Exemplo n.º 1
0
// mine generates a testnet struct literal with nodes at
// various distances to the given target.
func (n *preminedTestnet) mine(target NodeID) {
	n.target = target
	n.targetSha = crypto.Sha3Hash(n.target[:])
	found := 0
	for found < bucketSize*10 {
		k := newkey()
		id := PubkeyID(&k.PublicKey)
		sha := crypto.Sha3Hash(id[:])
		ld := logdist(n.targetSha, sha)
		if len(n.dists[ld]) < bucketSize {
			n.dists[ld] = append(n.dists[ld], id)
			fmt.Println("found ID with ld", ld)
			found++
		}
	}
	fmt.Println("&preminedTestnet{")
	fmt.Printf("	target: %#v,\n", n.target)
	fmt.Printf("	targetSha: %#v,\n", n.targetSha)
	fmt.Printf("	dists: [%d][]NodeID{\n", len(n.dists))
	for ld, ns := range n.dists {
		if len(ns) == 0 {
			continue
		}
		fmt.Printf("		%d: []NodeID{\n", ld)
		for _, n := range ns {
			fmt.Printf("			MustHexID(\"%x\"),\n", n[:])
		}
		fmt.Println("		},")
	}
	fmt.Println("	},")
	fmt.Println("}")
}
Exemplo n.º 2
0
func (req *findnode) handle(t *udp, from *net.UDPAddr, fromID NodeID, mac []byte) error {
	if expired(req.Expiration) {
		return errExpired
	}
	if t.db.node(fromID) == nil {
		// No bond exists, we don't process the packet. This prevents
		// an attack vector where the discovery protocol could be used
		// to amplify traffic in a DDOS attack. A malicious actor
		// would send a findnode request with the IP address and UDP
		// port of the target as the source address. The recipient of
		// the findnode packet would then send a neighbors packet
		// (which is a much bigger packet than findnode) to the victim.
		return errUnknownNode
	}
	target := crypto.Sha3Hash(req.Target[:])
	t.mutex.Lock()
	closest := t.closest(target, bucketSize).entries
	t.mutex.Unlock()

	p := neighbors{Expiration: uint64(time.Now().Add(expiration).Unix())}
	// Send neighbors in chunks with at most maxNeighbors per packet
	// to stay below the 1280 byte limit.
	for i, n := range closest {
		p.Nodes = append(p.Nodes, nodeToRPC(n))
		if len(p.Nodes) == maxNeighbors || i == len(closest)-1 {
			t.send(from, neighborsPacket, p)
			p.Nodes = p.Nodes[:0]
		}
	}
	return nil
}
Exemplo n.º 3
0
// Hash returns the SHA3 hash of the envelope, calculating it if not yet done.
func (self *Envelope) Hash() common.Hash {
	if (self.hash == common.Hash{}) {
		enc, _ := rlp.EncodeToBytes(self)
		self.hash = crypto.Sha3Hash(enc)
	}
	return self.hash
}
Exemplo n.º 4
0
func TestGetAuthContent(t *testing.T) {
	dir, err := ioutil.TempDir("", "docserver-test")
	if err != nil {
		t.Fatal("cannot create temporary directory:", err)
	}
	defer os.RemoveAll(dir)
	ds := New(dir)

	text := "test"
	hash := crypto.Sha3Hash([]byte(text))
	if err := ioutil.WriteFile(path.Join(dir, "test.content"), []byte(text), os.ModePerm); err != nil {
		t.Fatal("could not write test file", err)
	}
	content, err := ds.GetAuthContent("file:///test.content", hash)
	if err != nil {
		t.Errorf("no error expected, got %v", err)
	}
	if string(content) != text {
		t.Errorf("incorrect content. expected %v, got %v", text, string(content))
	}

	hash = common.Hash{}
	content, err = ds.GetAuthContent("file:///test.content", hash)
	expected := "content hash mismatch 0000000000000000000000000000000000000000000000000000000000000000 != 9c22ff5f21f0b81b113e63f7db6da94fedef11b2119b4088b89664fb9a3cb658 (exp)"
	if err == nil {
		t.Errorf("expected error, got nothing")
	} else {
		if err.Error() != expected {
			t.Errorf("expected error '%s' got '%v'", expected, err)
		}
	}

