Exemplo n.º 1
0
Arquivo: diag.go Projeto: rht/ipget
func (d *Diagnostics) HandleMessage(ctx context.Context, s inet.Stream) error {

	cr := ctxio.NewReader(ctx, s)
	cw := ctxio.NewWriter(ctx, s)
	r := ggio.NewDelimitedReader(cr, inet.MessageSizeMax) // maxsize
	w := ggio.NewDelimitedWriter(cw)

	// deserialize msg
	pmes := new(pb.Message)
	if err := r.ReadMsg(pmes); err != nil {
		log.Debugf("Failed to decode protobuf message: %v", err)
		return nil
	}

	// Print out diagnostic
	log.Infof("[peer: %s] Got message from [%s]\n",
		d.self.Pretty(), s.Conn().RemotePeer())

	// Make sure we havent already handled this request to prevent loops
	if err := d.startDiag(pmes.GetDiagID()); err != nil {
		return nil
	}

	resp := newMessage(pmes.GetDiagID())
	resp.Data = d.getDiagInfo().Marshal()
	if err := w.WriteMsg(resp); err != nil {
		log.Debugf("Failed to write protobuf message over stream: %s", err)
		return err
	}

	timeout := pmes.GetTimeoutDuration()
	if timeout < HopTimeoutDecrement {
		return fmt.Errorf("timeout too short: %s", timeout)
	}
	ctx, cancel := context.WithTimeout(ctx, timeout)
	defer cancel()
	pmes.SetTimeoutDuration(timeout - HopTimeoutDecrement)

	dpeers, err := d.getDiagnosticFromPeers(ctx, d.getPeers(), pmes)
	if err != nil {
		log.Debugf("diagnostic from peers err: %s", err)
		return err
	}
	for b := range dpeers {
		resp := newMessage(pmes.GetDiagID())
		resp.Data = b.Marshal()
		if err := w.WriteMsg(resp); err != nil {
			log.Debugf("Failed to write protobuf message over stream: %s", err)
			return err
		}
	}

	return nil
}
Exemplo n.º 2
0
Arquivo: id.go Projeto: rht/ipget
func (ids *IDService) ResponseHandler(s inet.Stream) {
	defer s.Close()
	c := s.Conn()

	r := ggio.NewDelimitedReader(s, 2048)
	mes := pb.Identify{}
	if err := r.ReadMsg(&mes); err != nil {
		return
	}
	ids.consumeMessage(&mes, c)

	log.Debugf("%s received message from %s %s", ID,
		c.RemotePeer(), c.RemoteMultiaddr())
}
Exemplo n.º 3
0
Arquivo: mux.go Projeto: rht/ipget
// HandleSync reads the next name off the Stream, and calls a handler function
// This is done synchronously. The handler function will return before
// HandleSync returns.
func (m *Mux) HandleSync(s inet.Stream) {
	ctx := context.Background()

	name, handler, err := m.ReadHeader(s)
	if err != nil {
		err = fmt.Errorf("protocol mux error: %s", err)
		log.Event(ctx, "muxError", lgbl.Error(err))
		s.Close()
		return
	}

	log.Debugf("muxer handle protocol %s: %s", s.Conn().RemotePeer(), name)
	handler(s)
}
Exemplo n.º 4
0
// newStreamHandler is the remote-opened stream handler for inet.Network
// TODO: this feels a bit wonky
func (h *BasicHost) newStreamHandler(s inet.Stream) {
	protoID, handle, err := h.Mux().ReadHeader(s)
	if err != nil {
		if err == io.EOF {
			log.Debugf("protocol EOF: %s", s.Conn().RemotePeer())
		} else {
			log.Warning("protocol mux failed: %s", err)
		}
		return
	}

	logStream := mstream.WrapStream(s, protoID, h.bwc)

	go handle(logStream)
}
Exemplo n.º 5
0
Arquivo: dht_net.go Projeto: rht/ipget
func (dht *IpfsDHT) handleNewMessage(s inet.Stream) {
	defer s.Close()

	ctx := dht.Context()
	cr := ctxio.NewReader(ctx, s) // ok to use. we defer close stream in this func
	cw := ctxio.NewWriter(ctx, s) // ok to use. we defer close stream in this func
	r := ggio.NewDelimitedReader(cr, inet.MessageSizeMax)
	w := ggio.NewDelimitedWriter(cw)
	mPeer := s.Conn().RemotePeer()

	// receive msg
	pmes := new(pb.Message)
	if err := r.ReadMsg(pmes); err != nil {
		log.Debugf("Error unmarshaling data: %s", err)
		return
	}

