//------ PCAP Print PCAP Data -----
func process_gopacket(packet gopacket.Packet) {
// Let's see if the packet is IP (even though the ether type told us)
ipLayer := packet.Layer(layers.LayerTypeIPv4)
if ipLayer != nil {
ip, _ := ipLayer.(*layers.IPv4)
register_network_call_with_redis(ip.Protocol, ip.DstIP)
}
// Check for errors
if err := packet.ErrorLayer(); err != nil {
fmt.Println("Error decoding some part of the packet:", err)
}
}
func printPacketInfo(packet gopacket.Packet) {
applicationLayer := packet.ApplicationLayer()
if applicationLayer != nil {
buff := []byte(applicationLayer.Payload())
p := rfc3164.NewParser(buff)
err := p.Parse()
if err != nil {
fmt.Println("Error decoding Payload:", err)
}
fmt.Printf("%s", p.Dump()["content"])
}
if err := packet.ErrorLayer(); err != nil {
fmt.Println("Error decoding some part of the packet:", err)
}
}
func printPacketInfo(packet gopacket.Packet) {
// Let's see if the packet is an ethernet packet
ethernetLayer := packet.Layer(layers.LayerTypeEthernet)
if ethernetLayer != nil {
fmt.Println("Ethernet layer detected.")
ethernetPacket, _ := ethernetLayer.(*layers.Ethernet)
fmt.Println("Source MAC: ", ethernetPacket.SrcMAC)
fmt.Println("Destination MAC: ", ethernetPacket.DstMAC)
// Ethernet type is typically IPv4 but could be ARP or other
fmt.Println("Ethernet type: ", ethernetPacket.EthernetType)
fmt.Println()
}
// Let's see if the packet is IP (even though the ether type told us)
ipLayer := packet.Layer(layers.LayerTypeIPv4)
if ipLayer != nil {
fmt.Println("IPv4 layer detected.")
ip, _ := ipLayer.(*layers.IPv4)
// IP layer variables:
// Version (Either 4 or 6)
// IHL (IP Header Length in 32-bit words)
// TOS, Length, Id, Flags, FragOffset, TTL, Protocol (TCP?),
// Checksum, SrcIP, DstIP
fmt.Printf("From %s to %s\n", ip.SrcIP, ip.DstIP)
fmt.Println("Protocol: ", ip.Protocol)
fmt.Println()
}
// Let's see if the packet is TCP
tcpLayer := packet.Layer(layers.LayerTypeTCP)
if tcpLayer != nil {
fmt.Println("TCP layer detected.")
tcp, _ := tcpLayer.(*layers.TCP)
// TCP layer variables:
// SrcPort, DstPort, Seq, Ack, DataOffset, Window, Checksum, Urgent
// Bool flags: FIN, SYN, RST, PSH, ACK, URG, ECE, CWR, NS
fmt.Printf("From port %d to %d\n", tcp.SrcPort, tcp.DstPort)
fmt.Println("Sequence number: ", tcp.Seq)
fmt.Println()
}
// Iterate over all layers, printing out each layer type
fmt.Println("All packet layers:")
for _, layer := range packet.Layers() {
fmt.Println("- ", layer.LayerType())
}
// When iterating through packet.Layers() above,
// if it lists Payload layer then that is the same as
// this applicationLayer. applicationLayer contains the payload
applicationLayer := packet.ApplicationLayer()
if applicationLayer != nil {
fmt.Println("Application layer/Payload found.")
fmt.Printf("%s\n", applicationLayer.Payload())
// Search for a string inside the payload
if strings.Contains(string(applicationLayer.Payload()), "HTTP") {
fmt.Println("HTTP found!")
}
}
// Check for errors
if err := packet.ErrorLayer(); err != nil {
fmt.Println("Error decoding some part of the packet:", err)
}
}
func gatherPacketLayersInfo(event common.MapStr, packet gopacket.Packet) {
// see https://godoc.org/github.com/google/gopacket#hdr-Pointers_To_Known_Layers
// Pointers To Known Layers:
// During decoding, certain layers are stored in the packet as well-known layer types.
// For example, IPv4 and IPv6 are both considered NetworkLayer layers,
// while TCP and UDP are both TransportLayer layers.
// We support 4 layers, corresponding to the 4 layers of the TCP/IP layering scheme
// (roughly anagalous to layers 2, 3, 4, and 7 of the OSI model).