}
Exemplo n.º 5
0
// NewProgram returns a new JIT program
func NewProgram(code []byte) *Program {
	program := &Program{
		Id:           crypto.Sha3Hash(code),
		mapping:      make(map[uint64]int),
		destinations: make(map[uint64]struct{}),
		code:         code,
	}

	programs.Add(program.Id, program)
	return program
}
Exemplo n.º 6
0
// Bootstrap sets the bootstrap nodes. These nodes are used to connect
// to the network if the table is empty. Bootstrap will also attempt to
// fill the table by performing random lookup operations on the
// network.
func (tab *Table) Bootstrap(nodes []*Node) {
	tab.mutex.Lock()
	// TODO: maybe filter nodes with bad fields (nil, etc.) to avoid strange crashes
	tab.nursery = make([]*Node, 0, len(nodes))
	for _, n := range nodes {
		cpy := *n
		cpy.sha = crypto.Sha3Hash(n.ID[:])
		tab.nursery = append(tab.nursery, &cpy)
	}
	tab.mutex.Unlock()
	tab.refresh()
}
Exemplo n.º 7
0
func newNode(id NodeID, ip net.IP, udpPort, tcpPort uint16) *Node {
	if ipv4 := ip.To4(); ipv4 != nil {
		ip = ipv4
	}
	return &Node{
		IP:  ip,
		UDP: udpPort,
		TCP: tcpPort,
		ID:  id,
		sha: crypto.Sha3Hash(id[:]),
	}
}
Exemplo n.º 8
0
// node retrieves a node with a given id from the database.
func (db *nodeDB) node(id NodeID) *Node {
	blob, err := db.lvl.Get(makeKey(id, nodeDBDiscoverRoot), nil)
	if err != nil {
		glog.V(logger.Detail).Infof("failed to retrieve node %v: %v", id, err)
		return nil
	}
	node := new(Node)
	if err := rlp.DecodeBytes(blob, node); err != nil {
		glog.V(logger.Warn).Infof("failed to decode node RLP: %v", err)
		return nil
	}
	node.sha = crypto.Sha3Hash(node.ID[:])
	return node
}
Exemplo n.º 9
0
// DecodeRLP decodes an Envelope from an RLP data stream.
func (self *Envelope) DecodeRLP(s *rlp.Stream) error {
	raw, err := s.Raw()
	if err != nil {
		return err
	}
	// The decoding of Envelope uses the struct fields but also needs
	// to compute the hash of the whole RLP-encoded envelope. This
	// type has the same structure as Envelope but is not an
	// rlp.Decoder so we can reuse the Envelope struct definition.
	type rlpenv Envelope
	if err := rlp.DecodeBytes(raw, (*rlpenv)(self)); err != nil {
		return err
	}
	self.hash = crypto.Sha3Hash(raw)
	return nil
}
Exemplo n.º 10
0
func (self *DocServer) GetAuthContent(uri string, hash common.Hash) (content []byte, err error) {
	// retrieve content
	content, err = self.Get(uri, "")
	if err != nil {
		return
	}

	// check hash to authenticate content
	chash := crypto.Sha3Hash(content)
	if chash != hash {
		content = nil
		err = fmt.Errorf("content hash mismatch %x != %x (exp)", hash[:], chash[:])
	}

	return

}
Exemplo n.º 11
0
func TestUDP_findnode(t *testing.T) {
	test := newUDPTest(t)
	defer test.table.Close()

	// put a few nodes into the table. their exact
	// distribution shouldn't matter much, altough we need to
	// take care not to overflow any bucket.
	targetHash := crypto.Sha3Hash(testTarget[:])
	nodes := &nodesByDistance{target: targetHash}
	for i := 0; i < bucketSize; i++ {
		nodes.push(nodeAtDistance(test.table.self.sha, i+2), bucketSize)
	}
	test.table.stuff(nodes.entries)

