예제 #1
0
파일: syntax.go 프로젝트: ebb/lumgua
func read(buf io.ByteScanner) Literal {
	skipws(buf)
	b, err := buf.ReadByte()
	if err == io.EOF {
		panic("read: premature end of file")
	}
	if err != nil {
		panic("read: input error: " + err.Error())
	}
	switch b {
	case ')':
		panic("read: unmatched close-parenthesis")
	case '"':
		return readString(buf)
	case '\'':
		return readQuote(buf)
	case '`':
		return readQuasi(buf)
	case ',':
		return readComma(buf)
	case '&':
		return readAmpersand(buf)
	case '(':
		return readList(buf)
	}
	buf.UnreadByte()
	return readAtom(buf)
}
예제 #2
0
파일: terminal.go 프로젝트: evmar/smash
func (t *Terminal) Read(r io.ByteScanner) error {
	c, err := r.ReadByte()
	if err != nil {
		return err
	}
	switch {
	case c == 0x7: // bell
		// ignore
	case c == 0x8: // backspace
		if t.Col > 0 {
			t.Col--
		}
	case c == 0x1b:
		return t.readEscape(r)
	case c == '\r':
		t.Col = 0
	case c == '\n':
		t.Col = 0
		t.Row++
		t.fixPosition()
	case c == '\t':
		t.Col += 8 - (t.Col % 8)
		t.fixPosition()
	case c >= ' ' && c <= '~':
		t.writeRune(rune(c), t.Attr)
	default:
		r.UnreadByte()
		return t.readUTF8(r)
	}
	return nil
}
예제 #3
0
파일: syntax.go 프로젝트: ebb/lumgua
func readAtom(buf io.ByteScanner) Literal {
	atomBuf := []byte{}
loop:
	for {
		b, err := buf.ReadByte()
		if err != nil {
			break
		}
		switch b {
		case '(', ')', '\'', '"', ' ', '\t', '\n':
			buf.UnreadByte()
			break loop
		}
		atomBuf = append(atomBuf, b)
	}
	if len(atomBuf) == 0 {
		panic("read: empty atom")
	}
	atom := string(atomBuf)
	n, err := strconv.ParseFloat(atom, 64)
	if err == nil {
		return Number(n)
	}
	return Intern(atom)
}
예제 #4
0
파일: decoder.go 프로젝트: mrd0ll4r/chihaya
func readTerminator(r io.ByteScanner, term byte) (bool, error) {
	tok, err := r.ReadByte()
	if err != nil {
		return false, err
	} else if tok == term {
		return true, nil
	}
	return false, r.UnreadByte()
}
예제 #5
0
파일: syntax.go 프로젝트: ebb/lumgua
func readComma(buf io.ByteScanner) Literal {
	b, err := buf.ReadByte()
	if err != nil {
		panic("read: incomplete comma")
	}
	tag := Intern("unquote")
	if b == '@' {
		tag = Intern("unquotesplicing")
	} else {
		buf.UnreadByte()
	}
	x := read(buf)
