예제 #1
0
func LoadState(db dbm.DB) *State {
	s := &State{DB: db}
	buf := db.Get(stateKey)
	if len(buf) == 0 {
		return nil
	} else {
		r, n, err := bytes.NewReader(buf), new(int64), new(error)
		s.ChainID = wire.ReadString(r, n, err)
		s.LastBlockHeight = wire.ReadVarint(r, n, err)
		s.LastBlockHash = wire.ReadByteSlice(r, n, err)
		s.LastBlockParts = wire.ReadBinary(types.PartSetHeader{}, r, n, err).(types.PartSetHeader)
		s.LastBlockTime = wire.ReadTime(r, n, err)
		s.BondedValidators = wire.ReadBinary(&types.ValidatorSet{}, r, n, err).(*types.ValidatorSet)
		s.LastBondedValidators = wire.ReadBinary(&types.ValidatorSet{}, r, n, err).(*types.ValidatorSet)
		s.UnbondingValidators = wire.ReadBinary(&types.ValidatorSet{}, r, n, err).(*types.ValidatorSet)
		accountsHash := wire.ReadByteSlice(r, n, err)
		s.accounts = merkle.NewIAVLTree(wire.BasicCodec, acm.AccountCodec, defaultAccountsCacheCapacity, db)
		s.accounts.Load(accountsHash)
		validatorInfosHash := wire.ReadByteSlice(r, n, err)
		s.validatorInfos = merkle.NewIAVLTree(wire.BasicCodec, types.ValidatorInfoCodec, 0, db)
		s.validatorInfos.Load(validatorInfosHash)
		nameRegHash := wire.ReadByteSlice(r, n, err)
		s.nameReg = merkle.NewIAVLTree(wire.BasicCodec, NameRegCodec, 0, db)
		s.nameReg.Load(nameRegHash)
		if *err != nil {
			// DATA HAS BEEN CORRUPTED OR THE SPEC HAS CHANGED
			Exit(Fmt("Data has been corrupted or its spec has changed: %v\n", *err))
		}
		// TODO: ensure that buf is completely read.
	}
	return s
}
예제 #2
0
func testProof(t *testing.T, proof *IAVLProof, keyBytes, valueBytes, rootHash []byte) {
	// Proof must verify.
	if !proof.Verify(keyBytes, valueBytes, rootHash) {
		t.Errorf("Invalid proof. Verification failed.")
		return
	}
	// Write/Read then verify.
	proofBytes := wire.BinaryBytes(proof)
	n, err := int64(0), error(nil)
	proof2 := wire.ReadBinary(&IAVLProof{}, bytes.NewBuffer(proofBytes), &n, &err).(*IAVLProof)
	if err != nil {
		t.Errorf("Failed to read IAVLProof from bytes: %v", err)
		return
	}
	if !proof2.Verify(keyBytes, valueBytes, rootHash) {
		// t.Log(Fmt("%X\n%X\n", proofBytes, wire.BinaryBytes(proof2)))
		t.Errorf("Invalid proof after write/read. Verification failed.")
		return
	}
	// Random mutations must not verify
	for i := 0; i < 5; i++ {
		badProofBytes := MutateByteSlice(proofBytes)
		n, err := int64(0), error(nil)
		badProof := wire.ReadBinary(&IAVLProof{}, bytes.NewBuffer(badProofBytes), &n, &err).(*IAVLProof)
		if err != nil {
			continue // This is fine.
		}
		if badProof.Verify(keyBytes, valueBytes, rootHash) {
			t.Errorf("Proof was still valid after a random mutation:\n%X\n%X", proofBytes, badProofBytes)
		}
	}
}
예제 #3
0
func DecodeMessage(bz []byte) (msgType byte, msg PexMessage, err error) {
	msgType = bz[0]
	n := new(int64)
	r := bytes.NewReader(bz)
	msg = wire.ReadBinary(struct{ PexMessage }{}, r, n, &err).(struct{ PexMessage }).PexMessage
	return
}
예제 #4
0
func TestBinaryDecode(t *testing.T) {

	privAccount := GenPrivAccount()
	pubKey := privAccount.PubKey
	privKey := privAccount.PrivKey

	msg := CRandBytes(128)
	sig := privKey.Sign(msg)
	t.Logf("msg: %X, sig: %X", msg, sig)

