Exemplo n.º 1
0
// Start prepares the container to run by setting up everything the
// container needs, such as storage and networking, as well as links
// between containers. The container is left waiting for a signal to
// begin running.
func (container *Container) Start() (err error) {
	container.Lock()
	defer container.Unlock()

	if container.Running {
		return nil
	}

	if container.removalInProgress || container.Dead {
		return fmt.Errorf("Container is marked for removal and cannot be started.")
	}

	// if we encounter an error during start we need to ensure that any other
	// setup has been cleaned up properly
	defer func() {
		if err != nil {
			container.setError(err)
			// if no one else has set it, make sure we don't leave it at zero
			if container.ExitCode == 0 {
				container.ExitCode = 128
			}
			container.toDisk()
			container.cleanup()
			container.logEvent("die")
		}
	}()

	if err := container.Mount(); err != nil {
		return err
	}

	// Make sure NetworkMode has an acceptable value. We do this to ensure
	// backwards API compatibility.
	container.hostConfig = runconfig.SetDefaultNetModeIfBlank(container.hostConfig)

	if err := container.initializeNetworking(); err != nil {
		return err
	}
	linkedEnv, err := container.setupLinkedContainers()
	if err != nil {
		return err
	}
	if err := container.setupWorkingDirectory(); err != nil {
		return err
	}
	env := container.createDaemonEnvironment(linkedEnv)
	if err := populateCommand(container, env); err != nil {
		return err
	}

	mounts, err := container.setupMounts()
	if err != nil {
		return err
	}

	container.command.Mounts = mounts
	return container.waitForStart()
}
Exemplo n.º 2
0
// containerStart prepares the container to run by setting up everything the
// container needs, such as storage and networking, as well as links
// between containers. The container is left waiting for a signal to
// begin running.
func (daemon *Daemon) containerStart(container *container.Container) (err error) {
	container.Lock()
	defer container.Unlock()

	if container.Running {
		return nil
	}

	if container.RemovalInProgress || container.Dead {
		return derr.ErrorCodeContainerBeingRemoved
	}

	// if we encounter an error during start we need to ensure that any other
	// setup has been cleaned up properly
	defer func() {
		if err != nil {
			container.SetError(err)
			// if no one else has set it, make sure we don't leave it at zero
			if container.ExitCode == 0 {
				container.ExitCode = 128
			}
			container.ToDisk()
			daemon.Cleanup(container)
			daemon.LogContainerEvent(container, "die")
		}
	}()

	if err := daemon.conditionalMountOnStart(container); err != nil {
		return err
	}

	// Make sure NetworkMode has an acceptable value. We do this to ensure
	// backwards API compatibility.
	container.HostConfig = runconfig.SetDefaultNetModeIfBlank(container.HostConfig)

	if err := daemon.initializeNetworking(container); err != nil {
		return err
	}
	linkedEnv, err := daemon.setupLinkedContainers(container)
	if err != nil {
		return err
	}
	if err := container.SetupWorkingDirectory(); err != nil {
		return err
	}
	env := container.CreateDaemonEnvironment(linkedEnv)
	if err := daemon.populateCommand(container, env); err != nil {
		return err
	}

	if !container.HostConfig.IpcMode.IsContainer() && !container.HostConfig.IpcMode.IsHost() {
		if err := daemon.setupIpcDirs(container); err != nil {
			return err
		}
	}

	mounts, err := daemon.setupMounts(container)
	if err != nil {
		return err
	}
	mounts = append(mounts, container.IpcMounts()...)
	mounts = append(mounts, container.TmpfsMounts()...)

	container.Command.Mounts = mounts
	if err := daemon.waitForStart(container); err != nil {
		return err
	}
	container.HasBeenStartedBefore = true
	return nil
}
Exemplo n.º 3
0
// Create creates a new container from the given configuration with a given name.
func (daemon *Daemon) create(params types.ContainerCreateConfig, managed bool) (retC *container.Container, retErr error) {
	var (
		container *container.Container
		img       *image.Image
		imgID     image.ID
		err       error
	)

	if params.Config.Image != "" {
		img, err = daemon.GetImage(params.Config.Image)
		if err != nil {
			return nil, err
		}
		imgID = img.ID()
	}

	if err := daemon.mergeAndVerifyConfig(params.Config, img); err != nil {
		return nil, err
	}

	if err := daemon.mergeAndVerifyLogConfig(&params.HostConfig.LogConfig); err != nil {
		return nil, err
	}

	if container, err = daemon.newContainer(params.Name, params.Config, imgID, managed); err != nil {
		return nil, err
	}
	defer func() {
		if retErr != nil {
			if err := daemon.cleanupContainer(container, true, true); err != nil {
				logrus.Errorf("failed to cleanup container on create error: %v", err)
			}
		}
	}()

	if err := daemon.setSecurityOptions(container, params.HostConfig); err != nil {
		return nil, err
	}

	container.HostConfig.StorageOpt = params.HostConfig.StorageOpt

	// Set RWLayer for container after mount labels have been set
	if err := daemon.setRWLayer(container); err != nil {
		return nil, err
	}

