func (v *veth) initialize(config *network) error {
peer := config.TempVethPeerName
if peer == "" {
return fmt.Errorf("peer is not specified")
}
child, err := net.InterfaceByName(peer)
if err != nil {
return err
}
if err := netlink.NetworkLinkDown(child); err != nil {
return err
}
if err := netlink.NetworkChangeName(child, config.Name); err != nil {
return err
}
// get the interface again after we changed the name as the index also changes.
if child, err = net.InterfaceByName(config.Name); err != nil {
return err
}
if config.MacAddress != "" {
if err := netlink.NetworkSetMacAddress(child, config.MacAddress); err != nil {
return err
}
}
ip, ipNet, err := net.ParseCIDR(config.Address)
if err != nil {
return err
}
if err := netlink.NetworkLinkAddIp(child, ip, ipNet); err != nil {
return err
}
if config.IPv6Address != "" {
if ip, ipNet, err = net.ParseCIDR(config.IPv6Address); err != nil {
return err
}
if err := netlink.NetworkLinkAddIp(child, ip, ipNet); err != nil {
return err
}
}
if err := netlink.NetworkSetMTU(child, config.Mtu); err != nil {
return err
}
if err := netlink.NetworkLinkUp(child); err != nil {
return err
}
if config.Gateway != "" {
if err := netlink.AddDefaultGw(config.Gateway, config.Name); err != nil {
return err
}
}
if config.IPv6Gateway != "" {
if err := netlink.AddDefaultGw(config.IPv6Gateway, config.Name); err != nil {
return err
}
}
return nil
}
// SetPeerLinkNetInNs configures peer link's IP network in network namespace specified by PID
func (veth *VethPair) SetPeerLinkNetInNs(nspid int, ip net.IP, network *net.IPNet, gw *net.IP) error {
origNs, _ := NetNsHandle(os.Getpid())
defer syscall.Close(int(origNs))
defer system.Setns(origNs, syscall.CLONE_NEWNET)
if err := SetNetNsToPid(nspid); err != nil {
return fmt.Errorf("Setting network namespace failed: %s", err)
}
if err := netlink.NetworkLinkAddIp(veth.peerIfc, ip, network); err != nil {
return fmt.Errorf("Unable to set IP: %s in pid: %d network namespace", ip.String(), nspid)
}
if err := netlink.NetworkLinkUp(veth.peerIfc); err != nil {
return fmt.Errorf("Unable to bring %s interface UP: %s", veth.peerIfc.Name, nspid)
}
if gw != nil {
if err := netlink.AddDefaultGw(gw.String(), veth.peerIfc.Name); err != nil {
return fmt.Errorf("Unable to set Default gateway: %s in pid: %d network namespace", gw.String(), nspid)
}
}
return nil
}
func main() {
log.SetFlags(log.Lshortfile)
iface, err := net.InterfaceByName("eth0")
if err != nil {
log.Fatal(err)
}
ip, ipNet, _ := net.ParseCIDR("192.168.122.128/24")
if err := netlink.NetworkLinkAddIp(iface, ip, ipNet); err != nil {
log.Fatal(err)
}
if err := netlink.AddDefaultGw("192.168.122.1", "eth0"); err != nil {
log.Fatal(err)
}
if err := netlink.NetworkLinkUp(iface); err != nil {
log.Fatal(err)
}
start := time.Now()
arping.SetTimeout(100 * time.Millisecond)
for {
addr, t, err := arping.PingOverIface(net.ParseIP("192.168.122.1"), *iface)
if err != nil {
log.Println("ARP error:", err)
continue
}
log.Printf("ARP success after %s: %v %v", time.Now().Sub(start), addr, t)
return
}
}
func createBridge(name, network, natIface string) (*Bridge, error) {
ipAddr, ipNet, err := net.ParseCIDR(network)
if err != nil {
return nil, err
}
if err := netlink.CreateBridge(name, true); err != nil {
return nil, err
}
iface, err := net.InterfaceByName(name)
if err != nil {
return nil, err
}
if err := netlink.NetworkLinkAddIp(iface, ipAddr, ipNet); err != nil {
return nil, err
}
if err := netlink.NetworkLinkUp(iface); err != nil {
return nil, err
}
if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte("1\n"), 0644); err != nil {
return nil, err
}
if err := setupIPTables(name, natIface); err != nil {
return nil, err
}
return &Bridge{name, iface, ipAddr, ipNet}, nil
}
func SetInterfaceIp(name string, rawIp string) error {
iface, err := net.InterfaceByName(name)
if err != nil {
return err
}
ip, ipNet, err := net.ParseCIDR(rawIp)
if err != nil {
return err
}
return netlink.NetworkLinkAddIp(iface, ip, ipNet)
}
// Create creates a bridge device and returns the interface.
