Exemplo n.º 1
0
// StatsAndLogging constructs a Statter and an AuditLogger based on its config
// parameters, and return them both. Crashes if any setup fails.
// Also sets the constructed AuditLogger as the default logger.
func StatsAndLogging(statConf StatsdConfig, logConf SyslogConfig) (metrics.Statter, blog.Logger) {
	stats, err := metrics.NewStatter(statConf.Server, statConf.Prefix)
	FailOnError(err, "Couldn't connect to statsd")

	tag := path.Base(os.Args[0])
	syslogger, err := syslog.Dial(
		"",
		"",
		syslog.LOG_INFO|syslog.LOG_LOCAL0, // default, overridden by log calls
		tag)
	FailOnError(err, "Could not connect to Syslog")
	stdoutLoglevel := int(syslog.LOG_DEBUG)
	if logConf.StdoutLevel != nil {
		stdoutLoglevel = *logConf.StdoutLevel
	}
	syslogLogLevel := int(syslog.LOG_DEBUG)
	if logConf.SyslogLevel != nil {
		syslogLogLevel = *logConf.SyslogLevel
	}
	logger, err := blog.New(syslogger, stdoutLoglevel, syslogLogLevel)
	FailOnError(err, "Could not connect to Syslog")

	_ = blog.Set(logger)
	cfsslLog.SetLogger(cfsslLogger{logger})
	_ = mysql.SetLogger(mysqlLogger{logger})

	return stats, logger
}
Exemplo n.º 2
0
// StatsAndLogging constructs a Statter and an AuditLogger based on its config
// parameters, and return them both. Crashes if any setup fails.
// Also sets the constructed AuditLogger as the default logger, and configures
// the cfssl, mysql, and grpc packages to use our logger.
// This must be called before any gRPC code is called, because gRPC's SetLogger
// doesn't use any locking.
func StatsAndLogging(statConf StatsdConfig, logConf SyslogConfig) (metrics.Statter, blog.Logger) {
	stats, err := metrics.NewStatter(statConf.Server, statConf.Prefix)
	FailOnError(err, "Couldn't connect to statsd")

	tag := path.Base(os.Args[0])
	syslogger, err := syslog.Dial(
		"",
		"",
		syslog.LOG_INFO, // default, not actually used
		tag)
	FailOnError(err, "Could not connect to Syslog")
	syslogLevel := int(syslog.LOG_INFO)
	if logConf.SyslogLevel != 0 {
		syslogLevel = logConf.SyslogLevel
	}
	logger, err := blog.New(syslogger, logConf.StdoutLevel, syslogLevel)
	FailOnError(err, "Could not connect to Syslog")

	_ = blog.Set(logger)
	cfsslLog.SetLogger(cfsslLogger{logger})
	_ = mysql.SetLogger(mysqlLogger{logger})
	grpclog.SetLogger(grpcLogger{logger})

	return stats, logger
}
Exemplo n.º 3
0
func init() {
	mysql.RegisterDial("tcp", func(addr string) (net.Conn, error) {
		return (&net.Dialer{Timeout: DialTimeout}).Dial("tcp", addr)
	})
	mysql.RegisterDial("unix", func(addr string) (net.Conn, error) {
		return (&net.Dialer{Timeout: DialTimeout}).Dial("unix", addr)
	})
	logger := log.Log.Tag("mysql").DebugLevel()
	mysql.SetLogger(logger)
}
func main() {
	var errLog = mysql.Logger(log.New(ioutil.Discard, "", 0))
	mysql.SetLogger(errLog)
	flag.Parse()
	if version == true {
		fmt.Println("MariaDB Replication Manager version", repmgrVersion)
		os.Exit(0)
	}
	if logfile != "" {
		var err error
		logPtr, err = os.Create(logfile)
		if err != nil {
			log.Println("ERROR: Error opening logfile, disabling for the rest of the session.")
			logfile = ""
		}
	}
	// if slaves option has been supplied, split into a slice.
	if hosts != "" {
		hostList = strings.Split(hosts, ",")
	} else {
		log.Fatal("ERROR: No hosts list specified.")
	}
	// validate users.
	if user == "" {
		log.Fatal("ERROR: No master user/pair specified.")
	}
	dbUser, dbPass = splitPair(user)
	if rpluser == "" {
		log.Fatal("ERROR: No replication user/pair specified.")
	}
	rplUser, rplPass = splitPair(rpluser)

