Exemplo n.º 1
0
// FillStyle demonstrates the difference between even odd and non zero winding rule.
func FillStyle(gc draw2d.GraphicContext, x, y, width, height float64) {
	sx, sy := width/232, height/220
	gc.SetLineWidth(width / 40)

	draw2dkit.Rectangle(gc, x+sx*0, y+sy*12, x+sx*232, y+sy*70)

	var wheel1, wheel2 draw2d.Path
	wheel1.ArcTo(x+sx*52, y+sy*70, sx*40, sy*40, 0, 2*math.Pi)
	wheel2.ArcTo(x+sx*180, y+sy*70, sx*40, sy*40, 0, -2*math.Pi)

	gc.SetFillRule(draw2d.FillRuleEvenOdd)
	gc.SetFillColor(color.NRGBA{0, 0xB2, 0, 0xFF})

	gc.SetStrokeColor(image.Black)
	gc.FillStroke(&wheel1, &wheel2)

	draw2dkit.Rectangle(gc, x, y+sy*140, x+sx*232, y+sy*198)
	wheel1.Clear()
	wheel1.ArcTo(x+sx*52, y+sy*198, sx*40, sy*40, 0, 2*math.Pi)
	wheel2.Clear()
	wheel2.ArcTo(x+sx*180, y+sy*198, sx*40, sy*40, 0, -2*math.Pi)

	gc.SetFillRule(draw2d.FillRuleWinding)
	gc.SetFillColor(color.NRGBA{0, 0, 0xE5, 0xFF})
	gc.FillStroke(&wheel1, &wheel2)
}
Exemplo n.º 2
0
// ArcNegative draws an arc with a negative angle (anti clockwise).
func ArcNegative(gc draw2d.GraphicContext, xc, yc, width, height float64) {
	xc += width / 2
	yc += height / 2
	radiusX, radiusY := width/2, height/2
	startAngle := 45.0 * (math.Pi / 180.0) /* angles are specified */
	angle := -225 * (math.Pi / 180.0)      /* clockwise in radians */
	gc.SetLineWidth(width / 10)
	gc.SetLineCap(draw2d.ButtCap)
	gc.SetStrokeColor(image.Black)

	gc.ArcTo(xc, yc, radiusX, radiusY, startAngle, angle)
	gc.Stroke()
	// fill a circle
	gc.SetStrokeColor(color.NRGBA{255, 0x33, 0x33, 0x80})
	gc.SetFillColor(color.NRGBA{255, 0x33, 0x33, 0x80})
	gc.SetLineWidth(width / 20)

	gc.MoveTo(xc+math.Cos(startAngle)*radiusX, yc+math.Sin(startAngle)*radiusY)
	gc.LineTo(xc, yc)
	gc.LineTo(xc-radiusX, yc)
	gc.Stroke()

	gc.ArcTo(xc, yc, width/10.0, height/10.0, 0, 2*math.Pi)
	gc.Fill()
}
Exemplo n.º 3
0
// Draw a left hand and ear of a gopher using a gc thanks to
// https://github.com/golang-samples/gopher-vector/
func Draw(gc draw2d.GraphicContext) {
	// Initialize Stroke Attribute
	gc.SetLineWidth(3)
	gc.SetLineCap(draw2d.RoundCap)
	gc.SetStrokeColor(color.Black)

