Exemplo n.º 1
0
func main() {
	ignoreIfaceNames := make(stringList)

	mflag.Var(&ignoreIfaceNames, []string{"-ignore-iface"}, "name of interface to ignore)")
	mflag.Parse()

	if len(mflag.Args()) < 1 {
		fmt.Fprintln(os.Stderr, "usage: netcheck [--ignore-iface <iface-name>] network-cidr")
		os.Exit(1)
	}

	cidrStr := mflag.Args()[0]
	addr, ipnet, err := net.ParseCIDR(cidrStr)
	if err != nil {
		fatal(err)
	}
	if ipnet.IP.Equal(addr) {
		err = weavenet.CheckNetworkFree(ipnet, ignoreIfaceNames)
	} else {
		err = weavenet.CheckAddressOverlap(addr, ignoreIfaceNames)
	}
	if err != nil {
		fatal(err)
	}
	os.Exit(0)
}
Exemplo n.º 2
0
// checkRepoList gets the list of repositories to process from the command line
// and from the repoList file.
func checkRepoList(initial bool) (updates bool) {
	newList := make(map[collector.RepoType]bool)

	// check repositories specified on the command line
	if len(flag.Args()) > 1 {
		for _, repo := range flag.Args()[1:] {
			newList[collector.RepoType(repo)] = true
			if initial {
				updates = true
			}
		}
	}
	// check repositories specified in the repoList file. Ignore file read errors.
	data, err := ioutil.ReadFile(*repoList)
	if err != nil {
		if initial {
			blog.Info("Repolist: " + *repoList + " not specified")
		}
	} else {
		arr := strings.Split(string(data), "\n")
		for _, line := range arr {
			// skip over comments and whitespace
			arr := strings.Split(line, "#")
			repo := arr[0]
			repotrim := strings.TrimSpace(repo)
			if repotrim != "" {
				r := collector.RepoType(repotrim)
				newList[r] = true
				if _, ok := collector.ReposToProcess[r]; !ok {
					updates = true
				}
			}
		}
	}

	if len(newList) == 0 {
		collector.ReposToProcess = newList
		return
	}
	collector.ReposToProcess = newList
	if searchTerm := collector.NeedRegistrySearch(); searchTerm != "" {
		config.FilterRepos = false
	} else {
		config.FilterRepos = true
	}
	if updates {
		blog.Info("Limiting collection to the following repos:")
		for repo := range newList {
			blog.Info(repo)
		}
	}
	return
}
Exemplo n.º 3
0
// TODO: remove once `-d` is retired
func handleGlobalDaemonFlag() {
	// This block makes sure that if the deprecated daemon flag `--daemon` is absent,
	// then all daemon-specific flags are absent as well.
	if !*flDaemon && daemonFlags != nil {
		flag.CommandLine.Visit(func(fl *flag.Flag) {
			for _, name := range fl.Names {
				name := strings.TrimPrefix(name, "#")
				if daemonFlags.Lookup(name) != nil {
					// daemon flag was NOT specified, but daemon-specific flags were
					// so let's error out
					fmt.Fprintf(os.Stderr, "docker: the daemon flag '-%s' must follow the 'docker daemon' command.\n", name)
					os.Exit(1)
				}
			}
		})
	}

	if *flDaemon {
		if *flHelp {
			// We do not show the help output here, instead, we tell the user about the new daemon command,
			// because the help output is so long they would not see the warning anyway.
			fmt.Fprintln(os.Stderr, "Please use 'docker daemon --help' instead.")
			os.Exit(0)
		}
		daemonCli.(*DaemonCli).CmdDaemon(flag.Args()...)
		os.Exit(0)
	}
}
Exemplo n.º 4
0
func main() {
	if reexec.Init() {
		return
	}

	// Set terminal emulation based on platform as required.
	stdin, stdout, stderr := term.StdStreams()

	logrus.SetOutput(stderr)

	flag.Merge(flag.CommandLine, clientFlags.FlagSet, commonFlags.FlagSet)

	flag.Usage = func() {
		fmt.Fprint(os.Stdout, "Usage: docker [OPTIONS] COMMAND [arg...]\n"+daemonUsage+"       docker [ -h | --help | -v | --version ]\n\n")
		fmt.Fprint(os.Stdout, "A self-sufficient runtime for containers.\n\nOptions:\n")

		flag.CommandLine.SetOutput(os.Stdout)
		flag.PrintDefaults()

		help := "\nCommands:\n"

		for _, cmd := range dockerCommands {
			help += fmt.Sprintf("    %-10.10s%s\n", cmd.name, cmd.description)
		}

		help += "\nRun 'docker COMMAND --help' for more information on a command."
		fmt.Fprintf(os.Stdout, "%s\n", help)
	}

	flag.Parse()

	if *flVersion {
		showVersion()
		return
	}

	clientCli := client.NewDockerCli(stdin, stdout, stderr, clientFlags)
	// TODO: remove once `-d` is retired
	handleGlobalDaemonFlag()

	if *flHelp {
		// if global flag --help is present, regardless of what other options and commands there are,
		// just print the usage.
		flag.Usage()
		return
	}

	c := cli.New(clientCli, daemonCli)
	if err := c.Run(flag.Args()...); err != nil {
		if sterr, ok := err.(cli.StatusError); ok {
			if sterr.Status != "" {
				fmt.Fprintln(os.Stderr, sterr.Status)
				os.Exit(1)
			}
			os.Exit(sterr.StatusCode)
		}
		fmt.Fprintln(os.Stderr, err)
		os.Exit(1)
	}
}
Exemplo n.º 5
0
func main() {
	mflag.BoolVar(&useScheduler, []string{"scheduler"}, false, "Use scheduler to distribute tests across shards")
	mflag.BoolVar(&runParallel, []string{"parallel"}, false, "Run tests in parallel on hosts where possible")
	mflag.BoolVar(&verbose, []string{"v"}, false, "Print output from all tests (Also enabled via DEBUG=1)")
	mflag.StringVar(&schedulerHost, []string{"scheduler-host"}, defaultSchedulerHost, "Hostname of scheduler.")
	mflag.Parse()

	if len(os.Getenv("DEBUG")) > 0 {
		verbose = true
	}

	tests, err := getTests(mflag.Args())
	if err != nil {
		fmt.Printf("Error parsing tests: %v\n", err)
		os.Exit(1)
	}

	hosts := strings.Fields(os.Getenv("HOSTS"))
	maxHosts := len(hosts)
	if maxHosts == 0 {
		fmt.Print("No HOSTS specified.\n")
		os.Exit(1)
	}

	var errored bool
	if runParallel {
		errored = parallel(tests, hosts)
	} else {
		errored = sequential(tests, hosts)
	}

	if errored {
		os.Exit(1)
	}
}
Exemplo n.º 6
0
func main() {
	mflag.BoolVar(&useScheduler, []string{"scheduler"}, false, "Use scheduler to distribute tests across shards")
	mflag.BoolVar(&runParallel, []string{"parallel"}, false, "Run tests in parallel on hosts where possible")
	mflag.Parse()

	tests, err := getTests(mflag.Args())
	if err != nil {
		fmt.Printf("Error parsing tests: %v\n", err)
		os.Exit(1)
	}

	hosts := strings.Fields(os.Getenv("HOSTS"))
	maxHosts := len(hosts)
	if maxHosts == 0 {
		fmt.Print("No HOSTS specified.\n")
		os.Exit(1)
	}

	var errored bool
	if runParallel {
		errored = parallel(tests, hosts)
	} else {
		errored = sequential(tests, hosts)
	}

	if errored {
		os.Exit(1)
	}
}
Exemplo n.º 7
0
func dnetCommand(stdout, stderr io.Writer) error {
	flag.Parse()

	if *flHelp {
		flag.Usage()
		return nil
	}

	if *flLogLevel != "" {
		lvl, err := logrus.ParseLevel(*flLogLevel)
		if err != nil {
			fmt.Fprintf(stderr, "Unable to parse logging level: %s\n", *flLogLevel)
			return err
		}
		logrus.SetLevel(lvl)
	} else {
		logrus.SetLevel(logrus.InfoLevel)
	}

	if *flDebug {
		logrus.SetLevel(logrus.DebugLevel)
	}

	if *flHost == "" {
		defaultHost := os.Getenv("DNET_HOST")
		if defaultHost == "" {
			// TODO : Add UDS support
			defaultHost = fmt.Sprintf("tcp://%s:%d", DefaultHTTPHost, DefaultHTTPPort)
		}
		*flHost = defaultHost
	}

	dc, err := newDnetConnection(*flHost)
	if err != nil {
		if *flDaemon {
			logrus.Error(err)
		} else {
			fmt.Fprint(stderr, err)
		}
		return err
	}

	if *flDaemon {
		err := dc.dnetDaemon()
		if err != nil {
			logrus.Errorf("dnet Daemon exited with an error : %v", err)
		}
		return err
	}

	cli := client.NewNetworkCli(stdout, stderr, dc.httpCall)
	if err := cli.Cmd("dnet", flag.Args()...); err != nil {
		fmt.Fprintln(stderr, err)
		return err
	}
	return nil
}
Exemplo n.º 8
0
func main() {
	if h {
		flag.PrintDefaults()
	} else {
		fmt.Printf("s/#hidden/-string: %s\n", str)
		fmt.Printf("b: %t\n", b)
		fmt.Printf("-bool: %t\n", b2)
		fmt.Printf("s/#hidden/-string(via lookup): %s\n", flag.Lookup("s").Value.String())
		fmt.Printf("ARGS: %v\n", flag.Args())
	}
}
Exemplo n.º 9
0
func main() {
	fmt.Print("Hello, world\n")

	// Define global flag here

	// end global flag definition

	flag.Usage = func() {
		fmt.Fprint(os.Stdout, "Usage: docking [OPTIONS] COMMAND [arg...]\n       docking [ --help | -v | --version ]\n\n")
		fmt.Fprint(os.Stdout, "A self-sufficient runtime for containers.\n\nOptions:\n")

		flag.CommandLine.SetOutput(os.Stdout)
		flag.PrintDefaults()

		help := "\nCommands:\n"

		for _, cmd := range dockingCommands {
			help += fmt.Sprintf("    %-10.10s%s\n", cmd.Name, cmd.Description)
		}

		help += "\nRun 'docking COMMAND --help' for more information on a command."
		fmt.Fprintf(os.Stdout, "%s\n", help)
	}
	flag.Parse()

	if *flVersion {
		showVersion()
		return
	}

	if *flHelp {
		// if global flag --help is present, regardless of what other options and commands there are,
		// just print the usage.
		flag.Usage()
		return
	}

	clientCli := client.NewDockingCli(os.Stdin, os.Stdout, os.Stderr, clientFlags)

	c := cli.New(clientCli)
	if err := c.Run(flag.Args()...); err != nil {
		if sterr, ok := err.(cli.StatusError); ok {
			if sterr.Status != "" {
				fmt.Fprintln(os.Stderr, sterr.Status)
				os.Exit(1)
			}
			os.Exit(sterr.StatusCode)
		}
		fmt.Fprintln(os.Stderr, err)
		os.Exit(1)
	}

