Exemplo n.º 1
0
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
// See the docs for gopacket.SerializableLayer for more info.
func (eth *VxlanEthernet) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	if len(eth.DstMAC) != 6 {
		return fmt.Errorf("invalid dst MAC: %v", eth.DstMAC)
	}
	if len(eth.SrcMAC) != 6 {
		return fmt.Errorf("invalid src MAC: %v", eth.SrcMAC)
	}
	payload := b.Bytes()
	bytes, err := b.PrependBytes(14)
	if err != nil {
		return err
	}
	copy(bytes, eth.DstMAC)
	copy(bytes[6:], eth.SrcMAC)
	if eth.Length != 0 || eth.EthernetType == EthernetTypeLLC {
		if opts.FixLengths {
			eth.Length = uint16(len(payload))
		}
		if eth.EthernetType != EthernetTypeLLC {
			return fmt.Errorf("ethernet type %v not compatible with length value %v", eth.EthernetType, eth.Length)
		} else if eth.Length > 0x0600 {
			return fmt.Errorf("invalid ethernet length %v", eth.Length)
		}
		binary.BigEndian.PutUint16(bytes[12:], eth.Length)
	} else {
		binary.BigEndian.PutUint16(bytes[12:], uint16(eth.EthernetType))
	}
	return nil
}
Exemplo n.º 2
0
Arquivo: ip6.go Projeto: hgGeorg/mongo
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
// See the docs for gopacket.SerializableLayer for more info.
func (i *IPv6Destination) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	var bytes []byte
	var err error

	o := make([]*ipv6HeaderTLVOption, 0, len(i.Options))
	for _, v := range i.Options {
		o = append(o, (*ipv6HeaderTLVOption)(v))
	}

	l := serializeIPv6HeaderTLVOptions(nil, o, opts.FixLengths)
	bytes, err = b.PrependBytes(l)
	if err != nil {
		return err
	}
	serializeIPv6HeaderTLVOptions(bytes, o, opts.FixLengths)