	// Left hand
	// <path fill-rule="evenodd" clip-rule="evenodd" fill="#F6D2A2" stroke="#000000" stroke-width="3" stroke-linecap="round" d="
	// M10.634,300.493c0.764,15.751,16.499,8.463,23.626,3.539c6.765-4.675,8.743-0.789,9.337-10.015
	// c0.389-6.064,1.088-12.128,0.744-18.216c-10.23-0.927-21.357,1.509-29.744,7.602C10.277,286.542,2.177,296.561,10.634,300.493"/>
	gc.SetFillColor(color.RGBA{0xF6, 0xD2, 0xA2, 0xff})
	gc.MoveTo(10.634, 300.493)
	rCubicCurveTo(gc, 0.764, 15.751, 16.499, 8.463, 23.626, 3.539)
	rCubicCurveTo(gc, 6.765, -4.675, 8.743, -0.789, 9.337, -10.015)
	rCubicCurveTo(gc, 0.389, -6.064, 1.088, -12.128, 0.744, -18.216)
	rCubicCurveTo(gc, -10.23, -0.927, -21.357, 1.509, -29.744, 7.602)
	gc.CubicCurveTo(10.277, 286.542, 2.177, 296.561, 10.634, 300.493)
	gc.FillStroke()

	// <path fill-rule="evenodd" clip-rule="evenodd" fill="#C6B198" stroke="#000000" stroke-width="3" stroke-linecap="round" d="
	// M10.634,300.493c2.29-0.852,4.717-1.457,6.271-3.528"/>
	gc.MoveTo(10.634, 300.493)
	rCubicCurveTo(gc, 2.29, -0.852, 4.717, -1.457, 6.271, -3.528)
	gc.Stroke()

	// Left Ear
	// <path fill-rule="evenodd" clip-rule="evenodd" fill="#6AD7E5" stroke="#000000" stroke-width="3" stroke-linecap="round" d="
	// M46.997,112.853C-13.3,95.897,31.536,19.189,79.956,50.74L46.997,112.853z"/>
	gc.MoveTo(46.997, 112.853)
	gc.CubicCurveTo(-13.3, 95.897, 31.536, 19.189, 79.956, 50.74)
	gc.LineTo(46.997, 112.853)
	gc.Close()
	gc.Stroke()
}
Exemplo n.º 4
0
// Main draws a rotated face of the gopher. Afterwards it returns
// the filename. This should only be used during testing.
func Main(gc draw2d.GraphicContext, ext string) (string, error) {
	gc.SetStrokeColor(image.Black)
	gc.SetFillColor(image.White)
	gc.Save()
	// Draw a (partial) gopher
	gc.Translate(-60, 65)
	gc.Rotate(-30 * (math.Pi / 180.0))
	Draw(gc, 48, 48, 240, 72)
	gc.Restore()

	// Return the output filename
	return samples.Output("gopher2", ext), nil
}
Exemplo n.º 5
0
// Draw the droid on a certain position.
func Draw(gc draw2d.GraphicContext, x, y float64) {
	// set the fill and stroke color of the droid
	gc.SetFillColor(color.RGBA{0x44, 0xff, 0x44, 0xff})
	gc.SetStrokeColor(color.RGBA{0x44, 0x44, 0x44, 0xff})

	// set line properties
	gc.SetLineCap(draw2d.RoundCap)
	gc.SetLineWidth(5)

	// head
	gc.MoveTo(x+30, y+70)
	gc.ArcTo(x+80, y+70, 50, 50, 180*(math.Pi/180), 180*(math.Pi/180))
	gc.Close()
	gc.FillStroke()
	gc.MoveTo(x+60, y+25)
	gc.LineTo(x+50, y+10)
	gc.MoveTo(x+100, y+25)
	gc.LineTo(x+110, y+10)
	gc.Stroke()

	// left eye
	draw2dkit.Circle(gc, x+60, y+45, 5)
	gc.FillStroke()

	// right eye
	draw2dkit.Circle(gc, x+100, y+45, 5)
	gc.FillStroke()

	// body
	draw2dkit.RoundedRectangle(gc, x+30, y+75, x+30+100, y+75+90, 10, 10)
	gc.FillStroke()
	draw2dkit.Rectangle(gc, x+30, y+75, x+30+100, y+75+80)
	gc.FillStroke()

	// left arm
	draw2dkit.RoundedRectangle(gc, x+5, y+80, x+5+20, y+80+70, 10, 10)
	gc.FillStroke()