	// Check that failover and switchover modes are set correctly.
	if switchover == "" && failover == "" {
		log.Fatal("ERROR: None of the switchover or failover modes are set.")
	}
	if switchover != "" && failover != "" {
		log.Fatal("ERROR: Both switchover and failover modes are set.")
	}
	if !contains(failOptions, failover) && failover != "" {
		log.Fatalf("ERROR: Incorrect failover mode: %s", failover)
	}
	if !contains(switchOptions, switchover) && switchover != "" {
		log.Fatalf("ERROR: Incorrect switchover mode: %s", switchover)
	}
	// Forced failover implies interactive == false
	if failover == "force" && interactive == true {
		interactive = false
	}

	if ignoreSrv != "" {
		ignoreList = strings.Split(ignoreSrv, ",")
	}

	// Create a connection to each host and build list of slaves.
	hostCount := len(hostList)
	servers = make([]*ServerMonitor, hostCount)
	slaveCount := 0
	for k, url := range hostList {
		var err error
		servers[k], err = newServerMonitor(url)
		if verbose {
			log.Printf("DEBUG: Creating new server: %v", servers[k].URL)
		}
		if err != nil {
			if driverErr, ok := err.(*mysql.MySQLError); ok {
				if driverErr.Number == 1045 {
					log.Fatalln("ERROR: Database access denied:", err.Error())
				}
			}
			if verbose {
				log.Println("ERROR:", err)
			}
			log.Printf("INFO : Server %s is dead.", servers[k].URL)
			servers[k].State = stateFailed
			continue
		}
		defer servers[k].Conn.Close()
		if verbose {
			log.Printf("DEBUG: Checking if server %s is slave", servers[k].URL)
		}

		servers[k].refresh()
		if servers[k].UsingGtid != "" {
			if verbose {
				log.Printf("DEBUG: Server %s is configured as a slave", servers[k].URL)
			}
			servers[k].State = stateSlave
			slaves = append(slaves, servers[k])
			slaveCount++
		} else {
			if verbose {
				log.Printf("DEBUG: Server %s is not a slave. Setting aside", servers[k].URL)
			}
			servers[k].State = stateUnconn
		}
	}

	// If no slaves are detected, then bail out
	if len(slaves) == 0 {
		log.Fatal("ERROR: No slaves were detected.")
	}

	// Check that all slave servers have the same master.
	for _, sl := range slaves {
		if sl.hasSiblings(slaves) == false {
			log.Fatalln("ERROR: Multi-master topologies are not yet supported.")
		}
	}

	// Check user privileges on live servers
	for _, sv := range servers {
		if sv.State != stateFailed {
			priv, err := dbhelper.GetPrivileges(sv.Conn, dbUser, sv.Host)
			if err != nil {
				log.Fatalf("ERROR: Error getting privileges for user %s on host %s: %s", dbUser, sv.Host, err)
			}
			if priv.Repl_client_priv == "N" {
				log.Fatalln("ERROR: User must have REPLICATION_CLIENT privilege")
			} else if priv.Repl_slave_priv == "N" {
				log.Fatalln("ERROR: User must have REPLICATION_SLAVE privilege")
			} else if priv.Super_priv == "N" {
				log.Fatalln("ERROR: User must have SUPER privilege")
			}
		}
	}

	// Depending if we are doing a failover or a switchover, we will find the master in the list of
	// dead hosts or unconnected hosts.
	if switchover != "" || failover == "monitor" {
		// First of all, get a server id from the slaves slice, they should be all the same
		sid := slaves[0].MasterServerID
		for k, s := range servers {
			if s.State == stateUnconn {
				if s.ServerID == sid {
					master = servers[k]
					master.State = stateMaster
					if verbose {
						log.Printf("DEBUG: Server %s was autodetected as a master", s.URL)
					}
					break
				}
			}
		}
	} else {
		// Slave master_host variable must point to dead master
		smh := slaves[0].MasterHost
		for k, s := range servers {
			if s.State == stateFailed {
				if s.Host == smh || s.IP == smh {
					master = servers[k]
					master.State = stateMaster
					if verbose {
						log.Printf("DEBUG: Server %s was autodetected as a master", s.URL)
					}
					break
				}
			}
		}
	}
	// Final check if master has been found
	if master == nil {
		if switchover != "" || failover == "monitor" {
			log.Fatalln("ERROR: Could not autodetect a master!")
		} else {
			log.Fatalln("ERROR: Could not autodetect a failed master!")
		}
	}

	for _, sl := range slaves {
		if verbose {
			log.Printf("DEBUG: Checking if server %s is a slave of server %s", sl.Host, master.Host)
		}
		if dbhelper.IsSlaveof(sl.Conn, sl.Host, master.IP) == false {
			log.Printf("WARN : Server %s is not a slave of declared master %s", master.URL, master.Host)
		}
	}

	// Check if preferred master is included in Host List
	ret := func() bool {
		for _, v := range hostList {
			if v == prefMaster {
				return true
			}
		}
		return false
	}
	if ret() == false && prefMaster != "" {
		log.Fatal("ERROR: Preferred master is not included in the hosts option")
	}

	// Do failover or switchover manually, or start the interactive monitor.