	rootUID, rootGID, err := idtools.GetRootUIDGID(daemon.uidMaps, daemon.gidMaps)
	if err != nil {
		return nil, err
	}
	if err := idtools.MkdirAs(container.Root, 0700, rootUID, rootGID); err != nil {
		return nil, err
	}
	if err := idtools.MkdirAs(container.CheckpointDir(), 0700, rootUID, rootGID); err != nil {
		return nil, err
	}

	if err := daemon.setHostConfig(container, params.HostConfig); err != nil {
		return nil, err
	}

	if err := daemon.createContainerPlatformSpecificSettings(container, params.Config, params.HostConfig); err != nil {
		return nil, err
	}

	var endpointsConfigs map[string]*networktypes.EndpointSettings
	if params.NetworkingConfig != nil {
		endpointsConfigs = params.NetworkingConfig.EndpointsConfig
	}
	// Make sure NetworkMode has an acceptable value. We do this to ensure
	// backwards API compatibility.
	container.HostConfig = runconfig.SetDefaultNetModeIfBlank(container.HostConfig)

	daemon.updateContainerNetworkSettings(container, endpointsConfigs)

	if err := container.ToDisk(); err != nil {
		logrus.Errorf("Error saving new container to disk: %v", err)
		return nil, err
	}
	if err := daemon.Register(container); err != nil {
		return nil, err
	}
	daemon.LogContainerEvent(container, "create")
	return container, nil
}
Exemplo n.º 4
0
// containerStart prepares the container to run by setting up everything the
// container needs, such as storage and networking, as well as links
// between containers. The container is left waiting for a signal to
// begin running.
func (daemon *Daemon) containerStart(container *container.Container, checkpoint string, resetRestartManager bool) (err error) {
	container.Lock()
	defer container.Unlock()

	if resetRestartManager && container.Running { // skip this check if already in restarting step and resetRestartManager==false
		return nil
	}

	if container.RemovalInProgress || container.Dead {
		return fmt.Errorf("Container is marked for removal and cannot be started.")
	}

	// if we encounter an error during start we need to ensure that any other
	// setup has been cleaned up properly
	defer func() {
		if err != nil {
			container.SetError(err)
			// if no one else has set it, make sure we don't leave it at zero
			if container.ExitCode() == 0 {
				container.SetExitCode(128)
			}
			container.ToDisk()
			daemon.Cleanup(container)
			// if containers AutoRemove flag is set, remove it after clean up
			if container.HostConfig.AutoRemove {
				container.Unlock()
				if err := daemon.ContainerRm(container.ID, &types.ContainerRmConfig{ForceRemove: true, RemoveVolume: true}); err != nil {
					logrus.Errorf("can't remove container %s: %v", container.ID, err)
				}
				container.Lock()
			}
		}
	}()

	if err := daemon.conditionalMountOnStart(container); err != nil {
		return err
	}

	// Make sure NetworkMode has an acceptable value. We do this to ensure
	// backwards API compatibility.
	container.HostConfig = runconfig.SetDefaultNetModeIfBlank(container.HostConfig)

	if err := daemon.initializeNetworking(container); err != nil {
		return err
	}

	spec, err := daemon.createSpec(container)
	if err != nil {
		return err
	}

	createOptions, err := daemon.getLibcontainerdCreateOptions(container)
	if err != nil {
		return err
	}

	if resetRestartManager {
		container.ResetRestartManager(true)
	}

	if err := daemon.containerd.Create(container.ID, checkpoint, container.CheckpointDir(), *spec, container.InitializeStdio, createOptions...); err != nil {
		errDesc := grpc.ErrorDesc(err)
		logrus.Errorf("Create container failed with error: %s", errDesc)
		// if we receive an internal error from the initial start of a container then lets
		// return it instead of entering the restart loop
		// set to 127 for container cmd not found/does not exist)
		if strings.Contains(errDesc, container.Path) &&
			(strings.Contains(errDesc, "executable file not found") ||
				strings.Contains(errDesc, "no such file or directory") ||
				strings.Contains(errDesc, "system cannot find the file specified")) {
			container.SetExitCode(127)
		}
		// set to 126 for container cmd can't be invoked errors
		if strings.Contains(errDesc, syscall.EACCES.Error()) {
			container.SetExitCode(126)
		}

		// attempted to mount a file onto a directory, or a directory onto a file, maybe from user specified bind mounts
		if strings.Contains(errDesc, syscall.ENOTDIR.Error()) {
			errDesc += ": Are you trying to mount a directory onto a file (or vice-versa)? Check if the specified host path exists and is the expected type"
			container.SetExitCode(127)
		}

		container.Reset(false)

		return fmt.Errorf("%s", errDesc)
	}

	return nil
}
Exemplo n.º 5
0
// containerStart prepares the container to run by setting up everything the
// container needs, such as storage and networking, as well as links
// between containers. The container is left waiting for a signal to
// begin running.
func (daemon *Daemon) containerStart(container *container.Container) (err error) {
	container.Lock()
	defer container.Unlock()

	if container.Running {
		return nil
	}

	if container.RemovalInProgress || container.Dead {
		return fmt.Errorf("Container is marked for removal and cannot be started.")
	}