	return newListLiteral(tag, x)
}
예제 #6
0
파일: intconv.go 프로젝트: gmwu/go
func scanSign(r io.ByteScanner) (neg bool, err error) {
	var ch byte
	if ch, err = r.ReadByte(); err != nil {
		return false, err
	}
	switch ch {
	case '-':
		neg = true
	case '+':
		// nothing to do
	default:
		r.UnreadByte()
	}
	return
}
예제 #7
0
파일: terminal.go 프로젝트: evmar/smash
func (t *Terminal) readInt(r io.ByteScanner) (int, error) {
	n := 0
	for i := 0; i < 20; i++ {
		c, err := r.ReadByte()
		if err != nil {
			return -1, err
		}
		if c >= '0' && c <= '9' {
			n = n*10 + int(c) - '0'
		} else {
			r.UnreadByte()
			return n, err
		}
	}
	return -1, fmt.Errorf("term: readInt overlong")
}
예제 #8
0
파일: syntax.go 프로젝트: ebb/lumgua
func skipws(buf io.ByteScanner) {
	for {
		b, err := buf.ReadByte()
		if err != nil {
			break
		}
		switch b {
		case ' ', '\t', '\n':
			continue
		case ';':
			nextLine(buf)
			continue
		}
		buf.UnreadByte()
		break
	}
}
예제 #9
0
// parseDocument parses a document.
func (p *Parser) parseDocument(r io.ByteScanner) {
	_, err := r.ReadByte()
	if err != nil {
		return
	}
	r.UnreadByte()
	p.root = addElement(nil, "Document")
	p.current = p.root
	for {
		_, err := r.ReadByte()
		if err != nil {
			break
		}
		r.UnreadByte()
		p.parseLine(r)
	}
}
예제 #10
0
파일: syntax.go 프로젝트: ebb/lumgua
func readList(buf io.ByteScanner) Literal {
	skipws(buf)
	items := []Literal{}
	for {
		b, err := buf.ReadByte()
		if err != nil {
			panic("read: premature end of file")
		}
		if b == ')' {
			break
		}
		buf.UnreadByte()
		items = append(items, read(buf))
		skipws(buf)
	}
	return newListLiteral(items...)
}
예제 #11
0
func consumeValue(rdr io.ByteScanner) ([]byte, error) {
	bs := []byte{}
	for c, err := rdr.ReadByte(); err != io.EOF; c, err = rdr.ReadByte() {
		if err != nil {
			return nil, err
		}
		switch c {
		case '{':
			rdr.UnreadByte()
			return bs, EOS
		case '>', '+', '~', ' ', '\t', '\n', '\f', ',', '.', '#', '[', ':':
			rdr.UnreadByte()
			return bs, nil
		default:
			bs = append(bs, c)
		}
	}
	return bs, nil
}
예제 #12
0
// Read from reader while f holds true, unread bytes if reset == true
func readWhile(reader io.ByteScanner, f func(b byte) bool, reset bool) string {
	s := ""

