TempFile("", "lfscustomdl")
if err != nil {
sendTransferError(oid, 3, err.Error(), writer, errWriter)
return
}
defer dlFile.Close()
dlfilename := dlFile.Name()
// Turn callback into progress messages
cb := func(totalSize int64, readSoFar int64, readSinceLast int) error {
sendProgress(oid, readSoFar, readSinceLast, writer, errWriter)
return nil
}
_, err = tools.CopyWithCallback(dlFile, res.Body, res.ContentLength, cb)
if err != nil {
sendTransferError(oid, 4, fmt.Sprintf("cannot write data to tempfile %q: %v", dlfilename, err), writer, errWriter)
os.Remove(dlfilename)
return
}
if err := dlFile.Close(); err != nil {
sendTransferError(oid, 5, fmt.Sprintf("can't close tempfile %q: %v", dlfilename, err), writer, errWriter)
os.Remove(dlfilename)
return
}
// completed
complete := &transferResponse{"complete", oid, dlfilename, nil}
err = sendResponse(complete, writer, errWriter)
if err != nil {
writeToStderr(fmt.Sprintf("Unable to send completion message: %v\n", err), errWriter)
}
}
// TODO LEGACY API: remove when legacy API removed
func (o *ObjectResource) NewRequest(relation, method string) (*http.Request, error) {
rel, ok := o.Rel(relation)
if !ok {
if relation == "download" {
return nil, errors.New("Object not found on the server.")
}
return nil, fmt.Errorf("No %q action for this object.", relation)
}
req, err := httputil.NewHttpRequest(method, rel.Href, rel.Header)
if err != nil {
return nil, err
}
return req, nil
}
func performUpload(oid string, size int64, a *action, fromPath string, writer, errWriter *bufio.Writer) {
// We just use the URLs we're given, so we're just a proxy for the direct method
// but this is enough to test intermediate custom adapters
req, err := httputil.NewHttpRequest("PUT", a.Href, a.Header)
if err != nil {
sendTransferError(oid, 2, err.Error(), writer, errWriter)
return
}
if len(req.Header.Get("Content-Type")) == 0 {
req.Header.Set("Content-Type", "application/octet-stream")
}
if req.Header.Get("Transfer-Encoding") == "chunked" {
req.TransferEncoding = []string{"chunked"}
} else {
req.Header.Set("Content-Length", strconv.FormatInt(size, 10))
}
req.ContentLength = size
f, err := os.OpenFile(fromPath, os.O_RDONLY, 0644)
if err != nil {
sendTransferError(oid, 3, fmt.Sprintf("Cannot read data from %q: %v", fromPath, err), writer, errWriter)
return
}
defer f.Close()
// Turn callback into progress messages
cb := func(totalSize int64, readSoFar int64, readSinceLast int) error {
sendProgress(oid, readSoFar, readSinceLast, writer, errWriter)
return nil
}
var reader io.Reader
reader = &progress.CallbackReader{
C: cb,
TotalSize: size,
Reader: f,
}
req.Body = ioutil.NopCloser(reader)
res, err := httputil.DoHttpRequest(cfg, req, true)
if err != nil {
sendTransferError(oid, res.StatusCode, fmt.Sprintf("Error uploading data for %s: %v", oid, err), writer, errWriter)
return
}
if res.StatusCode > 299 {
sendTransferError(oid, res.StatusCode, fmt.Sprintf("Invalid status for %s: %d", httputil.TraceHttpReq(req), res.StatusCode), writer, errWriter)
return
}
io.Copy(ioutil.Discard, res.Body)
res.Body.Close()
// completed
complete := &transferResponse{"complete", oid, "", nil}
err = sendResponse(complete, writer, errWriter)
if err != nil {
writeToStderr(fmt.Sprintf("Unable to send completion message: %v\n", err), errWriter)
}
}
// download starts or resumes and download. Always closes dlFile if non-nil
func (a *basicDownloadAdapter) download(t *Transfer, cb TransferProgressCallback, authOkFunc func(), dlFile *os.File, fromByte int64, hash hash.Hash) error {
if dlFile != nil {
// ensure we always close dlFile. Note that this does not conflict with the
// early close below, as close is idempotent.
defer dlFile.Close()
}
rel, ok := t.Object.Rel("download")
if !ok {
return errors.New("Object not found on the server.")