	// ensure there's a bond with the test node,
	// findnode won't be accepted otherwise.
	test.table.db.updateNode(newNode(
		PubkeyID(&test.remotekey.PublicKey),
		test.remoteaddr.IP,
		uint16(test.remoteaddr.Port),
		99,
	))
	// check that closest neighbors are returned.
	test.packetIn(nil, findnodePacket, &findnode{Target: testTarget, Expiration: futureExp})
	expected := test.table.closest(targetHash, bucketSize)

	waitNeighbors := func(want []*Node) {
		test.waitPacketOut(func(p *neighbors) {
			if len(p.Nodes) != len(want) {
				t.Errorf("wrong number of results: got %d, want %d", len(p.Nodes), bucketSize)
			}
			for i := range p.Nodes {
				if p.Nodes[i].ID != want[i].ID {
					t.Errorf("result mismatch at %d:\n  got:  %v\n  want: %v", i, p.Nodes[i], expected.entries[i])
				}
			}
		})
	}
	waitNeighbors(expected.entries[:maxNeighbors])
	waitNeighbors(expected.entries[maxNeighbors:])
}
Exemplo n.º 12
0
// Lookup performs a network search for nodes close
// to the given target. It approaches the target by querying
// nodes that are closer to it on each iteration.
// The given target does not need to be an actual node
// identifier.
func (tab *Table) Lookup(targetID NodeID) []*Node {
	var (
		target         = crypto.Sha3Hash(targetID[:])
		asked          = make(map[NodeID]bool)
		seen           = make(map[NodeID]bool)
		reply          = make(chan []*Node, alpha)
		pendingQueries = 0
	)
	// don't query further if we hit ourself.
	// unlikely to happen often in practice.
	asked[tab.self.ID] = true

	tab.mutex.Lock()
	// update last lookup stamp (for refresh logic)
	tab.buckets[logdist(tab.self.sha, target)].lastLookup = time.Now()
	// generate initial result set
	result := tab.closest(target, bucketSize)
	tab.mutex.Unlock()

	// If the result set is empty, all nodes were dropped, refresh
	if len(result.entries) == 0 {
		tab.refresh()
		return nil
	}

	for {
		// ask the alpha closest nodes that we haven't asked yet
		for i := 0; i < len(result.entries) && pendingQueries < alpha; i++ {
			n := result.entries[i]
			if !asked[n.ID] {
				asked[n.ID] = true
				pendingQueries++
				go func() {
					// Find potential neighbors to bond with
					r, err := tab.net.findnode(n.ID, n.addr(), targetID)
					if err != nil {
						// Bump the failure counter to detect and evacuate non-bonded entries
						fails := tab.db.findFails(n.ID) + 1
						tab.db.updateFindFails(n.ID, fails)
						glog.V(logger.Detail).Infof("Bumping failures for %x: %d", n.ID[:8], fails)

						if fails >= maxFindnodeFailures {
							glog.V(logger.Detail).Infof("Evacuating node %x: %d findnode failures", n.ID[:8], fails)
							tab.delete(n)
						}
					}
					reply <- tab.bondall(r)
				}()
			}
		}
		if pendingQueries == 0 {
			// we have asked all closest nodes, stop the search
			break
		}
		// wait for the next reply
		for _, n := range <-reply {
			if n != nil && !seen[n.ID] {
				seen[n.ID] = true
				result.push(n, bucketSize)
			}
		}
		pendingQueries--
	}
	return result.entries
}
Exemplo n.º 13
0
// end to end test
func TestNatspecE2E(t *testing.T) {
	t.Skip()

	tf := testInit(t)
	defer tf.ethereum.Stop()
	addr, _ := tf.ethereum.Etherbase()

	// create a contractInfo file (mock cloud-deployed contract metadocs)
	// incidentally this is the info for the registry contract itself
	ioutil.WriteFile("/tmp/"+testFileName, []byte(testContractInfo), os.ModePerm)
	dochash := crypto.Sha3Hash([]byte(testContractInfo))

	// take the codehash for the contract we wanna test
	codeb := tf.xeth.CodeAtBytes(registrar.HashRegAddr)
	codehash := crypto.Sha3Hash(codeb)

	// use resolver to register codehash->dochash->url
	// test if globalregistry works
	// registrar.HashRefAddr = "0x0"
	// registrar.UrlHintAddr = "0x0"
	reg := registrar.New(tf.xeth)
	_, err := reg.SetHashToHash(addr, codehash, dochash)
	if err != nil {
		t.Errorf("error registering: %v", err)
	}
	_, err = reg.SetUrlToHash(addr, dochash, "file:///"+testFileName)
	if err != nil {
		t.Errorf("error registering: %v", err)
	}
	if !processTxs(tf, t, 5) {
		return
	}