	for {
		b, err := reader.ReadByte()
		if err != nil {
			return s
		}
		if !f(b) {
			reader.UnreadByte()
			return s
		}
		if reset {
			defer reader.UnreadByte()
		}
		s += string(b)
	}
	return s
}
예제 #13
0
// parseLine parses an unknown line.
func (p *Parser) parseLine(r io.ByteScanner) {
	level := 0
	for {
		c, err := r.ReadByte()
		if err != nil {
			return
		}
		if c == '*' && level == 0 {
			p.closeElement("Paragraph")
			r.UnreadByte()
			p.parseHeader(r)
		} else if c == ':' {
			c, err := r.ReadByte()
			if err != nil {
				r.UnreadByte()
				return
			}
			if c != ' ' {
				p.openElement("Paragraph")
				r.UnreadByte()
				p.startElement("Text")
				p.current.Text = ":"
				p.current.Attr["level"] = fmt.Sprint(level)
				p.parseTextLine(r)
				p.endElement()
				continue
			}
			p.closeElement("Paragraph")
			p.parseExampleLine(r)
			p.nextLine()
			break
		} else if c == ' ' {
			level += 1
			p.nextColumn()
		} else if c == '\n' {
			p.closeElement("Paragraph")
			p.nextLine()
			break
		} else if c == '\r' {
			// Ignore CR character.
			p.nextColumn()
		} else {
			p.openElement("Paragraph")
			r.UnreadByte()
			p.startElement("Text")
			p.current.Attr["level"] = fmt.Sprint(level)
			p.parseTextLine(r)
			p.endElement()
		}
	}
}
예제 #14
0
func parseCombinator(rdr io.ByteScanner, p *Link) error {
	rdr.UnreadByte()
	for c, err := rdr.ReadByte(); err != io.EOF; c, err = rdr.ReadByte() {
		if err != nil {
			return err
		}
		switch c {
		case '{':
			rdr.UnreadByte()
			return EOS
		case ',':
			return fmt.Errorf("Encountered ',' after combinator")
		case ' ', '\t', '\n', '\r', '\f':
		case '>', '+', '~':
			if p.Combinator == Descendant {
				p.Combinator = combinatorMap[c]
			} else {
				return fmt.Errorf("Can't combine multiple combinators")
			}
		default:
			rdr.UnreadByte()
			return nil
		}
	}
	return nil
}
예제 #15
0
func parseSimpleAttr(rdr io.ByteScanner, sel *SimpleSelector) error {
	var name []byte
	var value []byte
	var c1 byte = 0
	for c2, err := rdr.ReadByte(); err != io.EOF; c2, err = rdr.ReadByte() {
		if err != nil {
			return err
		}
		switch c2 {
		case ']':
			sel.AttrName = string(name)
			sel.Value = string(value)
			return nil
		case '=':
			if c1 == '~' {
				sel.AttrMatch = Contains
			} else if c1 == '|' {
				sel.AttrMatch = DashPrefix
			} else {
				sel.AttrMatch = Exactly
			}
		case '{':
			rdr.UnreadByte()
			return EOS
		case '~':
		case '|':
		// TODO(jwall): Substring matchers
		default:
			if sel.AttrMatch == Presence {
				name = append(name, c2)
			} else {
				value = append(value, c2)
			}
		}
		c1 = c2
	}
	return fmt.Errorf("Didn't close Attribute Matcher")
}
예제 #16
0
func parseSequence(rdr io.ByteScanner) (Sequence, error) {
	seq := []SimpleSelector{}
	rdr.UnreadByte()
	for c, err := rdr.ReadByte(); err != io.EOF; c, err = rdr.ReadByte() {
		if err != nil {
			return nil, err
		}
		switch c {
		case '*':
			seq = append(seq, SimpleSelector{Type: Universal})
		case '#':
			sel := SimpleSelector{Type: Id, AttrName: "id"}
			if err := parseSimpleSelector(rdr, &sel); err != nil {
				return nil, err
			}
			seq = append(seq, sel)
		case '.':
			sel := SimpleSelector{Type: Class, AttrName: "class"}
			if err := parseSimpleSelector(rdr, &sel); err != nil {
				return nil, err
			}
			seq = append(seq, sel)
		case ':':
			sel := SimpleSelector{Type: PseudoClass}
			if err := parseSimpleSelector(rdr, &sel); err != nil {
				return nil, err
			}
			seq = append(seq, sel)
		case '[':
			sel := SimpleSelector{Type: Attr}
			if err := parseSimpleAttr(rdr, &sel); err != nil {
				return nil, err
			}
			seq = append(seq, sel)
		case '{':
			rdr.UnreadByte()
			return seq, EOS
		case ' ', '\t', '\n', '\r', '\f', '>', '+', '~':
			rdr.UnreadByte()
			return seq, nil
		default:
			sel := SimpleSelector{Type: Tag, Tag: string(c)}
			if err := parseSimpleTag(rdr, &sel); err != nil {
				return nil, err
			}
			seq = append(seq, sel)
		}
	}
	return seq, nil
}
예제 #17
0
파일: ratconv.go 프로젝트: RajibTheKing/gcc
// scanExponent scans the longest possible prefix of r representing a decimal
// ('e', 'E') or binary ('p') exponent, if any. It returns the exponent, the
// exponent base (10 or 2), or a read or syntax error, if any.
//
//	exponent = ( "E" | "e" | "p" ) [ sign ] digits .
//	sign     = "+" | "-" .
//	digits   = digit { digit } .
//	digit    = "0" ... "9" .
//
// A binary exponent is only permitted if binExpOk is set.
func scanExponent(r io.ByteScanner, binExpOk bool) (exp int64, base int, err error) {
	base = 10