}
Exemplo n.º 10
0
func (dcli *DockerfCli) CmdContainer(args ...string) error {

	flag.CommandLine.Parse(args)

	if *flVersion {
		showVersion()
		os.Exit(1)
	}

	if *flDaemon {
		if *flHelp {
			flag.Usage()
			os.Exit(1)
		}
		fmt.Printf("dockerf container does not support daemon.\n")
		os.Exit(1)
	}

	if *flMachine == "" {
		app := path.Base(os.Args[0])
		cmd := "container"
		fmt.Printf("%s: \"%s\" requires --machine flag for manage any container. See '%s %s --help'. \n", app, cmd, app, cmd)
		os.Exit(1)
	}

	cluster := ""
	if *flSwarm {
		cluster = "swarm"
	}
	rewriteTLSFlags(dcli, *flMachine, cluster)

	cli := newDockerClient()
	if err := cli.Cmd(flag.Args()...); err != nil {
		if sterr, ok := err.(client.StatusError); ok {
			if sterr.Status != "" {
				fmt.Fprintln(cli.Err(), sterr.Status)
				os.Exit(1)
			}
			os.Exit(sterr.StatusCode)
		}
		fmt.Fprintln(cli.Err(), err)
		os.Exit(1)
	}
	return nil
}
Exemplo n.º 11
0
// doFlags defines the cmdline Usage string and parses flag options.
func doFlags() {
	flag.Usage = func() {
		fmt.Fprintf(os.Stderr, "  Usage: %s [OPTIONS] REGISTRY REPO [REPO...]\n", os.Args[0])
		fmt.Fprintf(os.Stderr, "\n  REGISTRY:\n")
		fmt.Fprintf(os.Stderr, "\tURL of your Docker registry; use index.docker.io for Docker Hub, use local.host to collect images from local Docker host\n")
		fmt.Fprintf(os.Stderr, "\n  REPO:\n")
		fmt.Fprintf(os.Stderr, "\tOne or more repos to gather info about; if no repo is specified Collector will gather info on *all* repos in the Registry\n")
		fmt.Fprintf(os.Stderr, "\n  Environment variables:\n")
		fmt.Fprintf(os.Stderr, "\tCOLLECTOR_DIR:   (Required) Directory that contains the \"data\" folder with Collector default scripts, e.g., $GOPATH/src/github.com/banyanops/collector\n")
		fmt.Fprintf(os.Stderr, "\tCOLLECTOR_ID:    ID provided by Banyan web interface to register Collector with the Banyan service\n")
		fmt.Fprintf(os.Stderr, "\tBANYAN_HOST_DIR: Host directory mounted into Collector/Target containers where results are stored (default: $HOME/.banyan)\n")
		fmt.Fprintf(os.Stderr, "\tBANYAN_DIR:      (Specify only in Dockerfile) Directory in the Collector container where host directory BANYAN_HOST_DIR is mounted\n")
		fmt.Fprintf(os.Stderr, "\tDOCKER_{HOST,CERT_PATH,TLS_VERIFY}: If set, e.g., by docker-machine, then they take precedence over --dockerProto and --dockerAddr\n")
		printExampleUsage()
		fmt.Fprintf(os.Stderr, "  Options:\n")
		flag.PrintDefaults()
	}
	flag.Parse()
	if config.COLLECTORDIR() == "" {
		flag.Usage()
		os.Exit(except.ErrorExitStatus)
	}
	if len(flag.Args()) < 1 {
		flag.Usage()
		os.Exit(except.ErrorExitStatus)
	}
	if *dockerProto != "unix" && *dockerProto != "tcp" {
		flag.Usage()
		os.Exit(except.ErrorExitStatus)
	}
	requiredDirs := []string{config.BANYANDIR(), filepath.Dir(*imageList), filepath.Dir(*repoList), *config.BanyanOutDir, collector.DefaultScriptsDir, collector.UserScriptsDir, collector.BinDir}
	for _, dir := range requiredDirs {
		blog.Debug("Creating directory: " + dir)
		err := fsutil.CreateDirIfNotExist(dir)
		if err != nil {
			except.Fail(err, ": Error in creating a required directory: ", dir)
		}
	}
	collector.RegistrySpec = flag.Arg(0)
	// EqualFold: case insensitive comparison
	if strings.EqualFold(flag.Arg(0), "local.host") {
		collector.LocalHost = true
	}
	//nextMaxImages = *maxImages
}
Exemplo n.º 12
0
func main() {
	flag.Usage = func() {
		fmt.Fprint(os.Stdout, "Usage: gofind [OPTIONS] COMMAND [arg...]\ngofind [ --help | -v | --version ]\n")
		flag.CommandLine.SetOutput(os.Stdout)
		flag.PrintDefaults()
	}
	if h {
		flag.Usage()
	} else {
		fmt.Printf("Path: %s\n", path)
		fmt.Printf("Name: %s\n", name)
		fmt.Printf("ARGS: %v\n", flag.Args())
		err := finder(path, name)
		if err != nil {
			fmt.Println(err)
			return
		}

	}
}
Exemplo n.º 13
0
// TODO: remove once `-d` is retired
func handleGlobalDaemonFlag() {
	// This block makes sure that if the deprecated daemon flag `--daemon` is absent,
	// then all daemon-specific flags are absent as well.
	if !*flDaemon && daemonFlags != nil {
		flag.CommandLine.Visit(func(fl *flag.Flag) {
			for _, name := range fl.Names {
				name := strings.TrimPrefix(name, "#")
				if daemonFlags.Lookup(name) != nil {
					// daemon flag was NOT specified, but daemon-specific flags were
					// so let's error out
					fmt.Fprintf(os.Stderr, "docker: the daemon flag '-%s' must follow the 'docker daemon' command.\n", name)
					os.Exit(1)
				}
			}
		})
	}

	if *flDaemon {
		daemonCli.(*DaemonCli).CmdDaemon(flag.Args()...)
		os.Exit(0)
	}
}
Exemplo n.º 14
0
func main() {
	if reexec.Init() {
		return
	}

	flag.Parse()
	// FIXME: validate daemon flags here

	if *flVersion {
		showVersion()
		return
	}

	if *flLogLevel != "" {
		lvl, err := log.ParseLevel(*flLogLevel)
		if err != nil {
			log.Fatalf("Unable to parse logging level: %s", *flLogLevel)
		}
		initLogging(lvl)
	} else {
		initLogging(log.InfoLevel)
	}

	// -D, --debug, -l/--log-level=debug processing
	// When/if -D is removed this block can be deleted
	if *flDebug {
		os.Setenv("DEBUG", "1")
		initLogging(log.DebugLevel)
	}

	if len(flHosts) == 0 {
		defaultHost := os.Getenv("DOCKER_HOST")
		if defaultHost == "" || *flDaemon {
			// If we do not have a host, default to unix socket
			defaultHost = fmt.Sprintf("unix://%s", api.DEFAULTUNIXSOCKET)
		}
		defaultHost, err := api.ValidateHost(defaultHost)
		if err != nil {
			log.Fatal(err)
		}
		flHosts = append(flHosts, defaultHost)
	}

	setDefaultConfFlag(flTrustKey, defaultTrustKeyFile)

	if *flDaemon {
		mainDaemon()
		return
	}

	if len(flHosts) > 1 {
		log.Fatal("Please specify only one -H")
	}
	protoAddrParts := strings.SplitN(flHosts[0], "://", 2)

	var (
		cli       *client.DockerCli
		tlsConfig tls.Config
	)
	tlsConfig.InsecureSkipVerify = true

	// Regardless of whether the user sets it to true or false, if they
	// specify --tlsverify at all then we need to turn on tls
	if flag.IsSet("-tlsverify") {
		*flTls = true
	}

	// If we should verify the server, we need to load a trusted ca
	if *flTlsVerify {
		certPool := x509.NewCertPool()
		file, err := ioutil.ReadFile(*flCa)
		if err != nil {
			log.Fatalf("Couldn't read ca cert %s: %s", *flCa, err)
		}
		certPool.AppendCertsFromPEM(file)
		tlsConfig.RootCAs = certPool
		tlsConfig.InsecureSkipVerify = false
	}

	// If tls is enabled, try to load and send client certificates
	if *flTls || *flTlsVerify {
		_, errCert := os.Stat(*flCert)
		_, errKey := os.Stat(*flKey)
		if errCert == nil && errKey == nil {
			*flTls = true
			cert, err := tls.LoadX509KeyPair(*flCert, *flKey)
			if err != nil {
				log.Fatalf("Couldn't load X509 key pair: %s. Key encrypted?", err)
			}
			tlsConfig.Certificates = []tls.Certificate{cert}
		}
		// Avoid fallback to SSL protocols < TLS1.0
		tlsConfig.MinVersion = tls.VersionTLS10
	}

	if *flTls || *flTlsVerify {
		cli = client.NewDockerCli(os.Stdin, os.Stdout, os.Stderr, *flTrustKey, protoAddrParts[0], protoAddrParts[1], &tlsConfig)
	} else {
		cli = client.NewDockerCli(os.Stdin, os.Stdout, os.Stderr, *flTrustKey, protoAddrParts[0], protoAddrParts[1], nil)
	}

	if err := cli.Cmd(flag.Args()...); err != nil {
		if sterr, ok := err.(*utils.StatusError); ok {
			if sterr.Status != "" {
				log.Println(sterr.Status)
			}
			os.Exit(sterr.StatusCode)
		}
		log.Fatal(err)
	}
}
Exemplo n.º 15
0
func main() {
	procs := runtime.NumCPU()
	// packet sniffing can block an OS thread, so we need one thread
	// for that plus at least one more.
	if procs < 2 {
		procs = 2
	}
	runtime.GOMAXPROCS(procs)

	var (
		config                    weave.Config
		justVersion               bool
		protocolMinVersion        int
		ifaceName                 string
		routerName                string
		nickName                  string
		password                  string
		pktdebug                  bool
		logLevel                  string
		prof                      string
		bufSzMB                   int
		noDiscovery               bool
		httpAddr                  string
		iprangeCIDR               string
		ipsubnetCIDR              string
		peerCount                 int
		dockerAPI                 string
		peers                     []string
		noDNS                     bool
		dnsDomain                 string
		dnsListenAddress          string
		dnsTTL                    int
		dnsClientTimeout          time.Duration
		dnsEffectiveListenAddress string
		iface                     *net.Interface
	)

	mflag.BoolVar(&justVersion, []string{"#version", "-version"}, false, "print version and exit")
	mflag.IntVar(&config.Port, []string{"#port", "-port"}, weave.Port, "router port")
	mflag.IntVar(&protocolMinVersion, []string{"-min-protocol-version"}, weave.ProtocolMinVersion, "minimum weave protocol version")
	mflag.StringVar(&ifaceName, []string{"#iface", "-iface"}, "", "name of interface to capture/inject from (disabled if blank)")
	mflag.StringVar(&routerName, []string{"#name", "-name"}, "", "name of router (defaults to MAC of interface)")
	mflag.StringVar(&nickName, []string{"#nickname", "-nickname"}, "", "nickname of peer (defaults to hostname)")
	mflag.StringVar(&password, []string{"#password", "-password"}, "", "network password")
	mflag.StringVar(&logLevel, []string{"-log-level"}, "info", "logging level (debug, info, warning, error)")
	mflag.BoolVar(&pktdebug, []string{"#pktdebug", "#-pktdebug", "-pkt-debug"}, false, "enable per-packet debug logging")
	mflag.StringVar(&prof, []string{"#profile", "-profile"}, "", "enable profiling and write profiles to given path")
	mflag.IntVar(&config.ConnLimit, []string{"#connlimit", "#-connlimit", "-conn-limit"}, 30, "connection limit (0 for unlimited)")
	mflag.BoolVar(&noDiscovery, []string{"#nodiscovery", "#-nodiscovery", "-no-discovery"}, false, "disable peer discovery")
	mflag.IntVar(&bufSzMB, []string{"#bufsz", "-bufsz"}, 8, "capture buffer size in MB")
	mflag.StringVar(&httpAddr, []string{"#httpaddr", "#-httpaddr", "-http-addr"}, fmt.Sprintf(":%d", weave.HTTPPort), "address to bind HTTP interface to (disabled if blank, absolute path indicates unix domain socket)")
	mflag.StringVar(&iprangeCIDR, []string{"#iprange", "#-iprange", "-ipalloc-range"}, "", "IP address range reserved for automatic allocation, in CIDR notation")
	mflag.StringVar(&ipsubnetCIDR, []string{"#ipsubnet", "#-ipsubnet", "-ipalloc-default-subnet"}, "", "subnet to allocate within by default, in CIDR notation")
	mflag.IntVar(&peerCount, []string{"#initpeercount", "#-initpeercount", "-init-peer-count"}, 0, "number of peers in network (for IP address allocation)")
	mflag.StringVar(&dockerAPI, []string{"#api", "#-api", "-docker-api"}, "", "Docker API endpoint, e.g. unix:///var/run/docker.sock")
	mflag.BoolVar(&noDNS, []string{"-no-dns"}, false, "disable DNS server")
	mflag.StringVar(&dnsDomain, []string{"-dns-domain"}, nameserver.DefaultDomain, "local domain to server requests for")
	mflag.StringVar(&dnsListenAddress, []string{"-dns-listen-address"}, nameserver.DefaultListenAddress, "address to listen on for DNS requests")
	mflag.IntVar(&dnsTTL, []string{"-dns-ttl"}, nameserver.DefaultTTL, "TTL for DNS request from our domain")
	mflag.DurationVar(&dnsClientTimeout, []string{"-dns-fallback-timeout"}, nameserver.DefaultClientTimeout, "timeout for fallback DNS requests")
	mflag.StringVar(&dnsEffectiveListenAddress, []string{"-dns-effective-listen-address"}, "", "address DNS will actually be listening, after Docker port mapping")

	// crude way of detecting that we probably have been started in a
	// container, with `weave launch` --> suppress misleading paths in
	// mflags error messages.
	if os.Args[0] == "/home/weave/weaver" { // matches the Dockerfile ENTRYPOINT
		os.Args[0] = "weave"
		mflag.CommandLine.Init("weave", mflag.ExitOnError)
	}
	mflag.Parse()

	peers = mflag.Args()

	SetLogLevel(logLevel)
	if justVersion {
		fmt.Printf("weave router %s\n", version)
		os.Exit(0)
	}

	Log.Println("Command line options:", options())
	Log.Println("Command line peers:", peers)

	if protocolMinVersion < weave.ProtocolMinVersion || protocolMinVersion > weave.ProtocolMaxVersion {
		Log.Fatalf("--min-protocol-version must be in range [%d,%d]", weave.ProtocolMinVersion, weave.ProtocolMaxVersion)
	}
	config.ProtocolMinVersion = byte(protocolMinVersion)

	var err error

	if ifaceName != "" {
		iface, err := weavenet.EnsureInterface(ifaceName)
		if err != nil {
			Log.Fatal(err)
		}