	if failover == "force" {
		masterFailover(true)
	} else if switchover != "" && interactive == false {
		masterFailover(false)
	} else {
		err := termbox.Init()
		if err != nil {
			log.Fatalln("Termbox initialization error", err)
		}
		_, termlength = termbox.Size()
		loglen := termlength - 9 - (hostCount * 3)
		tlog = NewTermLog(loglen)
		if failover != "" {
			tlog.Add("Monitor started in failover mode")
		} else {
			tlog.Add("Monitor started in switchover mode")
		}
		termboxChan := newTbChan()
		interval := time.Second
		ticker := time.NewTicker(interval * 1)
		for exit == false {
			select {
			case <-ticker.C:
				display()
			case event := <-termboxChan:
				switch event.Type {
				case termbox.EventKey:
					if event.Key == termbox.KeyCtrlS {
						if master.State != stateFailed || failCount > 0 {
							masterFailover(false)
						} else {
							logprint("ERROR: Master failed, cannot initiate switchover")
						}
					}
					if event.Key == termbox.KeyCtrlF {
						if master.State == stateFailed {
							masterFailover(true)
						} else {
							logprint("ERROR: Master not failed, cannot initiate failover")
						}
					}
					if event.Key == termbox.KeyCtrlD {
						for k, v := range servers {
							logprint("Servers", k, v)
						}
						logprint("Master", master)
						for k, v := range slaves {
							logprint("Slaves", k, v)
						}
					}
					if event.Key == termbox.KeyCtrlR {
						logprint("INFO: Setting slaves read-only")
						for _, sl := range slaves {
							dbhelper.SetReadOnly(sl.Conn, true)
						}
					}
					if event.Key == termbox.KeyCtrlW {
						logprint("INFO: Setting slaves read-write")
						for _, sl := range slaves {
							dbhelper.SetReadOnly(sl.Conn, false)
						}
					}
					if event.Key == termbox.KeyCtrlQ {
						exit = true
					}
				}
				switch event.Ch {
				case 's':
					termbox.Sync()
				}
			}
			if master.State == stateFailed && interactive == false {
				rem := (failoverTs + failtime) - time.Now().Unix()
				if (failtime == 0) || (failtime > 0 && (rem <= 0 || failoverCtr == 0)) {
					masterFailover(true)
					if failoverCtr == faillimit {
						exitMsg = "INFO : Failover limit reached. Exiting on failover completion."
						exit = true
					}
				} else if failtime > 0 && rem%10 == 0 {
					logprintf("WARN : Failover time limit enforced. Next failover available in %d seconds.", rem)
				}
			}
		}
		termbox.Close()
		if exitMsg != "" {
			log.Println(exitMsg)
		}
	}
}
Exemplo n.º 5
0
func main() {
	cli, err := client.NewEnvClient()
	if err != nil {
		panic(err)
	}

	options := types.ContainerListOptions{All: true}
	containers, err := cli.ContainerList(options)
	if err != nil {
		panic(err)
	}

	var container types.Container
	for _, c := range containers {
		for _, name := range c.Names {
			if strings.Contains(name, "slave-mysql") {
				container = c
				break
			}
		}
	}

	fmt.Printf("Found MySQL slave server at %v\n", container.Ports[0].IP)

	var mysqlLog = mysql.Logger(log.New(ioutil.Discard, "", 0))

	dsn := fmt.Sprintf("root:mysql@tcp(%s:3306)/docker?charset=utf8", container.Ports[0].IP)
	db, err := sql.Open("mysql", dsn)
	if err != nil {
		log.Fatal(err)
	}
	mysql.SetLogger(mysqlLog)

	// Лочим таблицы
	if _, err := db.Exec(`FLUSH TABLES WITH READ LOCK;`); err != nil {
		log.Fatal(err)
	}

	repoName := "mysql-snapshot"
	tagName := time.Now().Format("20060102-150405")

	// Сохраняем контейнер в новый образ == из diff'а файловой системы делаем новый слой
	commitOptions := types.ContainerCommitOptions{
		ContainerID:    container.ID,
		RepositoryName: repoName,
		Tag:            tagName,
		Comment:        "Snapshooter",
		Author:         "Snapshooter",
		Pause:          true,
	}
	response, err := cli.ContainerCommit(commitOptions)

	fmt.Printf("Created new image with ID %v\n", response.ID)
	if err != nil {
		log.Fatal(err)
	}

	// Разблокируем таблицы
	// TODO: [MySQL] 2016/02/04 12:15:20 packets.go:32: unexpected EOF
	if _, err := db.Exec(`UNLOCK TABLES;`); err != nil {
		log.Print(err)
	}

	fmt.Println("\nStart container by:")
	fmt.Printf("\tdocker run -d -P -e 'affinity:container==slave-mysql' %s:%s\n", repoName, tagName)
}
Exemplo n.º 6
0
func SetMysqlLogger(logger Logger) error {
	return _mysql.SetLogger(_mysql.Logger(logger))
}