	var ch byte
	if ch, err = r.ReadByte(); err != nil {
		if err == io.EOF {
			err = nil // no exponent; same as e0
		}
		return
	}

	switch ch {
	case 'e', 'E':
		// ok
	case 'p':
		if binExpOk {
			base = 2
			break // ok
		}
		fallthrough // binary exponent not permitted
	default:
		r.UnreadByte()
		return // no exponent; same as e0
	}

	var neg bool
	if neg, err = scanSign(r); err != nil {
		return
	}

	var digits []byte
	if neg {
		digits = append(digits, '-')
	}

	// no need to use nat.scan for exponent digits
	// since we only care about int64 values - the
	// from-scratch scan is easy enough and faster
	for i := 0; ; i++ {
		if ch, err = r.ReadByte(); err != nil {
			if err != io.EOF || i == 0 {
				return
			}
			err = nil
			break // i > 0
		}
		if ch < '0' || '9' < ch {
			if i == 0 {
				r.UnreadByte()
				err = fmt.Errorf("invalid exponent (missing digits)")
				return
			}
			break // i > 0
		}
		digits = append(digits, byte(ch))
	}
	// i > 0 => we have at least one digit

	exp, err = strconv.ParseInt(string(digits), 10, 64)
	return
}
예제 #18
0
// parseTextLine parses a text line. This does not create an element.
func (p *Parser) parseTextLine(r io.ByteScanner) {
	for {
		c, err := r.ReadByte()
		if err != nil {
			return
		}
		if c == '\n' {
			p.nextLine()
			break
		}
		if c == '\r' {
			// Ignore CR character.
			p.nextColumn()
			continue
		}
		if c == ']' {
			if p.current.Name == "Link" || (p.current.Name == "Text" && p.current.Parent.Name == "Link") {
				r.UnreadByte()
				return
			} else {
				p.addError("ParseTextLink", "unexpected ]")
				p.nextColumn()
				return
			}
		}
		if c == '[' {
			if p.current.Name == "Text" {
				p.nextColumn()
				p.endElement()
				p.parseLink(r)
				p.startElement("Text")
			} else {
				p.addError("ParseTextLink", "type is "+p.current.Name)
				p.nextColumn()
			}
			continue
		}
		if c == '*' && p.current.Name == "Text" {
			if p.isInElement("Bold") {
				p.closeElement("Bold")
			} else {
				p.startElement("Bold")
			}
			p.startElement("Text")
			p.nextColumn()
			continue
		}
		if c == '_' && p.current.Name == "Text" {
			if p.isInElement("Underline") {
				p.closeElement("Underline")
			} else {
				p.openElement("Underline")
			}
			p.startElement("Text")
			p.nextColumn()
			continue
		}
		if c == '/' && p.current.Name == "Text" {
			if p.isInElement("Italic") {
				p.closeElement("Italic")
			} else {
				p.openElement("Italic")
			}
			p.startElement("Text")
			p.nextColumn()
			continue
		}
		p.nextColumn()
		p.current.Text += string(c)
	}
}
예제 #19
0
파일: natconv.go 프로젝트: Greentor/go
// scan scans the number corresponding to the longest possible prefix
// from r representing an unsigned number in a given conversion base.
// It returns the corresponding natural number res, the actual base b,
// a digit count, and a read or syntax error err, if any.
//
//	number   = [ prefix ] mantissa .
//	prefix   = "0" [ "x" | "X" | "b" | "B" ] .
//      mantissa = digits | digits "." [ digits ] | "." digits .
//	digits   = digit { digit } .
//	digit    = "0" ... "9" | "a" ... "z" | "A" ... "Z" .
//
// Unless fracOk is set, the base argument must be 0 or a value between
// 2 and MaxBase. If fracOk is set, the base argument must be one of
// 0, 2, 10, or 16. Providing an invalid base argument leads to a run-
// time panic.
//
// For base 0, the number prefix determines the actual base: A prefix of
// ``0x'' or ``0X'' selects base 16; if fracOk is not set, the ``0'' prefix
// selects base 8, and a ``0b'' or ``0B'' prefix selects base 2. Otherwise
// the selected base is 10 and no prefix is accepted.
//
// If fracOk is set, an octal prefix is ignored (a leading ``0'' simply
// stands for a zero digit), and a period followed by a fractional part
// is permitted. The result value is computed as if there were no period
// present; and the count value is used to determine the fractional part.
//
// A result digit count > 0 corresponds to the number of (non-prefix) digits
// parsed. A digit count <= 0 indicates the presence of a period (if fracOk
// is set, only), and -count is the number of fractional digits found.
// In this case, the actual value of the scanned number is res * b**count.
//
func (z nat) scan(r io.ByteScanner, base int, fracOk bool) (res nat, b, count int, err error) {
	// reject illegal bases
	baseOk := base == 0 ||
		!fracOk && 2 <= base && base <= MaxBase ||
		fracOk && (base == 2 || base == 10 || base == 16)
	if !baseOk {
		panic(fmt.Sprintf("illegal number base %d", base))
	}