// To access these, you can use the:
// packet.LinkLayer,
// packet.NetworkLayer,
// packet.TransportLayer, and
// packet.ApplicationLayer functions.
// Each of these functions returns a corresponding interface (gopacket.{Link,Network,Transport,Application}Layer).
// The first three provide methods for getting src/dst addresses for that particular layer,
// while the final layer provides a Payload function to get payload data.
// use "packet.Dump()" as a fail-safe to capture all available layers for a packet,
// just in case we encounter something unexpected in the unified2 file or we
// have neglected to handle a particular layer explicitly
event["packet_dump"] = packet.Dump()
// "packet.Dump()" is very verbose, i.e. a large amount of text, but that's ok
// capture the name of the layers found
var packet_layers []string
for _, layer := range packet.Layers() {
packet_layers = append(packet_layers, fmt.Sprintf("%v", layer.LayerType()))
}
event["packet_layers"] = packet_layers
// Ethernet layer?
ethernetLayer := packet.Layer(layers.LayerTypeEthernet)
if ethernetLayer != nil {
ethernetPacket, _ := ethernetLayer.(*layers.Ethernet)
event["ethernet_src_mac"] = fmt.Sprintf("%v", ethernetPacket.SrcMAC)
event["ethernet_dst_mac"] = fmt.Sprintf("%v", ethernetPacket.DstMAC)
// ethernet type is typically IPv4 but could be ARP or other
event["ethernet_type"] = fmt.Sprintf("%v", ethernetPacket.EthernetType)
// Length is only set if a length field exists within this header. Ethernet
// headers follow two different standards, one that uses an EthernetType, the
// other which defines a length the follows with a LLC header (802.3). If the
// former is the case, we set EthernetType and Length stays 0. In the latter
// case, we set Length and EthernetType = EthernetTypeLLC.
event["ethernet_length"] = fmt.Sprintf("%v", ethernetPacket.Length)
}
// IPv4 layer?
ipLayer := packet.Layer(layers.LayerTypeIPv4)
if ipLayer != nil {
ip, _ := ipLayer.(*layers.IPv4)
event["ip_version"] = ip.Version
event["ip_ihl"] = ip.IHL
event["ip_tos"] = ip.TOS
event["ip_length"] = ip.Length
event["ip_id"] = ip.Id
event["ip_flags"] = ip.Flags
event["ip_fragoffset"] = ip.FragOffset
event["ip_ttl"] = ip.TTL
event["ip_protocol"] = ip.Protocol
event["ip_checksum"] = ip.Checksum
event["ip_src_ip"] = ip.SrcIP
event["ip_dst_ip"] = ip.DstIP
event["ip_options"] = ip.Options // maybe? fmt.Sprintf("%v", ip.Options)
event["ip_padding"] = ip.Padding
}
// IPv6 layer?
ip6Layer := packet.Layer(layers.LayerTypeIPv6)
if ip6Layer != nil {
ip6, _ := ip6Layer.(*layers.IPv6)
event["ip6_version"] = ip6.Version
event["ip6_trafficclass"] = ip6.TrafficClass
event["ip6_flowlabel"] = ip6.FlowLabel
event["ip6_length"] = ip6.Length
event["ip6_nextheader"] = ip6.NextHeader
event["ip6_hoplimit"] = ip6.HopLimit
event["ip6_src_ip"] = ip6.SrcIP
event["ip6_dst_ip"] = ip6.DstIP
event["ip6_hopbyhop"] = ip6.HopByHop
}
// see: gopacket/layers folder ... what layers are needed for Snort/Suricata alerts?
// ICMPv4 layer?
// ICMPv6 layer?
// ARP layer?
