Golang SetFilesystem 예제들

예제 #1

파일: edison_adaptor_test.go 프로젝트: aryanugroho/gobot

func TestEdisonAdaptorConnect(t *testing.T) {
	a, _ := initTestEdisonAdaptor()
	gobot.Assert(t, len(a.Connect()), 0)

	a = NewEdisonAdaptor("myAdaptor")
	sysfs.SetFilesystem(sysfs.NewMockFilesystem([]string{}))
	gobot.Refute(t, len(a.Connect()), 0)
}

예제 #2

파일: edison_adaptor_test.go 프로젝트: katgironpe/gobot

func TestEdisonAdaptorFinalize(t *testing.T) {
	a, _ := initTestEdisonAdaptor()
	a.DigitalWrite("3", 1)
	a.PwmWrite("5", 100)
	a.i2cDevice = &NullReadWriteCloser{}
	gobot.Assert(t, len(a.Finalize()), 0)

	closeErr = errors.New("close error")
	sysfs.SetFilesystem(sysfs.NewMockFilesystem([]string{}))
	gobot.Refute(t, len(a.Finalize()), 0)
}

예제 #3

파일: raspi_adaptor_test.go 프로젝트: katgironpe/gobot

func TestRaspiAdaptorFinalize(t *testing.T) {
	a := initTestRaspiAdaptor()
	fs := sysfs.NewMockFilesystem([]string{
		"/sys/class/gpio/export",
		"/sys/class/gpio/unexport",
	})

	sysfs.SetFilesystem(fs)
	a.DigitalWrite("3", 1)
	a.i2cDevice = new(NullReadWriteCloser)
	gobot.Assert(t, len(a.Finalize()), 0)
}

예제 #4

파일: raspi_adaptor_test.go 프로젝트: kissthink/gobot

func TestRaspiAdaptorI2c(t *testing.T) {
	a := initTestRaspiAdaptor()
	fs := sysfs.NewMockFilesystem([]string{
		"/dev/i2c-1",
	})
	sysfs.SetFilesystem(fs)
	sysfs.SetSyscall(&sysfs.MockSyscall{})
	a.I2cStart(0xff)

	a.I2cWrite([]byte{0x00, 0x01})
	data, _ := a.I2cRead(2)
	gobot.Assert(t, data, []byte{0x00, 0x01})
}

예제 #5

파일: edison_adaptor_test.go 프로젝트: aryanugroho/gobot

func TestEdisonAdaptorFinalize(t *testing.T) {
	a, _ := initTestEdisonAdaptor()
	a.DigitalWrite("3", 1)
	a.PwmWrite("5", 100)

	sysfs.SetSyscall(&sysfs.MockSyscall{})
	a.I2cStart(0xff)

	gobot.Assert(t, len(a.Finalize()), 0)

	closeErr = errors.New("close error")
	sysfs.SetFilesystem(sysfs.NewMockFilesystem([]string{}))
	gobot.Refute(t, len(a.Finalize()), 0)
}

예제 #6

파일: chip_adaptor_test.go 프로젝트: ryanhatfield/gobot

func TestChipAdaptorI2c(t *testing.T) {
	a := initTestChipAdaptor()
	fs := sysfs.NewMockFilesystem([]string{
		"/dev/i2c-1",
	})
	sysfs.SetFilesystem(fs)
	sysfs.SetSyscall(&sysfs.MockSyscall{})
	a.I2cStart(0xff)
	a.i2cDevice = &NullReadWriteCloser{}

	a.I2cWrite(0xff, []byte{0x00, 0x01})
	data, _ := a.I2cRead(0xff, 2)
	gobot.Assert(t, data, []byte{0x00, 0x01})

	gobot.Assert(t, len(a.Finalize()), 0)
}

예제 #7

파일: raspi_adaptor_test.go 프로젝트: aryanugroho/gobot

func TestRaspiAdaptorDigitalPWM(t *testing.T) {
	a := initTestRaspiAdaptor()