	// update the peer (on valid msgs only)
	dht.updateFromMessage(ctx, mPeer, pmes)

	// get handler for this msg type.
	handler := dht.handlerForMsgType(pmes.GetType())
	if handler == nil {
		log.Debug("got back nil handler from handlerForMsgType")
		return
	}

	// dispatch handler.
	rpmes, err := handler(ctx, mPeer, pmes)
	if err != nil {
		log.Debugf("handle message error: %s", err)
		return
	}

	// if nil response, return it before serializing
	if rpmes == nil {
		log.Debug("Got back nil response from request.")
		return
	}

	// send out response msg
	if err := w.WriteMsg(rpmes); err != nil {
		log.Debugf("send response error: %s", err)
		return
	}

	return
}
Exemplo n.º 6
0
Arquivo: ping.go Projeto: rht/ipget
func (p *PingService) PingHandler(s inet.Stream) {
	buf := make([]byte, PingSize)

	for {
		_, err := io.ReadFull(s, buf)
		if err != nil {
			log.Debug(err)
			return
		}

		_, err = s.Write(buf)
		if err != nil {
			log.Debug(err)
			return
		}
	}
}
Exemplo n.º 7
0
Arquivo: ping.go Projeto: rht/ipget
func ping(s inet.Stream) (time.Duration, error) {
	buf := make([]byte, PingSize)
	u.NewTimeSeededRand().Read(buf)

	before := time.Now()
	_, err := s.Write(buf)
	if err != nil {
		return 0, err
	}

	rbuf := make([]byte, PingSize)
	_, err = io.ReadFull(s, rbuf)
	if err != nil {
		return 0, err
	}

	if !bytes.Equal(buf, rbuf) {
		return 0, errors.New("ping packet was incorrect!")
	}

	return time.Now().Sub(before), nil
}
Exemplo n.º 8
0
Arquivo: relay.go Projeto: rht/ipget
// handleStream is our own handler, which returns an error for simplicity.
func (rs *RelayService) handleStream(s inet.Stream) error {
	defer s.Close()

	// read the header (src and dst peer.IDs)
	src, dst, err := ReadHeader(s)
	if err != nil {
		return fmt.Errorf("stream with bad header: %s", err)
	}

	local := rs.host.ID()

	switch {
	case src == local:
		return fmt.Errorf("relaying from self")
	case dst == local: // it's for us! yaaay.
		log.Debugf("%s consuming stream from %s", local, src)
		return rs.consumeStream(s)
	default: // src and dst are not local. relay it.
		log.Debugf("%s relaying stream %s <--> %s", local, src, dst)
		return rs.pipeStream(src, dst, s)
	}
}
Exemplo n.º 9
0
// handleNewStream receives a new stream from the network.
func (bsnet *impl) handleNewStream(s inet.Stream) {
	defer s.Close()

	if bsnet.receiver == nil {
		return
	}

	received, err := bsmsg.FromNet(s)
	if err != nil {
		go bsnet.receiver.ReceiveError(err)
		log.Debugf("bitswap net handleNewStream from %s error: %s", s.Conn().RemotePeer(), err)
		return
	}

	p := s.Conn().RemotePeer()
	ctx := context.Background()
	log.Debugf("bitswap net handleNewStream from %s", s.Conn().RemotePeer())
	bsnet.receiver.ReceiveMessage(ctx, p, received)
}
Exemplo n.º 10
0
Arquivo: id.go Projeto: rht/ipget
func (ids *IDService) RequestHandler(s inet.Stream) {
	defer s.Close()
	c := s.Conn()

	bwc := ids.Host.GetBandwidthReporter()
	s = mstream.WrapStream(s, ID, bwc)

	w := ggio.NewDelimitedWriter(s)
	mes := pb.Identify{}
	ids.populateMessage(&mes, s.Conn())
	w.WriteMsg(&mes)

	log.Debugf("%s sent message to %s %s", ID,
		c.RemotePeer(), c.RemoteMultiaddr())
}
Exemplo n.º 11
0
Arquivo: diag.go Projeto: rht/ipget
func (d *Diagnostics) handleNewStream(s inet.Stream) {
	d.HandleMessage(context.Background(), s)
	s.Close()
}
Exemplo n.º 12
0
func (p *standard) HandleStream(s inet.Stream) {
	// TODO(brian): Should clients be able to satisfy requests?
	log.Error("supernode client received (dropped) a routing message from", s.Conn().RemotePeer())
	s.Close()
}