func initMidi() {
s, err := portmidi.NewInputStream(portmidi.DeviceId(*midiDevice), 1024)
if err != nil {
log.Println(err)
return
}
go midiLoop(s)
}
func (w *watcher) Run() (err error) {
midiIn, err := portmidi.NewInputStream(w.midiport, 1024)
if err != nil {
return
}
events := midiIn.Listen()
for e := range events {
w.HandleEvent(&e)
}
return nil
}
// Open opens a connection Launchpad and initializes an input and output
// stream to the currently connected device. If there are no
// devices are connected, it returns an error.
func Open() (*Launchpad, error) {
input, output, err := discover()
if err != nil {
return nil, err
}
var inStream, outStream *portmidi.Stream
if inStream, err = portmidi.NewInputStream(input, 1024); err != nil {
return nil, err
}
if outStream, err = portmidi.NewOutputStream(output, 1024, 0); err != nil {
return nil, err
}
return &Launchpad{inputStream: inStream, outputStream: outStream}, nil
}
func ExampleStream_ReadSysExBytes() {
in, err := portmidi.NewInputStream(portmidi.DefaultInputDeviceID(), 1024)
if err != nil {
log.Fatal(err)
}
msg, err := in.Read(1024)
if err != nil {
log.Fatal(err)
}
for i, b := range msg {
fmt.Printf("SysEx message byte %d = %02x\n", i, b)
}
}
func initMidi() {
device := portmidi.DeviceId(*midiDevice)
if device == -1 {
device = portmidi.GetDefaultInputDeviceId()
}
s, err := portmidi.NewInputStream(device, 1024)
if err != nil {
log.Println(err)
return
}
if s == nil {
log.Println("could not initialize MIDI input device")
return
}
go midiLoop(s)
}
func ExampleStream_Poll() {
in, err := portmidi.NewInputStream(portmidi.DefaultInputDeviceID(), 1024)
if err != nil {
log.Fatal(err)
}
result, err := in.Poll()
if err != nil {
log.Fatal(err)
}
if result {
fmt.Println("New messages in the queue!")
} else {
fmt.Println("No new messages in the queue :(")
}
}
func midiOpen(argv []*ell.Object) (*ell.Object, error) {
// defaultInput := "USB Oxygen 8 v2"
// defaultOutput := "IAC Driver Bus 1"
latency := int64(10)
if !midiOpened {
err := portmidi.Initialize()
if err != nil {
return nil, err
}
midiOpened = true
midiInDevice = ell.StringValue(argv[0])
midiOutDevice = ell.StringValue(argv[1])
midiBufsize = ell.Int64Value(argv[2])
outdev, outname := findMidiOutputDevice(midiOutDevice)
out, err := portmidi.NewOutputStream(outdev, midiBufsize, latency)
if err != nil {
return nil, err
}
midiOut = out
midiOutDevice = outname
if midiInDevice != "" {
indev := findMidiInputDevice(midiInDevice)
if indev >= 0 {
in, err := portmidi.NewInputStream(indev, midiBufsize)
if err != nil {
return nil, err
}
midiIn = in
}
}
midiBaseTime = ell.Now()
}
result := ell.MakeStruct(4)
if midiInDevice != "" {
ell.Put(result, inputKey, ell.String(midiInDevice))
}
if midiOutDevice != "" {
ell.Put(result, outputKey, ell.String(midiOutDevice))
}
ell.Put(result, bufsizeKey, ell.Number(float64(midiBufsize)))
return result, nil
}
func main() {
var synthID int32
const synthName = "sineTone"
// Set up SuperCollider client.