	gobot.Assert(t, a.PwmWrite("7", 4), nil)

	fs := sysfs.NewMockFilesystem([]string{
		"/dev/pi-blaster",
	})
	sysfs.SetFilesystem(fs)

	gobot.Assert(t, a.PwmWrite("7", 255), nil)

	gobot.Assert(t, strings.Split(fs.Files["/dev/pi-blaster"].Contents, "\n")[0], "4=1")

	gobot.Assert(t, a.ServoWrite("11", 255), nil)

	gobot.Assert(t, strings.Split(fs.Files["/dev/pi-blaster"].Contents, "\n")[0], "17=0.25")
}

예제 #8

파일: raspi_adaptor_test.go 프로젝트: aryanugroho/gobot

func TestRaspiAdaptorFinalize(t *testing.T) {
	a := initTestRaspiAdaptor()

	fs := sysfs.NewMockFilesystem([]string{
		"/sys/class/gpio/export",
		"/sys/class/gpio/unexport",
		"/dev/pi-blaster",
		"/dev/i2c-1",
		"/dev/i2c-0",
	})

	sysfs.SetFilesystem(fs)
	sysfs.SetSyscall(&sysfs.MockSyscall{})

	a.DigitalWrite("3", 1)
	a.PwmWrite("7", 255)

	a.I2cStart(0xff)
	gobot.Assert(t, len(a.Finalize()), 0)
}

예제 #9

파일: raspi_adaptor_test.go 프로젝트: aryanugroho/gobot

func TestRaspiAdaptorDigitalIO(t *testing.T) {
	a := initTestRaspiAdaptor()
	fs := sysfs.NewMockFilesystem([]string{
		"/sys/class/gpio/export",
		"/sys/class/gpio/unexport",
		"/sys/class/gpio/gpio4/value",
		"/sys/class/gpio/gpio4/direction",
		"/sys/class/gpio/gpio27/value",
		"/sys/class/gpio/gpio27/direction",
	})

	sysfs.SetFilesystem(fs)

	a.DigitalWrite("7", 1)
	gobot.Assert(t, fs.Files["/sys/class/gpio/gpio4/value"].Contents, "1")

	a.DigitalWrite("13", 1)
	i, _ := a.DigitalRead("13")
	gobot.Assert(t, i, 1)
}

예제 #10

파일: chip_adaptor_test.go 프로젝트: ryanhatfield/gobot

func TestChipAdaptorDigitalIO(t *testing.T) {
	a := initTestChipAdaptor()
	fs := sysfs.NewMockFilesystem([]string{
		"/sys/class/gpio/export",
		"/sys/class/gpio/unexport",
		"/sys/class/gpio/gpio408/value",
		"/sys/class/gpio/gpio408/direction",
		"/sys/class/gpio/gpio415/value",
		"/sys/class/gpio/gpio415/direction",
	})

	sysfs.SetFilesystem(fs)

	a.DigitalWrite("XIO-P0", 1)
	gobot.Assert(t, fs.Files["/sys/class/gpio/gpio408/value"].Contents, "1")

	fs.Files["/sys/class/gpio/gpio415/value"].Contents = "1"
	i, _ := a.DigitalRead("XIO-P7")
	gobot.Assert(t, i, 1)