// UDP layer?
udpLayer := packet.Layer(layers.LayerTypeUDP)
if udpLayer != nil {
udp, _ := udpLayer.(*layers.UDP)
event["udp_src_port"] = udp.SrcPort
event["udp_dst_port"] = udp.DstPort
event["udp_length"] = udp.Length
event["udp_checksum"] = udp.Checksum
}
// TCP layer?
tcpLayer := packet.Layer(layers.LayerTypeTCP)
if tcpLayer != nil {
tcp, _ := tcpLayer.(*layers.TCP)
event["tcp_src_port"] = tcp.SrcPort
event["tcp_dst_port"] = tcp.DstPort
event["tcp_seq"] = tcp.Seq
event["tcp_ack"] = tcp.Ack
event["tcp_data_offset"] = tcp.DataOffset
event["tcp_fin"] = tcp.FIN
event["tcp_syn"] = tcp.SYN
event["tcp_rst"] = tcp.RST
event["tcp_psh"] = tcp.PSH
event["tcp_ack"] = tcp.ACK
event["tcp_urg"] = tcp.URG
event["tcp_ece"] = tcp.ECE
event["tcp_cwr"] = tcp.CWR
event["tcp_ns"] = tcp.NS
event["tcp_window"] = tcp.Window
event["tcp_checksum"] = tcp.Checksum
event["tcp_urgent"] = tcp.Urgent
event["tcp_options"] = tcp.Options // maybe? fmt.Sprintf("%v", tcp.Options)
event["tcp_padding"] = tcp.Padding
}
// note: the Payload layer is the same as this applicationLayer
// also, we can get payloads for all packets regardless of their underlying data type:
// application layer? (aka packet payload)
applicationLayer := packet.ApplicationLayer()
if applicationLayer != nil {
event["packet_payload"] = fmt.Sprintf("%s", applicationLayer.Payload())
}
// errors?
if err := packet.ErrorLayer(); err != nil {
event["packet_error"] = fmt.Sprintf("Packet decoding error: %v", err)
}
}
//------ PCAP Print PCAP Data -----
func process_gopacket(packet gopacket.Packet) {
ethernetLayer := packet.Layer(layers.LayerTypeEthernet)
if ethernetLayer != nil {
ethernetPacket, _ := ethernetLayer.(*layers.Ethernet)
fmt.Printf("Ethernet layer | Type: %s | Src_MAC: %s Dst_MAC: %s\n", ethernetPacket.EthernetType, ethernetPacket.SrcMAC, ethernetPacket.DstMAC)
// Ethernet type is typically IPv4 but could be ARP or other
}
// Let's see if the packet is IP (even though the ether type told us)
ipLayer := packet.Layer(layers.LayerTypeIPv4)
if ipLayer != nil {
ip, _ := ipLayer.(*layers.IPv4)
// fmt.Printf("\tIPv4 | %s | Src: %s Dest: %s \n", ip.Protocol, ip.SrcIP, ip.DstIP)
// IP layer variables:
// Version (Either 4 or 6)
// IHL (IP Header Length in 32-bit words)
// TOS, Length, Id, Flags, FragOffset, TTL, Protocol (TCP?),
// Checksum, SrcIP, DstIP
//
register_network_call_with_redis(ip.Protocol, ip.SrcIP, ip.DstIP)
}
// Let's see if the packet is TCP
tcpLayer := packet.Layer(layers.LayerTypeTCP)
if tcpLayer != nil {
tcp, _ := tcpLayer.(*layers.TCP)
fmt.Printf("\tTCP | From port %d to %d", tcp.SrcPort, tcp.DstPort)
fmt.Println("| TCP Seq: ", tcp.Seq)
// TCP layer variables:
// SrcPort, DstPort, Seq, Ack, DataOffset, Window, Checksum, Urgent
// Bool flags: FIN, SYN, RST, PSH, ACK, URG, ECE, CWR, NS
}
// dnsLayer := packet.Layer(layers.LayerTypeDNS)
// if dnsLayer != nil {
// dns, _ := dnsLayer.(*layers.DNS)
// fmt.Println(dns)
// }
// // Iterate over all layers, printing out each layer type
// fmt.Println("All packet layers:")
// for _, layer := range packet.Layers() {
// fmt.Println("- ", layer.LayerType())
// }
// When iterating through packet.Layers() above,
// if it lists Payload layer then that is the same as
// this applicationLayer. applicationLayer contains the payload
// applicationLayer := packet.ApplicationLayer()
// if applicationLayer != nil {
// fmt.Println("Application layer/Payload found.")
// fmt.Printf("%s\n", applicationLayer.Payload())
// // Search for a string inside the payload
// if strings.Contains(string(applicationLayer.Payload()), "HTTP") {
// fmt.Println("HTTP found!")
// }
// }
// Check for errors
if err := packet.ErrorLayer(); err != nil {
fmt.Println("Error decoding some part of the packet:", err)
}
}