	// NatSpec info for register method of HashReg contract installed
	// now using the same transactions to check confirm messages

	tf.wantNatSpec = true // this is set so now the backend uses natspec confirmation
	_, err = reg.SetHashToHash(addr, codehash, dochash)
	if err != nil {
		t.Errorf("error calling contract registry: %v", err)
	}

	fmt.Printf("GlobalRegistrar: %v, HashReg: %v, UrlHint: %v\n", registrar.GlobalRegistrarAddr, registrar.HashRegAddr, registrar.UrlHintAddr)
	if tf.lastConfirm != testExpNotice {
		t.Errorf("Wrong confirm message. expected\n'%v', got\n'%v'", testExpNotice, tf.lastConfirm)
	}

	// test unknown method
	exp := fmt.Sprintf(testExpNotice2, registrar.HashRegAddr)
	_, err = reg.SetOwner(addr)
	if err != nil {
		t.Errorf("error setting owner: %v", err)
	}

	if tf.lastConfirm != exp {
		t.Errorf("Wrong confirm message, expected\n'%v', got\n'%v'", exp, tf.lastConfirm)
	}

	// test unknown contract
	exp = fmt.Sprintf(testExpNotice3, registrar.UrlHintAddr)

	_, err = reg.SetUrlToHash(addr, dochash, "file:///test.content")
	if err != nil {
		t.Errorf("error registering: %v", err)
	}

	if tf.lastConfirm != exp {
		t.Errorf("Wrong confirm message, expected '%v', got '%v'", exp, tf.lastConfirm)
	}

}
Exemplo n.º 14
0
		nonce:       0x318df1c8adef7e5e,
		mixDigest:   common.HexToHash("144b180aad09ae3c81fb07be92c8e6351b5646dda80e6844ae1b697e55ddde84"),
	},
	// from proof of concept nine testnet, epoch 2
	{
		number:      60000,
		hashNoNonce: common.HexToHash("5fc898f16035bf5ac9c6d9077ae1e3d5fc1ecc3c9fd5bee8bb00e810fdacbaa0"),
		difficulty:  big.NewInt(2467358),
		nonce:       0x50377003e5d830ca,
		mixDigest:   common.HexToHash("ab546a5b73c452ae86dadd36f0ed83a6745226717d3798832d1b20b489e82063"),
	},
}

var invalidZeroDiffBlock = testBlock{
	number:      61440000,
	hashNoNonce: crypto.Sha3Hash([]byte("foo")),
	difficulty:  big.NewInt(0),
	nonce:       0xcafebabec00000fe,
	mixDigest:   crypto.Sha3Hash([]byte("bar")),
}

func TestEthashVerifyValid(t *testing.T) {
	eth := New()
	for i, block := range validBlocks {
		if !eth.Verify(block) {
			t.Errorf("block %d (%x) did not validate.", i, block.hashNoNonce[:6])
		}
	}
}

func TestEthashVerifyInvalid(t *testing.T) {
Exemplo n.º 15
0
// Run loops and evaluates the contract's code with the given input data
func (self *Vm) Run(context *Context, input []byte) (ret []byte, err error) {
	self.env.SetDepth(self.env.Depth() + 1)
	defer self.env.SetDepth(self.env.Depth() - 1)

	// User defer pattern to check for an error and, based on the error being nil or not, use all gas and return.
	defer func() {
		if err != nil {
			// In case of a VM exception (known exceptions) all gas consumed (panics NOT included).
			context.UseGas(context.Gas)

			ret = context.Return(nil)
		}
	}()

	if context.CodeAddr != nil {
		if p := Precompiled[context.CodeAddr.Str()]; p != nil {
			return self.RunPrecompiled(p, input, context)
		}
	}