	gobot.Assert(t, a.DigitalWrite("XIO-P10", 1), errors.New("Not a valid pin"))
}

예제 #11

파일: beaglebone_adaptor_test.go 프로젝트: ympons/gobot

func TestBeagleboneAdaptor(t *testing.T) {
	glob = func(pattern string) (matches []string, err error) {
		return make([]string, 2), nil
	}
	fs := sysfs.NewMockFilesystem([]string{
		"/dev/i2c-1",
		"/sys/devices/bone_capemgr.4",
		"/sys/devices/ocp.3",
		"/sys/devices/ocp.3/gpio-leds.8/leds/beaglebone:green:usr1/brightness",
		"/sys/devices/ocp.3/helper.5",
		"/sys/devices/ocp.3/helper.5/AIN1",
		"/sys/devices/ocp.3/pwm_test_P9_14.5",
		"/sys/devices/ocp.3/pwm_test_P9_14.5/run",
		"/sys/devices/ocp.3/pwm_test_P9_14.5/period",
		"/sys/devices/ocp.3/pwm_test_P9_14.5/polarity",
		"/sys/devices/ocp.3/pwm_test_P9_14.5/duty",
		"/sys/class/gpio/export",
		"/sys/class/gpio/unexport",
		"/sys/class/gpio/gpio60/value",
		"/sys/class/gpio/gpio60/direction",
		"/sys/class/gpio/gpio10/value",
		"/sys/class/gpio/gpio10/direction",
	})

	sysfs.SetFilesystem(fs)
	a := NewBeagleboneAdaptor("myAdaptor")
	a.slots = "/sys/devices/bone_capemgr.4"
	a.ocp = "/sys/devices/ocp.3"

	a.Connect()

	a.helper = "/sys/devices/ocp.3/helper.5"

	// PWM
	glob = func(pattern string) (matches []string, err error) {
		pattern = strings.TrimSuffix(pattern, "*")
		return []string{pattern + "5"}, nil
	}

	gobottest.Assert(t, a.PwmWrite("P9_99", 175), errors.New("Not a valid pin"))
	a.PwmWrite("P9_14", 175)
	gobottest.Assert(
		t,
		fs.Files["/sys/devices/ocp.3/pwm_test_P9_14.5/period"].Contents,
		"500000",
	)
	gobottest.Assert(
		t,
		fs.Files["/sys/devices/ocp.3/pwm_test_P9_14.5/duty"].Contents,
		"343137",
	)

	a.ServoWrite("P9_14", 100)
	gobottest.Assert(
		t,
		fs.Files["/sys/devices/ocp.3/pwm_test_P9_14.5/period"].Contents,
		"16666666",
	)
	gobottest.Assert(
		t,
		fs.Files["/sys/devices/ocp.3/pwm_test_P9_14.5/duty"].Contents,
		"1898148",
	)

	// Analog
	fs.Files["/sys/devices/ocp.3/helper.5/AIN1"].Contents = "567\n"
	i, _ := a.AnalogRead("P9_40")
	gobottest.Assert(t, i, 567)

	i, err := a.AnalogRead("P9_99")
	gobottest.Assert(t, err, errors.New("Not a valid pin"))

	// DigitalIO
	a.DigitalWrite("usr1", 1)
	gobottest.Assert(t,
		fs.Files["/sys/devices/ocp.3/gpio-leds.8/leds/beaglebone:green:usr1/brightness"].Contents,
		"1",
	)

	a.DigitalWrite("P9_12", 1)
	gobottest.Assert(t, fs.Files["/sys/class/gpio/gpio60/value"].Contents, "1")

	gobottest.Assert(t, a.DigitalWrite("P9_99", 1), errors.New("Not a valid pin"))

	fs.Files["/sys/class/gpio/gpio10/value"].Contents = "1"
	i, _ = a.DigitalRead("P8_31")
	gobottest.Assert(t, i, 1)

	// I2c
	sysfs.SetSyscall(&sysfs.MockSyscall{})
	a.I2cStart(0xff)

	a.i2cDevice = &NullReadWriteCloser{}

	a.I2cWrite(0xff, []byte{0x00, 0x01})
	data, _ := a.I2cRead(0xff, 2)
	gobottest.Assert(t, data, []byte{0x00, 0x01})