}
req, err := httputil.NewHttpRequest("GET", rel.Href, rel.Header)
if err != nil {
return err
}
if fromByte > 0 {
if dlFile == nil || hash == nil {
return fmt.Errorf("Cannot restart %v from %d without a file & hash", t.Object.Oid, fromByte)
}
// We could just use a start byte, but since we know the length be specific
req.Header.Set("Range", fmt.Sprintf("bytes=%d-%d", fromByte, t.Object.Size-1))
}
res, err := httputil.DoHttpRequest(req, true)
if err != nil {
// Special-case status code 416 () - fall back
if fromByte > 0 && dlFile != nil && res.StatusCode == 416 {
tracerx.Printf("xfer: server rejected resume download request for %q from byte %d; re-downloading from start", t.Object.Oid, fromByte)
dlFile.Close()
os.Remove(dlFile.Name())
return a.download(t, cb, authOkFunc, nil, 0, nil)
}
return errutil.NewRetriableError(err)
}
httputil.LogTransfer("lfs.data.download", res)
defer res.Body.Close()
// Range request must return 206 & content range to confirm
if fromByte > 0 {
rangeRequestOk := false
var failReason string
// check 206 and Content-Range, fall back if either not as expected
if res.StatusCode == 206 {
// Probably a successful range request, check Content-Range
if rangeHdr := res.Header.Get("Content-Range"); rangeHdr != "" {
regex := regexp.MustCompile(`bytes (\d+)\-.*`)
match := regex.FindStringSubmatch(rangeHdr)
if match != nil && len(match) > 1 {
contentStart, _ := strconv.ParseInt(match[1], 10, 64)
if contentStart == fromByte {
rangeRequestOk = true
} else {
failReason = fmt.Sprintf("Content-Range start byte incorrect: %s expected %d", match[1], fromByte)
}
} else {
failReason = fmt.Sprintf("badly formatted Content-Range header: %q", rangeHdr)
}
} else {
failReason = "missing Content-Range header in response"
}
} else {
failReason = fmt.Sprintf("expected status code 206, received %d", res.StatusCode)
}
if rangeRequestOk {
tracerx.Printf("xfer: server accepted resume download request: %q from byte %d", t.Object.Oid, fromByte)
// Advance progress callback; must split into max int sizes though
if cb != nil {
const maxInt = int(^uint(0) >> 1)
for read := int64(0); read < fromByte; {
remainder := fromByte - read
if remainder > int64(maxInt) {
read += int64(maxInt)
cb(t.Name, t.Object.Size, read, maxInt)
} else {
read += remainder
cb(t.Name, t.Object.Size, read, int(remainder))
}
}
}
} else {
// Abort resume, perform regular download
tracerx.Printf("xfer: failed to resume download for %q from byte %d: %s. Re-downloading from start", t.Object.Oid, fromByte, failReason)
dlFile.Close()
os.Remove(dlFile.Name())
if res.StatusCode == 200 {
// If status code was 200 then server just ignored Range header and
// sent everything. Don't re-request, use this one from byte 0
dlFile = nil
fromByte = 0
hash = nil
} else {
// re-request needed
return a.download(t, cb, authOkFunc, nil, 0, nil)
}
}
}
// Signal auth OK on success response, before starting download to free up
// other workers immediately
if authOkFunc != nil {
authOkFunc()
}
var hasher *tools.HashingReader
if fromByte > 0 && hash != nil {
// pre-load hashing reader with previous content