	var (
		codehash = crypto.Sha3Hash(context.Code) // codehash is used when doing jump dest caching
		program  *Program
	)
	if EnableJit {
		// Fetch program status.
		// * If ready run using JIT
		// * If unknown, compile in a seperate goroutine
		// * If forced wait for compilation and run once done
		if status := GetProgramStatus(codehash); status == progReady {
			return RunProgram(GetProgram(codehash), self.env, context, input)
		} else if status == progUnknown {
			if ForceJit {
				// Create and compile program
				program = NewProgram(context.Code)
				perr := CompileProgram(program)
				if perr == nil {
					return RunProgram(program, self.env, context, input)
				}
				glog.V(logger.Info).Infoln("error compiling program", err)
			} else {
				// create and compile the program. Compilation
				// is done in a seperate goroutine
				program = NewProgram(context.Code)
				go func() {
					err := CompileProgram(program)
					if err != nil {
						glog.V(logger.Info).Infoln("error compiling program", err)
						return
					}
				}()
			}
		}
	}

	var (
		caller = context.caller
		code   = context.Code
		value  = context.value
		price  = context.Price

		op      OpCode             // current opcode
		mem     = NewMemory()      // bound memory
		stack   = newstack()       // local stack
		statedb = self.env.State() // current state
		// For optimisation reason we're using uint64 as the program counter.
		// It's theoretically possible to go above 2^64. The YP defines the PC to be uint256. Pratically much less so feasible.
		pc = uint64(0) // program counter

		// jump evaluates and checks whether the given jump destination is a valid one
		// if valid move the `pc` otherwise return an error.
		jump = func(from uint64, to *big.Int) error {
			if !context.jumpdests.has(codehash, code, to) {
				nop := context.GetOp(to.Uint64())
				return fmt.Errorf("invalid jump destination (%v) %v", nop, to)
			}

			pc = to.Uint64()

			return nil
		}

		newMemSize *big.Int
		cost       *big.Int
	)

	// User defer pattern to check for an error and, based on the error being nil or not, use all gas and return.
	defer func() {
		if err != nil {
			self.log(pc, op, context.Gas, cost, mem, stack, context, err)
		}
	}()

	// Don't bother with the execution if there's no code.
	if len(code) == 0 {
		return context.Return(nil), nil
	}

	for {
		// Overhead of the atomic read might not be worth it
		/* TODO this still causes a few issues in the tests
		if program != nil && progStatus(atomic.LoadInt32(&program.status)) == progReady {
			// move execution
			glog.V(logger.Info).Infoln("Moved execution to JIT")
			return runProgram(program, pc, mem, stack, self.env, context, input)
		}
		*/
		// The base for all big integer arithmetic
		base := new(big.Int)

		// Get the memory location of pc
		op = context.GetOp(pc)

		// calculate the new memory size and gas price for the current executing opcode
		newMemSize, cost, err = calculateGasAndSize(self.env, context, caller, op, statedb, mem, stack)
		if err != nil {
			return nil, err
		}

		// Use the calculated gas. When insufficient gas is present, use all gas and return an
		// Out Of Gas error
		if !context.UseGas(cost) {
			return nil, OutOfGasError
		}

		// Resize the memory calculated previously
		mem.Resize(newMemSize.Uint64())
		// Add a log message
		self.log(pc, op, context.Gas, cost, mem, stack, context, nil)

		switch op {
		case ADD:
			x, y := stack.pop(), stack.pop()

			base.Add(x, y)

			U256(base)

			// pop result back on the stack
			stack.push(base)
		case SUB:
			x, y := stack.pop(), stack.pop()

			base.Sub(x, y)

			U256(base)

			// pop result back on the stack
			stack.push(base)
		case MUL:
			x, y := stack.pop(), stack.pop()

			base.Mul(x, y)

			U256(base)

			// pop result back on the stack
			stack.push(base)
		case DIV:
			x, y := stack.pop(), stack.pop()

			if y.Cmp(common.Big0) != 0 {
				base.Div(x, y)
			}

			U256(base)

			// pop result back on the stack
			stack.push(base)
		case SDIV:
			x, y := S256(stack.pop()), S256(stack.pop())

			if y.Cmp(common.Big0) == 0 {
				base.Set(common.Big0)
			} else {
				n := new(big.Int)
				if new(big.Int).Mul(x, y).Cmp(common.Big0) < 0 {
					n.SetInt64(-1)
				} else {
					n.SetInt64(1)
				}

				base.Div(x.Abs(x), y.Abs(y)).Mul(base, n)

				U256(base)
			}

			stack.push(base)
		case MOD:
			x, y := stack.pop(), stack.pop()

			if y.Cmp(common.Big0) == 0 {
				base.Set(common.Big0)
			} else {
				base.Mod(x, y)
			}