	// if we encounter an error during start we need to ensure that any other
	// setup has been cleaned up properly
	defer func() {
		if err != nil {
			container.SetError(err)
			// if no one else has set it, make sure we don't leave it at zero
			if container.ExitCode == 0 {
				container.ExitCode = 128
			}
			container.ToDisk()
			daemon.Cleanup(container)
		}
	}()

	if err := daemon.conditionalMountOnStart(container); err != nil {
		return err
	}

	// Make sure NetworkMode has an acceptable value. We do this to ensure
	// backwards API compatibility.
	container.HostConfig = runconfig.SetDefaultNetModeIfBlank(container.HostConfig)

	if err := daemon.initializeNetworking(container); err != nil {
		return err
	}

	spec, err := daemon.createSpec(container)
	if err != nil {
		return err
	}

	if err := daemon.containerd.Create(container.ID, *spec, libcontainerd.WithRestartManager(container.RestartManager(true))); err != nil {
		errDesc := grpc.ErrorDesc(err)
		logrus.Errorf("Create container failed with error: %s", errDesc)
		// if we receive an internal error from the initial start of a container then lets
		// return it instead of entering the restart loop
		// set to 127 for container cmd not found/does not exist)
		if strings.Contains(errDesc, "executable file not found") ||
			strings.Contains(errDesc, "no such file or directory") ||
			strings.Contains(errDesc, "system cannot find the file specified") {
			container.ExitCode = 127
		}
		// set to 126 for container cmd can't be invoked errors
		if strings.Contains(errDesc, syscall.EACCES.Error()) {
			container.ExitCode = 126
		}

		container.Reset(false)

		return fmt.Errorf("%s", errDesc)
	}

	return nil
}
Exemplo n.º 6
0
// containerStart prepares the container to run by setting up everything the
// container needs, such as storage and networking, as well as links
// between containers. The container is left waiting for a signal to
// begin running.
//容器启动的核心方法。
func (daemon *Daemon) containerStart(container *container.Container) (err error) {

	//这里的锁是干什么的?
	container.Lock()
	defer container.Unlock()

	if container.Running {
		return nil
	}

	if container.RemovalInProgress || container.Dead {
		return fmt.Errorf("Container is marked for removal and cannot be started.")
	}

	// if we encounter an error during start we need to ensure that any other
	// setup has been cleaned up properly
	defer func() {
		if err != nil {
			container.SetError(err)
			// if no one else has set it, make sure we don't leave it at zero
			if container.ExitCode == 0 {
				container.ExitCode = 128
			}
			container.ToDisk()
			daemon.Cleanup(container)

			attributes := map[string]string{
				"exitCode": fmt.Sprintf("%d", container.ExitCode),
			}
			daemon.LogContainerEventWithAttributes(container, "die", attributes)
		}
	}()

	//挂载容器的文件系统。会调用daemon/daemon.go中的Mount()方法。
	//不过那个方法比较奇怪,感觉正常情况下并不会做什么事情。

	if err := daemon.conditionalMountOnStart(container); err != nil {
		return err
	}

	// Make sure NetworkMode has an acceptable value. We do this to ensure
	// backwards API compatibility.
	//设置默认的网络模式。
	container.HostConfig = runconfig.SetDefaultNetModeIfBlank(container.HostConfig)

	/*
		initializeNetworking() 对网络进行初始化,docker网络模式有三种,分别是 bridge模式
		(每个容器用户单独的网络栈),host模式(与宿主机共用一个网络栈),contaier模式
		(与其他容器共用一个网络栈,猜测kubernate中的pod所用的模式);
		根据config和hostConfig中的参数来确定容器的网络模式,然后调动libnetwork包来建立网络
	*/
	if err := daemon.initializeNetworking(container); err != nil {
		return err
	}

	//创建容器关于namespace和cgroup等的运行环境。在daemon/oci_linux.go中。
	//Spec中包括了容器的最基本的信息。
	spec, err := daemon.createSpec(container)
	if err != nil {
		return err
	}

	//运行容器,详细请见libcontainerd/client_linux.go中Create()方法。
	if err := daemon.containerd.Create(container.ID, *spec, libcontainerd.WithRestartManager(container.RestartManager(true))); err != nil {
		// if we receive an internal error from the initial start of a container then lets
		// return it instead of entering the restart loop
		// set to 127 for container cmd not found/does not exist)
		if strings.Contains(err.Error(), "executable file not found") ||
			strings.Contains(err.Error(), "no such file or directory") ||
			strings.Contains(err.Error(), "system cannot find the file specified") {
			container.ExitCode = 127
			err = fmt.Errorf("Container command '%s' not found or does not exist.", container.Path)
		}
		// set to 126 for container cmd can't be invoked errors
		if strings.Contains(err.Error(), syscall.EACCES.Error()) {
			container.ExitCode = 126
			err = fmt.Errorf("Container command '%s' could not be invoked.", container.Path)
		}

		container.Reset(false)

		// start event is logged even on error
		daemon.LogContainerEvent(container, "start")
		return err
	}

	return nil
}