Exemplo n.º 1
0
func openNextAvailableLoopback(index int, sparseFile *os.File) (loopFile *os.File, err error) {
	// Start looking for a free /dev/loop
	for {
		target := fmt.Sprintf("/dev/loop%d", index)
		index++

		fi, err := os.Stat(target)
		if err != nil {
			if os.IsNotExist(err) {
				log.Errorf("There are no more loopback devices available.")
			}
			return nil, ErrAttachLoopbackDevice
		}

		if fi.Mode()&os.ModeDevice != os.ModeDevice {
			log.Errorf("Loopback device %s is not a block device.", target)
			continue
		}

		// OpenFile adds O_CLOEXEC
		loopFile, err = os.OpenFile(target, os.O_RDWR, 0644)
		if err != nil {
			log.Errorf("Error openning loopback device: %s", err)
			return nil, ErrAttachLoopbackDevice
		}

		// Try to attach to the loop file
		if err := ioctlLoopSetFd(loopFile.Fd(), sparseFile.Fd()); err != nil {
			loopFile.Close()

			// If the error is EBUSY, then try the next loopback
			if err != syscall.EBUSY {
				log.Errorf("Cannot set up loopback device %s: %s", target, err)
				return nil, ErrAttachLoopbackDevice
			}

			// Otherwise, we keep going with the loop
			continue
		}
		// In case of success, we finished. Break the loop.
		break
	}

	// This can't happen, but let's be sure
	if loopFile == nil {
		log.Errorf("Unreachable code reached! Error attaching %s to a loopback device.", sparseFile.Name())
		return nil, ErrAttachLoopbackDevice
	}

	return loopFile, nil
}
Exemplo n.º 2
0
// Check if an image exists in the Registry
// TODO: This method should return the errors instead of masking them and returning false
func (r *Session) LookupRemoteImage(imgID, registry string, token []string) bool {

	req, err := r.reqFactory.NewRequest("GET", registry+"images/"+imgID+"/json", nil)
	if err != nil {
		log.Errorf("Error in LookupRemoteImage %s", err)
		return false
	}
	setTokenAuth(req, token)
	res, _, err := r.doRequest(req)
	if err != nil {
		log.Errorf("Error in LookupRemoteImage %s", err)
		return false
	}
	res.Body.Close()
	return res.StatusCode == 200
}
Exemplo n.º 3
0
func MatchesContentType(contentType, expectedType string) bool {
	mimetype, _, err := mime.ParseMediaType(contentType)
	if err != nil {
		log.Errorf("Error parsing media type: %s error: %s", contentType, err.Error())
	}
	return err == nil && mimetype == expectedType
}
Exemplo n.º 4
0
func LoopbackSetCapacity(file *os.File) error {
	if err := ioctlLoopSetCapacity(file.Fd(), 0); err != nil {
		log.Errorf("Error loopbackSetCapacity: %s", err)
		return ErrLoopbackSetCapacity
	}
	return nil
}
Exemplo n.º 5
0
func wsContainersAttach(eng *engine.Engine, version version.Version, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
	if err := parseForm(r); err != nil {
		return err
	}
	if vars == nil {
		return fmt.Errorf("Missing parameter")
	}

	if err := eng.Job("container_inspect", vars["name"]).Run(); err != nil {
		return err
	}

	h := websocket.Handler(func(ws *websocket.Conn) {
		defer ws.Close()
		job := eng.Job("attach", vars["name"])
		job.Setenv("logs", r.Form.Get("logs"))
		job.Setenv("stream", r.Form.Get("stream"))
		job.Setenv("stdin", r.Form.Get("stdin"))
		job.Setenv("stdout", r.Form.Get("stdout"))
		job.Setenv("stderr", r.Form.Get("stderr"))
		job.Stdin.Add(ws)
		job.Stdout.Add(ws)
		job.Stderr.Set(ws)
		if err := job.Run(); err != nil {
			log.Errorf("Error attaching websocket: %s", err)
		}
	})
	h.ServeHTTP(w, r)