hasher = tools.NewHashingReaderPreloadHash(res.Body, hash)
} else {
hasher = tools.NewHashingReader(res.Body)
}
if dlFile == nil {
// New file start
dlFile, err = os.OpenFile(a.downloadFilename(t), os.O_WRONLY|os.O_CREATE|os.O_TRUNC, 0644)
if err != nil {
return err
}
defer dlFile.Close()
}
dlfilename := dlFile.Name()
// Wrap callback to give name context
ccb := func(totalSize int64, readSoFar int64, readSinceLast int) error {
if cb != nil {
return cb(t.Name, totalSize, readSoFar+fromByte, readSinceLast)
}
return nil
}
written, err := tools.CopyWithCallback(dlFile, hasher, res.ContentLength, ccb)
if err != nil {
return fmt.Errorf("cannot write data to tempfile %q: %v", dlfilename, err)
}
if err := dlFile.Close(); err != nil {
return fmt.Errorf("can't close tempfile %q: %v", dlfilename, err)
}
if actual := hasher.Hash(); actual != t.Object.Oid {
return fmt.Errorf("Expected OID %s, got %s after %d bytes written", t.Object.Oid, actual, written)
}
return tools.RenameFileCopyPermissions(dlfilename, t.Path)
}
func (a *basicUploadAdapter) DoTransfer(t *Transfer, cb TransferProgressCallback, authOkFunc func()) error {
rel, ok := t.Object.Rel("upload")
if !ok {
return fmt.Errorf("No upload action for this object.")
}
req, err := httputil.NewHttpRequest("PUT", rel.Href, rel.Header)
if err != nil {
return err
}
if len(req.Header.Get("Content-Type")) == 0 {
req.Header.Set("Content-Type", "application/octet-stream")
}
if req.Header.Get("Transfer-Encoding") == "chunked" {
req.TransferEncoding = []string{"chunked"}
} else {
req.Header.Set("Content-Length", strconv.FormatInt(t.Object.Size, 10))
}
req.ContentLength = t.Object.Size
f, err := os.OpenFile(t.Path, os.O_RDONLY, 0644)
if err != nil {
return errutil.Error(err)
}
defer f.Close()
// Ensure progress callbacks made while uploading
// Wrap callback to give name context
ccb := func(totalSize int64, readSoFar int64, readSinceLast int) error {
if cb != nil {
return cb(t.Name, totalSize, readSoFar, readSinceLast)
}
return nil
}
var reader io.Reader
reader = &progress.CallbackReader{
C: ccb,
TotalSize: t.Object.Size,
Reader: f,
}
// Signal auth was ok on first read; this frees up other workers to start
if authOkFunc != nil {
reader = newStartCallbackReader(reader, func(*startCallbackReader) {
authOkFunc()
})
}
req.Body = ioutil.NopCloser(reader)
res, err := httputil.DoHttpRequest(req, true)
if err != nil {
return errutil.NewRetriableError(err)
}
httputil.LogTransfer("lfs.data.upload", res)
// A status code of 403 likely means that an authentication token for the
// upload has expired. This can be safely retried.
if res.StatusCode == 403 {
return errutil.NewRetriableError(err)
}
if res.StatusCode > 299 {
return errutil.Errorf(nil, "Invalid status for %s: %d", httputil.TraceHttpReq(req), res.StatusCode)
}
io.Copy(ioutil.Discard, res.Body)
res.Body.Close()
return api.VerifyUpload(t.Object)
}
func (a *tusUploadAdapter) DoTransfer(ctx interface{}, t *Transfer, cb TransferProgressCallback, authOkFunc func()) error {
rel, ok := t.Object.Rel("upload")
if !ok {
return fmt.Errorf("No upload action for this object.")