// If the device already exists, returns the existing interface.
func (Bridge) Create(name string, ip net.IP, subnet *net.IPNet) (intf *net.Interface, err error) {
netlinkMu.Lock()
defer netlinkMu.Unlock()
if intf, err = idempotentlyCreateBridge(name); err != nil {
return nil, err
}
if err = netlink.NetworkLinkAddIp(intf, ip, subnet); err != nil && err.Error() != "file exists" {
return nil, fmt.Errorf("devices: add IP to bridge: %v", err)
}
return intf, nil
}
// Create creates a bridge device and returns the interface.
// If the device already exists, returns the existing interface.
func (Bridge) Create(name string, ip net.IP, subnet *net.IPNet) (intf *net.Interface, err error) {
netlinkMu.Lock()
defer netlinkMu.Unlock()
if err := netlink.NetworkLinkAdd(name, "bridge"); err != nil && err.Error() != "file exists" {
return nil, fmt.Errorf("devices: create bridge: %v", err)
}
if intf, err = net.InterfaceByName(name); err != nil {
return nil, fmt.Errorf("devices: look up created bridge interface: %v", err)
}
if err = netlink.NetworkLinkAddIp(intf, ip, subnet); err != nil && err.Error() != "file exists" {
return nil, fmt.Errorf("devices: add IP to bridge: %v", err)
}
return intf, nil
}
func createBridge(name, network, natIface string) (*Bridge, error) {
ipAddr, ipNet, err := net.ParseCIDR(network)
if err != nil {
return nil, err
}
if err := netlink.CreateBridge(name, true); err != nil {
return nil, err
}
iface, err := net.InterfaceByName(name)
if err != nil {
return nil, err
}
// We need to explicitly assign the MAC address to avoid it changing to a lower value
// See: https://github.com/flynn/flynn/issues/223
b := random.Bytes(5)
mac := fmt.Sprintf("fe:%02x:%02x:%02x:%02x:%02x", b[0], b[1], b[2], b[3], b[4])
if err := netlink.NetworkSetMacAddress(iface, mac); err != nil {
return nil, err
}
if err := netlink.NetworkLinkAddIp(iface, ipAddr, ipNet); err != nil {
return nil, err
}
if err := netlink.NetworkLinkUp(iface); err != nil {
return nil, err
}
if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte("1\n"), 0644); err != nil {
return nil, err
}
if err := setupIPTables(name, natIface); err != nil {
return nil, err
}
bridge := &Bridge{
name: name,
iface: iface,
ipAddr: ipAddr,
ipNet: ipNet,
alloc: ipallocator.New(),
}
bridge.alloc.RequestIP(ipNet, ipAddr)
return bridge, nil
}
// Setup networking
func setupNetworking(args *InitArgs) error {
if args.Ip != "" {
// eth0
iface, err := net.InterfaceByName("eth0")
if err != nil {
return fmt.Errorf("Unable to set up networking: %v", err)
}
ip, ipNet, err := net.ParseCIDR(args.Ip)
if err != nil {
return fmt.Errorf("Unable to set up networking: %v", err)
}
if err := netlink.NetworkLinkAddIp(iface, ip, ipNet); err != nil {
return fmt.Errorf("Unable to set up networking: %v", err)
}
if err := netlink.NetworkSetMTU(iface, args.Mtu); err != nil {
return fmt.Errorf("Unable to set MTU: %v", err)
}
if err := netlink.NetworkLinkUp(iface); err != nil {
return fmt.Errorf("Unable to set up networking: %v", err)
}
// loopback
iface, err = net.InterfaceByName("lo")
if err != nil {
return fmt.Errorf("Unable to set up networking: %v", err)
}
if err := netlink.NetworkLinkUp(iface); err != nil {
return fmt.Errorf("Unable to set up networking: %v", err)
}
}
if args.Gateway != "" {
gw := net.ParseIP(args.Gateway)
if gw == nil {
return fmt.Errorf("Unable to set up networking, %s is not a valid gateway IP", args.Gateway)
}
if err := netlink.AddDefaultGw(gw.String(), "eth0"); err != nil {
return fmt.Errorf("Unable to set up networking: %v", err)
}
}
return nil
}
func (t *TapManager) NewTap(uid, gid int) (*Tap, error) {
tap := &Tap{Name: "flynntap." + util.RandomString(5), bridge: t.bridge}
if err := createTap(tap.Name, uid, gid); err != nil {