		// bufsz flag is in MB
		config.Bridge, err = weave.NewPcap(iface, bufSzMB*1024*1024)
		if err != nil {
			Log.Fatal(err)
		}
	}

	if routerName == "" {
		if iface == nil {
			Log.Fatal("Either an interface must be specified with --iface or a name with -name")
		}
		routerName = iface.HardwareAddr.String()
	}

	name, err := weave.PeerNameFromUserInput(routerName)
	if err != nil {
		Log.Fatal(err)
	}

	if nickName == "" {
		nickName, err = os.Hostname()
		if err != nil {
			Log.Fatal(err)
		}
	}

	if password == "" {
		password = os.Getenv("WEAVE_PASSWORD")
	}
	if password == "" {
		Log.Println("Communication between peers is unencrypted.")
	} else {
		config.Password = []byte(password)
		Log.Println("Communication between peers is encrypted.")
	}

	if prof != "" {
		p := *profile.CPUProfile
		p.ProfilePath = prof
		p.NoShutdownHook = true
		defer profile.Start(&p).Stop()
	}

	config.PeerDiscovery = !noDiscovery
	config.Overlay = weave.NewSleeveOverlay(config.Port)

	if pktdebug {
		config.PacketLogging = packetLogging{}
	} else {
		config.PacketLogging = nopPacketLogging{}
	}

	router := weave.NewRouter(config, name, nickName)
	Log.Println("Our name is", router.Ourself)

	var dockerCli *docker.Client
	if dockerAPI != "" {
		dc, err := docker.NewClient(dockerAPI)
		if err != nil {
			Log.Fatal("Unable to start docker client: ", err)
		}
		dockerCli = dc
	}
	observeContainers := func(o docker.ContainerObserver) {
		if dockerCli != nil {
			if err = dockerCli.AddObserver(o); err != nil {
				Log.Fatal("Unable to start watcher", err)
			}
		}
	}
	var allocator *ipam.Allocator
	var defaultSubnet address.CIDR
	if iprangeCIDR != "" {
		allocator, defaultSubnet = createAllocator(router, iprangeCIDR, ipsubnetCIDR, determineQuorum(peerCount, peers))
		observeContainers(allocator)
	} else if peerCount > 0 {
		Log.Fatal("--init-peer-count flag specified without --ipalloc-range")
	}

	var (
		ns        *nameserver.Nameserver
		dnsserver *nameserver.DNSServer
	)
	if !noDNS {
		ns = nameserver.New(router.Ourself.Peer.Name, router.Peers, dnsDomain)
		ns.SetGossip(router.NewGossip("nameserver", ns))
		observeContainers(ns)
		ns.Start()
		defer ns.Stop()
		dnsserver, err = nameserver.NewDNSServer(ns, dnsDomain, dnsListenAddress,
			dnsEffectiveListenAddress, uint32(dnsTTL), dnsClientTimeout)
		if err != nil {
			Log.Fatal("Unable to start dns server: ", err)
		}
		dnsserver.ActivateAndServe()
		defer dnsserver.Stop()
	}

	router.Start()
	if errors := router.ConnectionMaker.InitiateConnections(peers, false); len(errors) > 0 {
		Log.Fatal(ErrorMessages(errors))
	}

	// The weave script always waits for a status call to succeed,
	// so there is no point in doing "weave launch --http-addr ''".
	// This is here to support stand-alone use of weaver.
	if httpAddr != "" {
		muxRouter := mux.NewRouter()
		if allocator != nil {
			allocator.HandleHTTP(muxRouter, defaultSubnet, dockerCli)
		}
		if ns != nil {
			ns.HandleHTTP(muxRouter, dockerCli)
		}
		router.HandleHTTP(muxRouter)
		HandleHTTP(muxRouter, version, router, allocator, defaultSubnet, ns, dnsserver)
		http.Handle("/", muxRouter)
		go listenAndServeHTTP(httpAddr, muxRouter)
	}

	SignalHandlerLoop(router)
}
Exemplo n.º 16
0
func main() {
	if len(dockerConfDir) == 0 {
		dockerConfDir = filepath.Join(os.Getenv("HOME"), ".docker")
	}
	if selfPath := utils.SelfPath(); strings.Contains(selfPath, ".dockerinit") {
		// Running in init mode
		sysinit.SysInit()
		return
	}

	var (
		flVersion            = flag.Bool([]string{"v", "-version"}, false, "Print version information and quit")
		flDaemon             = flag.Bool([]string{"d", "-daemon"}, false, "Enable daemon mode")
		flGraphOpts          opts.ListOpts
		flDebug              = flag.Bool([]string{"D", "-debug"}, false, "Enable debug mode")
		flAutoRestart        = flag.Bool([]string{"r", "-restart"}, true, "Restart previously running containers")
		bridgeName           = flag.String([]string{"b", "-bridge"}, "", "Attach containers to a pre-existing network bridge\nuse 'none' to disable container networking")
		bridgeIp             = flag.String([]string{"#bip", "-bip"}, "", "Use this CIDR notation address for the network bridge's IP, not compatible with -b")
		pidfile              = flag.String([]string{"p", "-pidfile"}, "/var/run/docker.pid", "Path to use for daemon PID file")
		flRoot               = flag.String([]string{"g", "-graph"}, "/var/lib/docker", "Path to use as the root of the Docker runtime")
		flSocketGroup        = flag.String([]string{"G", "-group"}, "docker", "Group to assign the unix socket specified by -H when running in daemon mode\nuse '' (the empty string) to disable setting of a group")
		flEnableCors         = flag.Bool([]string{"#api-enable-cors", "-api-enable-cors"}, false, "Enable CORS headers in the remote API")
		flDns                = opts.NewListOpts(opts.ValidateIPAddress)
		flDnsSearch          = opts.NewListOpts(opts.ValidateDnsSearch)
		flEnableIptables     = flag.Bool([]string{"#iptables", "-iptables"}, true, "Enable Docker's addition of iptables rules")
		flEnableIpForward    = flag.Bool([]string{"#ip-forward", "-ip-forward"}, true, "Enable net.ipv4.ip_forward")
		flDefaultIp          = flag.String([]string{"#ip", "-ip"}, "0.0.0.0", "Default IP address to use when binding container ports")
		flInterContainerComm = flag.Bool([]string{"#icc", "-icc"}, true, "Enable inter-container communication")
		flGraphDriver        = flag.String([]string{"s", "-storage-driver"}, "", "Force the Docker runtime to use a specific storage driver")
		flExecDriver         = flag.String([]string{"e", "-exec-driver"}, "native", "Force the Docker runtime to use a specific exec driver")
		flHosts              = opts.NewListOpts(api.ValidateHost)
		flMtu                = flag.Int([]string{"#mtu", "-mtu"}, 0, "Set the containers network MTU\nif no value is provided: default to the default route MTU or 1500 if no default route is available")
		flTls                = flag.Bool([]string{"-tls"}, false, "Use TLS; implied by tls-verify flags")
		flTlsVerify          = flag.Bool([]string{"-tlsverify"}, false, "Use TLS and verify the remote (daemon: verify client, client: verify daemon)")
		flCa                 = flag.String([]string{"-tlscacert"}, filepath.Join(dockerConfDir, defaultCaFile), "Trust only remotes providing a certificate signed by the CA given here")
		flCert               = flag.String([]string{"-tlscert"}, filepath.Join(dockerConfDir, defaultCertFile), "Path to TLS certificate file")
		flKey                = flag.String([]string{"-tlskey"}, filepath.Join(dockerConfDir, defaultKeyFile), "Path to TLS key file")
		flSelinuxEnabled     = flag.Bool([]string{"-selinux-enabled"}, false, "Enable selinux support. SELinux does not presently support the BTRFS storage driver")
	)
	flag.Var(&flDns, []string{"#dns", "-dns"}, "Force Docker to use specific DNS servers")
	flag.Var(&flDnsSearch, []string{"-dns-search"}, "Force Docker to use specific DNS search domains")
	flag.Var(&flHosts, []string{"H", "-host"}, "The socket(s) to bind to in daemon mode\nspecified using one or more tcp://host:port, unix:///path/to/socket, fd://* or fd://socketfd.")
	flag.Var(&flGraphOpts, []string{"-storage-opt"}, "Set storage driver options")

	flag.Parse()

	if *flVersion {
		showVersion()
		return
	}
	if flHosts.Len() == 0 {
		defaultHost := os.Getenv("DOCKER_HOST")

		if defaultHost == "" || *flDaemon {
			// If we do not have a host, default to unix socket
			defaultHost = fmt.Sprintf("unix://%s", api.DEFAULTUNIXSOCKET)
		}
		if _, err := api.ValidateHost(defaultHost); err != nil {
			log.Fatal(err)
		}
		flHosts.Set(defaultHost)
	}

	if *bridgeName != "" && *bridgeIp != "" {
		log.Fatal("You specified -b & --bip, mutually exclusive options. Please specify only one.")
	}

	if !*flEnableIptables && !*flInterContainerComm {
		log.Fatal("You specified --iptables=false with --icc=false. ICC uses iptables to function. Please set --icc or --iptables to true.")
	}

	if net.ParseIP(*flDefaultIp) == nil {
		log.Fatalf("Specified --ip=%s is not in correct format \"0.0.0.0\".", *flDefaultIp)
	}

	if *flDebug {
		os.Setenv("DEBUG", "1")
	}

	if *flDaemon {
		if runtime.GOOS != "linux" {
			log.Fatalf("The Docker daemon is only supported on linux")
		}
		if os.Geteuid() != 0 {
			log.Fatalf("The Docker daemon needs to be run as root")
		}

		if flag.NArg() != 0 {
			flag.Usage()
			return
		}

		// set up the TempDir to use a canonical path
		tmp := os.TempDir()
		realTmp, err := utils.ReadSymlinkedDirectory(tmp)
		if err != nil {
			log.Fatalf("Unable to get the full path to the TempDir (%s): %s", tmp, err)
		}
		os.Setenv("TMPDIR", realTmp)

		// get the canonical path to the Docker root directory
		root := *flRoot
		var realRoot string
		if _, err := os.Stat(root); err != nil && os.IsNotExist(err) {
			realRoot = root
		} else {
			realRoot, err = utils.ReadSymlinkedDirectory(root)
			if err != nil {
				log.Fatalf("Unable to get the full path to root (%s): %s", root, err)
			}
		}
		if err := checkKernelAndArch(); err != nil {
			log.Fatal(err)
		}

		eng := engine.New()
		// Load builtins
		if err := builtins.Register(eng); err != nil {
			log.Fatal(err)
		}

		// handle the pidfile early. https://github.com/docker/docker/issues/6973
		if len(*pidfile) > 0 {
			job := eng.Job("initserverpidfile", *pidfile)
			if err := job.Run(); err != nil {
				log.Fatal(err)
			}
		}

		// load the daemon in the background so we can immediately start
		// the http api so that connections don't fail while the daemon
		// is booting
		go func() {
			// Load plugin: httpapi
			job := eng.Job("initserver")
			// include the variable here too, for the server config
			job.Setenv("Pidfile", *pidfile)
			job.Setenv("Root", realRoot)
			job.SetenvBool("AutoRestart", *flAutoRestart)
			job.SetenvList("Dns", flDns.GetAll())
			job.SetenvList("DnsSearch", flDnsSearch.GetAll())
			job.SetenvBool("EnableIptables", *flEnableIptables)
			job.SetenvBool("EnableIpForward", *flEnableIpForward)
			job.Setenv("BridgeIface", *bridgeName)
			job.Setenv("BridgeIP", *bridgeIp)
			job.Setenv("DefaultIp", *flDefaultIp)
			job.SetenvBool("InterContainerCommunication", *flInterContainerComm)
			job.Setenv("GraphDriver", *flGraphDriver)
			job.SetenvList("GraphOptions", flGraphOpts.GetAll())
			job.Setenv("ExecDriver", *flExecDriver)
			job.SetenvInt("Mtu", *flMtu)
			job.SetenvBool("EnableSelinuxSupport", *flSelinuxEnabled)
			job.SetenvList("Sockets", flHosts.GetAll())
			if err := job.Run(); err != nil {
				log.Fatal(err)
			}
			// after the daemon is done setting up we can tell the api to start
			// accepting connections
			if err := eng.Job("acceptconnections").Run(); err != nil {
				log.Fatal(err)
			}
		}()

		// TODO actually have a resolved graphdriver to show?
		log.Printf("docker daemon: %s %s; execdriver: %s; graphdriver: %s",
			dockerversion.VERSION,
			dockerversion.GITCOMMIT,
			*flExecDriver,
			*flGraphDriver)