	// one char look-ahead
	ch, err := r.ReadByte()
	if err != nil {
		return
	}

	// determine actual base
	b = base
	if base == 0 {
		// actual base is 10 unless there's a base prefix
		b = 10
		if ch == '0' {
			count = 1
			switch ch, err = r.ReadByte(); err {
			case nil:
				// possibly one of 0x, 0X, 0b, 0B
				if !fracOk {
					b = 8
				}
				switch ch {
				case 'x', 'X':
					b = 16
				case 'b', 'B':
					b = 2
				}
				switch b {
				case 16, 2:
					count = 0 // prefix is not counted
					if ch, err = r.ReadByte(); err != nil {
						// io.EOF is also an error in this case
						return
					}
				case 8:
					count = 0 // prefix is not counted
				}
			case io.EOF:
				// input is "0"
				res = z[:0]
				err = nil
				return
			default:
				// read error
				return
			}
		}
	}

	// convert string
	// Algorithm: Collect digits in groups of at most n digits in di
	// and then use mulAddWW for every such group to add them to the
	// result.
	z = z[:0]
	b1 := Word(b)
	bn, n := maxPow(b1) // at most n digits in base b1 fit into Word
	di := Word(0)       // 0 <= di < b1**i < bn
	i := 0              // 0 <= i < n
	dp := -1            // position of decimal point
	for {
		if fracOk && ch == '.' {
			fracOk = false
			dp = count
			// advance
			if ch, err = r.ReadByte(); err != nil {
				if err == io.EOF {
					err = nil
					break
				}
				return
			}
		}

		// convert rune into digit value d1
		var d1 Word
		switch {
		case '0' <= ch && ch <= '9':
			d1 = Word(ch - '0')
		case 'a' <= ch && ch <= 'z':
			d1 = Word(ch - 'a' + 10)
		case 'A' <= ch && ch <= 'Z':
			d1 = Word(ch - 'A' + 10)
		default:
			d1 = MaxBase + 1
		}
		if d1 >= b1 {
			r.UnreadByte() // ch does not belong to number anymore
			break
		}
		count++

		// collect d1 in di
		di = di*b1 + d1
		i++

		// if di is "full", add it to the result
		if i == n {
			z = z.mulAddWW(z, bn, di)
			di = 0
			i = 0
		}

		// advance
		if ch, err = r.ReadByte(); err != nil {
			if err == io.EOF {
				err = nil
				break
			}
			return
		}
	}

	if count == 0 {
		// no digits found
		switch {
		case base == 0 && b == 8:
			// there was only the octal prefix 0 (possibly followed by digits > 7);
			// count as one digit and return base 10, not 8
			count = 1
			b = 10
		case base != 0 || b != 8:
			// there was neither a mantissa digit nor the octal prefix 0
			err = errors.New("syntax error scanning number")
		}
		return
	}
	// count > 0