	return nil
}
Exemplo n.º 6
0
func postCommit(eng *engine.Engine, version version.Version, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
	if err := parseForm(r); err != nil {
		return err
	}
	var (
		config       engine.Env
		env          engine.Env
		job          = eng.Job("commit", r.Form.Get("container"))
		stdoutBuffer = bytes.NewBuffer(nil)
	)
	if err := config.Decode(r.Body); err != nil {
		log.Errorf("%s", err)
	}

	if r.FormValue("pause") == "" && version.GreaterThanOrEqualTo("1.13") {
		job.Setenv("pause", "1")
	} else {
		job.Setenv("pause", r.FormValue("pause"))
	}

	job.Setenv("repo", r.Form.Get("repo"))
	job.Setenv("tag", r.Form.Get("tag"))
	job.Setenv("author", r.Form.Get("author"))
	job.Setenv("comment", r.Form.Get("comment"))
	job.SetenvSubEnv("config", &config)

	job.Stdout.Add(stdoutBuffer)
	if err := job.Run(); err != nil {
		return err
	}
	env.Set("Id", engine.Tail(stdoutBuffer, 1))
	return writeJSON(w, http.StatusCreated, env)
}
Exemplo n.º 7
0
func makeHttpHandler(eng *engine.Engine, logging bool, localMethod string, localRoute string, handlerFunc HttpApiFunc, enableCors bool, dockerVersion version.Version) http.HandlerFunc {
	return func(w http.ResponseWriter, r *http.Request) {
		// log the request
		log.Debugf("Calling %s %s", localMethod, localRoute)

		if logging {
			log.Infof("%s %s", r.Method, r.RequestURI)
		}

		if strings.Contains(r.Header.Get("User-Agent"), "Docker-Client/") {
			userAgent := strings.Split(r.Header.Get("User-Agent"), "/")
			if len(userAgent) == 2 && !dockerVersion.Equal(version.Version(userAgent[1])) {
				log.Debugf("Warning: client and server don't have the same version (client: %s, server: %s)", userAgent[1], dockerVersion)
			}
		}
		version := version.Version(mux.Vars(r)["version"])
		if version == "" {
			version = api.APIVERSION
		}
		if enableCors {
			writeCorsHeaders(w, r)
		}

		if version.GreaterThan(api.APIVERSION) {
			http.Error(w, fmt.Errorf("client and server don't have same version (client : %s, server: %s)", version, api.APIVERSION).Error(), http.StatusNotFound)
			return
		}

		if err := handlerFunc(eng, version, w, r, mux.Vars(r)); err != nil {
			log.Errorf("Handler for %s %s returned error: %s", localMethod, localRoute, err)
			httpError(w, err)
		}
	}
}
Exemplo n.º 8
0
func (daemon *Daemon) CmdInfo(job *engine.Job) engine.Status {
	images, _ := daemon.Graph().Map()
	var imgcount int
	if images == nil {
		imgcount = 0
	} else {
		imgcount = len(images)
	}
	kernelVersion := "<unknown>"
	if kv, err := kernel.GetKernelVersion(); err == nil {
		kernelVersion = kv.String()
	}

	operatingSystem := "<unknown>"
	if s, err := operatingsystem.GetOperatingSystem(); err == nil {
		operatingSystem = s
	}
	if inContainer, err := operatingsystem.IsContainerized(); err != nil {
		log.Errorf("Could not determine if daemon is containerized: %v", err)
		operatingSystem += " (error determining if containerized)"
	} else if inContainer {
		operatingSystem += " (containerized)"
	}

