func (m *MBC5) Write(addr types.Word, value byte) {
switch {
case addr >= 0x0000 && addr <= 0x1FFF:
if m.hasRAM {
if r := value & 0x0F; r == 0x0A {
m.ramEnabled = true
} else {
m.ramEnabled = false
}
}
case addr >= 0x2000 && addr <= 0x2FFF:
//lower 8 bits of rom bank are set here
m.ROMBLower = types.Word(value)
m.switchROMBank(int(m.ROMBLower | m.ROMBHigher<<8))
case addr >= 0x3000 && addr <= 0x3FFF:
//lowest bit of this value allows you to select banks > 256
m.ROMBHigher = types.Word(value & 0x01)
m.switchROMBank(int(m.ROMBLower | m.ROMBHigher<<8))
case addr >= 0x4000 && addr <= 0x5FFF:
m.switchRAMBank(int(value & 0x03))
case addr >= 0xA000 && addr <= 0xBFFF:
if m.hasRAM && m.ramEnabled {
m.ramBanks[m.selectedRAMBank][addr-0xA000] = value
}
}
}
func (g *GPU) RenderBackgroundScanline() {
//find where in the tile map we are related to the current scan line + scroll Y (wraps around)
screenYAdjusted := int(g.ly) + int(g.scrollY)
var initialTilemapOffset types.Word = g.bgTilemap + types.Word(screenYAdjusted)%256/8*32
var initialLineOffset types.Word = types.Word(g.scrollX) / 8 % 32
//find where in the tile we are
initialTileX := int(g.scrollX) % 8
initialTileY := screenYAdjusted % 8
//screen will always draw from X = 0
g.DrawScanline(initialTilemapOffset, initialLineOffset, 0, initialTileX, initialTileY)
}
func (mmu *GbcMMU) doInstantDMATransfer(startAddress, destinationAddr types.Word, blocks, blockSize int) {
length := types.Word(blockSize * blocks)
var i types.Word = 0x0000
for ; i < length; i++ {
data := mmu.ReadByte(startAddress + i)
mmu.WriteByte(destinationAddr+i, data)
}
}
func ToMemoryAddress(s string) (types.Word, error) {
if len(s) > 4 {
return 0x0, errors.New("Please enter an address between 0000 and FFFF")
}
result, err := strconv.ParseInt(s, 16, 64)
return types.Word(result), err
}
//This area deals with registers (some only applicable to CGB hardware)
func (mmu *GbcMMU) WriteByteToRegister(addr types.Word, value byte) {
switch addr {
case DMG_STATUS_REG:
mmu.dmgStatusRegister = value
case CGB_DOUBLE_SPEED_PREP_REG:
if mmu.RunningColorGBHardware == false {
log.Printf("%s: WARNING -> Cannot write to %s in non-CGB mode! ROM may have unexpected behaviour (ROM is probably unsupported in non-CGB mode)", PREFIX, CGB_WRAM_BANK_SELECT)
} else {
mmu.cgbDoubleSpeedPreparationRegister = value
}
case CGB_INFRARED_PORT_REG:
log.Printf("%s: Attempting to write 0x%X to infrared port register (%s), this is currently unsupported", PREFIX, value, addr)
//Color GB Working RAM Bank Selection
case CGB_WRAM_BANK_SELECT:
if mmu.RunningColorGBHardware == false {
log.Printf("%s: WARNING -> Cannot write to %s in non-CGB mode! ROM may have unexpected behaviour (ROM is probably unsupported in non-CGB mode)", PREFIX, CGB_WRAM_BANK_SELECT)
} else {
mmu.cgbWramBankSelectedRegister = value
}
case CGB_HDMA_SOURCE_HIGH_REG:
mmu.hdmaTransferInfo.Source = (mmu.hdmaTransferInfo.Source & 0x00FF) | types.Word(value)<<8
case CGB_HDMA_SOURCE_LOW_REG:
mmu.hdmaTransferInfo.Source = (mmu.hdmaTransferInfo.Source & 0xFF00) | types.Word(value)
case CGB_HDMA_DEST_HIGH_REG:
mmu.hdmaTransferInfo.Destination = (mmu.hdmaTransferInfo.Destination & 0x00FF) | types.Word(value)<<8
case CGB_HDMA_DEST_LOW_REG:
mmu.hdmaTransferInfo.Destination = (mmu.hdmaTransferInfo.Destination & 0xFF00) | types.Word(value)
case CGB_HDMA_REG:
if mmu.RunningColorGBHardware == false {
log.Printf("%s: WARNING -> Cannot write to %s in non-CGB mode! ROM may have unexpected behaviour (ROM is probably unsupported in non-CGB mode)", PREFIX, CGB_WRAM_BANK_SELECT)
} else {
if value&0x80 == 0x00 {
mmu.hdmaTransferInfo.Length = int(value&0x7F) + 1
mmu.hdmaTransferInfo.Running = true
mmu.doInstantDMATransfer(mmu.hdmaTransferInfo.Source, mmu.hdmaTransferInfo.Destination, mmu.hdmaTransferInfo.Length, 16)
} else {
log.Println("HDMA horizontal HBlank is unsupported at the moment ")
}
}
default:
//unknown register, who cares?