	// add remaining digits to result
	if i > 0 {
		z = z.mulAddWW(z, pow(b1, i), di)
	}
	res = z.norm()

	// adjust for fraction, if any
	if dp >= 0 {
		// 0 <= dp <= count > 0
		count = dp - count
	}

	return
}
예제 #20
0
// parseLink parses a link. Format is [[link]] or [[link][text]].
func (p *Parser) parseLink(r io.ByteScanner) {
	// Start of link is already consumed.
	const (
		start = iota
		link
		middle
		text
		end
	)
	state := start
	p.startElement("Link")
	defer p.endElement()
	for {
		c, err := r.ReadByte()
		if err != nil {
			p.addError("ParseLink", "unexpected EOF")
			return
		}
		if c == '[' {
			p.nextColumn()
			if state == start {
				state = link
			} else if state == middle {
				state = text
			} else {
				p.addError("ParseLink", "unexpected [")
				return
			}
		} else if c == ']' {
			p.nextColumn()
			if state == link {
				state = middle
			} else if state == text {
				state = end
			} else if state == middle {
				break
			} else if state == end {
				return
			} else {
				p.addError("ParseLink", "unexpected ]")
				return
			}
		} else if c == ' ' {
			p.nextColumn()
			continue
		} else {
			if state == link {
				r.UnreadByte()
				p.parseTextLine(r)
				p.current.Attr["link"] += p.current.Text
				p.current.Text = ""
			} else if state == text {
				r.UnreadByte()
				p.startElement("Text")
				p.parseTextLine(r)
				p.endElement()
			} else {
				p.nextColumn()
				p.addError("ParseLink", "unexpected character")
				return
			}
		}
	}
	if len(p.current.Children) == 0 {
		p.startElement("Text")
		p.endElement()
	}
}
예제 #21
0
파일: terminal.go 프로젝트: evmar/smash
func (t *Terminal) readCSI(r io.ByteScanner) error {
	// CSI
	var args []int

	qflag := false
	gtflag := false
L:
	c, err := r.ReadByte()
	if err != nil {
		return err
	}

	switch {
	case c >= '0' && c <= '9':
		r.UnreadByte()
		n, err := t.readInt(r)
		if err != nil {
			return err
		}
		args = append(args, n)

		c, err = r.ReadByte()
		if err != nil {
			return err
		}
		if c == ';' {
			goto L
		}
	case c == '?':
		qflag = true
		goto L
	case c == '>':
		gtflag = true
		goto L
	}