	length := len(bytes) + 2
	if length%8 != 0 {
		return fmt.Errorf("IPv6Destination actual length must be multiple of 8")
	}
	bytes, err = b.PrependBytes(2)
	if err != nil {
		return err
	}
	bytes[0] = uint8(i.NextHeader)
	if opts.FixLengths {
		i.HeaderLength = uint8((length / 8) - 1)
	}
	bytes[1] = uint8(i.HeaderLength)
	return nil
}
Exemplo n.º 3
0
// SerializeTo is for gopacket.SerializableLayer.
func (sc SCTPData) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	length := 16 + len(sc.PayloadData)
	bytes, err := b.PrependBytes(roundUpToNearest4(length))
	if err != nil {
		return err
	}
	bytes[0] = uint8(sc.Type)
	flags := uint8(0)
	if sc.Unordered {
		flags |= 0x4
	}
	if sc.BeginFragment {
		flags |= 0x2
	}
	if sc.EndFragment {
		flags |= 0x1
	}
	bytes[1] = flags
	binary.BigEndian.PutUint16(bytes[2:4], uint16(length))
	binary.BigEndian.PutUint32(bytes[4:8], sc.TSN)
	binary.BigEndian.PutUint16(bytes[8:10], sc.StreamId)
	binary.BigEndian.PutUint16(bytes[10:12], sc.StreamSequence)
	binary.BigEndian.PutUint32(bytes[12:16], sc.PayloadProtocol)
	copy(bytes[16:], sc.PayloadData)
	return nil
}
Exemplo n.º 4
0
Arquivo: arp.go Projeto: hgGeorg/mongo
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
// See the docs for gopacket.SerializableLayer for more info.
func (arp *ARP) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	size := 8 + len(arp.SourceHwAddress) + len(arp.SourceProtAddress) + len(arp.DstHwAddress) + len(arp.DstProtAddress)
	bytes, err := b.PrependBytes(size)
	if err != nil {
		return err
	}
	if opts.FixLengths {
		if len(arp.SourceHwAddress) != len(arp.DstHwAddress) {
			return fmt.Errorf("mismatched hardware address sizes")
		}
		arp.HwAddressSize = uint8(len(arp.SourceHwAddress))
		if len(arp.SourceProtAddress) != len(arp.DstProtAddress) {
			return fmt.Errorf("mismatched prot address sizes")
		}
		arp.ProtAddressSize = uint8(len(arp.SourceProtAddress))
	}
	binary.BigEndian.PutUint16(bytes, uint16(arp.AddrType))
	binary.BigEndian.PutUint16(bytes[2:], uint16(arp.Protocol))
	bytes[4] = arp.HwAddressSize
	bytes[5] = arp.ProtAddressSize
	binary.BigEndian.PutUint16(bytes[6:], arp.Operation)
	start := 8
	for _, addr := range [][]byte{
		arp.SourceHwAddress,
		arp.SourceProtAddress,
		arp.DstHwAddress,
		arp.DstProtAddress,
	} {
		copy(bytes[start:], addr)
		start += len(addr)
	}
	return nil
}
Exemplo n.º 5
0
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
// See the docs for gopacket.SerializableLayer for more info.
func (u *UDP) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	payload := b.Bytes()
	bytes, err := b.PrependBytes(8)
	if err != nil {
		return err
	}
	binary.BigEndian.PutUint16(bytes, uint16(u.SrcPort))
	binary.BigEndian.PutUint16(bytes[2:], uint16(u.DstPort))
	if opts.FixLengths {
		u.Length = uint16(len(payload)) + 8
	}
	binary.BigEndian.PutUint16(bytes[4:], u.Length)
	if opts.ComputeChecksums {
		// zero out checksum bytes
		bytes[6] = 0
		bytes[7] = 0
		csum, err := u.computeChecksum(b.Bytes(), IPProtocolUDP)
		if err != nil {
			return err
		}
		u.Checksum = csum
	}
	binary.BigEndian.PutUint16(bytes[6:], u.Checksum)
	return nil
}
Exemplo n.º 6
0
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
// See the docs for gopacket.SerializableLayer for more info.
func (i *IPv6Destination) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	optionLength := 0
	for _, opt := range i.Options {
		l, err := opt.serializeTo(b, opts.FixLengths)
		if err != nil {
			return err
		}
		optionLength += l
	}
	bytes, err := b.PrependBytes(2)
	if err != nil {
		return err
	}
	bytes[0] = uint8(i.NextHeader)
	if opts.FixLengths {
		if optionLength <= 0 {
			return fmt.Errorf("cannot serialize empty IPv6Destination")
		}
		length := optionLength + 2
		if length%8 != 0 {
			return fmt.Errorf("IPv6Destination actual length must be multiple of 8 (check TLV alignment)")
		}
		i.HeaderLength = uint8((length / 8) - 1)
	}
	bytes[1] = i.HeaderLength
	return nil
}
Exemplo n.º 7
0
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
// See the docs for gopacket.SerializableLayer for more info.
func (ip6 *IPv6) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	payload := b.Bytes()
	if ip6.HopByHop != nil {
		return fmt.Errorf("unable to serialize hopbyhop for now")
	}
	bytes, err := b.PrependBytes(40)
	if err != nil {
		return err
	}
	bytes[0] = (ip6.Version << 4) | (ip6.TrafficClass >> 4)
	bytes[1] = (ip6.TrafficClass << 4) | uint8(ip6.FlowLabel>>16)
	binary.BigEndian.PutUint16(bytes[2:], uint16(ip6.FlowLabel))
	if opts.FixLengths {
		ip6.Length = uint16(len(payload))
	}
	binary.BigEndian.PutUint16(bytes[4:], ip6.Length)
	bytes[6] = byte(ip6.NextHeader)
	bytes[7] = byte(ip6.HopLimit)
	if err := ip6.AddressTo16(); err != nil {
		return err
	}
	copy(bytes[8:], ip6.SrcIP)
	copy(bytes[24:], ip6.DstIP)
	return nil
}
Exemplo n.º 8
0
// SerializeTo is for gopacket.SerializableLayer.
func (sc SCTPData) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	payload := b.Bytes()
	// Pad the payload to a 32 bit boundary
	if rem := len(payload) % 4; rem != 0 {