	// if we still have the original dockerinit binary from before we copied it locally, let's return the path to that, since that's more intuitive (the copied path is trivial to derive by hand given VERSION)
	initPath := utils.DockerInitPath("")
	if initPath == "" {
		// if that fails, we'll just return the path from the daemon
		initPath = daemon.SystemInitPath()
	}

	cjob := job.Eng.Job("subscribers_count")
	env, _ := cjob.Stdout.AddEnv()
	if err := cjob.Run(); err != nil {
		return job.Error(err)
	}
	v := &engine.Env{}
	v.SetInt("Containers", len(daemon.List()))
	v.SetInt("Images", imgcount)
	v.Set("Driver", daemon.GraphDriver().String())
	v.SetJson("DriverStatus", daemon.GraphDriver().Status())
	v.SetBool("MemoryLimit", daemon.SystemConfig().MemoryLimit)
	v.SetBool("SwapLimit", daemon.SystemConfig().SwapLimit)
	v.SetBool("IPv4Forwarding", !daemon.SystemConfig().IPv4ForwardingDisabled)
	v.SetBool("Debug", os.Getenv("DEBUG") != "")
	v.SetInt("NFd", utils.GetTotalUsedFds())
	v.SetInt("NGoroutines", runtime.NumGoroutine())
	v.Set("ExecutionDriver", daemon.ExecutionDriver().Name())
	v.SetInt("NEventsListener", env.GetInt("count"))
	v.Set("KernelVersion", kernelVersion)
	v.Set("OperatingSystem", operatingSystem)
	v.Set("IndexServerAddress", registry.IndexServerAddress())
	v.Set("InitSha1", dockerversion.INITSHA1)
	v.Set("InitPath", initPath)
	if _, err := v.WriteTo(job.Stdout); err != nil {
		return job.Error(err)
	}
	return engine.StatusOK
}
Exemplo n.º 9
0
func GetBlockDeviceSize(file *os.File) (uint64, error) {
	size, err := ioctlBlkGetSize64(file.Fd())
	if err != nil {
		log.Errorf("Error getblockdevicesize: %s", err)
		return 0, ErrGetBlockSize
	}
	return uint64(size), nil
}
Exemplo n.º 10
0
func getLoopbackBackingFile(file *os.File) (uint64, uint64, error) {
	loopInfo, err := ioctlLoopGetStatus64(file.Fd())
	if err != nil {
		log.Errorf("Error get loopback backing file: %s", err)
		return 0, 0, ErrGetLoopbackBackingFile
	}
	return loopInfo.loDevice, loopInfo.loInode, nil
}
Exemplo n.º 11
0
func GetTotalUsedFds() int {
	if fds, err := ioutil.ReadDir(fmt.Sprintf("/proc/%d/fd", os.Getpid())); err != nil {
		log.Errorf("Error opening /proc/%d/fd: %s", os.Getpid(), err)
	} else {
		return len(fds)
	}
	return -1
}
Exemplo n.º 12
0
// Matches returns true if relFilePath matches any of the patterns
func Matches(relFilePath string, patterns []string) (bool, error) {
	for _, exclude := range patterns {
		matched, err := filepath.Match(exclude, relFilePath)
		if err != nil {
			log.Errorf("Error matching: %s (pattern: %s)", relFilePath, exclude)
			return false, err
		}
		if matched {
			if filepath.Clean(relFilePath) == "." {
				log.Errorf("Can't exclude whole path, excluding pattern: %s", exclude)
				continue
			}
			log.Debugf("Skipping excluded path: %s", relFilePath)
			return true, nil
		}
	}
	return false, nil
}
Exemplo n.º 13
0
func Unmount(target string) error {
	if err := exec.Command("auplink", target, "flush").Run(); err != nil {
		log.Errorf("[warning]: couldn't run auplink before unmount: %s", err)
	}
	if err := syscall.Unmount(target, 0); err != nil {
		return err
	}
	return nil
}
Exemplo n.º 14
0
// attachLoopDevice attaches the given sparse file to the next
// available loopback device. It returns an opened *os.File.
func attachLoopDevice(sparseName string) (loop *os.File, err error) {

	// Try to retrieve the next available loopback device via syscall.
	// If it fails, we discard error and start loopking for a
	// loopback from index 0.
	startIndex, err := getNextFreeLoopbackIndex()
	if err != nil {
		log.Debugf("Error retrieving the next available loopback: %s", err)
	}

