예제 #1
0
파일: quartile.go 프로젝트: skiesel/plot
// Plot draws the QuartPlot on Canvas c and Plot plt.
func (b *QuartPlot) Plot(c draw.Canvas, plt *plot.Plot) {
	if b.Horizontal {
		b := &horizQuartPlot{b}
		b.Plot(c, plt)
		return
	}

	trX, trY := plt.Transforms(&c)
	x := trX(b.Location)
	if !c.ContainsX(x) {
		return
	}
	x += b.Offset

	med := draw.Point{X: x, Y: trY(b.Median)}
	q1 := trY(b.Quartile1)
	q3 := trY(b.Quartile3)
	aLow := trY(b.AdjLow)
	aHigh := trY(b.AdjHigh)

	c.StrokeLine2(b.WhiskerStyle, x, aHigh, x, q3)
	if c.ContainsY(med.Y) {
		c.DrawGlyphNoClip(b.MedianStyle, med)
	}
	c.StrokeLine2(b.WhiskerStyle, x, aLow, x, q1)

	ostyle := b.MedianStyle
	ostyle.Radius = b.MedianStyle.Radius / 2
	for _, out := range b.Outside {
		y := trY(b.Value(out))
		if c.ContainsY(y) {
			c.DrawGlyphNoClip(ostyle, draw.Point{X: x, Y: y})
		}
	}
}
예제 #2
0
파일: quartile.go 프로젝트: skiesel/plot
func (b horizQuartPlot) Plot(c draw.Canvas, plt *plot.Plot) {
	trX, trY := plt.Transforms(&c)
	y := trY(b.Location)
	if !c.ContainsY(y) {
		return
	}
	y += b.Offset

	med := draw.Point{X: trX(b.Median), Y: y}
	q1 := trX(b.Quartile1)
	q3 := trX(b.Quartile3)
	aLow := trX(b.AdjLow)
	aHigh := trX(b.AdjHigh)

	c.StrokeLine2(b.WhiskerStyle, aHigh, y, q3, y)
	if c.ContainsX(med.X) {
		c.DrawGlyphNoClip(b.MedianStyle, med)
	}
	c.StrokeLine2(b.WhiskerStyle, aLow, y, q1, y)

	ostyle := b.MedianStyle
	ostyle.Radius = b.MedianStyle.Radius / 2
	for _, out := range b.Outside {
		x := trX(b.Value(out))
		if c.ContainsX(x) {
			c.DrawGlyphNoClip(ostyle, draw.Point{X: x, Y: y})
		}
	}
}
예제 #3
0
파일: barchart.go 프로젝트: skiesel/plot
// Plot implements the plot.Plotter interface.
func (b *BarChart) Plot(c draw.Canvas, plt *plot.Plot) {
	trCat, trVal := plt.Transforms(&c)
	if b.Horizontal {
		trCat, trVal = trVal, trCat
	}

	for i, ht := range b.Values {
		catVal := b.XMin + float64(i)
		catMin := trCat(float64(catVal))
		if !b.Horizontal {
			if !c.ContainsX(catMin) {
				continue
			}
		} else {
			if !c.ContainsY(catMin) {
				continue
			}
		}
		catMin = catMin - b.Width/2 + b.Offset
		catMax := catMin + b.Width
		bottom := b.stackedOn.BarHeight(i)
		valMin := trVal(bottom)
		valMax := trVal(bottom + ht)

		var pts []draw.Point
		var poly []draw.Point
		if !b.Horizontal {
			pts = []draw.Point{
				{catMin, valMin},
				{catMin, valMax},
				{catMax, valMax},
				{catMax, valMin},
			}
			poly = c.ClipPolygonY(pts)
		} else {
			pts = []draw.Point{
				{valMin, catMin},
				{valMin, catMax},
				{valMax, catMax},
				{valMax, catMin},
			}
			poly = c.ClipPolygonX(pts)
		}
		c.FillPolygon(b.Color, poly)

		var outline [][]draw.Point
		if !b.Horizontal {
			pts = append(pts, draw.Point{X: catMin, Y: valMin})
			outline = c.ClipLinesY(pts)
		} else {
			pts = append(pts, draw.Point{X: valMin, Y: catMin})
			outline = c.ClipLinesX(pts)
		}
		c.StrokeLines(b.LineStyle, outline...)
	}
}
예제 #4
0
파일: boxplot.go 프로젝트: skiesel/plot
// Plot draws the BoxPlot on Canvas c and Plot plt.
func (b *BoxPlot) Plot(c draw.Canvas, plt *plot.Plot) {
	if b.Horizontal {
		b := &horizBoxPlot{b}
		b.Plot(c, plt)
		return
	}

	trX, trY := plt.Transforms(&c)
	x := trX(b.Location)
	if !c.ContainsX(x) {
		return
	}
	x += b.Offset

	med := trY(b.Median)
	q1 := trY(b.Quartile1)
	q3 := trY(b.Quartile3)
	aLow := trY(b.AdjLow)
	aHigh := trY(b.AdjHigh)

	box := c.ClipLinesY([]draw.Point{
		{x - b.Width/2, q1},
		{x - b.Width/2, q3},
		{x + b.Width/2, q3},
		{x + b.Width/2, q1},
		{x - b.Width/2 - b.BoxStyle.Width/2, q1},
	})
	c.StrokeLines(b.BoxStyle, box...)