	gobottest.Assert(t, len(a.Finalize()), 0)
}

예제 #12

파일: edison_adaptor_test.go 프로젝트: aryanugroho/gobot

func initTestEdisonAdaptor() (*EdisonAdaptor, *sysfs.MockFilesystem) {
	a := NewEdisonAdaptor("myAdaptor")
	fs := sysfs.NewMockFilesystem([]string{
		"/sys/bus/iio/devices/iio:device1/in_voltage0_raw",
		"/sys/kernel/debug/gpio_debug/gpio111/current_pinmux",
		"/sys/kernel/debug/gpio_debug/gpio115/current_pinmux",
		"/sys/kernel/debug/gpio_debug/gpio114/current_pinmux",
		"/sys/kernel/debug/gpio_debug/gpio109/current_pinmux",
		"/sys/kernel/debug/gpio_debug/gpio131/current_pinmux",
		"/sys/kernel/debug/gpio_debug/gpio129/current_pinmux",
		"/sys/kernel/debug/gpio_debug/gpio40/current_pinmux",
		"/sys/kernel/debug/gpio_debug/gpio13/current_pinmux",
		"/sys/kernel/debug/gpio_debug/gpio28/current_pinmux",
		"/sys/kernel/debug/gpio_debug/gpio27/current_pinmux",
		"/sys/class/pwm/pwmchip0/export",
		"/sys/class/pwm/pwmchip0/unexport",
		"/sys/class/pwm/pwmchip0/pwm1/duty_cycle",
		"/sys/class/pwm/pwmchip0/pwm1/period",
		"/sys/class/pwm/pwmchip0/pwm1/enable",
		"/sys/class/gpio/export",
		"/sys/class/gpio/unexport",
		"/sys/class/gpio/gpio13/value",
		"/sys/class/gpio/gpio13/direction",
		"/sys/class/gpio/gpio40/value",
		"/sys/class/gpio/gpio40/direction",
		"/sys/class/gpio/gpio128/value",
		"/sys/class/gpio/gpio128/direction",
		"/sys/class/gpio/gpio221/value",
		"/sys/class/gpio/gpio221/direction",
		"/sys/class/gpio/gpio243/value",
		"/sys/class/gpio/gpio243/direction",
		"/sys/class/gpio/gpio229/direction",
		"/sys/class/gpio/gpio253/value",
		"/sys/class/gpio/gpio253/direction",
		"/sys/class/gpio/gpio261/value",
		"/sys/class/gpio/gpio261/direction",
		"/sys/class/gpio/gpio214/value",
		"/sys/class/gpio/gpio214/direction",
		"/sys/class/gpio/gpio14/direction",
		"/sys/class/gpio/gpio14/value",
		"/sys/class/gpio/gpio165/direction",
		"/sys/class/gpio/gpio165/value",
		"/sys/class/gpio/gpio212/direction",
		"/sys/class/gpio/gpio212/value",
		"/sys/class/gpio/gpio213/direction",
		"/sys/class/gpio/gpio213/value",
		"/sys/class/gpio/gpio236/direction",
		"/sys/class/gpio/gpio236/value",
		"/sys/class/gpio/gpio237/direction",
		"/sys/class/gpio/gpio237/value",
		"/sys/class/gpio/gpio204/direction",
		"/sys/class/gpio/gpio204/value",
		"/sys/class/gpio/gpio205/direction",
		"/sys/class/gpio/gpio205/value",
		"/sys/class/gpio/gpio263/direction",
		"/sys/class/gpio/gpio263/value",
		"/sys/class/gpio/gpio262/direction",
		"/sys/class/gpio/gpio262/value",
		"/sys/class/gpio/gpio240/direction",
		"/sys/class/gpio/gpio240/value",
		"/sys/class/gpio/gpio241/direction",
		"/sys/class/gpio/gpio241/value",
		"/sys/class/gpio/gpio242/direction",
		"/sys/class/gpio/gpio242/value",
		"/sys/class/gpio/gpio218/direction",
		"/sys/class/gpio/gpio218/value",
		"/sys/class/gpio/gpio250/direction",
		"/sys/class/gpio/gpio250/value",
		"/dev/i2c-6",
	})
	sysfs.SetFilesystem(fs)
	fs.Files["/sys/class/pwm/pwmchip0/pwm1/period"].Contents = "5000\n"
	a.Connect()
	return a, fs
}