	// OpenFile adds O_CLOEXEC
	sparseFile, err := os.OpenFile(sparseName, os.O_RDWR, 0644)
	if err != nil {
		log.Errorf("Error openning sparse file %s: %s", sparseName, err)
		return nil, ErrAttachLoopbackDevice
	}
	defer sparseFile.Close()

	loopFile, err := openNextAvailableLoopback(startIndex, sparseFile)
	if err != nil {
		return nil, err
	}

	// Set the status of the loopback device
	loopInfo := &LoopInfo64{
		loFileName: stringToLoopName(loopFile.Name()),
		loOffset:   0,
		loFlags:    LoFlagsAutoClear,
	}

	if err := ioctlLoopSetStatus64(loopFile.Fd(), loopInfo); err != nil {
		log.Errorf("Cannot set up loopback device info: %s", err)

		// If the call failed, then free the loopback device
		if err := ioctlLoopClrFd(loopFile.Fd()); err != nil {
			log.Errorf("Error while cleaning up the loopback device")
		}
		loopFile.Close()
		return nil, ErrAttachLoopbackDevice
	}

	return loopFile, nil
}
Exemplo n.º 15
0
// resetContainer resets the container's IO and ensures that the command is able to be executed again
// by copying the data into a new struct
func (m *containerMonitor) resetContainer() {
	container := m.container

	if container.Config.OpenStdin {
		if err := container.stdin.Close(); err != nil {
			log.Errorf("%s: Error close stdin: %s", container.ID, err)
		}
	}

	if err := container.stdout.Clean(); err != nil {
		log.Errorf("%s: Error close stdout: %s", container.ID, err)
	}

	if err := container.stderr.Clean(); err != nil {
		log.Errorf("%s: Error close stderr: %s", container.ID, err)
	}

	if container.command != nil && container.command.Terminal != nil {
		if err := container.command.Terminal.Close(); err != nil {
			log.Errorf("%s: Error closing terminal: %s", container.ID, err)
		}
	}

	// Re-create a brand new stdin pipe once the container exited
	if container.Config.OpenStdin {
		container.stdin, container.stdinPipe = io.Pipe()
	}

	c := container.command.Cmd

	container.command.Cmd = exec.Cmd{
		Stdin:       c.Stdin,
		Stdout:      c.Stdout,
		Stderr:      c.Stderr,
		Path:        c.Path,
		Env:         c.Env,
		ExtraFiles:  c.ExtraFiles,
		Args:        c.Args,
		Dir:         c.Dir,
		SysProcAttr: c.SysProcAttr,
	}
}
Exemplo n.º 16
0
func (i *info) IsRunning() bool {
	var running bool

	output, err := i.driver.getInfo(i.ID)
	if err != nil {
		log.Errorf("Error getting info for lxc container %s: %s (%s)", i.ID, err, output)
		return false
	}
	if strings.Contains(string(output), "RUNNING") {
		running = true
	}
	return running
}
Exemplo n.º 17
0
// During cleanup aufs needs to unmount all mountpoints
func (a *Driver) Cleanup() error {
	ids, err := loadIds(path.Join(a.rootPath(), "layers"))
	if err != nil {
		return err
	}

	for _, id := range ids {
		if err := a.unmount(id); err != nil {
			log.Errorf("Unmounting %s: %s", utils.TruncateID(id), err)
		}
	}

	return mountpk.Unmount(a.root)
}
Exemplo n.º 18
0
// cleanup releases any network resources allocated to the container along with any rules
// around how containers are linked together.  It also unmounts the container's root filesystem.
func (container *Container) cleanup() {
	container.releaseNetwork()