		// Serve api
		job := eng.Job("serveapi", flHosts.GetAll()...)
		job.SetenvBool("Logging", true)
		job.SetenvBool("EnableCors", *flEnableCors)
		job.Setenv("Version", dockerversion.VERSION)
		job.Setenv("SocketGroup", *flSocketGroup)

		job.SetenvBool("Tls", *flTls)
		job.SetenvBool("TlsVerify", *flTlsVerify)
		job.Setenv("TlsCa", *flCa)
		job.Setenv("TlsCert", *flCert)
		job.Setenv("TlsKey", *flKey)
		job.SetenvBool("BufferRequests", true)
		if err := job.Run(); err != nil {
			log.Fatal(err)
		}
	} else {
		if flHosts.Len() > 1 {
			log.Fatal("Please specify only one -H")
		}
		protoAddrParts := strings.SplitN(flHosts.GetAll()[0], "://", 2)

		var (
			cli       *client.DockerCli
			tlsConfig tls.Config
		)
		tlsConfig.InsecureSkipVerify = true

		// If we should verify the server, we need to load a trusted ca
		if *flTlsVerify {
			*flTls = true
			certPool := x509.NewCertPool()
			file, err := ioutil.ReadFile(*flCa)
			if err != nil {
				log.Fatalf("Couldn't read ca cert %s: %s", *flCa, err)
			}
			certPool.AppendCertsFromPEM(file)
			tlsConfig.RootCAs = certPool
			tlsConfig.InsecureSkipVerify = false
		}

		// If tls is enabled, try to load and send client certificates
		if *flTls || *flTlsVerify {
			_, errCert := os.Stat(*flCert)
			_, errKey := os.Stat(*flKey)
			if errCert == nil && errKey == nil {
				*flTls = true
				cert, err := tls.LoadX509KeyPair(*flCert, *flKey)
				if err != nil {
					log.Fatalf("Couldn't load X509 key pair: %s. Key encrypted?", err)
				}
				tlsConfig.Certificates = []tls.Certificate{cert}
			}
		}

		if *flTls || *flTlsVerify {
			cli = client.NewDockerCli(os.Stdin, os.Stdout, os.Stderr, protoAddrParts[0], protoAddrParts[1], &tlsConfig)
		} else {
			cli = client.NewDockerCli(os.Stdin, os.Stdout, os.Stderr, protoAddrParts[0], protoAddrParts[1], nil)
		}

		if err := cli.ParseCommands(flag.Args()...); err != nil {
			if sterr, ok := err.(*utils.StatusError); ok {
				if sterr.Status != "" {
					log.Println(sterr.Status)
				}
				os.Exit(sterr.StatusCode)
			}
			log.Fatal(err)
		}
	}
}
Exemplo n.º 17
0
func main() {
	flag.Usage = func() {
		flag.PrintDefaults()
	}
	flag.Parse()
	if debug {
		os.Setenv("DEBUG", "1")
		logrus.SetLevel(logrus.DebugLevel)
	}
	if flag.NArg() == 0 {
		flag.Usage()
		logrus.Fatal("no image names provided")
	}

	// make temporary working directory
	tempFetchRoot, err := ioutil.TempDir("", "docker-fetch-")
	if err != nil {
		logrus.Fatal(err)
	}

	refs := []*fetch.ImageRef{}
	for _, arg := range flag.Args() {
		ref := fetch.NewImageRef(arg)
		fmt.Fprintf(os.Stderr, "Pulling %s\n", ref)
		r := fetch.NewRegistry(ref.Host())

		layersFetched, err := r.FetchLayers(ref, tempFetchRoot)
		if err != nil {
			logrus.Errorf("failed pulling %s, skipping: %s", ref, err)
			continue
		}
		logrus.Debugf("fetched %d layers for %s", len(layersFetched), ref)
		refs = append(refs, ref)
	}

	// marshal the "repositories" file for writing out
	buf, err := fetch.FormatRepositories(refs...)
	if err != nil {
		logrus.Fatal(err)
	}
	fh, err := os.Create(filepath.Join(tempFetchRoot, "repositories"))
	if err != nil {
		logrus.Fatal(err)
	}
	if _, err = fh.Write(buf); err != nil {
		logrus.Fatal(err)
	}
	fh.Close()
	logrus.Debugf("%s", fh.Name())

	var output io.WriteCloser
	if outputStream == "-" {
		output = os.Stdout
	} else {
		output, err = os.Create(outputStream)
		if err != nil {
			logrus.Fatal(err)
		}
	}
	defer output.Close()

	if err = os.Chdir(tempFetchRoot); err != nil {
		logrus.Fatal(err)
	}
	tarStream, err := archive.Tar(".", archive.Uncompressed)
	if err != nil {
		logrus.Fatal(err)
	}
	if _, err = io.Copy(output, tarStream); err != nil {
		logrus.Fatal(err)
	}
}
Exemplo n.º 18
0
func main() {
	configuration := config.LoadConfigurationFile()

	flag.Parse()

	if *flVersion {
		showVersion()
		return
	}

	if *flDebug {
		os.Setenv("DEBUG", "1")
	}

	if flHosts.Len() == 0 {
		defaultHost := os.Getenv("DOCKER_HOST")

		if os.Getenv("KRANE_HOST") != "" {
			defaultHost = os.Getenv("KRANE_HOST")
		}

		if unsafe.Sizeof(configuration) > 0 {
			defaultHost = fmt.Sprintf("%s:%d", configuration.Production.Server.Host.Fqdn, configuration.Production.Server.Host.Port)
		} else if defaultHost == "" || *flDaemon {
			// If we do not have a host, default to unix socket
			defaultHost = fmt.Sprintf("unix://%s", api.DEFAULTUNIXSOCKET)
		}
		if _, err := api.ValidateHost(defaultHost); err != nil {
			log.Fatal(err)
		}
		flHosts.Set(defaultHost)
	}

	if *flDaemon {

		if configuration.Production.Server.Driver == "concerto" {
			configuration.Driver = concerto.NewDriver()
		} else if configuration.Production.Server.Driver == "aws" {
			configuration.Driver = aws.NewDriver()
		}

		engine.InitializeDockerEngine(configuration)
		return
	}

	if flHosts.Len() > 1 {
		log.Fatal("Please specify only one -H")
	}

	protoAddrParts := strings.SplitN(flHosts.GetAll()[0], "://", 2)

	var (
		cli *client.KraneCli
	)

	cli = client.NewKraneCli(os.Stdin, os.Stdout, os.Stderr, nil, protoAddrParts[0], protoAddrParts[1], nil)

	if err := cli.Cmd(flag.Args()...); err != nil {
		if sterr, ok := err.(*utils.StatusError); ok {
			if sterr.Status != "" {
				log.Println(sterr.Status)
			}
			os.Exit(sterr.StatusCode)
		}
		log.Fatal(err)
	}

}
Exemplo n.º 19
0
func main() {
	// Set terminal emulation based on platform as required.
	stdin, stdout, stderr := term.StdStreams()

	logrus.SetOutput(stderr)

	flag.Merge(flag.CommandLine, clientFlags.FlagSet, commonFlags.FlagSet)

	cobraAdaptor := cobraadaptor.NewCobraAdaptor(clientFlags)

	flag.Usage = func() {
		fmt.Fprint(stdout, "Usage: docker [OPTIONS] COMMAND [arg...]\n       docker [ --help | -v | --version ]\n\n")
		fmt.Fprint(stdout, "A self-sufficient runtime for containers.\n\nOptions:\n")

		flag.CommandLine.SetOutput(stdout)
		flag.PrintDefaults()

		help := "\nCommands:\n"

		dockerCommands := append(cli.DockerCommandUsage, cobraAdaptor.Usage()...)
		for _, cmd := range sortCommands(dockerCommands) {
			help += fmt.Sprintf("    %-10.10s%s\n", cmd.Name, cmd.Description)
		}

		help += "\nRun 'docker COMMAND --help' for more information on a command."
		fmt.Fprintf(stdout, "%s\n", help)
	}

	flag.Parse()

	if *flVersion {
		showVersion()
		return
	}

	if *flHelp {
		// if global flag --help is present, regardless of what other options and commands there are,
		// just print the usage.
		flag.Usage()
		return
	}

	clientCli := client.NewDockerCli(stdin, stdout, stderr, clientFlags)

	c := cli.New(clientCli, NewDaemonProxy(), cobraAdaptor)
	if err := c.Run(flag.Args()...); err != nil {
		if sterr, ok := err.(cli.StatusError); ok {
			if sterr.Status != "" {
				fmt.Fprintln(stderr, sterr.Status)
			}
			// StatusError should only be used for errors, and all errors should
			// have a non-zero exit status, so never exit with 0
			if sterr.StatusCode == 0 {
				os.Exit(1)
			}
			os.Exit(sterr.StatusCode)
		}
		fmt.Fprintln(stderr, err)
		os.Exit(1)
	}
}
Exemplo n.º 20
0
// TODO rewrite this whole PoC
func main() {
	flag.Usage = func() {
		flag.PrintDefaults()
	}
	flag.Parse()
	if debug {
		os.Setenv("DEBUG", "1")
		log.SetLevel(log.DebugLevel)
	}
	if flag.NArg() == 0 {
		fmt.Println("ERROR: no image names provided")
		flag.Usage()
		os.Exit(1)
	}

	// make tempDir
	tempDir, err := ioutil.TempDir("", "docker-fetch-")
	if err != nil {
		fmt.Fprintln(os.Stderr, err)
		os.Exit(1)
	}
	defer os.RemoveAll(tempDir)

	fetcher := NewFetcher(tempDir)
	sc := registry.NewServiceConfig(rOptions)

	for _, arg := range flag.Args() {
		remote, tagName := parsers.ParseRepositoryTag(arg)
		if tagName == "" {
			tagName = "latest"
		}

		repInfo, err := sc.NewRepositoryInfo(remote)
		if err != nil {
			fmt.Fprintln(os.Stderr, err)
			os.Exit(1)
		}
		log.Debugf("%#v %q\n", repInfo, tagName)

		idx, err := repInfo.GetEndpoint()
		if err != nil {
			fmt.Fprintln(os.Stderr, err)
			os.Exit(1)
		}
		fmt.Fprintf(os.Stderr, "Pulling %s:%s from %s\n", repInfo.RemoteName, tagName, idx)

		var session *registry.Session
		if s, ok := fetcher.sessions[idx.String()]; ok {
			session = s
		} else {
			// TODO(vbatts) obviously the auth and http factory shouldn't be nil here
			session, err = registry.NewSession(nil, nil, idx, timeout)
			if err != nil {
				fmt.Fprintln(os.Stderr, err)
				os.Exit(1)
			}
		}

		rd, err := session.GetRepositoryData(repInfo.RemoteName)
		if err != nil {
			fmt.Fprintln(os.Stderr, err)
			os.Exit(1)
		}
		log.Debugf("rd: %#v", rd)

		// produce the "repositories" file for the archive
		if _, ok := fetcher.repositories[repInfo.RemoteName]; !ok {
			fetcher.repositories[repInfo.RemoteName] = graph.Repository{}
		}
		log.Debugf("repositories: %#v", fetcher.repositories)

		if len(rd.Endpoints) == 0 {
			log.Fatalf("expected registry endpoints, but received none from the index")
		}

		tags, err := session.GetRemoteTags(rd.Endpoints, repInfo.RemoteName, rd.Tokens)
		if err != nil {
			fmt.Fprintln(os.Stderr, err)
			os.Exit(1)
		}
		if hash, ok := tags[tagName]; ok {
			fetcher.repositories[repInfo.RemoteName][tagName] = hash
		}
		log.Debugf("repositories: %#v", fetcher.repositories)

		imgList, err := session.GetRemoteHistory(fetcher.repositories[repInfo.RemoteName][tagName], rd.Endpoints[0], rd.Tokens)
		if err != nil {
			fmt.Fprintln(os.Stderr, err)
			os.Exit(1)
		}
		log.Debugf("imgList: %#v", imgList)

		for _, imgID := range imgList {
			// pull layers and jsons
			buf, _, err := session.GetRemoteImageJSON(imgID, rd.Endpoints[0], rd.Tokens)
			if err != nil {
				fmt.Fprintln(os.Stderr, err)
				os.Exit(1)
			}
			if err = os.MkdirAll(filepath.Join(fetcher.Root, imgID), 0755); err != nil {
				fmt.Fprintln(os.Stderr, err)
				os.Exit(1)
			}
			fh, err := os.Create(filepath.Join(fetcher.Root, imgID, "json"))
			if err != nil {
				fmt.Fprintln(os.Stderr, err)
				os.Exit(1)
			}
			if _, err = fh.Write(buf); err != nil {
				fmt.Fprintln(os.Stderr, err)
				os.Exit(1)
			}
			fh.Close()
			log.Debugf("%s", fh.Name())

			tarRdr, err := session.GetRemoteImageLayer(imgID, rd.Endpoints[0], rd.Tokens, 0)
			if err != nil {
				fmt.Fprintln(os.Stderr, err)
				os.Exit(1)
			}
			fh, err = os.Create(filepath.Join(fetcher.Root, imgID, "layer.tar"))
			if err != nil {
				fmt.Fprintln(os.Stderr, err)
				os.Exit(1)
			}
			// the body is usually compressed
			gzRdr, err := gzip.NewReader(tarRdr)
			if err != nil {
				log.Debugf("image layer for %q is not gzipped", imgID)
				// the archive may not be gzipped, so just copy the stream
				if _, err = io.Copy(fh, tarRdr); err != nil {
					fmt.Fprintln(os.Stderr, err)
					os.Exit(1)
				}
			} else {
				// no error, so gzip decompress the stream
				if _, err = io.Copy(fh, gzRdr); err != nil {
					fmt.Fprintln(os.Stderr, err)
					os.Exit(1)
				}
				if err = gzRdr.Close(); err != nil {
					fmt.Fprintln(os.Stderr, err)
					os.Exit(1)
				}
			}
			if err = tarRdr.Close(); err != nil {
				fmt.Fprintln(os.Stderr, err)
				os.Exit(1)
			}
			if err = fh.Close(); err != nil {
				fmt.Fprintln(os.Stderr, err)
				os.Exit(1)
			}
			log.Debugf("%s", fh.Name())
		}
	}