return nil, err
}
var err error
tap.LocalIP, err = ipallocator.RequestIP(t.bridge.ipNet, nil)
if err != nil {
tap.Close()
return nil, err
}
tap.RemoteIP, err = ipallocator.RequestIP(t.bridge.ipNet, nil)
if err != nil {
tap.Close()
return nil, err
}
iface, err := net.InterfaceByName(tap.Name)
if err != nil {
tap.Close()
return nil, err
}
if err := netlink.NetworkLinkAddIp(iface, *tap.LocalIP, t.bridge.ipNet); err != nil {
tap.Close()
return nil, err
}
if err := netlink.NetworkLinkUp(iface); err != nil {
tap.Close()
return nil, err
}
if err := netlink.AddToBridge(iface, t.bridge.iface); err != nil {
tap.Close()
return nil, err
}
return tap, nil
}
func setupIPv6Bridge(bridgeIPv6 string) error {
iface, err := net.InterfaceByName(bridgeIface)
if err != nil {
return err
}
// Enable IPv6 on the bridge
procFile := "/proc/sys/net/ipv6/conf/" + iface.Name + "/disable_ipv6"
if err := ioutil.WriteFile(procFile, []byte{'0', '\n'}, 0644); err != nil {
return fmt.Errorf("Unable to enable IPv6 addresses on bridge: %v", err)
}
ipAddr6, ipNet6, err := net.ParseCIDR(bridgeIPv6)
if err != nil {
return fmt.Errorf("Unable to parse bridge IPv6 address: %q, error: %v", bridgeIPv6, err)
}
if err := netlink.NetworkLinkAddIp(iface, ipAddr6, ipNet6); err != nil {
return fmt.Errorf("Unable to add private IPv6 network: %v", err)
}
return nil
}
// configureBridge attempts to create and configure a network bridge interface named `bridgeIface` on the host
// If bridgeIP is empty, it will try to find a non-conflicting IP from the Docker-specified private ranges
// If the bridge `bridgeIface` already exists, it will only perform the IP address association with the existing
// bridge (fixes issue #8444)
// If an address which doesn't conflict with existing interfaces can't be found, an error is returned.
func configureBridge(bridgeIP string) error {
nameservers := []string{}
resolvConf, _ := resolvconf.Get()
// we don't check for an error here, because we don't really care
// if we can't read /etc/resolv.conf. So instead we skip the append
// if resolvConf is nil. It either doesn't exist, or we can't read it
// for some reason.
if resolvConf != nil {
nameservers = append(nameservers, resolvconf.GetNameserversAsCIDR(resolvConf)...)
}
var ifaceAddr string
if len(bridgeIP) != 0 {
_, _, err := net.ParseCIDR(bridgeIP)
if err != nil {
return err
}
ifaceAddr = bridgeIP
} else {
for _, addr := range addrs {
_, dockerNetwork, err := net.ParseCIDR(addr)
if err != nil {
return err
}
if err := networkdriver.CheckNameserverOverlaps(nameservers, dockerNetwork); err == nil {
if err := networkdriver.CheckRouteOverlaps(dockerNetwork); err == nil {
ifaceAddr = addr
break
} else {
log.Debugf("%s %s", addr, err)
}
}
}
}
if ifaceAddr == "" {
return fmt.Errorf("Could not find a free IP address range for interface '%s'. Please configure its address manually and run 'docker -b %s'", bridgeIface, bridgeIface)
}
log.Debugf("Creating bridge %s with network %s", bridgeIface, ifaceAddr)
if err := createBridgeIface(bridgeIface); err != nil {
// the bridge may already exist, therefore we can ignore an "exists" error
if !os.IsExist(err) {
return err
}
}
iface, err := net.InterfaceByName(bridgeIface)
if err != nil {
return err
}
ipAddr, ipNet, err := net.ParseCIDR(ifaceAddr)
if err != nil {
return err
}
if netlink.NetworkLinkAddIp(iface, ipAddr, ipNet); err != nil {
return fmt.Errorf("Unable to add private network: %s", err)
}
if err := netlink.NetworkLinkUp(iface); err != nil {
return fmt.Errorf("Unable to start network bridge: %s", err)
}
return nil
}
// ConfigureNetworking is called once during host startup and sets up the local
// bridge and forwarding rules for containers.