	buf, n, err := new(bytes.Buffer), new(int64), new(error)
	wire.WriteBinary(sig, buf, n, err)
	if *err != nil {
		t.Fatalf("Failed to write Signature: %v", err)
	}

	if len(buf.Bytes()) != ed25519.SignatureSize+1 {
		// 1 byte TypeByte, 64 bytes signature bytes
		t.Fatalf("Unexpected signature write size: %v", len(buf.Bytes()))
	}
	if buf.Bytes()[0] != SignatureTypeEd25519 {
		t.Fatalf("Unexpected signature type byte")
	}

	sig2, ok := wire.ReadBinary(SignatureEd25519{}, buf, n, err).(SignatureEd25519)
	if !ok || *err != nil {
		t.Fatalf("Failed to read Signature: %v", err)
	}

	// Test the signature
	if !pubKey.VerifyBytes(msg, sig2) {
		t.Errorf("Account message signature verification failed")
	}
}
예제 #5
0
func receiveNameTx(w http.ResponseWriter, r *http.Request) *toadError {
	if r.Method == "POST" {
		//TODO check valid Name reg
		_, err := parseURL(fmt.Sprintf("%s", r.URL))
		if err != nil {
			return &toadError{err, "error parsing URL", 400}
		}
		//hash := params["hash"]

		txData, err := ioutil.ReadAll(r.Body)
		if err != nil {
			return &toadError{err, "error reading body", 400}
		}

		tx := new(types.NameTx)
		n := new(int64)
		txD := bytes.NewReader(txData)

		wire.ReadBinary(tx, txD, n, &err)
		if err != nil {
			return &toadError{err, "error reading binary", 400}
		}

		rpcAddr := os.Getenv("MINTX_NODE_ADDR")
		_, err1 := core.Broadcast(tx, rpcAddr)
		if err1 != nil {
			return &toadError{err, "error broadcasting", 400}
		}
	}
	return nil
}
예제 #6
0
// NOTE: block is not necessarily valid.
// This can trigger us to go into EnterPrevote asynchronously (before we timeout of propose) or to attempt to commit
func (cs *ConsensusState) AddProposalBlockPart(height int, part *types.Part) (added bool, err error) {
	cs.mtx.Lock()
	defer cs.mtx.Unlock()

	// Blocks might be reused, so round mismatch is OK
	if cs.Height != height {
		return false, nil
	}

	// We're not expecting a block part.
	if cs.ProposalBlockParts == nil {
		return false, nil // TODO: bad peer? Return error?
	}

	added, err = cs.ProposalBlockParts.AddPart(part)
	if err != nil {
		return added, err
	}
	if added && cs.ProposalBlockParts.IsComplete() {
		// Added and completed!
		var n int64
		var err error
		cs.ProposalBlock = wire.ReadBinary(&types.Block{}, cs.ProposalBlockParts.GetReader(), &n, &err).(*types.Block)
		log.Info("Received complete proposal", "hash", cs.ProposalBlock.Hash())
		if cs.Step == RoundStepPropose && cs.isProposalComplete() {
			// Move onto the next step
			go cs.EnterPrevote(height, cs.Round, false)
		} else if cs.Step == RoundStepCommit {
			// If we're waiting on the proposal block...
			cs.tryFinalizeCommit(height)
		}
		return true, err
	}
	return added, nil
}
예제 #7
0
func shareAuthSignature(sc *SecretConnection, pubKey acm.PubKeyEd25519, signature acm.SignatureEd25519) (*authSigMessage, error) {
	var recvMsg authSigMessage
	var err1, err2 error

	Parallel(
		func() {
			msgBytes := wire.BinaryBytes(authSigMessage{pubKey, signature})
			_, err1 = sc.Write(msgBytes)
		},
		func() {
			readBuffer := make([]byte, authSigMsgSize)
			_, err2 = io.ReadFull(sc, readBuffer)
			if err2 != nil {
				return
			}
			n := int64(0) // not used.
			recvMsg = wire.ReadBinary(authSigMessage{}, bytes.NewBuffer(readBuffer), &n, &err2).(authSigMessage)
		})