mmu.emptySpace[addr-0xFF4D] = value
}
}
//method to calculate the tilenumber within the tilemap
func (g *GPU) calculateTileNo(tilemapOffset types.Word, lineOffset types.Word) int {
tileId := int(g.Read(types.Word(tilemapOffset + lineOffset)))
//if tile data is 0 then it is signed
if g.tileDataSelect == TILEDATA0 {
if tileId < 128 {
tileId += 256
}
}
return tileId
}
func (g *GPU) DumpTilemap(tileMapAddr types.Word, tileDataSigned bool) [256][256]types.RGB {
fmt.Print("Dumping Tilemap ", tileMapAddr)
if tileDataSigned {
fmt.Println(" (signed)")
} else {
fmt.Println(" (unsigned)")
}
var result [256][256]types.RGB
var tileMapAddrOffset types.Word = tileMapAddr
var rx int = 0
var ry int = 0
for lineX := 0; lineX < 32; lineX++ {
for tileY := 0; tileY < 8; tileY++ {
for lineY := 0; lineY < 32; lineY++ {
tileId := int(g.Read(tileMapAddrOffset + types.Word(lineY)))
if tileDataSigned {
if tileId < 128 {
tileId += 256
}
}
tile := g.tiledata[0][tileId]
for tileX := 0; tileX < 8; tileX++ {
cr := GBColours[tile[tileY][tileX]]
result[rx][ry] = cr
rx++
}
}
rx = 0
ry++
}
tileMapAddrOffset += types.Word(32)
}
return result
}
func (g *GPU) RenderWindowScanline() {
screenYAdjusted := g.ly - int(g.windowY)
if (g.windowX >= 0 && g.windowX < 167) && (g.windowY >= 0 && g.windowY < 144) && screenYAdjusted >= 0 {
var initialTilemapOffset types.Word = g.windowTilemap + types.Word(screenYAdjusted)/8*32
var initialLineOffset types.Word = 0
var screenXAdjusted int = int((g.windowX - 7) % 255)
//find where in the tile we are
initialTileX := screenXAdjusted % 8
initialTileY := screenYAdjusted % 8
g.DrawScanline(initialTilemapOffset, initialLineOffset, screenXAdjusted, initialTileX, initialTileY)
}
}
func (mmu *GbcMMU) WriteByte(addr types.Word, value byte) {
//Check peripherals first
if p, ok := mmu.peripheralIOMap[addr]; ok {
p.Write(addr, value)
return
}
switch {
case addr >= 0x0000 && addr <= 0x9FFF:
mmu.cartridge.MBC.Write(addr, value)
//Cartridge External RAM
case addr >= 0xA000 && addr <= 0xBFFF:
mmu.cartridge.MBC.Write(addr, value)
//GB Internal RAM
case addr >= 0xC000 && addr <= 0xDFFF:
mmu.WriteToWorkingRAM(addr, value)
//copy value to shadow if within shadow range
if addr >= 0xC000 && addr <= 0xDDFF {
mmu.internalRAMShadow[addr&(0xDDFF-0xC000)] = mmu.ReadByte(addr)
}
case addr == 0xFF01 || addr == 0xFF02:
//serial cable communication
mmu.serialTmp = ZERO
//INTERRUPT FLAG
case addr == 0xFF0F:
mmu.interruptsFlag = value
//DMA transfer
case addr == 0xFF46:
var startAddr types.Word = types.Word(value) << 8
var oamAddr types.Word = 0xFE00
//transfer 10 blocks to OAM
mmu.doInstantDMATransfer(startAddr, oamAddr, 10, 16)
//Empty but "unusable for I/O"
case addr > 0xFF4C && addr <= 0xFF7F:
mmu.WriteByteToRegister(addr, value)
//Zero page RAM
case addr >= 0xFF80 && addr <= 0xFFFF:
if addr == 0xFFFF {
mmu.interruptsEnabled = value
} else {
mmu.zeroPageRAM[addr&(0xFFFF-0xFF80)] = value
}
default:
//log.Printf("%s: WARNING - Attempting to write 0x%X to address %s, this is invalid/unimplemented", PREFIX, value, addr)
}
}
//CGB has additional attributes in bank 1 for each background tile
func (g *GPU) getCGBBackgroundTileAttrs(tilemapOffset types.Word, lineOffset types.Word) (int, *CGBBackgroundTileAttrs) {
if g.RunningColorGBHardware {
var currentSelectedBankTmp byte = g.cgbVramBankSelectionRegister
//tile number data always comes from bank 0
g.cgbVramBankSelectionRegister = 0
var tileNo int = g.calculateTileNo(tilemapOffset, lineOffset)
//tile attribute data always comes from bank 1
g.cgbVramBankSelectionRegister = 1
var attributeData byte = g.Read(types.Word(tilemapOffset + lineOffset))
//revert bank selection register to what it was set to previously
g.cgbVramBankSelectionRegister = currentSelectedBankTmp
return tileNo, NewCGBBackgroundTileAttrs(attributeData)
} else {
panic("Cannot call this function, not in color gb mode!")
}
return -1, nil
}
func (m *MockMMU) ReadWord(address types.Word) types.Word {
a, b := m.memory[address], m.memory[address+1]
return (types.Word(a) << 8) ^ types.Word(b)
}
func (mmu *GbcMMU) ReadWord(addr types.Word) types.Word {
var b1 byte = mmu.ReadByte(addr)
var b2 byte = mmu.ReadByte(addr + 1)
return types.Word(utils.JoinBytes(b1, b2))
}