			U256(base)

			stack.push(base)
		case SMOD:
			x, y := S256(stack.pop()), S256(stack.pop())

			if y.Cmp(common.Big0) == 0 {
				base.Set(common.Big0)
			} else {
				n := new(big.Int)
				if x.Cmp(common.Big0) < 0 {
					n.SetInt64(-1)
				} else {
					n.SetInt64(1)
				}

				base.Mod(x.Abs(x), y.Abs(y)).Mul(base, n)

				U256(base)
			}

			stack.push(base)

		case EXP:
			x, y := stack.pop(), stack.pop()

			base.Exp(x, y, Pow256)

			U256(base)

			stack.push(base)
		case SIGNEXTEND:
			back := stack.pop()
			if back.Cmp(big.NewInt(31)) < 0 {
				bit := uint(back.Uint64()*8 + 7)
				num := stack.pop()
				mask := new(big.Int).Lsh(common.Big1, bit)
				mask.Sub(mask, common.Big1)
				if common.BitTest(num, int(bit)) {
					num.Or(num, mask.Not(mask))
				} else {
					num.And(num, mask)
				}

				num = U256(num)

				stack.push(num)
			}
		case NOT:
			stack.push(U256(new(big.Int).Not(stack.pop())))
		case LT:
			x, y := stack.pop(), stack.pop()

			// x < y
			if x.Cmp(y) < 0 {
				stack.push(common.BigTrue)
			} else {
				stack.push(common.BigFalse)
			}
		case GT:
			x, y := stack.pop(), stack.pop()

			// x > y
			if x.Cmp(y) > 0 {
				stack.push(common.BigTrue)
			} else {
				stack.push(common.BigFalse)
			}

		case SLT:
			x, y := S256(stack.pop()), S256(stack.pop())

			// x < y
			if x.Cmp(S256(y)) < 0 {
				stack.push(common.BigTrue)
			} else {
				stack.push(common.BigFalse)
			}
		case SGT:
			x, y := S256(stack.pop()), S256(stack.pop())

			// x > y
			if x.Cmp(y) > 0 {
				stack.push(common.BigTrue)
			} else {
				stack.push(common.BigFalse)
			}

		case EQ:
			x, y := stack.pop(), stack.pop()

			// x == y
			if x.Cmp(y) == 0 {
				stack.push(common.BigTrue)
			} else {
				stack.push(common.BigFalse)
			}
		case ISZERO:
			x := stack.pop()
			if x.Cmp(common.BigFalse) > 0 {
				stack.push(common.BigFalse)
			} else {
				stack.push(common.BigTrue)
			}

		case AND:
			x, y := stack.pop(), stack.pop()

			stack.push(base.And(x, y))
		case OR:
			x, y := stack.pop(), stack.pop()

			stack.push(base.Or(x, y))
		case XOR:
			x, y := stack.pop(), stack.pop()

			stack.push(base.Xor(x, y))
		case BYTE:
			th, val := stack.pop(), stack.pop()

			if th.Cmp(big.NewInt(32)) < 0 {
				byt := big.NewInt(int64(common.LeftPadBytes(val.Bytes(), 32)[th.Int64()]))

				base.Set(byt)
			} else {
				base.Set(common.BigFalse)
			}

			stack.push(base)
		case ADDMOD:
			x := stack.pop()
			y := stack.pop()
			z := stack.pop()

			if z.Cmp(Zero) > 0 {
				add := new(big.Int).Add(x, y)
				base.Mod(add, z)

				base = U256(base)
			}

			stack.push(base)
		case MULMOD:
			x := stack.pop()
			y := stack.pop()
			z := stack.pop()

			if z.Cmp(Zero) > 0 {
				mul := new(big.Int).Mul(x, y)
				base.Mod(mul, z)