}
// Note not supporting the Creation extension since the batch API generates URLs
// Also not supporting Concatenation to support parallel uploads of chunks; forward only
// 1. Send HEAD request to determine upload start point
// Request must include Tus-Resumable header (version)
tracerx.Printf("xfer: sending tus.io HEAD request for %q", t.Object.Oid)
req, err := httputil.NewHttpRequest("HEAD", rel.Href, rel.Header)
if err != nil {
return err
}
req.Header.Set("Tus-Resumable", TusVersion)
res, err := httputil.DoHttpRequest(config.Config, req, false)
if err != nil {
return errors.NewRetriableError(err)
}
// Response will contain Upload-Offset if supported
offHdr := res.Header.Get("Upload-Offset")
if len(offHdr) == 0 {
return fmt.Errorf("Missing Upload-Offset header from tus.io HEAD response at %q, contact server admin", rel.Href)
}
offset, err := strconv.ParseInt(offHdr, 10, 64)
if err != nil || offset < 0 {
return fmt.Errorf("Invalid Upload-Offset value %q in response from tus.io HEAD at %q, contact server admin", offHdr, rel.Href)
}
// Upload-Offset=size means already completed (skip)
// Batch API will probably already detect this, but handle just in case
if offset >= t.Object.Size {
tracerx.Printf("xfer: tus.io HEAD offset %d indicates %q is already fully uploaded, skipping", offset, t.Object.Oid)
advanceCallbackProgress(cb, t, t.Object.Size)
return nil
}
// Open file for uploading
f, err := os.OpenFile(t.Path, os.O_RDONLY, 0644)
if err != nil {
return errors.Wrap(err, "tus upload")
}
defer f.Close()
// Upload-Offset=0 means start from scratch, but still send PATCH
if offset == 0 {
tracerx.Printf("xfer: tus.io uploading %q from start", t.Object.Oid)
} else {
tracerx.Printf("xfer: tus.io resuming upload %q from %d", t.Object.Oid, offset)
advanceCallbackProgress(cb, t, offset)
_, err := f.Seek(offset, os.SEEK_CUR)
if err != nil {
return errors.Wrap(err, "tus upload")
}
}
// 2. Send PATCH request with byte start point (even if 0) in Upload-Offset
// Response status must be 204
// Response Upload-Offset must be request Upload-Offset plus sent bytes
// Response may include Upload-Expires header in which case check not passed
tracerx.Printf("xfer: sending tus.io PATCH request for %q", t.Object.Oid)
req, err = httputil.NewHttpRequest("PATCH", rel.Href, rel.Header)
if err != nil {
return err
}
req.Header.Set("Tus-Resumable", TusVersion)
req.Header.Set("Upload-Offset", strconv.FormatInt(offset, 10))
req.Header.Set("Content-Type", "application/offset+octet-stream")
req.Header.Set("Content-Length", strconv.FormatInt(t.Object.Size-offset, 10))
req.ContentLength = t.Object.Size - offset
// Ensure progress callbacks made while uploading
// Wrap callback to give name context
ccb := func(totalSize int64, readSoFar int64, readSinceLast int) error {
if cb != nil {
return cb(t.Name, totalSize, readSoFar, readSinceLast)
}
return nil
}
var reader io.Reader
reader = &progress.CallbackReader{
C: ccb,
TotalSize: t.Object.Size,
Reader: f,
}
// Signal auth was ok on first read; this frees up other workers to start
if authOkFunc != nil {
reader = newStartCallbackReader(reader, func(*startCallbackReader) {
authOkFunc()
})
}
req.Body = ioutil.NopCloser(reader)
res, err = httputil.DoHttpRequest(config.Config, req, false)
if err != nil {
return errors.NewRetriableError(err)
}
httputil.LogTransfer(config.Config, "lfs.data.upload", res)
// A status code of 403 likely means that an authentication token for the
// upload has expired. This can be safely retried.
if res.StatusCode == 403 {
err = errors.New("http: received status 403")
return errors.NewRetriableError(err)
}
if res.StatusCode > 299 {
return errors.Wrapf(nil, "Invalid status for %s: %d", httputil.TraceHttpReq(req), res.StatusCode)
}
io.Copy(ioutil.Discard, res.Body)
res.Body.Close()
return api.VerifyUpload(config.Config, t.Object)
}