// DefaultClientConfig creates a clientcmd.ClientConfig with the following hierarchy:
// 1. Use the kubeconfig builder. The number of merges and overrides here gets a little crazy. Stay with me.
// 1. Merge together the kubeconfig itself. This is done with the following hierarchy rules:
// 1. CommandLineLocation - this parsed from the command line, so it must be late bound. If you specify this,
// then no other kubeconfig files are merged. This file must exist.
// 2. If $KUBECONFIG is set, then it is treated as a list of files that should be merged.
// 3. HomeDirectoryLocation
// Empty filenames are ignored. Files with non-deserializable content produced errors.
// The first file to set a particular value or map key wins and the value or map key is never changed.
// This means that the first file to set CurrentContext will have its context preserved. It also means
// that if two files specify a "red-user", only values from the first file's red-user are used. Even
// non-conflicting entries from the second file's "red-user" are discarded.
// 2. Determine the context to use based on the first hit in this chain
// 1. command line argument - again, parsed from the command line, so it must be late bound
// 2. CurrentContext from the merged kubeconfig file
// 3. Empty is allowed at this stage
// 3. Determine the cluster info and auth info to use. At this point, we may or may not have a context. They
// are built based on the first hit in this chain. (run it twice, once for auth, once for cluster)
// 1. command line argument
// 2. If context is present, then use the context value
// 3. Empty is allowed
// 4. Determine the actual cluster info to use. At this point, we may or may not have a cluster info. Build
// each piece of the cluster info based on the chain:
// 1. command line argument
// 2. If cluster info is present and a value for the attribute is present, use it.
// 3. If you don't have a server location, bail.
// 5. Auth info is build using the same rules as cluster info, EXCEPT that you can only have one authentication
// technique per auth info. The following conditions result in an error:
// 1. If there are two conflicting techniques specified from the command line, fail.
// 2. If the command line does not specify one, and the auth info has conflicting techniques, fail.
// 3. If the command line specifies one and the auth info specifies another, honor the command line technique.
// 2. Use default values and potentially prompt for auth information
//
// However, if it appears that we're running in a kubernetes cluster
// container environment, then run with the auth info kubernetes mounted for
// us. Specifically:
// The env vars KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT are
// set, and the file /var/run/secrets/kubernetes.io/serviceaccount/token
// exists and is not a directory.
func DefaultClientConfig(flags *pflag.FlagSet) clientcmd.ClientConfig {
loadingRules := clientcmd.NewDefaultClientConfigLoadingRules()
flags.StringVar(&loadingRules.ExplicitPath, "kubeconfig", "", "Path to the kubeconfig file to use for CLI requests.")
overrides := &clientcmd.ConfigOverrides{}
flagNames := clientcmd.RecommendedConfigOverrideFlags("")
// short flagnames are disabled by default. These are here for compatibility with existing scripts
flagNames.ClusterOverrideFlags.APIServer.ShortName = "s"
clientcmd.BindOverrideFlags(overrides, flags, flagNames)
clientConfig := clientcmd.NewInteractiveDeferredLoadingClientConfig(loadingRules, overrides, os.Stdin)
return clientConfig
}
func NewDefaultPathOptions() *PathOptions {
ret := &PathOptions{
GlobalFile: clientcmd.RecommendedHomeFile,
EnvVar: clientcmd.RecommendedConfigPathEnvVar,
ExplicitFileFlag: clientcmd.RecommendedConfigPathFlag,
GlobalFileSubpath: clientcmd.RecommendedHomeFileName,
LoadingRules: clientcmd.NewDefaultClientConfigLoadingRules(),
}
ret.LoadingRules.DoNotResolvePaths = true
return ret
}
// getStartingConfig returns the Config object built from the sources specified by the options, the filename read (only if it was a single file), and an error if something goes wrong
func (o *viewOptions) getStartingConfig() (*clientcmdapi.Config, string, error) {
switch {
case o.merge.Value():
loadingRules := clientcmd.NewDefaultClientConfigLoadingRules()
loadingRules.ExplicitPath = o.pathOptions.specifiedFile
overrides := &clientcmd.ConfigOverrides{}
clientConfig := clientcmd.NewNonInteractiveDeferredLoadingClientConfig(loadingRules, overrides)
config, err := clientConfig.RawConfig()
if err != nil {
return nil, "", fmt.Errorf("Error getting config: %v", err)
}
return &config, "", nil
default:
return o.pathOptions.getStartingConfig()
}
}
// NewEnviromentConfig sets up the initial config from environment variables
func NewEnviromentConfig() (*Config, error) {
config := NewDefaultConfig()
home := os.Getenv("GIT_HOME")
if len(home) == 0 {
return nil, fmt.Errorf("GIT_HOME is required")
}
abs, err := filepath.Abs(home)
if err != nil {
return nil, fmt.Errorf("can't make %q absolute: %v", home, err)
}
if stat, err := os.Stat(abs); err != nil || !stat.IsDir() {