				U256(base)
			}

			stack.push(base)

		case SHA3:
			offset, size := stack.pop(), stack.pop()
			data := crypto.Sha3(mem.Get(offset.Int64(), size.Int64()))

			stack.push(common.BigD(data))

		case ADDRESS:
			stack.push(common.Bytes2Big(context.Address().Bytes()))

		case BALANCE:
			addr := common.BigToAddress(stack.pop())
			balance := statedb.GetBalance(addr)

			stack.push(new(big.Int).Set(balance))

		case ORIGIN:
			origin := self.env.Origin()

			stack.push(origin.Big())

		case CALLER:
			caller := context.caller.Address()
			stack.push(common.Bytes2Big(caller.Bytes()))

		case CALLVALUE:
			stack.push(new(big.Int).Set(value))

		case CALLDATALOAD:
			data := getData(input, stack.pop(), common.Big32)

			stack.push(common.Bytes2Big(data))
		case CALLDATASIZE:
			l := int64(len(input))
			stack.push(big.NewInt(l))

		case CALLDATACOPY:
			var (
				mOff = stack.pop()
				cOff = stack.pop()
				l    = stack.pop()
			)
			data := getData(input, cOff, l)

			mem.Set(mOff.Uint64(), l.Uint64(), data)

		case CODESIZE, EXTCODESIZE:
			var code []byte
			if op == EXTCODESIZE {
				addr := common.BigToAddress(stack.pop())

				code = statedb.GetCode(addr)
			} else {
				code = context.Code
			}

			l := big.NewInt(int64(len(code)))
			stack.push(l)

		case CODECOPY, EXTCODECOPY:
			var code []byte
			if op == EXTCODECOPY {
				addr := common.BigToAddress(stack.pop())
				code = statedb.GetCode(addr)
			} else {
				code = context.Code
			}

			var (
				mOff = stack.pop()
				cOff = stack.pop()
				l    = stack.pop()
			)

			codeCopy := getData(code, cOff, l)

			mem.Set(mOff.Uint64(), l.Uint64(), codeCopy)

		case GASPRICE:
			stack.push(new(big.Int).Set(context.Price))

		case BLOCKHASH:
			num := stack.pop()

			n := new(big.Int).Sub(self.env.BlockNumber(), common.Big257)
			if num.Cmp(n) > 0 && num.Cmp(self.env.BlockNumber()) < 0 {
				stack.push(self.env.GetHash(num.Uint64()).Big())
			} else {
				stack.push(common.Big0)
			}

		case COINBASE:
			coinbase := self.env.Coinbase()

			stack.push(coinbase.Big())

		case TIMESTAMP:
			time := self.env.Time()

			stack.push(new(big.Int).Set(time))

		case NUMBER:
			number := self.env.BlockNumber()

			stack.push(U256(number))

		case DIFFICULTY:
			difficulty := self.env.Difficulty()

			stack.push(new(big.Int).Set(difficulty))

		case GASLIMIT:

			stack.push(new(big.Int).Set(self.env.GasLimit()))

		case PUSH1, PUSH2, PUSH3, PUSH4, PUSH5, PUSH6, PUSH7, PUSH8, PUSH9, PUSH10, PUSH11, PUSH12, PUSH13, PUSH14, PUSH15, PUSH16, PUSH17, PUSH18, PUSH19, PUSH20, PUSH21, PUSH22, PUSH23, PUSH24, PUSH25, PUSH26, PUSH27, PUSH28, PUSH29, PUSH30, PUSH31, PUSH32:
			size := uint64(op - PUSH1 + 1)
			byts := getData(code, new(big.Int).SetUint64(pc+1), new(big.Int).SetUint64(size))
			// push value to stack
			stack.push(common.Bytes2Big(byts))
			pc += size

		case POP:
			stack.pop()
		case DUP1, DUP2, DUP3, DUP4, DUP5, DUP6, DUP7, DUP8, DUP9, DUP10, DUP11, DUP12, DUP13, DUP14, DUP15, DUP16:
			n := int(op - DUP1 + 1)
			stack.dup(n)

		case SWAP1, SWAP2, SWAP3, SWAP4, SWAP5, SWAP6, SWAP7, SWAP8, SWAP9, SWAP10, SWAP11, SWAP12, SWAP13, SWAP14, SWAP15, SWAP16:
			n := int(op - SWAP1 + 2)
			stack.swap(n)

		case LOG0, LOG1, LOG2, LOG3, LOG4:
			n := int(op - LOG0)
			topics := make([]common.Hash, n)
			mStart, mSize := stack.pop(), stack.pop()
			for i := 0; i < n; i++ {
				topics[i] = common.BigToHash(stack.pop())
			}