	// marshal the "repositories" file for writing out
	log.Debugf("repositories: %q", fetcher.repositories)
	buf, err := json.Marshal(fetcher.repositories)
	if err != nil {
		fmt.Fprintln(os.Stderr, err)
		os.Exit(1)
	}
	fh, err := os.Create(filepath.Join(fetcher.Root, "repositories"))
	if err != nil {
		fmt.Fprintln(os.Stderr, err)
		os.Exit(1)
	}
	if _, err = fh.Write(buf); err != nil {
		fmt.Fprintln(os.Stderr, err)
		os.Exit(1)
	}
	fh.Close()
	log.Debugf("%s", fh.Name())

	var output io.WriteCloser
	if outputStream == "-" {
		output = os.Stdout
	} else {
		output, err = os.Create(outputStream)
		if err != nil {
			fmt.Fprintln(os.Stderr, err)
			os.Exit(1)
		}
	}
	defer output.Close()

	if err = os.Chdir(fetcher.Root); err != nil {
		fmt.Fprintln(os.Stderr, err)
		os.Exit(1)
	}
	tarStream, err := archive.Tar(".", archive.Uncompressed)
	if err != nil {
		fmt.Fprintln(os.Stderr, err)
		os.Exit(1)
	}
	if _, err = io.Copy(output, tarStream); err != nil {
		fmt.Fprintln(os.Stderr, err)
		os.Exit(1)
	}
}
Exemplo n.º 21
0
func main() {
	if reexec.Init() {
		return
	}

	// Set terminal emulation based on platform as required.
	stdin, stdout, stderr := term.StdStreams()

	initLogging(stderr)

	flag.Parse()
	// FIXME: validate daemon flags here

	if *flVersion {
		showVersion()
		return
	}

	if *flLogLevel != "" {
		lvl, err := logrus.ParseLevel(*flLogLevel)
		if err != nil {
			fmt.Fprintf(os.Stderr, "Unable to parse logging level: %s\n", *flLogLevel)
			os.Exit(1)
		}
		setLogLevel(lvl)
	} else {
		setLogLevel(logrus.InfoLevel)
	}

	if *flDebug {
		os.Setenv("DEBUG", "1")
		setLogLevel(logrus.DebugLevel)
	}

	if len(flHosts) == 0 {
		defaultHost := os.Getenv("DOCKER_HOST")
		if defaultHost == "" || *flDaemon {
			if runtime.GOOS != "windows" {
				// If we do not have a host, default to unix socket
				defaultHost = fmt.Sprintf("unix://%s", opts.DefaultUnixSocket)
			} else {
				// If we do not have a host, default to TCP socket on Windows
				defaultHost = fmt.Sprintf("tcp://%s:%d", opts.DefaultHTTPHost, opts.DefaultHTTPPort)
			}
		}
		defaultHost, err := opts.ValidateHost(defaultHost)
		if err != nil {
			if *flDaemon {
				logrus.Fatal(err)
			} else {
				fmt.Fprint(os.Stderr, err)
			}
			os.Exit(1)
		}
		flHosts = append(flHosts, defaultHost)
	}

	setDefaultConfFlag(flTrustKey, defaultTrustKeyFile)

	if *flDaemon {
		if *flHelp {
			flag.Usage()
			return
		}
		mainDaemon()
		return
	}

	if len(flHosts) > 1 {
		fmt.Fprintf(os.Stderr, "Please specify only one -H")
		os.Exit(0)
	}
	protoAddrParts := strings.SplitN(flHosts[0], "://", 2)

	var (
		cli       *client.DockerCli
		tlsConfig tls.Config
	)
	tlsConfig.InsecureSkipVerify = true

	// Regardless of whether the user sets it to true or false, if they
	// specify --tlsverify at all then we need to turn on tls
	if flag.IsSet("-tlsverify") {
		*flTls = true
	}

	// If we should verify the server, we need to load a trusted ca
	if *flTlsVerify {
		certPool := x509.NewCertPool()
		file, err := ioutil.ReadFile(*flCa)
		if err != nil {
			fmt.Fprintf(os.Stderr, "Couldn't read ca cert %s: %s\n", *flCa, err)
			os.Exit(1)
		}
		certPool.AppendCertsFromPEM(file)
		tlsConfig.RootCAs = certPool
		tlsConfig.InsecureSkipVerify = false
	}

	// If tls is enabled, try to load and send client certificates
	if *flTls || *flTlsVerify {
		_, errCert := os.Stat(*flCert)
		_, errKey := os.Stat(*flKey)
		if errCert == nil && errKey == nil {
			*flTls = true
			cert, err := tls.LoadX509KeyPair(*flCert, *flKey)
			if err != nil {
				fmt.Fprintf(os.Stderr, "Couldn't load X509 key pair: %q. Make sure the key is encrypted\n", err)
				os.Exit(1)
			}
			tlsConfig.Certificates = []tls.Certificate{cert}
		}
		// Avoid fallback to SSL protocols < TLS1.0
		tlsConfig.MinVersion = tls.VersionTLS10
	}

	if *flTls || *flTlsVerify {
		cli = client.NewDockerCli(stdin, stdout, stderr, *flTrustKey, protoAddrParts[0], protoAddrParts[1], &tlsConfig)
	} else {
		cli = client.NewDockerCli(stdin, stdout, stderr, *flTrustKey, protoAddrParts[0], protoAddrParts[1], nil)
	}

	if err := cli.Cmd(flag.Args()...); err != nil {
		if sterr, ok := err.(client.StatusError); ok {
			if sterr.Status != "" {
				fmt.Fprintln(cli.Err(), sterr.Status)
				os.Exit(1)
			}
			os.Exit(sterr.StatusCode)
		}
		fmt.Fprintln(cli.Err(), err)
		os.Exit(1)
	}
}
Exemplo n.º 22
0
func main() {
	if reexec.Init() {
		return
	}

	// Set terminal emulation based on platform as required.
	stdin, stdout, stderr := term.StdStreams()

	initLogging(stderr)

	flag.Parse()
	// FIXME: validate daemon flags here

	if *flVersion {
		showVersion()
		return
	}

	if *flConfigDir != "" {
		cliconfig.SetConfigDir(*flConfigDir)
	}

	if *flLogLevel != "" {
		lvl, err := logrus.ParseLevel(*flLogLevel)
		if err != nil {
			fmt.Fprintf(os.Stderr, "Unable to parse logging level: %s\n", *flLogLevel)
			os.Exit(1)
		}
		setLogLevel(lvl)
	} else {
		setLogLevel(logrus.InfoLevel)
	}

	if *flDebug {
		os.Setenv("DEBUG", "1")
		setLogLevel(logrus.DebugLevel)
	}

	if len(flHosts) == 0 {
		defaultHost := os.Getenv("DOCKER_HOST")
		if defaultHost == "" || *flDaemon {
			if runtime.GOOS != "windows" {
				// If we do not have a host, default to unix socket
				defaultHost = fmt.Sprintf("unix://%s", opts.DefaultUnixSocket)
			} else {
				// If we do not have a host, default to TCP socket on Windows
				defaultHost = fmt.Sprintf("tcp://%s:%d", opts.DefaultHTTPHost, opts.DefaultHTTPPort)
			}
		}
		defaultHost, err := opts.ValidateHost(defaultHost)
		if err != nil {
			if *flDaemon {
				logrus.Fatal(err)
			} else {
				fmt.Fprint(os.Stderr, err)
			}
			os.Exit(1)
		}
		flHosts = append(flHosts, defaultHost)
	}

	setDefaultConfFlag(flTrustKey, defaultTrustKeyFile)

	// Regardless of whether the user sets it to true or false, if they
	// specify --tlsverify at all then we need to turn on tls
	// *flTlsVerify can be true even if not set due to DOCKER_TLS_VERIFY env var, so we need to check that here as well
	if flag.IsSet("-tlsverify") || *flTlsVerify {
		*flTls = true
	}

	if *flDaemon {
		if *flHelp {
			flag.Usage()
			return
		}
		mainDaemon()
		return
	}

	// From here on, we assume we're a client, not a server.

	if len(flHosts) > 1 {
		fmt.Fprintf(os.Stderr, "Please specify only one -H")
		os.Exit(0)
	}
	protoAddrParts := strings.SplitN(flHosts[0], "://", 2)

	var tlsConfig *tls.Config
	if *flTls {
		tlsOptions.InsecureSkipVerify = !*flTlsVerify
		if !flag.IsSet("-tlscert") {
			if _, err := os.Stat(tlsOptions.CertFile); os.IsNotExist(err) {
				tlsOptions.CertFile = ""
			}
		}
		if !flag.IsSet("-tlskey") {
			if _, err := os.Stat(tlsOptions.KeyFile); os.IsNotExist(err) {
				tlsOptions.KeyFile = ""
			}
		}
		var err error
		tlsConfig, err = tlsconfig.Client(tlsOptions)
		if err != nil {
			fmt.Fprintln(stderr, err)
			os.Exit(1)
		}
	}
	cli := client.NewDockerCli(stdin, stdout, stderr, *flTrustKey, protoAddrParts[0], protoAddrParts[1], tlsConfig)

	if err := cli.Cmd(flag.Args()...); err != nil {
		if sterr, ok := err.(client.StatusError); ok {
			if sterr.Status != "" {
				fmt.Fprintln(cli.Err(), sterr.Status)
				os.Exit(1)
			}
			os.Exit(sterr.StatusCode)
		}
		fmt.Fprintln(cli.Err(), err)
		os.Exit(1)
	}
}
Exemplo n.º 23
0
func main() {
	if reexec.Init() {
		return
	}
	flag.Parse()
	// FIXME: validate daemon flags here

	if *flVersion {
		showVersion()
		return
	}
	if *flDebug {
		os.Setenv("DEBUG", "1")
	}

	if len(flHosts) == 0 {
		defaultHost := os.Getenv("DOCKER_HOST")
		if defaultHost == "" || *flDaemon {
			// If we do not have a host, default to unix socket
			defaultHost = fmt.Sprintf("unix://%s", api.DEFAULTUNIXSOCKET)
		}
		defaultHost, err := api.ValidateHost(defaultHost)
		if err != nil {
			log.Fatal(err)
		}
		flHosts = append(flHosts, defaultHost)
	}

	if *flDaemon {
		mainDaemon()
		return
	}

	if len(flHosts) > 1 {
		log.Fatal("Please specify only one -H")
	}
	protoAddrParts := strings.SplitN(flHosts[0], "://", 2)

	var (
		cli       *client.DockerCli
		tlsConfig tls.Config
	)
	tlsConfig.InsecureSkipVerify = true

	// If we should verify the server, we need to load a trusted ca
	if *flTlsVerify {
		*flTls = true
		certPool := x509.NewCertPool()
		file, err := ioutil.ReadFile(*flCa)
		if err != nil {
			log.Fatalf("Couldn't read ca cert %s: %s", *flCa, err)
		}
		certPool.AppendCertsFromPEM(file)
		tlsConfig.RootCAs = certPool
		tlsConfig.InsecureSkipVerify = false
	}