return nil, fmt.Errorf("GIT_HOME must be an existing directory: %v", err)
}
config.Home = home
if publicURL := os.Getenv("PUBLIC_URL"); len(publicURL) > 0 {
valid, err := url.Parse(publicURL)
if err != nil {
return nil, fmt.Errorf("PUBLIC_URL must be a valid URL: %v", err)
}
config.URL = valid
}
gitpath := os.Getenv("GIT_PATH")
if len(gitpath) == 0 {
path, err := exec.LookPath("git")
if err != nil {
return nil, fmt.Errorf("could not find 'git' in PATH; specify GIT_PATH or set your PATH")
}
gitpath = path
}
config.GitBinary = gitpath
config.AllowPush = os.Getenv("ALLOW_GIT_PUSH") != "no"
config.AllowHooks = os.Getenv("ALLOW_GIT_HOOKS") != "no"
config.AllowLazyCreate = os.Getenv("ALLOW_LAZY_CREATE") != "no"
if hookpath := os.Getenv("HOOK_PATH"); len(hookpath) != 0 {
path, err := filepath.Abs(hookpath)
if err != nil {
return nil, fmt.Errorf("HOOK_PATH was set but cannot be made absolute: %v", err)
}
if stat, err := os.Stat(path); err != nil || !stat.IsDir() {
return nil, fmt.Errorf("HOOK_PATH must be an existing directory if set: %v", err)
}
config.HookDirectory = path
}
allowAnonymousGet := os.Getenv("ALLOW_ANON_GIT_PULL") == "yes"
serverAuth := os.Getenv("REQUIRE_SERVER_AUTH")
gitAuth := os.Getenv("REQUIRE_GIT_AUTH")
if len(serverAuth) > 0 && len(gitAuth) > 0 {
return nil, fmt.Errorf("only one of REQUIRE_SERVER_AUTH or REQUIRE_GIT_AUTH may be specified")
}
if len(serverAuth) > 0 {
namespace := os.Getenv("AUTH_NAMESPACE")
if len(namespace) == 0 {
return nil, fmt.Errorf("when REQUIRE_SERVER_AUTH is set, AUTH_NAMESPACE must also be specified")
}
if serverAuth == "-" {
serverAuth = ""
}
rules := clientcmd.NewDefaultClientConfigLoadingRules()
rules.ExplicitPath = serverAuth
kubeconfig := clientcmd.NewNonInteractiveDeferredLoadingClientConfig(rules, &clientcmd.ConfigOverrides{})
cfg, err := kubeconfig.ClientConfig()
if err != nil {
return nil, fmt.Errorf("could not create a client for REQUIRE_SERVER_AUTH: %v", err)
}
osc, err := client.New(cfg)
if err != nil {
return nil, fmt.Errorf("could not create a client for REQUIRE_SERVER_AUTH: %v", err)
}
config.AuthMessage = fmt.Sprintf("Authenticating against %s allow-push=%t anon-pull=%t", cfg.Host, config.AllowPush, allowAnonymousGet)
config.AuthenticatorFn = auth.Authenticator(func(info auth.AuthInfo) (bool, error) {
if !info.Push && allowAnonymousGet {
return true, nil
}
req := &authapi.SubjectAccessReview{
Verb: "get",
Resource: "pods",
}
if info.Push {
if !config.AllowPush {
return false, nil
}
req.Verb = "create"
}
res, err := osc.ImpersonateSubjectAccessReviews(namespace, info.Password).Create(req)
if err != nil {
return false, err
}
//log.Printf("debug: server response allowed=%t message=%s", res.Allowed, res.Reason)
return res.Allowed, nil
})
}
if len(gitAuth) > 0 {
parts := strings.Split(gitAuth, ":")
if len(parts) != 2 {
return nil, fmt.Errorf("REQUIRE_GIT_AUTH must be a username and password separated by a ':'")
}
config.AuthMessage = fmt.Sprintf("Authenticating against username/password allow-push=%t", config.AllowPush)
username, password := parts[0], parts[1]
config.AuthenticatorFn = auth.Authenticator(func(info auth.AuthInfo) (bool, error) {
if info.Push {
if !config.AllowPush {
return false, nil
}
if allowAnonymousGet {
return true, nil
}
}
if info.Username != username || info.Password != password {
return false, nil
}
return true, nil
})
}
if value := os.Getenv("GIT_LISTEN"); len(value) > 0 {
config.Listen = value
}
config.CleanBeforeClone = os.Getenv("GIT_FORCE_CLEAN") == "yes"
clones := make(map[string]Clone)
for _, env := range os.Environ() {
if !strings.HasPrefix(env, initialClonePrefix) {
continue
}
parts := strings.SplitN(env, "=", 2)
if len(parts) != 2 {
continue
}
key, value := parts[0], parts[1]
part := key[len(initialClonePrefix):]
if len(part) == 0 {
continue
}
if len(value) == 0 {
return nil, fmt.Errorf("%s must not have an empty value", key)
}
defaultName := strings.Replace(strings.ToLower(part), "_", "-", -1)
values := strings.Split(value, ";")
var uri, name string
switch len(values) {
case 1:
uri, name = values[0], ""
case 2:
uri, name = values[0], values[1]
if len(name) == 0 {
return nil, fmt.Errorf("%s name may not be empty", key)
}
default:
return nil, fmt.Errorf("%s may only have two segments (<url> or <url>;<name>)", key)
}
url, err := git.ParseRepository(uri)
if err != nil {
return nil, fmt.Errorf("%s is not a valid repository URI: %v", key, err)
}
switch url.Scheme {
case "http", "https", "git", "ssh":
default:
return nil, fmt.Errorf("%s %q must be a http, https, git, or ssh URL", key, uri)
}
if len(name) == 0 {
if n, ok := git.NameFromRepositoryURL(url); ok {
name = n + ".git"
}
}
if len(name) == 0 {
name = defaultName + ".git"
}
if invalidCloneNameChars.MatchString(name) {
return nil, fmt.Errorf("%s name %q must be only letters, numbers, dashes, or underscores", key, name)
}
if _, ok := reservedNames[name]; ok {
return nil, fmt.Errorf("%s name %q is reserved (%v)", key, name, reservedNames)
}
clones[name] = Clone{
URL: *url,
}
}
config.InitialClones = clones
return config, nil
}