	if err1 != nil {
		return nil, err1
	}
	if err2 != nil {
		return nil, err2
	}

	return &recvMsg, nil
}
예제 #8
0
// TODO: ensure that bz is completely read.
func DecodeMessage(bz []byte) (msgType byte, msg BlockchainMessage, err error) {
	msgType = bz[0]
	n := int64(0)
	r := bytes.NewReader(bz)
	msg = wire.ReadBinary(struct{ BlockchainMessage }{}, r, &n, &err).(struct{ BlockchainMessage }).BlockchainMessage
	if err != nil && n != int64(len(bz)) {
		err = errors.New("DecodeMessage() had bytes left over.")
	}
	return
}
예제 #9
0
// NOTE: the Precommit-vote heights are for the block at `height`
func (bs *BlockStore) LoadSeenValidation(height int) *types.Validation {
	var n int64
	var err error
	r := bs.GetReader(calcSeenValidationKey(height))
	if r == nil {
		return nil
	}
	validation := wire.ReadBinary(&types.Validation{}, r, &n, &err).(*types.Validation)
	if err != nil {
		PanicCrisis(Fmt("Error reading validation: %v", err))
	}
	return validation
}
예제 #10
0
func (bs *BlockStore) LoadBlockMeta(height int) *types.BlockMeta {
	var n int64
	var err error
	r := bs.GetReader(calcBlockMetaKey(height))
	if r == nil {
		return nil
	}
	meta := wire.ReadBinary(&types.BlockMeta{}, r, &n, &err).(*types.BlockMeta)
	if err != nil {
		PanicCrisis(Fmt("Error reading block meta: %v", err))
	}
	return meta
}
예제 #11
0
func (bs *BlockStore) LoadBlockPart(height int, index int) *types.Part {
	var n int64
	var err error
	r := bs.GetReader(calcBlockPartKey(height, index))
	if r == nil {
		return nil
	}
	part := wire.ReadBinary(&types.Part{}, r, &n, &err).(*types.Part)
	if err != nil {
		PanicCrisis(Fmt("Error reading block part: %v", err))
	}
	return part
}
예제 #12
0
func (bs *BlockStore) LoadBlock(height int) *types.Block {
	var n int64
	var err error
	r := bs.GetReader(calcBlockMetaKey(height))
	if r == nil {
		return nil
	}
	meta := wire.ReadBinary(&types.BlockMeta{}, r, &n, &err).(*types.BlockMeta)
	if err != nil {
		PanicCrisis(Fmt("Error reading block meta: %v", err))
	}
	bytez := []byte{}
	for i := 0; i < meta.PartsHeader.Total; i++ {
		part := bs.LoadBlockPart(height, i)
		bytez = append(bytez, part.Bytes...)
	}
	block := wire.ReadBinary(&types.Block{}, bytes.NewReader(bytez), &n, &err).(*types.Block)
	if err != nil {
		PanicCrisis(Fmt("Error reading block: %v", err))
	}
	return block
}
예제 #13
0
파일: peer.go 프로젝트: jsp282/tendermint
// NOTE: blocking
// Before creating a peer with newPeer(), perform a handshake on connection.
func peerHandshake(conn net.Conn, ourNodeInfo *types.NodeInfo) (*types.NodeInfo, error) {
	var peerNodeInfo = new(types.NodeInfo)
	var err1 error
	var err2 error
	Parallel(
		func() {
			var n int64
			wire.WriteBinary(ourNodeInfo, conn, &n, &err1)
		},
		func() {
			var n int64
			wire.ReadBinary(peerNodeInfo, conn, &n, &err2)
			log.Notice("Peer handshake", "peerNodeInfo", peerNodeInfo)
		})
	if err1 != nil {
		return nil, err1
	}
	if err2 != nil {
		return nil, err2
	}
	return peerNodeInfo, nil
}
예제 #14
0
func AccountDecoder(r io.Reader, n *int64, err *error) interface{} {
	return wire.ReadBinary(&Account{}, r, n, err)
}
예제 #15
0
func ValidatorInfoDecoder(r io.Reader, n *int64, err *error) interface{} {
	return wire.ReadBinary(&ValidatorInfo{}, r, n, err)
}
예제 #16
0
func (vc validatorCodec) Decode(r io.Reader, n *int64, err *error) interface{} {
	return wire.ReadBinary(&Validator{}, r, n, err)
}
예제 #17
0
func NameRegDecoder(r io.Reader, n *int64, err *error) interface{} {
	return wire.ReadBinary(&types.NameRegEntry{}, r, n, err)
}