	// If tls is enabled, try to load and send client certificates
	if *flTls || *flTlsVerify {
		_, errCert := os.Stat(*flCert)
		_, errKey := os.Stat(*flKey)
		if errCert == nil && errKey == nil {
			*flTls = true
			cert, err := tls.LoadX509KeyPair(*flCert, *flKey)
			if err != nil {
				log.Fatalf("Couldn't load X509 key pair: %s. Key encrypted?", err)
			}
			tlsConfig.Certificates = []tls.Certificate{cert}
		}
	}

	if *flTls || *flTlsVerify {
		cli = client.NewDockerCli(os.Stdin, os.Stdout, os.Stderr, nil, protoAddrParts[0], protoAddrParts[1], &tlsConfig)
	} else {
		cli = client.NewDockerCli(os.Stdin, os.Stdout, os.Stderr, nil, protoAddrParts[0], protoAddrParts[1], nil)
	}

	if err := cli.Cmd(flag.Args()...); err != nil {
		if sterr, ok := err.(*utils.StatusError); ok {
			if sterr.Status != "" {
				log.Infof("%s", sterr.Status)
			}
			os.Exit(sterr.StatusCode)
		}
		log.Fatal(err)
	}
}
Exemplo n.º 24
0
func main() {
	procs := runtime.NumCPU()
	// packet sniffing can block an OS thread, so we need one thread
	// for that plus at least one more.
	if procs < 2 {
		procs = 2
	}
	runtime.GOMAXPROCS(procs)

	var (
		justVersion        bool
		config             mesh.Config
		networkConfig      weave.NetworkConfig
		protocolMinVersion int
		ifaceName          string
		routerName         string
		nickName           string
		password           string
		pktdebug           bool
		logLevel           string
		prof               string
		bufSzMB            int
		noDiscovery        bool
		httpAddr           string
		iprangeCIDR        string
		ipsubnetCIDR       string
		peerCount          int
		dockerAPI          string
		peers              []string
		noDNS              bool
		dnsConfig          dnsConfig
		datapathName       string
		trustedSubnetStr   string

		defaultDockerHost = "unix:///var/run/docker.sock"
	)

	if val := os.Getenv("DOCKER_HOST"); val != "" {
		defaultDockerHost = val
	}

	mflag.BoolVar(&justVersion, []string{"#version", "-version"}, false, "print version and exit")
	mflag.StringVar(&config.Host, []string{"-host"}, "", "router host")
	mflag.IntVar(&config.Port, []string{"#port", "-port"}, mesh.Port, "router port")
	mflag.IntVar(&protocolMinVersion, []string{"-min-protocol-version"}, mesh.ProtocolMinVersion, "minimum weave protocol version")
	mflag.StringVar(&ifaceName, []string{"#iface", "-iface"}, "", "name of interface to capture/inject from (disabled if blank)")
	mflag.StringVar(&routerName, []string{"#name", "-name"}, "", "name of router (defaults to MAC of interface)")
	mflag.StringVar(&nickName, []string{"#nickname", "-nickname"}, "", "nickname of peer (defaults to hostname)")
	mflag.StringVar(&password, []string{"#password", "-password"}, "", "network password")
	mflag.StringVar(&logLevel, []string{"-log-level"}, "info", "logging level (debug, info, warning, error)")
	mflag.BoolVar(&pktdebug, []string{"#pktdebug", "#-pktdebug", "-pkt-debug"}, false, "enable per-packet debug logging")
	mflag.StringVar(&prof, []string{"#profile", "-profile"}, "", "enable profiling and write profiles to given path")
	mflag.IntVar(&config.ConnLimit, []string{"#connlimit", "#-connlimit", "-conn-limit"}, 30, "connection limit (0 for unlimited)")
	mflag.BoolVar(&noDiscovery, []string{"#nodiscovery", "#-nodiscovery", "-no-discovery"}, false, "disable peer discovery")
	mflag.IntVar(&bufSzMB, []string{"#bufsz", "-bufsz"}, 8, "capture buffer size in MB")
	mflag.StringVar(&httpAddr, []string{"#httpaddr", "#-httpaddr", "-http-addr"}, "", "address to bind HTTP interface to (disabled if blank, absolute path indicates unix domain socket)")
	mflag.StringVar(&iprangeCIDR, []string{"#iprange", "#-iprange", "-ipalloc-range"}, "", "IP address range reserved for automatic allocation, in CIDR notation")
	mflag.StringVar(&ipsubnetCIDR, []string{"#ipsubnet", "#-ipsubnet", "-ipalloc-default-subnet"}, "", "subnet to allocate within by default, in CIDR notation")
	mflag.IntVar(&peerCount, []string{"#initpeercount", "#-initpeercount", "-init-peer-count"}, 0, "number of peers in network (for IP address allocation)")
	mflag.StringVar(&dockerAPI, []string{"#api", "#-api", "-docker-api"}, defaultDockerHost, "Docker API endpoint")
	mflag.BoolVar(&noDNS, []string{"-no-dns"}, false, "disable DNS server")
	mflag.StringVar(&dnsConfig.Domain, []string{"-dns-domain"}, nameserver.DefaultDomain, "local domain to server requests for")
	mflag.StringVar(&dnsConfig.ListenAddress, []string{"-dns-listen-address"}, nameserver.DefaultListenAddress, "address to listen on for DNS requests")
	mflag.IntVar(&dnsConfig.TTL, []string{"-dns-ttl"}, nameserver.DefaultTTL, "TTL for DNS request from our domain")
	mflag.DurationVar(&dnsConfig.ClientTimeout, []string{"-dns-fallback-timeout"}, nameserver.DefaultClientTimeout, "timeout for fallback DNS requests")
	mflag.StringVar(&dnsConfig.EffectiveListenAddress, []string{"-dns-effective-listen-address"}, "", "address DNS will actually be listening, after Docker port mapping")
	mflag.StringVar(&datapathName, []string{"-datapath"}, "", "ODP datapath name")

	mflag.StringVar(&trustedSubnetStr, []string{"-trusted-subnets"}, "", "Command separated list of trusted subnets in CIDR notation")

	// crude way of detecting that we probably have been started in a
	// container, with `weave launch` --> suppress misleading paths in
	// mflags error messages.
	if os.Args[0] == "/home/weave/weaver" { // matches the Dockerfile ENTRYPOINT
		os.Args[0] = "weave"
		mflag.CommandLine.Init("weave", mflag.ExitOnError)
	}

	mflag.Parse()

	peers = mflag.Args()

	SetLogLevel(logLevel)

	if justVersion {
		fmt.Printf("weave router %s\n", version)
		os.Exit(0)
	}

	Log.Println("Command line options:", options())
	Log.Println("Command line peers:", peers)

	if prof != "" {
		p := *profile.CPUProfile
		p.ProfilePath = prof
		p.NoShutdownHook = true
		defer profile.Start(&p).Stop()
	}

	if protocolMinVersion < mesh.ProtocolMinVersion || protocolMinVersion > mesh.ProtocolMaxVersion {
		Log.Fatalf("--min-protocol-version must be in range [%d,%d]", mesh.ProtocolMinVersion, mesh.ProtocolMaxVersion)
	}
	config.ProtocolMinVersion = byte(protocolMinVersion)

	if pktdebug {
		networkConfig.PacketLogging = packetLogging{}
	} else {
		networkConfig.PacketLogging = nopPacketLogging{}
	}

	overlay, bridge := createOverlay(datapathName, ifaceName, config.Host, config.Port, bufSzMB)
	networkConfig.Bridge = bridge

	name := peerName(routerName, bridge.Interface())

	if nickName == "" {
		var err error
		nickName, err = os.Hostname()
		checkFatal(err)
	}

	config.Password = determinePassword(password)
	config.TrustedSubnets = parseTrustedSubnets(trustedSubnetStr)
	config.PeerDiscovery = !noDiscovery

	router := weave.NewNetworkRouter(config, networkConfig, name, nickName, overlay)
	Log.Println("Our name is", router.Ourself)

	var dockerCli *docker.Client
	if dockerAPI != "" {
		dc, err := docker.NewClient(dockerAPI)
		if err != nil {
			Log.Fatal("Unable to start docker client: ", err)
		} else {
			Log.Info(dc.Info())
		}
		dockerCli = dc
	}
	observeContainers := func(o docker.ContainerObserver) {
		if dockerCli != nil {
			if err := dockerCli.AddObserver(o); err != nil {
				Log.Fatal("Unable to start watcher", err)
			}
		}
	}
	isKnownPeer := func(name mesh.PeerName) bool {
		return router.Peers.Fetch(name) != nil
	}

	var (
		allocator     *ipam.Allocator
		defaultSubnet address.CIDR
	)
	if iprangeCIDR != "" {
		allocator, defaultSubnet = createAllocator(router.Router, iprangeCIDR, ipsubnetCIDR, determineQuorum(peerCount, peers), isKnownPeer)
		observeContainers(allocator)
	} else if peerCount > 0 {
		Log.Fatal("--init-peer-count flag specified without --ipalloc-range")
	}

	var (
		ns        *nameserver.Nameserver
		dnsserver *nameserver.DNSServer
	)
	if !noDNS {
		ns, dnsserver = createDNSServer(dnsConfig, router.Router, isKnownPeer)
		observeContainers(ns)
		ns.Start()
		defer ns.Stop()
		dnsserver.ActivateAndServe()
		defer dnsserver.Stop()
	}

	router.Start()
	if errors := router.ConnectionMaker.InitiateConnections(peers, false); len(errors) > 0 {
		Log.Fatal(ErrorMessages(errors))
	}

	// The weave script always waits for a status call to succeed,
	// so there is no point in doing "weave launch --http-addr ''".
	// This is here to support stand-alone use of weaver.
	if httpAddr != "" {
		muxRouter := mux.NewRouter()
		if allocator != nil {
			allocator.HandleHTTP(muxRouter, defaultSubnet, dockerCli)
		}
		if ns != nil {
			ns.HandleHTTP(muxRouter, dockerCli)
		}
		router.HandleHTTP(muxRouter)
		HandleHTTP(muxRouter, version, router, allocator, defaultSubnet, ns, dnsserver)
		http.Handle("/", muxRouter)
		Log.Println("Listening for HTTP control messages on", httpAddr)
		go listenAndServeHTTP(httpAddr, muxRouter)
	}

	SignalHandlerLoop(router)
}
Exemplo n.º 25
0
func main() {
	//启动前检查,防止出现已经启动的情况
	if reexec.Init() {
		return
	}

	// Set terminal emulation based on platform as required.
	stdin, stdout, stderr := term.StdStreams()

	logrus.SetOutput(stderr)

	//合并参数类型,所有的参数类型都是FlagSet类,该类定义如下:
	//type FlagSet struct {
	// Usage is the function called when an error occurs while parsing flags.
	// The field is a function (not a method) that may be changed to point to
	// a custom error handler.
	/*Usage      func()
		ShortUsage func()

		name             string
		parsed           bool
		actual           map[string]*Flag
		formal           map[string]*Flag
		args             []string // arguments after flags
		errorHandling    ErrorHandling
		output           io.Writer // nil means stderr; use Out() accessor
		nArgRequirements []nArgRequirement
	}*/
	//合并参数到flag.CommandLine中。CommandLine中对应的是Options。
	flag.Merge(flag.CommandLine, clientFlags.FlagSet, commonFlags.FlagSet)

	//打印docker的使用方式。这里其实只是设置Usage这个函数的实现,以便需要打印的时候打印。
	flag.Usage = func() {
		//第一行是正常的使用方式;第二行是daemon的使用方式;第三行固定输出
		fmt.Fprint(stdout, "Usage: docker [OPTIONS] COMMAND [arg...]\n"+daemonUsage+"       docker [ --help | -v | --version ]\n\n")
		fmt.Fprint(stdout, "A self-sufficient runtime for containers.\n\nOptions:\n")

		//输出Options的内容,打印CommandLine中的内容。这一行设置输出到标准输出。
		flag.CommandLine.SetOutput(stdout)
		//真实的打印内容
		flag.PrintDefaults()

		//开始打印可选择的命令Commands。
		help := "\nCommands:\n"

		//循环输出dockerCommands命令中的可选择命令,分别打印他们的名字和描述信息。
		//dockerCommands最终由cli.DockerCommands中提供。
		for _, cmd := range dockerCommands {
			help += fmt.Sprintf("    %-10.10s%s\n", cmd.Name, cmd.Description)
		}

		help += "\nRun 'docker COMMAND --help' for more information on a command."
		//真实的打印
		fmt.Fprintf(stdout, "%s\n", help)
	}

	//解析参数
	flag.Parse()

	//version单独处理,这里通过判断flVersion的返回结果是否为真进行处理。
	if *flVersion {
		showVersion()
		return
	}
	//help信息单独处理
	if *flHelp {
		// if global flag --help is present, regardless of what other options and commands there are,
		// just print the usage.
		flag.Usage()
		return
	}

	//创建client模式的docker,详细分析请见api/client/cli.go包中的NewDockerCli函数。
	clientCli := client.NewDockerCli(stdin, stdout, stderr, clientFlags)