	// Disable all active links
	if container.activeLinks != nil {
		for _, link := range container.activeLinks {
			link.Disable()
		}
	}

	if err := container.Unmount(); err != nil {
		log.Errorf("%v: Failed to umount filesystem: %v", container.ID, err)
	}
}
Exemplo n.º 19
0
// GetSize, return real size, virtual size
func (container *Container) GetSize() (int64, int64) {
	var (
		sizeRw, sizeRootfs int64
		err                error
		driver             = container.daemon.driver
	)

	if err := container.Mount(); err != nil {
		log.Errorf("Warning: failed to compute size of container rootfs %s: %s", container.ID, err)
		return sizeRw, sizeRootfs
	}
	defer container.Unmount()

	if differ, ok := container.daemon.driver.(graphdriver.Differ); ok {
		sizeRw, err = differ.DiffSize(container.ID)
		if err != nil {
			log.Errorf("Warning: driver %s couldn't return diff size of container %s: %s", driver, container.ID, err)
			// FIXME: GetSize should return an error. Not changing it now in case
			// there is a side-effect.
			sizeRw = -1
		}
	} else {
		changes, _ := container.Changes()
		if changes != nil {
			sizeRw = archive.ChangesSize(container.basefs, changes)
		} else {
			sizeRw = -1
		}
	}

	if _, err = os.Stat(container.basefs); err != nil {
		if sizeRootfs, err = utils.TreeSize(container.basefs); err != nil {
			sizeRootfs = -1
		}
	}
	return sizeRw, sizeRootfs
}
Exemplo n.º 20
0
// Close closes the container's resources such as networking allocations and
// unmounts the contatiner's root filesystem
func (m *containerMonitor) Close() error {
	// Cleanup networking and mounts
	m.container.cleanup()

	// FIXME: here is race condition between two RUN instructions in Dockerfile
	// because they share same runconfig and change image. Must be fixed
	// in builder/builder.go
	if err := m.container.toDisk(); err != nil {
		log.Errorf("Error dumping container %s state to disk: %s", m.container.ID, err)

		return err
	}

	return nil
}
Exemplo n.º 21
0
func (devices *DeviceSet) deactivateDevice(info *DevInfo) error {
	log.Debugf("[devmapper] deactivateDevice(%s)", info.Hash)
	defer log.Debugf("[devmapper] deactivateDevice END")

	// Wait for the unmount to be effective,
	// by watching the value of Info.OpenCount for the device
	if err := devices.waitClose(info); err != nil {
		log.Errorf("Warning: error waiting for device %s to close: %s", info.Hash, err)
	}

	devinfo, err := getInfo(info.Name())
	if err != nil {
		return err
	}
	if devinfo.Exists != 0 {
		if err := devices.removeDeviceAndWait(info.Name()); err != nil {
			return err
		}
	}

	return nil
}
Exemplo n.º 22
0
// Write writes bytes to all writers. Failed writers will be evicted during
// this call.
func (w *BroadcastWriter) Write(p []byte) (n int, err error) {
	created := time.Now().UTC()
	w.Lock()
	if writers, ok := w.streams[""]; ok {
		for sw := range writers {
			if n, err := sw.Write(p); err != nil || n != len(p) {
				// On error, evict the writer
				delete(writers, sw)
			}
		}
	}
	w.buf.Write(p)
	for {
		line, err := w.buf.ReadString('\n')
		if err != nil {
			w.buf.Write([]byte(line))
			break
		}
		for stream, writers := range w.streams {
			if stream == "" {
				continue
			}
			b, err := json.Marshal(jsonlog.JSONLog{Log: line, Stream: stream, Created: created})
			if err != nil {
				log.Errorf("Error making JSON log line: %s", err)
				continue
			}
			b = append(b, '\n')
			for sw := range writers {
				if _, err := sw.Write(b); err != nil {
					delete(writers, sw)
				}
			}
		}
	}
	w.Unlock()
	return len(p), nil
}
Exemplo n.º 23
0
func postContainersCopy(eng *engine.Engine, version version.Version, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
	if vars == nil {
		return fmt.Errorf("Missing parameter")
	}

	var copyData engine.Env

	if contentType := r.Header.Get("Content-Type"); api.MatchesContentType(contentType, "application/json") {
		if err := copyData.Decode(r.Body); err != nil {
			return err
		}
	} else {
		return fmt.Errorf("Content-Type not supported: %s", contentType)
	}

	if copyData.Get("Resource") == "" {
		return fmt.Errorf("Path cannot be empty")
	}