		b.AppendBytes(4 - rem)
	}
	length := 16
	bytes, err := b.PrependBytes(length)
	if err != nil {
		return err
	}
	bytes[0] = uint8(sc.Type)
	flags := uint8(0)
	if sc.Unordered {
		flags |= 0x4
	}
	if sc.BeginFragment {
		flags |= 0x2
	}
	if sc.EndFragment {
		flags |= 0x1
	}
	bytes[1] = flags
	binary.BigEndian.PutUint16(bytes[2:4], uint16(length+len(payload)))
	binary.BigEndian.PutUint32(bytes[4:8], sc.TSN)
	binary.BigEndian.PutUint16(bytes[8:10], sc.StreamId)
	binary.BigEndian.PutUint16(bytes[10:12], sc.StreamSequence)
	binary.BigEndian.PutUint32(bytes[12:16], uint32(sc.PayloadProtocol))
	return nil
}
Exemplo n.º 9
0
// SerializeTo is for gopacket.SerializableLayer.
func (s SCTPUnknownChunkType) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	bytes, err := b.PrependBytes(s.ActualLength)
	if err != nil {
		return err
	}
	copy(bytes, s.bytes)
	return nil
}
Exemplo n.º 10
0
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
func (l *Loopback) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	bytes, err := b.PrependBytes(4)
	if err != nil {
		return err
	}
	binary.LittleEndian.PutUint32(bytes, uint32(l.Family))
	return nil
}
Exemplo n.º 11
0
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
// See the docs for gopacket.SerializableLayer for more info.
func (s *SlowProtocol) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	bytes, err := b.PrependBytes(1)
	if err != nil {
		return err
	}
	bytes[0] = uint8(s.SubType)
	return nil
}
Exemplo n.º 12
0
func (m *MoldUDP64) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) (err error) {
	defer errs.PassE(&err)
	bytes, err := b.PrependBytes(20)
	errs.CheckE(err)
	copy(bytes[0:10], m.Session[0:10])
	binary.BigEndian.PutUint64(bytes[10:18], m.SequenceNumber)
	binary.BigEndian.PutUint16(bytes[18:20], m.MessageCount)
	return
}
Exemplo n.º 13
0
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
// See the docs for gopacket.SerializableLayer for more info.
func (t *TCP) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	var optionLength int
	for _, o := range t.Options {
		switch o.OptionType {
		case 0, 1:
			optionLength += 1
		default:
			optionLength += 2 + len(o.OptionData)
		}
	}
	if opts.FixLengths {
		if rem := optionLength % 4; rem != 0 {
			t.Padding = lotsOfZeros[:4-rem]
		}
		t.DataOffset = uint8((len(t.Padding) + optionLength + 20) / 4)
	}
	bytes, err := b.PrependBytes(20 + optionLength + len(t.Padding))
	if err != nil {
		return err
	}
	binary.BigEndian.PutUint16(bytes, uint16(t.SrcPort))
	binary.BigEndian.PutUint16(bytes[2:], uint16(t.DstPort))
	binary.BigEndian.PutUint32(bytes[4:], t.Seq)
	binary.BigEndian.PutUint32(bytes[8:], t.Ack)
	binary.BigEndian.PutUint16(bytes[12:], t.flagsAndOffset())
	binary.BigEndian.PutUint16(bytes[14:], t.Window)
	binary.BigEndian.PutUint16(bytes[18:], t.Urgent)
	start := 20
	for _, o := range t.Options {
		bytes[start] = byte(o.OptionType)
		switch o.OptionType {
		case 0, 1:
			start++
		default:
			if opts.FixLengths {
				o.OptionLength = uint8(len(o.OptionData) + 2)
			}
			bytes[start+1] = o.OptionLength
			copy(bytes[start+2:start+len(o.OptionData)+2], o.OptionData)
			start += int(o.OptionLength)
		}
	}
	copy(bytes[start:], t.Padding)
	if opts.ComputeChecksums {
		// zero out checksum bytes in current serialization.
		bytes[16] = 0
		bytes[17] = 0
		csum, err := t.computeChecksum(b.Bytes(), IPProtocolTCP)
		if err != nil {
			return err
		}
		t.Checksum = csum
	}
	binary.BigEndian.PutUint16(bytes[16:], t.Checksum)
	return nil
}
Exemplo n.º 14
0
// SerializeTo is for gopacket.SerializableLayer.
func (sc SCTPEmptyLayer) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	bytes, err := b.PrependBytes(4)
	if err != nil {
		return err
	}
	bytes[0] = uint8(sc.Type)
	bytes[1] = sc.Flags
	binary.BigEndian.PutUint16(bytes[2:4], 4)
	return nil
}
Exemplo n.º 15
0
func (m *MoldUDP64MessageBlockChained) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) (err error) {
	defer errs.PassE(&err)
	payload := b.Bytes()
	bytes, err := b.PrependBytes(2)
	errs.CheckE(err)
	if opts.FixLengths {
		m.MessageLength = uint16(len(payload))
	}
	binary.BigEndian.PutUint16(bytes, uint16(m.MessageLength))
	return
}
Exemplo n.º 16
0
func (self Lwapp) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	bytes, err := b.PrependBytes(6)
	if err != nil {
		return err
	}
	bytes[0] = uint8(self.Flags)
	bytes[1] = self.FragID
	binary.BigEndian.PutUint16(bytes[2:], uint16(len(self.Payload)))
	binary.BigEndian.PutUint16(bytes[4:], self.StatusWLANs)
	return nil
}
Exemplo n.º 17
0
// SerializeTo is for gopacket.SerializableLayer.
func (sc SCTPShutdown) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	bytes, err := b.PrependBytes(8)
	if err != nil {
		return err
	}
	bytes[0] = uint8(sc.Type)
	bytes[1] = sc.Flags
	binary.BigEndian.PutUint16(bytes[2:4], 8)
	binary.BigEndian.PutUint32(bytes[4:8], sc.CumulativeTSNAck)
	return nil
}
Exemplo n.º 18
0
func (m Dot11MgmtDeauthentication) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	buf, err := b.PrependBytes(2)