	//合并client模式的docker和daemonCli模式的docker,实际中只会有一个在工作。
	//daemonCli对象的创建请见docker/daemon.go中的daemonCli cli.Handler = NewDaemonCli()
	//cli.New接受两个参数,分别是dockercli对象和daemoncli对象,两个对象结构不同。
	//但是返回的是一个cli对象:
	/*
			type Cli struct {
			    Stderr   io.Writer
			    handlers []Handler
			    Usage    func()
		            }
	*/
	//clientClie和daemoncli就放在句柄handlers数组中。
	c := cli.New(clientCli, daemonCli)
	//c.Run函数见cli中的cli.go的func (cli *Cli) Run(args ...string) error
	if err := c.Run(flag.Args()...); err != nil {
		if sterr, ok := err.(cli.StatusError); ok {
			if sterr.Status != "" {
				fmt.Fprintln(stderr, sterr.Status)
				os.Exit(1)
			}
			os.Exit(sterr.StatusCode)
		}
		fmt.Fprintln(stderr, err)
		os.Exit(1)
	}
}
Exemplo n.º 26
0
func main() {
	procs := runtime.NumCPU()
	// packet sniffing can block an OS thread, so we need one thread
	// for that plus at least one more.
	if procs < 2 {
		procs = 2
	}
	runtime.GOMAXPROCS(procs)

	var (
		// flags that cause immediate exit
		justVersion          bool
		createDatapath       bool
		deleteDatapath       bool
		addDatapathInterface string

		config                    mesh.Config
		networkConfig             weave.NetworkConfig
		protocolMinVersion        int
		ifaceName                 string
		routerName                string
		nickName                  string
		password                  string
		pktdebug                  bool
		logLevel                  string
		prof                      string
		bufSzMB                   int
		noDiscovery               bool
		httpAddr                  string
		iprangeCIDR               string
		ipsubnetCIDR              string
		peerCount                 int
		dockerAPI                 string
		peers                     []string
		noDNS                     bool
		dnsDomain                 string
		dnsListenAddress          string
		dnsTTL                    int
		dnsClientTimeout          time.Duration
		dnsEffectiveListenAddress string
		iface                     *net.Interface
		datapathName              string
		trustedSubnetStr          string

		defaultDockerHost = "unix:///var/run/docker.sock"
	)

	if val := os.Getenv("DOCKER_HOST"); val != "" {
		defaultDockerHost = val
	}

	mflag.BoolVar(&justVersion, []string{"#version", "-version"}, false, "print version and exit")
	mflag.BoolVar(&createDatapath, []string{"-create-datapath"}, false, "create ODP datapath and exit")
	mflag.BoolVar(&deleteDatapath, []string{"-delete-datapath"}, false, "delete ODP datapath and exit")
	mflag.StringVar(&addDatapathInterface, []string{"-add-datapath-iface"}, "", "add a network interface to the ODP datapath and exit")

	mflag.IntVar(&config.Port, []string{"#port", "-port"}, mesh.Port, "router port")
	mflag.IntVar(&protocolMinVersion, []string{"-min-protocol-version"}, mesh.ProtocolMinVersion, "minimum weave protocol version")
	mflag.StringVar(&ifaceName, []string{"#iface", "-iface"}, "", "name of interface to capture/inject from (disabled if blank)")
	mflag.StringVar(&routerName, []string{"#name", "-name"}, "", "name of router (defaults to MAC of interface)")
	mflag.StringVar(&nickName, []string{"#nickname", "-nickname"}, "", "nickname of peer (defaults to hostname)")
	mflag.StringVar(&password, []string{"#password", "-password"}, "", "network password")
	mflag.StringVar(&logLevel, []string{"-log-level"}, "info", "logging level (debug, info, warning, error)")
	mflag.BoolVar(&pktdebug, []string{"#pktdebug", "#-pktdebug", "-pkt-debug"}, false, "enable per-packet debug logging")
	mflag.StringVar(&prof, []string{"#profile", "-profile"}, "", "enable profiling and write profiles to given path")
	mflag.IntVar(&config.ConnLimit, []string{"#connlimit", "#-connlimit", "-conn-limit"}, 30, "connection limit (0 for unlimited)")
	mflag.BoolVar(&noDiscovery, []string{"#nodiscovery", "#-nodiscovery", "-no-discovery"}, false, "disable peer discovery")
	mflag.IntVar(&bufSzMB, []string{"#bufsz", "-bufsz"}, 8, "capture buffer size in MB")
	mflag.StringVar(&httpAddr, []string{"#httpaddr", "#-httpaddr", "-http-addr"}, "", "address to bind HTTP interface to (disabled if blank, absolute path indicates unix domain socket)")
	mflag.StringVar(&iprangeCIDR, []string{"#iprange", "#-iprange", "-ipalloc-range"}, "", "IP address range reserved for automatic allocation, in CIDR notation")
	mflag.StringVar(&ipsubnetCIDR, []string{"#ipsubnet", "#-ipsubnet", "-ipalloc-default-subnet"}, "", "subnet to allocate within by default, in CIDR notation")
	mflag.IntVar(&peerCount, []string{"#initpeercount", "#-initpeercount", "-init-peer-count"}, 0, "number of peers in network (for IP address allocation)")
	mflag.StringVar(&dockerAPI, []string{"#api", "#-api", "-docker-api"}, defaultDockerHost, "Docker API endpoint")
	mflag.BoolVar(&noDNS, []string{"-no-dns"}, false, "disable DNS server")
	mflag.StringVar(&dnsDomain, []string{"-dns-domain"}, nameserver.DefaultDomain, "local domain to server requests for")
	mflag.StringVar(&dnsListenAddress, []string{"-dns-listen-address"}, nameserver.DefaultListenAddress, "address to listen on for DNS requests")
	mflag.IntVar(&dnsTTL, []string{"-dns-ttl"}, nameserver.DefaultTTL, "TTL for DNS request from our domain")
	mflag.DurationVar(&dnsClientTimeout, []string{"-dns-fallback-timeout"}, nameserver.DefaultClientTimeout, "timeout for fallback DNS requests")
	mflag.StringVar(&dnsEffectiveListenAddress, []string{"-dns-effective-listen-address"}, "", "address DNS will actually be listening, after Docker port mapping")
	mflag.StringVar(&datapathName, []string{"-datapath"}, "", "ODP datapath name")

	mflag.StringVar(&trustedSubnetStr, []string{"-trusted-subnets"}, "", "Command separated list of trusted subnets in CIDR notation")

	// crude way of detecting that we probably have been started in a
	// container, with `weave launch` --> suppress misleading paths in
	// mflags error messages.
	if os.Args[0] == "/home/weave/weaver" { // matches the Dockerfile ENTRYPOINT
		os.Args[0] = "weave"
		mflag.CommandLine.Init("weave", mflag.ExitOnError)
	}

	mflag.Parse()

	peers = mflag.Args()

	SetLogLevel(logLevel)

	switch {
	case justVersion:
		fmt.Printf("weave router %s\n", version)
		os.Exit(0)

	case createDatapath:
		odpSupported, err := odp.CreateDatapath(datapathName)
		if !odpSupported {
			if err != nil {
				Log.Error(err)
			}

			// When the kernel lacks ODP support, exit
			// with a special status to distinguish it for
			// the weave script.
			os.Exit(17)
		}

		checkFatal(err)
		os.Exit(0)

	case deleteDatapath:
		checkFatal(odp.DeleteDatapath(datapathName))
		os.Exit(0)

	case addDatapathInterface != "":
		checkFatal(odp.AddDatapathInterface(datapathName, addDatapathInterface))
		os.Exit(0)
	}

	Log.Println("Command line options:", options())
	Log.Println("Command line peers:", peers)

	if protocolMinVersion < mesh.ProtocolMinVersion || protocolMinVersion > mesh.ProtocolMaxVersion {
		Log.Fatalf("--min-protocol-version must be in range [%d,%d]", mesh.ProtocolMinVersion, mesh.ProtocolMaxVersion)
	}
	config.ProtocolMinVersion = byte(protocolMinVersion)

	overlays := weave.NewOverlaySwitch()
	if datapathName != "" {
		// A datapath name implies that "Bridge" and "Overlay"
		// packet handling use fast datapath, although other
		// options can override that below.  Even if both
		// things are overridden, we might need bridging on
		// the datapath.
		fastdp, err := weave.NewFastDatapath(datapathName, config.Port)
		checkFatal(err)
		networkConfig.Bridge = fastdp.Bridge()
		overlays.Add("fastdp", fastdp.Overlay())
	}
	sleeve := weave.NewSleeveOverlay(config.Port)
	overlays.Add("sleeve", sleeve)
	overlays.SetCompatOverlay(sleeve)

	if ifaceName != "" {
		// -iface can coexist with -datapath, because
		// pcap-based packet capture is a bit more efficient
		// than capture via ODP misses, even when using an
		// ODP-based bridge.  So when using weave encyption,
		// it's preferable to use -iface.
		var err error
		iface, err = weavenet.EnsureInterface(ifaceName)
		checkFatal(err)

		// bufsz flag is in MB
		networkConfig.Bridge, err = weave.NewPcap(iface, bufSzMB*1024*1024)
		checkFatal(err)
	}

	if password == "" {
		password = os.Getenv("WEAVE_PASSWORD")
	}

	if password == "" {
		Log.Println("Communication between peers is unencrypted.")
	} else {
		config.Password = []byte(password)
		Log.Println("Communication between peers via untrusted networks is encrypted.")
	}

	if routerName == "" {
		if iface == nil {
			Log.Fatal("Either an interface must be specified with --iface or a name with -name")
		}
		routerName = iface.HardwareAddr.String()
	}

	name, err := mesh.PeerNameFromUserInput(routerName)
	checkFatal(err)

	if nickName == "" {
		nickName, err = os.Hostname()
		checkFatal(err)
	}

	if prof != "" {
		p := *profile.CPUProfile
		p.ProfilePath = prof
		p.NoShutdownHook = true
		defer profile.Start(&p).Stop()
	}

	config.PeerDiscovery = !noDiscovery

	if pktdebug {
		networkConfig.PacketLogging = packetLogging{}
	} else {
		networkConfig.PacketLogging = nopPacketLogging{}
	}

	if config.TrustedSubnets, err = parseTrustedSubnets(trustedSubnetStr); err != nil {
		Log.Fatal("Unable to parse trusted subnets: ", err)
	}

	router := weave.NewNetworkRouter(config, networkConfig, name, nickName, overlays)
	Log.Println("Our name is", router.Ourself)

	var dockerCli *docker.Client
	if dockerAPI != "" {
		dc, err := docker.NewClient(dockerAPI)
		if err != nil {
			Log.Fatal("Unable to start docker client: ", err)
		} else {
			Log.Info(dc.Info())
		}
		dockerCli = dc
	}
	observeContainers := func(o docker.ContainerObserver) {
		if dockerCli != nil {
			if err = dockerCli.AddObserver(o); err != nil {
				Log.Fatal("Unable to start watcher", err)
			}
		}
	}
	isKnownPeer := func(name mesh.PeerName) bool {
		return router.Peers.Fetch(name) != nil
	}
	var allocator *ipam.Allocator
	var defaultSubnet address.CIDR
	if iprangeCIDR != "" {
		allocator, defaultSubnet = createAllocator(router.Router, iprangeCIDR, ipsubnetCIDR, determineQuorum(peerCount, peers), isKnownPeer)
		observeContainers(allocator)
	} else if peerCount > 0 {
		Log.Fatal("--init-peer-count flag specified without --ipalloc-range")
	}

	var (
		ns        *nameserver.Nameserver
		dnsserver *nameserver.DNSServer
	)
	if !noDNS {
		ns = nameserver.New(router.Ourself.Peer.Name, dnsDomain, isKnownPeer)
		router.Peers.OnGC(func(peer *mesh.Peer) { ns.PeerGone(peer.Name) })
		ns.SetGossip(router.NewGossip("nameserver", ns))
		observeContainers(ns)
		ns.Start()
		defer ns.Stop()
		dnsserver, err = nameserver.NewDNSServer(ns, dnsDomain, dnsListenAddress,
			dnsEffectiveListenAddress, uint32(dnsTTL), dnsClientTimeout)
		if err != nil {
			Log.Fatal("Unable to start dns server: ", err)
		}
		listenAddr := dnsListenAddress
		if dnsEffectiveListenAddress != "" {
			listenAddr = dnsEffectiveListenAddress
		}
		Log.Println("Listening for DNS queries on", listenAddr)
		dnsserver.ActivateAndServe()
		defer dnsserver.Stop()
	}

	router.Start()
	if errors := router.ConnectionMaker.InitiateConnections(peers, false); len(errors) > 0 {
		Log.Fatal(ErrorMessages(errors))
	}

	// The weave script always waits for a status call to succeed,
	// so there is no point in doing "weave launch --http-addr ''".
	// This is here to support stand-alone use of weaver.
	if httpAddr != "" {
		muxRouter := mux.NewRouter()
		if allocator != nil {
			allocator.HandleHTTP(muxRouter, defaultSubnet, dockerCli)
		}
		if ns != nil {
			ns.HandleHTTP(muxRouter, dockerCli)
		}
		router.HandleHTTP(muxRouter)
		HandleHTTP(muxRouter, version, router, allocator, defaultSubnet, ns, dnsserver)
		http.Handle("/", muxRouter)
		Log.Println("Listening for HTTP control messages on", httpAddr)
		go listenAndServeHTTP(httpAddr, muxRouter)
	}