	origResource := copyData.Get("Resource")

	if copyData.Get("Resource")[0] == '/' {
		copyData.Set("Resource", copyData.Get("Resource")[1:])
	}

	job := eng.Job("container_copy", vars["name"], copyData.Get("Resource"))
	job.Stdout.Add(w)
	if err := job.Run(); err != nil {
		log.Errorf("%s", err.Error())
		if strings.Contains(err.Error(), "No such container") {
			w.WriteHeader(http.StatusNotFound)
		} else if strings.Contains(err.Error(), "no such file or directory") {
			return fmt.Errorf("Could not find the file %s in container %s", origResource, vars["name"])
		}
	}
	return nil
}
Exemplo n.º 24
0
// Unmount and remove the dir information
func (a *Driver) Remove(id string) error {
	// Protect the a.active from concurrent access
	a.Lock()
	defer a.Unlock()

	if a.active[id] != 0 {
		log.Errorf("Warning: removing active id %s", id)
	}

	// Make sure the dir is umounted first
	if err := a.unmount(id); err != nil {
		return err
	}
	tmpDirs := []string{
		"mnt",
		"diff",
	}

	// Atomically remove each directory in turn by first moving it out of the
	// way (so that docker doesn't find it anymore) before doing removal of
	// the whole tree.
	for _, p := range tmpDirs {

		realPath := path.Join(a.rootPath(), p, id)
		tmpPath := path.Join(a.rootPath(), p, fmt.Sprintf("%s-removing", id))
		if err := os.Rename(realPath, tmpPath); err != nil && !os.IsNotExist(err) {
			return err
		}
		defer os.RemoveAll(tmpPath)
	}

	// Remove the layers file for the id
	if err := os.Remove(path.Join(a.rootPath(), "layers", id)); err != nil && !os.IsNotExist(err) {
		return err
	}
	return nil
}
Exemplo n.º 25
0
func httpError(w http.ResponseWriter, err error) {
	statusCode := http.StatusInternalServerError
	// FIXME: this is brittle and should not be necessary.
	// If we need to differentiate between different possible error types, we should
	// create appropriate error types with clearly defined meaning.
	if strings.Contains(err.Error(), "No such") {
		statusCode = http.StatusNotFound
	} else if strings.Contains(err.Error(), "Bad parameter") {
		statusCode = http.StatusBadRequest
	} else if strings.Contains(err.Error(), "Conflict") {
		statusCode = http.StatusConflict
	} else if strings.Contains(err.Error(), "Impossible") {
		statusCode = http.StatusNotAcceptable
	} else if strings.Contains(err.Error(), "Wrong login/password") {
		statusCode = http.StatusUnauthorized
	} else if strings.Contains(err.Error(), "hasn't been activated") {
		statusCode = http.StatusForbidden
	}

	if err != nil {
		log.Errorf("HTTP Error: statusCode=%d %s", statusCode, err.Error())
		http.Error(w, err.Error(), statusCode)
	}
}
Exemplo n.º 26
0
func (daemon *Daemon) ContainerLogs(job *engine.Job) engine.Status {
	if len(job.Args) != 1 {
		return job.Errorf("Usage: %s CONTAINER\n", job.Name)
	}