	if err != nil {
		return err
	}

	binary.LittleEndian.PutUint16(buf[0:2], uint16(m.Reason))

	return nil
}
Exemplo n.º 19
0
func (self LwappControl) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	bytes, err := b.PrependBytes(8)
	if err != nil {
		return err
	}
	bytes[0] = self.MessageType
	bytes[1] = self.SeqNum
	binary.BigEndian.PutUint16(bytes[2:], uint16(len(self.Payload)))
	binary.BigEndian.PutUint32(bytes[4:], self.SessionID)
	return nil
}
Exemplo n.º 20
0
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
func (ip *IPv4) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	optionLength := ip.getIPv4OptionSize()
	bytes, err := b.PrependBytes(20 + int(optionLength))
	if err != nil {
		return err
	}
	if opts.FixLengths {
		ip.IHL = 5 + (optionLength / 4)
		ip.Length = uint16(len(b.Bytes()))
	}
	bytes[0] = (ip.Version << 4) | ip.IHL
	bytes[1] = ip.TOS
	binary.BigEndian.PutUint16(bytes[2:], ip.Length)
	binary.BigEndian.PutUint16(bytes[4:], ip.Id)
	binary.BigEndian.PutUint16(bytes[6:], ip.flagsfrags())
	bytes[8] = ip.TTL
	bytes[9] = byte(ip.Protocol)
	if err := ip.AddressTo4(); err != nil {
		return err
	}
	copy(bytes[12:16], ip.SrcIP)
	copy(bytes[16:20], ip.DstIP)

	curLocation := 20
	// Now, we will encode the options
	for _, opt := range ip.Options {
		switch opt.OptionType {
		case 0:
			// this is the end of option lists
			bytes[curLocation] = 0
			curLocation++
		case 1:
			// this is the padding
			bytes[curLocation] = 1
			curLocation++
		default:
			bytes[curLocation] = opt.OptionType
			bytes[curLocation+1] = opt.OptionLength

			// sanity checking to protect us from buffer overrun
			if len(opt.OptionData) > int(opt.OptionLength-2) {
				return fmt.Errorf("option length is smaller than length of option data")
			}
			copy(bytes[curLocation+2:curLocation+int(opt.OptionLength)], opt.OptionData)
			curLocation += int(opt.OptionLength)
		}
	}