client, err := sc.NewClient("udp", "127.0.0.1:57121", "127.0.0.1:57120", 5*time.Second)
if err != nil {
log.Fatal(err)
}
_, err = client.AddDefaultGroup()
if err != nil {
log.Fatal(err)
}
err = client.DumpOSC(int32(1))
if err != nil {
log.Fatal(err)
}
def := sc.NewSynthdef(synthName, func(p sc.Params) sc.Ugen {
freq := p.Add("freq", 440)
gain := p.Add("gain", 0.5)
bus := sc.C(0)
env := sc.EnvGen{
Env: sc.EnvPerc{},
Done: sc.FreeEnclosing,
LevelScale: gain,
}.Rate(sc.KR)
sig := sc.SinOsc{Freq: freq}.Rate(sc.AR).Mul(env)
return sc.Out{bus, sig}.Rate(sc.AR)
})
err = client.SendDef(def)
if err != nil {
log.Fatal(err)
}
// initialize midi
portmidi.Initialize()
// this code can be uncommented to discover the
// device ID's portmidi comes up with
// deviceCount := portmidi.CountDevices()
// enc := json.NewEncoder(os.Stdout)
// for i := 0; i < deviceCount; i++ {
// info := portmidi.GetDeviceInfo(portmidi.DeviceId(i))
// log.Printf("device %d - ", i)
// err = enc.Encode(info)
// if err != nil {
// log.Fatal(err)
// }
// }
// setup midi input stream and listen for midi events
in, err := portmidi.NewInputStream(3, 1024)
if err != nil {
log.Fatal(err)
}
ch := in.Listen()
for event := range ch {
if event.Status == 144 {
// MIDI note
log.Printf("Note %-3d Velocity %-3d\n", event.Data1, event.Data2)
if event.Data2 > 0 {
// Note On
synthID = client.NextSynthID()
ctls := map[string]float32{
"freq": sc.Midicps(float32(event.Data1)),
"gain": float32(event.Data2 / 127.0),
}
_, err = client.Synth(synthName, synthID, sc.AddToTail, sc.DefaultGroupID, ctls)
}
}
}
portmidi.Terminate()
}
// Start begins the Sound by opening two goroutines - one to take a set of active notes and convert
// it into sampled sine waves at the right frequencies, and the second to to listen to the midi input
// stream of events and convert that into the live set of active notes.
func (s *MidiInput) Start() {
fmt.Println("Starting the MIDI sound's channel...")
s.samples = make(chan float64)
s.running = true
// Goroutine to convert the s.notes set to samples.
go func(midi *MidiInput) {
fmt.Printf(" MIDI generation begun!\n")
atNano := float64(time.Now().UnixNano())
ticker := time.NewTicker(tickerDuration)
defer ticker.Stop()
for now := range ticker.C {
if !midi.running {
break
}
nowNano := float64(now.UnixNano())
for ; atNano < nowNano && midi.running; atNano += nsPerCycle {
if s.notes.IsEmpty() {
if midi.running {
midi.samples <- 0.0
}
} else {
cycleAtMult := atNano * nsToSeconds
value := 0.0
for _, note := range s.notes.List() {
// TODO(padster): Remove the * -> int64 -> int cast
cps := midiToHz(int(note.(int64)))
offset := math.Remainder(cps*cycleAtMult, 1.0) * math.Pi * 2.0
value += math.Sin(offset)
}
if midi.running {
midi.samples <- value / float64(s.notes.Size())
}
}
}
}
close(s.samples)
}(s)
// Goroutine for reading from the input:
go func() {
fmt.Println(" Opening MIDI stream..")
in, err := pm.NewInputStream(s.deviceId, 10)
if err != nil {
fmt.Printf("Error in reading midi device %d: Ensure portmidi is Initialized, and device is available.\n", s.deviceId)
panic(err)
}
fmt.Println("Listening to stream")
for event := range in.Listen() {
// TODO - figure out what event.Data2 is (volumne?) and use it...
fmt.Printf("Got: %v\n", event)
if event.Status == noteStart {
s.notes.Add(int64(event.Data1))
} else if event.Status == noteEnd {
s.notes.Remove(int64(event.Data1))
} else if event.Status == pitchBend {
s.Stop()
}
if !s.running {
break
}
}
}()
// TODO(padster): Move goroutines into struct methods?
}