	var (
		name   = job.Args[0]
		stdout = job.GetenvBool("stdout")
		stderr = job.GetenvBool("stderr")
		tail   = job.Getenv("tail")
		follow = job.GetenvBool("follow")
		times  = job.GetenvBool("timestamps")
		lines  = -1
		format string
	)
	if !(stdout || stderr) {
		return job.Errorf("You must choose at least one stream")
	}
	if times {
		format = time.RFC3339Nano
	}
	if tail == "" {
		tail = "all"
	}
	container := daemon.Get(name)
	if container == nil {
		return job.Errorf("No such container: %s", name)
	}
	cLog, err := container.ReadLog("json")
	if err != nil && os.IsNotExist(err) {
		// Legacy logs
		log.Debugf("Old logs format")
		if stdout {
			cLog, err := container.ReadLog("stdout")
			if err != nil {
				log.Errorf("Error reading logs (stdout): %s", err)
			} else if _, err := io.Copy(job.Stdout, cLog); err != nil {
				log.Errorf("Error streaming logs (stdout): %s", err)
			}
		}
		if stderr {
			cLog, err := container.ReadLog("stderr")
			if err != nil {
				log.Errorf("Error reading logs (stderr): %s", err)
			} else if _, err := io.Copy(job.Stderr, cLog); err != nil {
				log.Errorf("Error streaming logs (stderr): %s", err)
			}
		}
	} else if err != nil {
		log.Errorf("Error reading logs (json): %s", err)
	} else {
		if tail != "all" {
			var err error
			lines, err = strconv.Atoi(tail)
			if err != nil {
				log.Errorf("Failed to parse tail %s, error: %v, show all logs", tail, err)
				lines = -1
			}
		}
		if lines != 0 {
			if lines > 0 {
				f := cLog.(*os.File)
				ls, err := tailfile.TailFile(f, lines)
				if err != nil {
					return job.Error(err)
				}
				tmp := bytes.NewBuffer([]byte{})
				for _, l := range ls {
					fmt.Fprintf(tmp, "%s\n", l)
				}
				cLog = tmp
			}
			dec := json.NewDecoder(cLog)
			for {
				l := &jsonlog.JSONLog{}

				if err := dec.Decode(l); err == io.EOF {
					break
				} else if err != nil {
					log.Errorf("Error streaming logs: %s", err)
					break
				}
				logLine := l.Log
				if times {
					logLine = fmt.Sprintf("%s %s", l.Created.Format(format), logLine)
				}
				if l.Stream == "stdout" && stdout {
					fmt.Fprintf(job.Stdout, "%s", logLine)
				}
				if l.Stream == "stderr" && stderr {
					fmt.Fprintf(job.Stderr, "%s", logLine)
				}
			}
		}
	}
	if follow {
		errors := make(chan error, 2)
		if stdout {
			stdoutPipe := container.StdoutLogPipe()
			go func() {
				errors <- jsonlog.WriteLog(stdoutPipe, job.Stdout, format)
			}()
		}
		if stderr {
			stderrPipe := container.StderrLogPipe()
			go func() {
				errors <- jsonlog.WriteLog(stderrPipe, job.Stderr, format)
			}()
		}
		err := <-errors
		if err != nil {
			log.Errorf("%s", err)
		}
	}
	return engine.StatusOK
}
Exemplo n.º 27
0
func (d *Driver) Put(id string) {
	if err := d.DeviceSet.UnmountDevice(id); err != nil {
		log.Errorf("Warning: error unmounting device %s: %s", id, err)
	}
}
Exemplo n.º 28
0
func (daemon *Daemon) ContainerAttach(job *engine.Job) engine.Status {
	if len(job.Args) != 1 {
		return job.Errorf("Usage: %s CONTAINER\n", job.Name)
	}

	var (
		name   = job.Args[0]
		logs   = job.GetenvBool("logs")
		stream = job.GetenvBool("stream")
		stdin  = job.GetenvBool("stdin")
		stdout = job.GetenvBool("stdout")
		stderr = job.GetenvBool("stderr")
	)

	container := daemon.Get(name)
	if container == nil {
		return job.Errorf("No such container: %s", name)
	}

	//logs
	if logs {
		cLog, err := container.ReadLog("json")
		if err != nil && os.IsNotExist(err) {
			// Legacy logs
			log.Debugf("Old logs format")
			if stdout {
				cLog, err := container.ReadLog("stdout")
				if err != nil {
					log.Errorf("Error reading logs (stdout): %s", err)
				} else if _, err := io.Copy(job.Stdout, cLog); err != nil {
					log.Errorf("Error streaming logs (stdout): %s", err)
				}
			}
			if stderr {
				cLog, err := container.ReadLog("stderr")
				if err != nil {
					log.Errorf("Error reading logs (stderr): %s", err)
				} else if _, err := io.Copy(job.Stderr, cLog); err != nil {
					log.Errorf("Error streaming logs (stderr): %s", err)
				}
			}
		} else if err != nil {
			log.Errorf("Error reading logs (json): %s", err)
		} else {
			dec := json.NewDecoder(cLog)
			for {
				l := &jsonlog.JSONLog{}