	medLine := c.ClipLinesY([]draw.Point{
		{x - b.Width/2, med},
		{x + b.Width/2, med},
	})
	c.StrokeLines(b.MedianStyle, medLine...)

	cap := b.CapWidth / 2
	whisks := c.ClipLinesY([]draw.Point{{x, q3}, {x, aHigh}},
		[]draw.Point{{x - cap, aHigh}, {x + cap, aHigh}},
		[]draw.Point{{x, q1}, {x, aLow}},
		[]draw.Point{{x - cap, aLow}, {x + cap, aLow}})
	c.StrokeLines(b.WhiskerStyle, whisks...)

	for _, out := range b.Outside {
		y := trY(b.Value(out))
		if c.ContainsY(y) {
			c.DrawGlyphNoClip(b.GlyphStyle, draw.Point{X: x, Y: y})
		}
	}
}
예제 #5
0
파일: boxplot.go 프로젝트: skiesel/plot
func (b horizBoxPlot) Plot(c draw.Canvas, plt *plot.Plot) {
	trX, trY := plt.Transforms(&c)
	y := trY(b.Location)
	if !c.ContainsY(y) {
		return
	}
	y += b.Offset

	med := trX(b.Median)
	q1 := trX(b.Quartile1)
	q3 := trX(b.Quartile3)
	aLow := trX(b.AdjLow)
	aHigh := trX(b.AdjHigh)

	box := c.ClipLinesX([]draw.Point{
		{q1, y - b.Width/2},
		{q3, y - b.Width/2},
		{q3, y + b.Width/2},
		{q1, y + b.Width/2},
		{q1, y - b.Width/2 - b.BoxStyle.Width/2},
	})
	c.StrokeLines(b.BoxStyle, box...)

	medLine := c.ClipLinesX([]draw.Point{
		{med, y - b.Width/2},
		{med, y + b.Width/2},
	})
	c.StrokeLines(b.MedianStyle, medLine...)

	cap := b.CapWidth / 2
	whisks := c.ClipLinesX([]draw.Point{{q3, y}, {aHigh, y}},
		[]draw.Point{{aHigh, y - cap}, {aHigh, y + cap}},
		[]draw.Point{{q1, y}, {aLow, y}},
		[]draw.Point{{aLow, y - cap}, {aLow, y + cap}})
	c.StrokeLines(b.WhiskerStyle, whisks...)

	for _, out := range b.Outside {
		x := trX(b.Value(out))
		if c.ContainsX(x) {
			c.DrawGlyphNoClip(b.GlyphStyle, draw.Point{X: x, Y: y})
		}
	}
}
예제 #6
0
파일: axis.go 프로젝트: skiesel/plot
// draw draws the axis along the left side of a draw.Canvas.
func (a *verticalAxis) draw(c draw.Canvas) {
	x := c.Min.X
	if a.Label.Text != "" {
		x += a.Label.Height(a.Label.Text)
		c.Push()
		c.Rotate(math.Pi / 2)
		c.FillText(a.Label.TextStyle, c.Center().Y, -x, -0.5, 0, a.Label.Text)
		c.Pop()
		x += -a.Label.Font.Extents().Descent
	}
	marks := a.Tick.Marker.Ticks(a.Min, a.Max)
	if w := tickLabelWidth(a.Tick.Label, marks); len(marks) > 0 && w > 0 {
		x += w
	}
	major := false
	for _, t := range marks {
		y := c.Y(a.Norm(t.Value))
		if !c.ContainsY(y) || t.IsMinor() {
			continue
		}
		c.FillText(a.Tick.Label, x, y, -1, -0.5, t.Label)
		major = true
	}
	if major {
		x += a.Tick.Label.Width(" ")
	}
	if a.drawTicks() && len(marks) > 0 {
		len := a.Tick.Length
		for _, t := range marks {
			y := c.Y(a.Norm(t.Value))
			if !c.ContainsY(y) {
				continue
			}
			start := t.lengthOffset(len)
			c.StrokeLine2(a.Tick.LineStyle, x+start, y, x+len, y)
		}
		x += len
	}
	c.StrokeLine2(a.LineStyle, x, c.Min.Y, x, c.Max.Y)
}