	SignalHandlerLoop(router)
}
Exemplo n.º 27
0
// Start is the entrypoint
func Start(rawArgs []string, streams *commands.Streams) (int, error) {
	checkVersion()
	if streams == nil {
		streams = &commands.Streams{
			Stdin:  os.Stdin,
			Stdout: os.Stdout,
			Stderr: os.Stderr,
		}
	}
	flag.CommandLine.Parse(rawArgs)

	config, cfgErr := config.GetConfig()
	if cfgErr != nil && !os.IsNotExist(cfgErr) {
		return 1, fmt.Errorf("unable to open .scwrc config file: %v", cfgErr)
	}

	if *flVersion {
		fmt.Fprintf(streams.Stderr, "scw version %s, build %s\n", scwversion.VERSION, scwversion.GITCOMMIT)
		return 0, nil
	}

	if *flSensitive {
		os.Setenv("SCW_SENSITIVE", "1")
	}

	if *flDebug {
		os.Setenv("DEBUG", "1")
	}

	utils.Quiet(*flQuiet)
	initLogging(os.Getenv("DEBUG") != "", *flVerbose, streams)

	args := flag.Args()
	if len(args) < 1 {
		CmdHelp.Exec(CmdHelp, []string{})
		return 1, nil
	}
	name := args[0]

	args = args[1:]

	// Apply default values
	for _, cmd := range Commands {
		cmd.streams = streams
	}

	for _, cmd := range Commands {
		if cmd.Name() == name {
			cmd.Flag.SetOutput(ioutil.Discard)
			err := cmd.Flag.Parse(args)
			if err != nil {
				return 1, fmt.Errorf("usage: scw %s", cmd.UsageLine)
			}
			switch cmd.Name() {
			case "login", "help", "version":
				// commands that don't need API
			case "_userdata":
				// commands that may need API
				api, _ := getScalewayAPI()
				cmd.API = api
			default:
				// commands that do need API
				if cfgErr != nil {
					if name != "login" && config == nil {
						logrus.Debugf("cfgErr: %v", cfgErr)
						fmt.Fprintf(streams.Stderr, "You need to login first: 'scw login'\n")
						return 1, nil
					}
				}
				api, errGet := getScalewayAPI()
				if errGet != nil {
					return 1, fmt.Errorf("unable to initialize scw api: %v", errGet)
				}
				cmd.API = api
			}
			// clean cache between versions
			if cmd.API != nil && config.Version != scwversion.VERSION {
				cmd.API.ClearCache()
				config.Save()
			}
			err = cmd.Exec(cmd, cmd.Flag.Args())
			switch err {
			case nil:
			case ErrExitFailure:
				return 1, nil
			case ErrExitSuccess:
				return 0, nil
			default:
				return 1, fmt.Errorf("cannot execute '%s': %v", cmd.Name(), err)
			}
			if cmd.API != nil {
				cmd.API.Sync()
			}
			return 0, nil
		}
	}
	return 1, fmt.Errorf("scw: unknown subcommand %s\nRun 'scw help' for usage", name)
}
Exemplo n.º 28
0
func main() {
	procs := runtime.NumCPU()
	// packet sniffing can block an OS thread, so we need one thread
	// for that plus at least one more.
	if procs < 2 {
		procs = 2
	}
	runtime.GOMAXPROCS(procs)

	var (
		config             weave.Config
		justVersion        bool
		protocolMinVersion int
		ifaceName          string
		routerName         string
		nickName           string
		password           string
		wait               int
		pktdebug           bool
		logLevel           string
		prof               string
		bufSzMB            int
		noDiscovery        bool
		httpAddr           string
		iprangeCIDR        string
		ipsubnetCIDR       string
		peerCount          int
		apiPath            string
		peers              []string
		noDNS              bool
		dnsDomain          string
		dnsPort            int
		dnsTTL             int
		dnsClientTimeout   time.Duration
	)

	mflag.BoolVar(&justVersion, []string{"#version", "-version"}, false, "print version and exit")
	mflag.IntVar(&config.Port, []string{"#port", "-port"}, weave.Port, "router port")
	mflag.IntVar(&protocolMinVersion, []string{"-min-protocol-version"}, weave.ProtocolMinVersion, "minimum weave protocol version")
	mflag.StringVar(&ifaceName, []string{"#iface", "-iface"}, "", "name of interface to capture/inject from (disabled if blank)")
	mflag.StringVar(&routerName, []string{"#name", "-name"}, "", "name of router (defaults to MAC of interface)")
	mflag.StringVar(&nickName, []string{"#nickname", "-nickname"}, "", "nickname of peer (defaults to hostname)")
	mflag.StringVar(&password, []string{"#password", "-password"}, "", "network password")
	mflag.IntVar(&wait, []string{"#wait", "-wait"}, -1, "number of seconds to wait for interface to come up (0=don't wait, -1=wait forever)")
	mflag.StringVar(&logLevel, []string{"-log-level"}, "info", "logging level (debug, info, warning, error)")
	mflag.BoolVar(&pktdebug, []string{"#pktdebug", "#-pktdebug", "-pkt-debug"}, false, "enable per-packet debug logging")
	mflag.StringVar(&prof, []string{"#profile", "-profile"}, "", "enable profiling and write profiles to given path")
	mflag.IntVar(&config.ConnLimit, []string{"#connlimit", "#-connlimit", "-conn-limit"}, 30, "connection limit (0 for unlimited)")
	mflag.BoolVar(&noDiscovery, []string{"#nodiscovery", "#-nodiscovery", "-no-discovery"}, false, "disable peer discovery")
	mflag.IntVar(&bufSzMB, []string{"#bufsz", "-bufsz"}, 8, "capture buffer size in MB")
	mflag.StringVar(&httpAddr, []string{"#httpaddr", "#-httpaddr", "-http-addr"}, fmt.Sprintf(":%d", weave.HTTPPort), "address to bind HTTP interface to (disabled if blank, absolute path indicates unix domain socket)")
	mflag.StringVar(&iprangeCIDR, []string{"#iprange", "#-iprange", "-ipalloc-range"}, "", "IP address range reserved for automatic allocation, in CIDR notation")
	mflag.StringVar(&ipsubnetCIDR, []string{"#ipsubnet", "#-ipsubnet", "-ipalloc-default-subnet"}, "", "subnet to allocate within by default, in CIDR notation")
	mflag.IntVar(&peerCount, []string{"#initpeercount", "#-initpeercount", "-init-peer-count"}, 0, "number of peers in network (for IP address allocation)")
	mflag.StringVar(&apiPath, []string{"#api", "-api"}, "unix:///var/run/docker.sock", "Path to Docker API socket")
	mflag.BoolVar(&noDNS, []string{"-no-dns"}, false, "disable DNS server")
	mflag.StringVar(&dnsDomain, []string{"-dns-domain"}, nameserver.DefaultDomain, "local domain to server requests for")
	mflag.IntVar(&dnsPort, []string{"-dns-port"}, nameserver.DefaultPort, "port to listen on for DNS requests")
	mflag.IntVar(&dnsTTL, []string{"-dns-ttl"}, nameserver.DefaultTTL, "TTL for DNS request from our domain")
	mflag.DurationVar(&dnsClientTimeout, []string{"-dns-fallback-timeout"}, nameserver.DefaultClientTimeout, "timeout for fallback DNS requests")

	mflag.Parse()
	peers = mflag.Args()

	SetLogLevel(logLevel)
	if justVersion {
		fmt.Printf("weave router %s\n", version)
		os.Exit(0)
	}

	Log.Println("Command line options:", options())
	Log.Println("Command line peers:", peers)

	if protocolMinVersion < weave.ProtocolMinVersion || protocolMinVersion > weave.ProtocolMaxVersion {
		Log.Fatalf("--min-protocol-version must be in range [%d,%d]", weave.ProtocolMinVersion, weave.ProtocolMaxVersion)
	}
	config.ProtocolMinVersion = byte(protocolMinVersion)

	var err error

	if ifaceName != "" {
		config.Iface, err = weavenet.EnsureInterface(ifaceName, wait)
		if err != nil {
			Log.Fatal(err)
		}
	}

	if routerName == "" {
		if config.Iface == nil {
			Log.Fatal("Either an interface must be specified with --iface or a name with -name")
		}
		routerName = config.Iface.HardwareAddr.String()
	}
	name, err := weave.PeerNameFromUserInput(routerName)
	if err != nil {
		Log.Fatal(err)
	}

	if nickName == "" {
		nickName, err = os.Hostname()
		if err != nil {
			Log.Fatal(err)
		}
	}

	if password == "" {
		password = os.Getenv("WEAVE_PASSWORD")
	}
	if password == "" {
		Log.Println("Communication between peers is unencrypted.")
	} else {
		config.Password = []byte(password)
		Log.Println("Communication between peers is encrypted.")
	}

	if prof != "" {
		p := *profile.CPUProfile
		p.ProfilePath = prof
		p.NoShutdownHook = true
		defer profile.Start(&p).Stop()
	}

	config.BufSz = bufSzMB * 1024 * 1024
	config.LogFrame = logFrameFunc(pktdebug)
	config.PeerDiscovery = !noDiscovery

	router := weave.NewRouter(config, name, nickName)
	Log.Println("Our name is", router.Ourself)

	dockerCli, err := docker.NewClient(apiPath)
	if err != nil {
		Log.Fatal("Unable to start docker client: ", err)
	}

	var allocator *ipam.Allocator
	var defaultSubnet address.CIDR
	if iprangeCIDR != "" {
		allocator, defaultSubnet = createAllocator(router, iprangeCIDR, ipsubnetCIDR, determineQuorum(peerCount, peers))
		if err = dockerCli.AddObserver(allocator); err != nil {
			Log.Fatal("Unable to start watcher", err)
		}
	} else if peerCount > 0 {
		Log.Fatal("--init-peer-count flag specified without --ipalloc-range")
	}

	var (
		ns        *nameserver.Nameserver
		dnsserver *nameserver.DNSServer
	)
	if !noDNS {
		ns = nameserver.New(router.Ourself.Peer.Name, router.Peers, dockerCli, dnsDomain)
		ns.SetGossip(router.NewGossip("nameserver", ns))
		if err = dockerCli.AddObserver(ns); err != nil {
			Log.Fatal("Unable to start watcher", err)
		}
		ns.Start()
		defer ns.Stop()
		dnsserver, err = nameserver.NewDNSServer(ns, dnsDomain, dnsPort, uint32(dnsTTL), dnsClientTimeout)
		if err != nil {
			Log.Fatal("Unable to start dns server: ", err)
		}
		dnsserver.ActivateAndServe()
		defer dnsserver.Stop()
	}

	router.Start()
	if errors := router.ConnectionMaker.InitiateConnections(peers, false); len(errors) > 0 {
		Log.Fatal(errorMessages(errors))
	}

	// The weave script always waits for a status call to succeed,
	// so there is no point in doing "weave launch --http-addr ''".
	// This is here to support stand-alone use of weaver.
	if httpAddr != "" {
		go handleHTTP(router, httpAddr, allocator, defaultSubnet, dockerCli, ns, dnsserver)
	}

	SignalHandlerLoop(router)
}
Exemplo n.º 29
0
func main() {
	config, cfgErr := getConfig()
	if cfgErr != nil && !os.IsNotExist(cfgErr) {
		log.Fatalf("Unable to open .scwrc config file: %v", cfgErr)
	}

	if config != nil {
		flAPIEndPoint = flag.String([]string{"-api-endpoint"}, config.APIEndPoint, "Set the API endpoint")
	}
	flag.Parse()

	if *flVersion {
		showVersion()
		return
	}

	if flAPIEndPoint != nil {
		os.Setenv("scaleway_api_endpoint", *flAPIEndPoint)
	}

	if *flSensitive {
		os.Setenv("SCW_SENSITIVE", "1")
	}

	if *flDebug {
		os.Setenv("DEBUG", "1")
	}

	initLogging(os.Getenv("DEBUG") != "")

	args := flag.Args()
	if len(args) < 1 {
		usage()
	}
	name := args[0]

	args = args[1:]

	for _, cmd := range cmds.Commands {
		if cmd.Name() == name {
			cmd.Flag.SetOutput(ioutil.Discard)
			err := cmd.Flag.Parse(args)
			if err != nil {
				log.Fatalf("usage: scw %s", cmd.UsageLine)
			}
			if cmd.Name() != "login" && cmd.Name() != "help" && cmd.Name() != "version" {
				if cfgErr != nil {
					if name != "login" && config == nil {
						fmt.Fprintf(os.Stderr, "You need to login first: 'scw login'\n")
						os.Exit(1)
					}
				}
				api, err := getScalewayAPI()
				if err != nil {
					log.Fatalf("unable to initialize scw api: %s", err)
				}
				cmd.API = api
			}
			cmd.Exec(cmd, cmd.Flag.Args())
			if cmd.API != nil {
				cmd.API.Sync()
			}
			os.Exit(0)
		}
	}

	log.Fatalf("scw: unknown subcommand %s\nRun 'scw help' for usage.", name)
}