				if err := dec.Decode(l); err == io.EOF {
					break
				} else if err != nil {
					log.Errorf("Error streaming logs: %s", err)
					break
				}
				if l.Stream == "stdout" && stdout {
					fmt.Fprintf(job.Stdout, "%s", l.Log)
				}
				if l.Stream == "stderr" && stderr {
					fmt.Fprintf(job.Stderr, "%s", l.Log)
				}
			}
		}
	}

	//stream
	if stream {
		var (
			cStdin           io.ReadCloser
			cStdout, cStderr io.Writer
			cStdinCloser     io.Closer
		)

		if stdin {
			r, w := io.Pipe()
			go func() {
				defer w.Close()
				defer log.Debugf("Closing buffered stdin pipe")
				io.Copy(w, job.Stdin)
			}()
			cStdin = r
			cStdinCloser = job.Stdin
		}
		if stdout {
			cStdout = job.Stdout
		}
		if stderr {
			cStderr = job.Stderr
		}

		<-daemon.Attach(container, cStdin, cStdinCloser, cStdout, cStderr)

		// If we are in stdinonce mode, wait for the process to end
		// otherwise, simply return
		if container.Config.StdinOnce && !container.Config.Tty {
			container.State.WaitStop(-1 * time.Second)
		}
	}
	return engine.StatusOK
}
Exemplo n.º 29
0
// Start starts the containers process and monitors it according to the restart policy
func (m *containerMonitor) Start() error {
	var (
		err        error
		exitStatus int
	)

	// this variable indicates that we under container.Lock
	underLock := true

	// ensure that when the monitor finally exits we release the networking and unmount the rootfs
	defer func() {
		if !underLock {
			m.container.Lock()
			defer m.container.Unlock()
		}
		m.Close()
	}()

	// reset the restart count
	m.container.RestartCount = -1

	for {
		m.container.RestartCount++

		if err := m.container.startLoggingToDisk(); err != nil {
			m.resetContainer()

			return err
		}

		pipes := execdriver.NewPipes(m.container.stdin, m.container.stdout, m.container.stderr, m.container.Config.OpenStdin)

		m.container.LogEvent("start")

		m.lastStartTime = time.Now()

		if exitStatus, err = m.container.daemon.Run(m.container, pipes, m.callback); err != nil {
			// if we receive an internal error from the initial start of a container then lets
			// return it instead of entering the restart loop
			if m.container.RestartCount == 0 {
				m.resetContainer()

				return err
			}

			log.Errorf("Error running container: %s", err)
		}

		// here container.Lock is already lost
		underLock = false

		m.resetMonitor(err == nil && exitStatus == 0)

		if m.shouldRestart(exitStatus) {
			m.container.State.SetRestarting(exitStatus)

			m.container.LogEvent("die")

			m.resetContainer()

			// sleep with a small time increment between each restart to help avoid issues cased by quickly
			// restarting the container because of some types of errors ( networking cut out, etc... )
			m.waitForNextRestart()

			// we need to check this before reentering the loop because the waitForNextRestart could have
			// been terminated by a request from a user
			if m.shouldStop {
				m.container.State.SetStopped(exitStatus)

				return err
			}

			continue
		}

		m.container.State.SetStopped(exitStatus)

		m.container.LogEvent("die")

		m.resetContainer()

		break
	}

	return err
}
Exemplo n.º 30
0
func (container *Container) LogEvent(action string) {
	d := container.daemon
	if err := d.eng.Job("log", action, container.ID, d.Repositories().ImageName(container.Image)).Run(); err != nil {
		log.Errorf("Error logging event %s for %s: %s", action, container.ID, err)
	}
}