	// right arm
	draw2dkit.RoundedRectangle(gc, x+135, y+80, x+135+20, y+80+70, 10, 10)
	gc.FillStroke()

	// left leg
	draw2dkit.RoundedRectangle(gc, x+50, y+150, x+50+20, y+150+50, 10, 10)
	gc.FillStroke()

	// right leg
	draw2dkit.RoundedRectangle(gc, x+90, y+150, x+90+20, y+150+50, 10, 10)
	gc.FillStroke()
}
Exemplo n.º 6
0
// Dash draws a line with a dash pattern
func Dash(gc draw2d.GraphicContext, x, y, width, height float64) {
	sx, sy := width/162, height/205
	gc.SetStrokeColor(image.Black)
	gc.SetLineDash([]float64{height / 10, height / 50, height / 50, height / 50}, -50.0)
	gc.SetLineCap(draw2d.ButtCap)
	gc.SetLineJoin(draw2d.RoundJoin)
	gc.SetLineWidth(height / 50)

	gc.MoveTo(x+sx*60.0, y)
	gc.LineTo(x+sx*60.0, y)
	gc.LineTo(x+sx*162, y+sy*205)
	rLineTo(gc, sx*-102.4, 0)
	gc.CubicCurveTo(x+sx*-17, y+sy*205, x+sx*-17, y+sy*103, x+sx*60.0, y+sy*103.0)
	gc.Stroke()
	gc.SetLineDash(nil, 0.0)
}
Exemplo n.º 7
0
// CurveRectangle draws a rectangle with bezier curves (not rounded rectangle).
func CurveRectangle(gc draw2d.GraphicContext, x0, y0,
	rectWidth, rectHeight float64, stroke, fill color.Color) {
	radius := (rectWidth + rectHeight) / 4

	x1 := x0 + rectWidth
	y1 := y0 + rectHeight
	if rectWidth/2 < radius {
		if rectHeight/2 < radius {
			gc.MoveTo(x0, (y0+y1)/2)
			gc.CubicCurveTo(x0, y0, x0, y0, (x0+x1)/2, y0)
			gc.CubicCurveTo(x1, y0, x1, y0, x1, (y0+y1)/2)
			gc.CubicCurveTo(x1, y1, x1, y1, (x1+x0)/2, y1)
			gc.CubicCurveTo(x0, y1, x0, y1, x0, (y0+y1)/2)
		} else {
			gc.MoveTo(x0, y0+radius)
			gc.CubicCurveTo(x0, y0, x0, y0, (x0+x1)/2, y0)
			gc.CubicCurveTo(x1, y0, x1, y0, x1, y0+radius)
			gc.LineTo(x1, y1-radius)
			gc.CubicCurveTo(x1, y1, x1, y1, (x1+x0)/2, y1)
			gc.CubicCurveTo(x0, y1, x0, y1, x0, y1-radius)
		}
	} else {
		if rectHeight/2 < radius {
			gc.MoveTo(x0, (y0+y1)/2)
			gc.CubicCurveTo(x0, y0, x0, y0, x0+radius, y0)
			gc.LineTo(x1-radius, y0)
			gc.CubicCurveTo(x1, y0, x1, y0, x1, (y0+y1)/2)
			gc.CubicCurveTo(x1, y1, x1, y1, x1-radius, y1)
			gc.LineTo(x0+radius, y1)
			gc.CubicCurveTo(x0, y1, x0, y1, x0, (y0+y1)/2)
		} else {
			gc.MoveTo(x0, y0+radius)
			gc.CubicCurveTo(x0, y0, x0, y0, x0+radius, y0)
			gc.LineTo(x1-radius, y0)
			gc.CubicCurveTo(x1, y0, x1, y0, x1, y0+radius)
			gc.LineTo(x1, y1-radius)
			gc.CubicCurveTo(x1, y1, x1, y1, x1-radius, y1)
			gc.LineTo(x0+radius, y1)
			gc.CubicCurveTo(x0, y1, x0, y1, x0, y1-radius)
		}
	}
	gc.Close()
	gc.SetStrokeColor(stroke)
	gc.SetFillColor(fill)
	gc.SetLineWidth(10.0)
	gc.FillStroke()
}
Exemplo n.º 8
0
// FillStroke first fills and afterwards strokes a path.
func FillStroke(gc draw2d.GraphicContext, x, y, width, height float64) {
	sx, sy := width/210, height/215
	gc.MoveTo(x+sx*113.0, y)
	gc.LineTo(x+sx*215.0, y+sy*215)
	rLineTo(gc, sx*-100, 0)
	gc.CubicCurveTo(x+sx*35, y+sy*215, x+sx*35, y+sy*113, x+sx*113.0, y+sy*113)
	gc.Close()