	switch {
	case c == '@': // insert blanks
		n := 1
		readArgs(args, &n)
		for i := 0; i < n; i++ {
			t.Lines[t.Row] = append(t.Lines[t.Row], Cell{})
		}
		copy(t.Lines[t.Row][t.Col+n:], t.Lines[t.Row][t.Col:])
		for i := 0; i < n; i++ {
			t.Lines[t.Row][t.Col+i] = Cell{' ', 0}
		}
	case c == 'A': // cursor up
		dy := 1
		readArgs(args, &dy)
		t.Row -= dy
		if t.Row < 0 {
			log.Printf("term: cursor up off top of screen?")
			t.Row = 0
		}
		t.fixPosition()
	case c == 'C': // cursor forward
		dx := 1
		readArgs(args, &dx)
		t.Col += dx
		t.fixPosition()
	case c == 'D': // cursor back
		dx := 1
		readArgs(args, &dx)
		t.Col -= dx
		t.fixPosition()
	case c == 'G': // cursor character absolute
		x := 1
		readArgs(args, &x)
		t.Col = x - 1
		t.fixPosition()
	case c == 'H': // move to position
		row := 1
		col := 1
		readArgs(args, &row, &col)
		t.Row = t.Top + row - 1
		t.Col = col - 1
		t.fixPosition()
	case c == 'J': // erase in display
		arg := 0
		readArgs(args, &arg)
		switch arg {
		case 0: // erase to end
			t.Lines = t.Lines[:t.Row+1]
			t.Lines[t.Row] = t.Lines[t.Row][:t.Col]
		case 2: // erase all
			t.Lines = t.Lines[:0]
			t.Row = 0
			t.Col = 0
			t.fixPosition()
		default:
			log.Printf("term: unknown erase in display %v", args)
		}
	case c == 'K': // erase in line
		arg := 0
		readArgs(args, &arg)
		switch arg {
		case 0: // erase to right
			t.Lines[t.Row] = t.Lines[t.Row][:t.Col]
		case 1:
			for i := 0; i < t.Col; i++ {
				t.Lines[t.Row][i] = Cell{' ', 0}
			}
		case 2:
			t.TODOs.Add("erase all line")
		default:
			log.Printf("term: unknown erase in line %v", args)
		}
	case c == 'L': // insert lines
		n := 1
		readArgs(args, &n)
		for i := 0; i < n; i++ {
			t.Lines = append(t.Lines, nil)
		}
		copy(t.Lines[t.Row+n:], t.Lines[t.Row:])
		for i := 0; i < n; i++ {
			t.Lines[t.Row+i] = make([]Cell, 0)
		}
	case c == 'P': // erase in line
		arg := 1
		readArgs(args, &arg)
		l := t.Lines[t.Row]
		if t.Col+arg > len(l) {
			arg = len(l) - t.Col
		}
		copy(l[t.Col:], l[t.Col+arg:])
		t.Lines[t.Row] = l[:len(l)-arg]
	case c == 'X': // erase characters
		t.TODOs.Add("erase characters %v", args)
	case !gtflag && c == 'c': // send device attributes (primary)
		t.TODOs.Add("send device attributes (primary) %v", args)
	case gtflag && c == 'c': // send device attributes (secondary)
		arg := 0
		readArgs(args, &arg)
		switch arg {
		case 0: // terminal id
			// ID is
			//   0 -> VT100
			//   0 -> firmware version 0
			//   0 -> always-zero param
			_, err := t.Input.Write([]byte("\x1b[0;0;0c"))
			return err
		default:
			t.TODOs.Add("send device attributes (secondary) %v", args)
		}
	case c == 'd': // line position
		arg := 1
		readArgs(args, &arg)
		t.Row = arg - 1
		t.fixPosition()
	case !qflag && (c == 'h' || c == 'l'): // reset mode
		reset := c == 'l'
		arg := 0
		readArgs(args, &arg)
		switch arg {
		default:
			t.TODOs.Add("reset mode %d %v", arg, reset)
		}
	case qflag && (c == 'h' || c == 'l'): // DEC private mode set/reset
		set := c == 'h'
		arg := 0
		readArgs(args, &arg)
		switch arg {
		case 1:
			t.TODOs.Add("application cursor keys mode")
		case 7: // wraparound mode
			t.TODOs.Add("wraparound mode")
		case 12: // blinking cursor
			// Ignore; this appears in cnorm/cvvis as a way to adjust the
			// "very visible cursor" state.
		case 25: // show cursor
			t.HideCursor = !set
		case 1049: // alternate screen buffer
			t.TODOs.Add("alternate screen buffer %v", set)
		default:
			log.Printf("term: unknown dec private mode %v %v", args, set)
		}
	case c == 'm': // reset
		if len(args) == 0 {
			args = append(args, 0)
		}