			data := mem.Get(mStart.Int64(), mSize.Int64())
			log := state.NewLog(context.Address(), topics, data, self.env.BlockNumber().Uint64())
			self.env.AddLog(log)

		case MLOAD:
			offset := stack.pop()
			val := common.BigD(mem.Get(offset.Int64(), 32))
			stack.push(val)

		case MSTORE:
			// pop value of the stack
			mStart, val := stack.pop(), stack.pop()
			mem.Set(mStart.Uint64(), 32, common.BigToBytes(val, 256))

		case MSTORE8:
			off, val := stack.pop().Int64(), stack.pop().Int64()

			mem.store[off] = byte(val & 0xff)

		case SLOAD:
			loc := common.BigToHash(stack.pop())
			val := statedb.GetState(context.Address(), loc).Big()
			stack.push(val)

		case SSTORE:
			loc := common.BigToHash(stack.pop())
			val := stack.pop()

			statedb.SetState(context.Address(), loc, common.BigToHash(val))

		case JUMP:
			if err := jump(pc, stack.pop()); err != nil {
				return nil, err
			}

			continue
		case JUMPI:
			pos, cond := stack.pop(), stack.pop()

			if cond.Cmp(common.BigTrue) >= 0 {
				if err := jump(pc, pos); err != nil {
					return nil, err
				}

				continue
			}

		case JUMPDEST:
		case PC:
			stack.push(new(big.Int).SetUint64(pc))
		case MSIZE:
			stack.push(big.NewInt(int64(mem.Len())))
		case GAS:
			stack.push(new(big.Int).Set(context.Gas))
		case CREATE:

			var (
				value        = stack.pop()
				offset, size = stack.pop(), stack.pop()
				input        = mem.Get(offset.Int64(), size.Int64())
				gas          = new(big.Int).Set(context.Gas)
				addr         common.Address
			)

			context.UseGas(context.Gas)
			ret, suberr, ref := self.env.Create(context, input, gas, price, value)
			if suberr != nil {
				stack.push(common.BigFalse)

			} else {
				// gas < len(ret) * CreateDataGas == NO_CODE
				dataGas := big.NewInt(int64(len(ret)))
				dataGas.Mul(dataGas, params.CreateDataGas)
				if context.UseGas(dataGas) {
					ref.SetCode(ret)
				}
				addr = ref.Address()

				stack.push(addr.Big())

			}

		case CALL, CALLCODE:
			gas := stack.pop()
			// pop gas and value of the stack.
			addr, value := stack.pop(), stack.pop()
			value = U256(value)
			// pop input size and offset
			inOffset, inSize := stack.pop(), stack.pop()
			// pop return size and offset
			retOffset, retSize := stack.pop(), stack.pop()

			address := common.BigToAddress(addr)

			// Get the arguments from the memory
			args := mem.Get(inOffset.Int64(), inSize.Int64())

			if len(value.Bytes()) > 0 {
				gas.Add(gas, params.CallStipend)
			}

			var (
				ret []byte
				err error
			)
			if op == CALLCODE {
				ret, err = self.env.CallCode(context, address, args, gas, price, value)
			} else {
				ret, err = self.env.Call(context, address, args, gas, price, value)
			}

			if err != nil {
				stack.push(common.BigFalse)

			} else {
				stack.push(common.BigTrue)

				mem.Set(retOffset.Uint64(), retSize.Uint64(), ret)
			}

		case RETURN:
			offset, size := stack.pop(), stack.pop()
			ret := mem.GetPtr(offset.Int64(), size.Int64())

			return context.Return(ret), nil
		case SUICIDE:
			receiver := statedb.GetOrNewStateObject(common.BigToAddress(stack.pop()))
			balance := statedb.GetBalance(context.Address())

			receiver.AddBalance(balance)

			statedb.Delete(context.Address())

			fallthrough
		case STOP: // Stop the context

			return context.Return(nil), nil
		default:

			return nil, fmt.Errorf("Invalid opcode %x", op)
		}

		pc++

	}
}
Exemplo n.º 16
0
func makeSeedHash(epoch uint64) (sh common.Hash) {
	for ; epoch > 0; epoch-- {
		sh = crypto.Sha3Hash(sh[:])
	}
	return sh
}