예제 #1
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestSingleExecutorClose(t *testing.T) {
	task1 := &fakeTask{runDuration: time.Hour}
	se := tasks.NewSingleExecutor()
	e := se.Start(task1)
	se.Close()
	<-e.Done()
}
예제 #2
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestSingleExecutorStart(t *testing.T) {
	task1 := &fakeTask{runDuration: time.Millisecond}
	task2 := &fakeTask{runDuration: time.Millisecond}
	task3 := &fakeTask{runDuration: time.Millisecond}
	se := tasks.NewSingleExecutor()
	defer se.Close()
	e := se.Start(task1)
	if tk, ex := se.Current(); tk.(*fakeTask) != task1 || ex != e {
		t.Error("Expect Current to be task 1.")
	}
	<-e.Done()
	e = se.Start(task2)
	if tk, ex := se.Current(); tk.(*fakeTask) != task2 || ex != e {
		t.Error("Expect Current to be task 2.")
	}
	<-e.Done()
	e = se.Start(task3)
	if tk, ex := se.Current(); tk.(*fakeTask) != task3 || ex != e {
		t.Error("Expect Current to be task 3.")
	}
	<-e.Done()
	if tk, ex := se.Current(); tk != nil || ex != nil {
		t.Error("Expected current task and execution to be nil.")
	}
	if !task1.hasRun() || !task2.hasRun() || !task3.hasRun() {
		t.Error("All three tasks should have run.")
	}
}
예제 #3
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestSingleExecutorPause(t *testing.T) {
	starting := make(chan bool, 100)
	defer close(starting)
	task1 := &fakeTask2{runDuration: time.Hour, Starting: starting}
	se := tasks.NewSingleExecutor()
	defer se.Close()
	se.Start(task1)
	waitForStarts(starting, 1)
	se.Pause()
}
예제 #4
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestPauseNotSupportedPauseEarly(t *testing.T) {
	starting := make(chan bool, 100)
	defer close(starting)
	task1 := &pauseTask{Starting: starting}
	se := tasks.NewSingleExecutor()
	defer se.Close()
	se.Start(task1)
	se.Pause()

	// Acknowledge if the task completed while pausing
	waitForStarts(starting, task1.Count())
	time.Sleep(time.Millisecond)

	// No new tasks should start
	assertNoStarting(t, starting)
}
예제 #5
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestSingleExecutorForceStart(t *testing.T) {
	task1 := &fakeTask{runDuration: time.Hour}
	task2 := &fakeTask{runDuration: time.Hour}
	task3 := &fakeTask{runDuration: time.Hour}
	se := tasks.NewSingleExecutor()
	defer se.Close()
	e1 := se.Start(task1)
	e2 := se.Start(task2)
	e3 := se.Start(task3)
	e3.End()
	<-e1.Done()
	<-e2.Done()
	<-e3.Done()
	if !task1.hasRun() || !task2.hasRun() || !task3.hasRun() {
		t.Error("All three tasks should have run.")
	}
}
예제 #6
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestPauseSeriesItself(t *testing.T) {
	starting := make(chan bool, 100)
	defer close(starting)
	task := &pauseTask{Starting: starting}
	se := tasks.NewSingleExecutor()
	defer se.Close()
	// Tasks in executor must support equality
	e := se.Start(&taskStruct{tasks.SeriesTasks(task, task)})
	waitForStarts(starting, 1)
	se.Pause()
	select {
	case <-e.Done():
		t.Error("Pause not working")
	case <-time.After(10 * time.Millisecond):
	}
	e.End()
	<-e.Done()
}
예제 #7
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestPauseNotSupported(t *testing.T) {
	starting := make(chan bool, 100)
	defer close(starting)
	task1 := &pauseTask{Starting: starting}
	se := tasks.NewSingleExecutor()
	defer se.Close()
	e := se.Start(task1)
	waitForStarts(starting, 1)

	// Since this task doesn't support pause, this Pause() call won't return
	// until the task is finished.
	se.Pause()
	if out := task1.Count(); out != 1 {
		t.Errorf("Expected 1, got %d", out)
	}
	// A paused task can still end on its own. The only
	// guarantee is that the paused task won't do any additional work.
	<-e.Done()
}
예제 #8
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestPauseNotSupportedParallelPauseEarly(t *testing.T) {
	starting := make(chan bool, 100)
	defer close(starting)
	task1 := &pauseTask{Starting: starting}
	ts := make([]tasks.Task, 20)
	for i := range ts {
		ts[i] = task1
	}
	se := tasks.NewSingleExecutor()
	defer se.Close()
	se.Start(&taskStruct{tasks.ParallelTasks(ts...)})
	se.Pause()

	// Acknowledge the tasks that completed while pausing
	waitForStarts(starting, task1.Count())
	time.Sleep(time.Millisecond)