	if opts.ComputeChecksums {
		ip.Checksum = checksum(bytes)
	}
	binary.BigEndian.PutUint16(bytes[10:], ip.Checksum)
	return nil
}
Exemplo n.º 21
0
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
// See the docs for gopacket.SerializableLayer for more info.
func (l *BPDUTopology) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	bytes, err := b.PrependBytes(BPDUTopologyLength)
	if err != nil {
		fmt.Println("Error in Serialize to for BPDU Topology")
		return err
	}
	binary.BigEndian.PutUint16(bytes[0:], l.ProtocolId)
	bytes[2] = byte(l.ProtocolVersionId)
	bytes[3] = byte(l.BPDUType)
	return nil
}
Exemplo n.º 22
0
func (m Dot11InformationElement) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	length := len(m.Info) + len(m.OUI)
	if buf, err := b.PrependBytes(2 + length); err != nil {
		return err
	} else {
		buf[0] = uint8(m.ID)
		buf[1] = uint8(length)
		copy(buf[2:], m.OUI)
		copy(buf[2+len(m.OUI):], m.Info)
	}
	return nil
}
Exemplo n.º 23
0
func (m Dot11MgmtAssociationReq) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	buf, err := b.PrependBytes(4)

	if err != nil {
		return err
	}

	binary.LittleEndian.PutUint16(buf[0:2], m.CapabilityInfo)
	binary.LittleEndian.PutUint16(buf[2:4], m.ListenInterval)

	return nil
}
Exemplo n.º 24
0
// SerializeTo is for gopacket.SerializableLayer.
func (sc SCTPCookieEcho) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	length := 4 + len(sc.Cookie)
	bytes, err := b.PrependBytes(roundUpToNearest4(length))
	if err != nil {
		return err
	}
	bytes[0] = uint8(sc.Type)
	bytes[1] = sc.Flags
	binary.BigEndian.PutUint16(bytes[2:4], uint16(length))
	copy(bytes[4:], sc.Cookie)
	return nil
}
Exemplo n.º 25
0
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
// See the docs for gopacket.SerializableLayer for more info.
func (s *SNAP) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	if buf, err := b.PrependBytes(5); err != nil {
		return err
	} else {
		buf[0] = s.OrganizationalCode[0]
		buf[1] = s.OrganizationalCode[1]
		buf[2] = s.OrganizationalCode[2]
		binary.BigEndian.PutUint16(buf[3:5], uint16(s.Type))
	}

	return nil
}
Exemplo n.º 26
0
func (m Dot11MgmtAuthentication) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	buf, err := b.PrependBytes(6)

	if err != nil {
		return err
	}

	binary.LittleEndian.PutUint16(buf[0:2], uint16(m.Algorithm))
	binary.LittleEndian.PutUint16(buf[2:4], m.Sequence)
	binary.LittleEndian.PutUint16(buf[4:6], uint16(m.Status))

	return nil
}
Exemplo n.º 27
0
func (m Dot11MgmtBeacon) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	buf, err := b.PrependBytes(12)

	if err != nil {
		return err
	}

	binary.LittleEndian.PutUint64(buf[0:8], m.Timestamp)
	binary.LittleEndian.PutUint16(buf[8:10], m.Interval)
	binary.LittleEndian.PutUint16(buf[10:12], m.Flags)

	return nil
}
Exemplo n.º 28
0
func (m Dot11MgmtAssociationResp) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	buf, err := b.PrependBytes(6)

	if err != nil {
		return err
	}

	binary.LittleEndian.PutUint16(buf[0:2], m.CapabilityInfo)
	binary.LittleEndian.PutUint16(buf[2:4], uint16(m.Status))
	binary.LittleEndian.PutUint16(buf[4:6], m.AID)

	return nil
}
Exemplo n.º 29
0
func (h *ipv6HeaderTLVOption) serializeTo(b gopacket.SerializeBuffer, fixLengths bool) (int, error) {
	if fixLengths {
		h.OptionLength = uint8(len(h.OptionData))
	}
	length := int(h.OptionLength) + 2
	data, err := b.PrependBytes(length)
	if err != nil {
		return 0, err
	}
	data[0] = h.OptionType
	data[1] = h.OptionLength
	copy(data[2:], h.OptionData)
	return length, nil
}
Exemplo n.º 30
0
// SerializeTo writes the serialized form of this layer into the
// SerializationBuffer, implementing gopacket.SerializableLayer.
// See the docs for gopacket.SerializableLayer for more info.
func (m *MPLS) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
	bytes, err := b.PrependBytes(4)
	if err != nil {
		return err
	}
	encoded := m.Label << 12
	encoded |= uint32(m.TrafficClass) << 9
	encoded |= uint32(m.TTL)
	if m.StackBottom {
		encoded |= 0x100
	}
	binary.BigEndian.PutUint32(bytes, encoded)
	return nil
}