func (l *LibcontainerBackend) ConfigureNetworking(config *host.NetworkConfig) error {
log := l.logger.New("fn", "ConfigureNetworking")
var err error
l.bridgeAddr, l.bridgeNet, err = net.ParseCIDR(config.Subnet)
if err != nil {
return err
}
l.ipalloc.RequestIP(l.bridgeNet, l.bridgeAddr)
err = netlink.CreateBridge(l.bridgeName, false)
bridgeExists := os.IsExist(err)
if err != nil && !bridgeExists {
return err
}
bridge, err := net.InterfaceByName(l.bridgeName)
if err != nil {
return err
}
if !bridgeExists {
// We need to explicitly assign the MAC address to avoid it changing to a lower value
// See: https://github.com/flynn/flynn/issues/223
b := random.Bytes(5)
bridgeMAC := fmt.Sprintf("fe:%02x:%02x:%02x:%02x:%02x", b[0], b[1], b[2], b[3], b[4])
if err := netlink.NetworkSetMacAddress(bridge, bridgeMAC); err != nil {
return err
}
}
currAddrs, err := bridge.Addrs()
if err != nil {
return err
}
setIP := true
for _, addr := range currAddrs {
ip, net, _ := net.ParseCIDR(addr.String())
if ip.Equal(l.bridgeAddr) && net.String() == l.bridgeNet.String() {
setIP = false
} else {
if err := netlink.NetworkLinkDelIp(bridge, ip, net); err != nil {
return err
}
}
}
if setIP {
if err := netlink.NetworkLinkAddIp(bridge, l.bridgeAddr, l.bridgeNet); err != nil {
return err
}
}
if err := netlink.NetworkLinkUp(bridge); err != nil {
return err
}
// enable IP forwarding
if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte("1\n"), 0644); err != nil {
return err
}
// Set up iptables for outbound traffic masquerading from containers to the
// rest of the network.
if err := iptables.EnableOutboundNAT(l.bridgeName, l.bridgeNet.String()); err != nil {
return err
}
// Read DNS config, discoverd uses the nameservers
dnsConf, err := dns.ClientConfigFromFile("/etc/resolv.conf")
if err != nil {
return err
}
config.Resolvers = dnsConf.Servers
// Write a resolv.conf to be bind-mounted into containers pointing at the
// future discoverd DNS listener
if err := os.MkdirAll("/etc/flynn", 0755); err != nil {
return err
}
var resolvSearch string
if len(dnsConf.Search) > 0 {
resolvSearch = fmt.Sprintf("search %s\n", strings.Join(dnsConf.Search, " "))
}
if err := ioutil.WriteFile("/etc/flynn/resolv.conf", []byte(fmt.Sprintf("%snameserver %s\n", resolvSearch, l.bridgeAddr.String())), 0644); err != nil {
return err
}
l.resolvConf = "/etc/flynn/resolv.conf"
// Allocate IPs for running jobs
l.containersMtx.Lock()
defer l.containersMtx.Unlock()
for _, container := range l.containers {
if !container.job.Config.HostNetwork {
if _, err := l.ipalloc.RequestIP(l.bridgeNet, container.IP); err != nil {
log.Error("error requesting ip", "job.id", container.job.ID, "err", err)
}
}
}
close(l.networkConfigured)
return nil
}
func (Link) AddIP(intf *net.Interface, ip net.IP, subnet *net.IPNet) error {
netlinkMu.Lock()
defer netlinkMu.Unlock()
return errF(netlink.NetworkLinkAddIp(intf, ip, subnet))
}
// SetPeerLinkIp configures peer link's IP address
func (veth *VethPair) SetPeerLinkIp(ip net.IP, nw *net.IPNet) error {
return netlink.NetworkLinkAddIp(veth.peerIfc, ip, nw)
}
// SetLinkIp configures the link's IP address.
// It is equivalent of running: ip address add ${address}/${mask} dev ${interface name}
func (l *Link) SetLinkIp(ip net.IP, network *net.IPNet) error {
return netlink.NetworkLinkAddIp(l.NetInterface(), ip, network)
}