	// No new tasks should start
	assertNoStarting(t, starting)
}
예제 #9
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestSingleExecutorPauseFromBeginning(t *testing.T) {
	starting := make(chan bool, 100)
	defer close(starting)
	task := &pauseTask{Starting: starting}
	se := tasks.NewSingleExecutor()
	defer se.Close()
	se.Pause()
	e := se.Start(&taskStruct{tasks.RepeatingTask(task, 2147483647)})
	time.Sleep(5 * time.Millisecond)
	assertNoStarting(t, starting)
	se.Resume()
	waitForStarts(starting, 1)
	se.Pause()
	expected := 1
	if out := task.Count(); out != expected {
		t.Errorf("Expected count of %d, got %d", expected, out)
		expected = out
	}
	e.End()
	<-e.Done()
}
예제 #10
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestPauseNotSupportedParallel(t *testing.T) {
	starting := make(chan bool, 100)
	defer close(starting)
	task1 := &pauseTask{Starting: starting}
	ts := make([]tasks.Task, 20)
	for i := range ts {
		ts[i] = task1
	}
	se := tasks.NewSingleExecutor()
	defer se.Close()
	e := se.Start(&taskStruct{tasks.ParallelTasks(ts...)})
	waitForStarts(starting, len(ts))

	// Since these parallel tasks don't support pause, this Pause() call
	// won't return until all the tasks have finished.
	se.Pause()
	if out := task1.Count(); out != len(ts) {
		t.Errorf("Expected %d, got %d", len(ts), out)
	}
	// A paused task can still end on its own. The only
	// guarantee is that the paused task won't do any additional work.
	<-e.Done()
}
예제 #11
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestSingleExecutorMultiThread(t *testing.T) {
	fakeTasks := make([]*fakeTask, 20)
	for i := range fakeTasks {
		fakeTasks[i] = &fakeTask{}
	}
	var wg sync.WaitGroup
	wg.Add(len(fakeTasks))
	se := tasks.NewSingleExecutor()
	defer se.Close()
	for i := range fakeTasks {
		go func(t tasks.Task) {
			e := se.Start(t)
			<-e.Done()
			wg.Done()
		}(fakeTasks[i])
	}
	wg.Wait()
	for i := range fakeTasks {
		if fakeTasks[i].timesRun != 1 {
			t.Error("Expected each task to be run exactly once.")
		}
	}
}
예제 #12
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestPauseSeries(t *testing.T) {
	starting := make(chan bool, 100)
	defer close(starting)
	task := &pauseTask{Starting: starting}
	se := tasks.NewSingleExecutor()
	defer se.Close()
	ts := make([]tasks.Task, 20)
	for i := range ts {
		ts[i] = tasks.RepeatingTask(task, 2147483647)
	}
	// Tasks in executor must support equality
	e := se.Start(&taskStruct{tasks.SeriesTasks(ts...)})
	waitForStarts(starting, 1)
	se.Pause()
	expected := 1
	if out := task.Count(); out != expected {
		t.Errorf("Expected count of %d, got %d", expected, out)
		expected = out
	}
	time.Sleep(5 * time.Millisecond)
	assertNoStarting(t, starting)
	se.Resume()
	se.Resume()
	waitForStarts(starting, 1)
	se.Pause()
	expected += 1
	if out := task.Count(); out != expected {
		t.Errorf("Expected count of %d, got %d", expected, out)
		expected = out
	}
	time.Sleep(5 * time.Millisecond)
	assertNoStarting(t, starting)
	se.Resume()
	e.End()
	<-e.Done()
}
예제 #13
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestInterruptWhilePaused(t *testing.T) {
	starting := make(chan bool, 100)
	defer close(starting)
	task1 := &fakeTask2{runDuration: time.Hour, Starting: starting}
	task2 := &fakeTask2{runDuration: time.Hour, Starting: starting}
	task3 := &fakeTask2{runDuration: time.Hour, Starting: starting}
	se := tasks.NewSingleExecutor()
	e1 := se.Start(task1)
	waitForStarts(starting, 1)
	se.Pause()
	ctask, _ := se.Current()
	if ctask != task1 {
		t.Error("Expect current task to be task1")
	}
	expectFalse(t, "e1.IsDone()", e1.IsDone())
	e2 := se.Start(task2)
	expectTrue(t, "e1.IsDone()", e1.IsDone())
	ctask, _ = se.Current()
	if ctask != task2 {
		t.Error("Expect current task to be task2")
	}
	time.Sleep(time.Millisecond)
	assertNoStarting(t, starting)
	expectFalse(t, "e2.IsDone()", e2.IsDone())
	e3 := se.Start(task3)
	expectTrue(t, "e2.IsDone()", e2.IsDone())
	ctask, _ = se.Current()
	if ctask != task3 {
		t.Error("Expect current task to be task3")
	}
	time.Sleep(time.Millisecond)
	assertNoStarting(t, starting)
	expectFalse(t, "e3.IsDone()", e3.IsDone())
	se.Close()
	expectTrue(t, "e3.IsDone()", e3.IsDone())
}
예제 #14
0
파일: tasks_test.go 프로젝트: keep94/tasks
func TestPauseNoTasks(t *testing.T) {
	se := tasks.NewSingleExecutor()
	defer se.Close()
	se.Pause()
	se.Resume()
}