		for _, arg := range args {
			switch {
			case arg == 0:
				t.Attr = 0
			case arg == 1:
				t.Attr.SetBright(true)
			case arg == 7:
				t.Attr.SetInverse(true)
			case arg == 27:
				t.Attr.SetInverse(false)
			case arg >= 30 && arg < 40:
				t.Attr.SetColor(mapColor(arg-30, arg))
			case arg >= 40 && arg < 50:
				t.Attr.SetBackColor(mapColor(arg-40, arg))
			default:
				log.Printf("term: unknown color %v", args)
			}
		}
	case gtflag && c == 'n': // disable modifiers
		arg := 2
		readArgs(args, &arg)
		switch arg {
		case 0:
			t.TODOs.Add("disable modify keyboard")
		case 1:
			t.TODOs.Add("disable modify cursor keys")
		case 2:
			t.TODOs.Add("disable modify function keys")
		case 4:
			t.TODOs.Add("disable modify other keys")
		}
	case c == 'n': // device status report
		arg := 0
		readArgs(args, &arg)
		switch arg {
		case 5:
			_, err := t.Input.Write([]byte("\x1b[0n"))
			return err
		case 6:
			pos := fmt.Sprintf("\x1b[%d;%dR", t.Row+1, t.Col+1)
			_, err := t.Input.Write([]byte(pos))
			return err
		default:
			log.Printf("term: unknown status report arg %v", args)
		}
	case c == 'r': // set scrolling region
		top, bot := 1, 1
		readArgs(args, &top, &bot)
		if top == 1 && bot == t.Height {
			// Just setting the current region as scroll.
		} else {
			t.TODOs.Add("set scrolling region %v", args)
		}
	default:
		log.Printf("term: unknown CSI %v %s", args, showChar(c))
	}
	return nil
}
예제 #22
0
// Match provides a simple sequential ASCII text matcher.
// It is specialized for processing well formed, structured printable ASCII.
// s yields input bytes and p yields pattern bytes.
// n and o correspond to the number of bytes read from s and p, respectively.
// If m is non-nil, len(m) should be greater than or equal to the number of
// capture-bytes in the pattern.
//
// Patterns:
//  * Printable ASCII bytes will be matched literally.
//  * All groups (specified by non-printable bytes in the pattern stream)
//    are non-greedy, and match zero or more characters.
//  * \x00: ASCII whitespace bytes.
//  * \x01: non-whitespace ASCII bytes.
//  * \xa0: lowercase letters.
//  * \xa1: uppercase letters.
//  * \xaf: letters.
//  * \xd0: decimal digits.
//  * \xd6: hexadecimal digits.
//  * \xd8: octal digits.
//  * \xd3: base-36 digits.
//  * \xfe: printable ASCII bytes.
//  * \xff: 8-bit bytes.
//  * All groups are capturing beside \x00.
//  * Use of other non-printable or non-ASCII bytes is undefined.
func Match(s, p io.ByteScanner, m []string) (n, o int, err error) {
	var (
		quit = false
		buf  = make([]byte, 0, 1024)
		a, b byte
		c    byte
		v    int
	)
	for !quit {
		a, err = p.ReadByte()
		switch {
		case err == io.EOF:
			err = nil
			fallthrough
		case err != nil:
			return
		}
		o++
		if tab[a]&prg == 0 {
			c, err = s.ReadByte()
			if err != nil {
				return
			}
			n++
			if a == c {
				continue
			} else if err = s.UnreadByte(); err == nil {
				err = ErrByteMismatch
				n--
			}
			return
		}
		a = tab[a]
		b, err = p.ReadByte()
		if err == io.EOF {
			b = nop
		} else if err != nil {
			return
		} else if err = p.UnreadByte(); err != nil {
			o++
			return
		}
		for {
			c, err = s.ReadByte()
			if err != nil {
				quit = true
				goto fill
			}
			n++
			if tab[b]&prg == 0 && c == b ||
				tab[b]&prg != 0 && tab[c]&tab[b] != 0 ||
				a != any && tab[c]&a == 0 {
				break
			} else if a&^prg != ws {
				buf = append(buf, c)
			}
		}
		if err = s.UnreadByte(); err == nil {
			err = io.EOF
			n--
		}
	fill:
		if a&^prg != ws {
			if _, ok := s.(*rb); ok {
				revbytes(buf)
			}
			m[v] = string(buf)
			v++
			buf = buf[:0]
		}
	}
	return
}