	gc.MoveTo(x+sx*50.0, y)
	rLineTo(gc, sx*51.2, sy*51.2)
	rLineTo(gc, sx*-51.2, sy*51.2)
	rLineTo(gc, sx*-51.2, sy*-51.2)
	gc.Close()

	gc.SetLineWidth(width / 20.0)
	gc.SetFillColor(color.NRGBA{0, 0, 0xFF, 0xFF})
	gc.SetStrokeColor(image.Black)
	gc.FillStroke()
}
Exemplo n.º 9
0
// FillString draws a filled and stroked string.
func FillString(gc draw2d.GraphicContext, x, y, width, height float64) {
	sx, sy := width/100, height/100
	gc.Save()
	gc.SetStrokeColor(image.Black)
	gc.SetLineWidth(1)
	draw2dkit.RoundedRectangle(gc, x+sx*5, y+sy*5, x+sx*95, y+sy*95, sx*10, sy*10)
	gc.FillStroke()
	gc.SetFillColor(image.Black)
	gc.SetFontSize(height / 6)
	gc.Translate(x+sx*6, y+sy*52)
	gc.SetFontData(draw2d.FontData{
		Name:   "luxi",
		Family: draw2d.FontFamilyMono,
		Style:  draw2d.FontStyleBold | draw2d.FontStyleItalic})
	w := gc.FillString("Hug")
	gc.Translate(w+sx, 0)
	left, top, right, bottom := gc.GetStringBounds("cou")
	gc.SetStrokeColor(color.NRGBA{255, 0x33, 0x33, 0x80})
	draw2dkit.Rectangle(gc, left, top, right, bottom)
	gc.SetLineWidth(height / 50)
	gc.Stroke()
	gc.SetFillColor(color.NRGBA{0x33, 0x33, 0xff, 0xff})
	gc.SetStrokeColor(color.NRGBA{0x33, 0x33, 0xff, 0xff})
	gc.SetLineWidth(height / 100)
	gc.StrokeString("Hug")
	gc.Restore()
}
Exemplo n.º 10
0
// CubicCurve draws a cubic curve with its control points.
func CubicCurve(gc draw2d.GraphicContext, x, y, width, height float64) {
	sx, sy := width/162, height/205
	x0, y0 := x, y+sy*100.0
	x1, y1 := x+sx*75, y+sy*205
	x2, y2 := x+sx*125, y
	x3, y3 := x+sx*205, y+sy*100

	gc.SetStrokeColor(image.Black)
	gc.SetFillColor(color.NRGBA{0xAA, 0xAA, 0xAA, 0xFF})
	gc.SetLineWidth(width / 10)
	gc.MoveTo(x0, y0)
	gc.CubicCurveTo(x1, y1, x2, y2, x3, y3)
	gc.Stroke()

	gc.SetStrokeColor(color.NRGBA{0xFF, 0x33, 0x33, 0x88})

	gc.SetLineWidth(width / 20)
	// draw segment of curve
	gc.MoveTo(x0, y0)
	gc.LineTo(x1, y1)
	gc.LineTo(x2, y2)
	gc.LineTo(x3, y3)
	gc.Stroke()
}