Exemplo n.º 1
0
func NewProxyServer(config *utils.Config) *ProxyServer {
	p := &ProxyServer{
		productName: config.ProductName,
		proxyAddr:   config.ProxyAddr,
		zkAdresses:  config.ZkAddr,
		verbose:     config.Verbose,
		profile:     config.Profile,
	}
	p.topo = zk.NewTopology(p.productName, p.zkAdresses)
	p.router = NewRouter(p.productName, p.topo, p.verbose)
	return p
}
Exemplo n.º 2
0
func NewThriftLoadBalanceServer(config *utils.Config) *ThriftLoadBalanceServer {
	log.Printf("FrontAddr: %s\n", Magenta(config.FrontendAddr))

	// 前端对接rpc_proxy
	p := &ThriftLoadBalanceServer{
		config:       config,
		zkAddr:       config.ZkAddr,
		productName:  config.ProductName,
		serviceName:  config.Service,
		frontendAddr: config.FrontendAddr,
		backendAddr:  config.BackAddr,
		verbose:      config.Verbose,
		exitEvt:      make(chan bool),
	}

	p.topo = zk.NewTopology(p.productName, p.zkAddr)
	p.lbServiceName = GetServiceIdentity(p.frontendAddr)

	// 后端对接: 各种python的rpc server
	p.backendService = NewBackServiceLB(p.serviceName, p.backendAddr, p.verbose, p.exitEvt)
	return p

}
Exemplo n.º 3
0
func mainBody(zkAddr string, productName string, serviceName string, frontendAddr string, backendAddr string) {
	// 1. 创建到zk的连接
	var topo *zk.Topology
	topo = zk.NewTopology(productName, zkAddr)

	// 2. 启动服务
	frontend, _ := zmq.NewSocket(zmq.ROUTER)
	backend, _ := zmq.NewSocket(zmq.ROUTER)
	defer frontend.Close()
	defer backend.Close()

	// ROUTER/ROUTER绑定到指定的端口

	// tcp://127.0.0.1:5555 --> tcp://127_0_0_1:5555
	lbServiceName := GetServiceIdentity(frontendAddr)

	frontend.SetIdentity(lbServiceName)
	frontend.Bind(frontendAddr) //  For clients "tcp://*:5555"
	backend.Bind(backendAddr)   //  For workers "tcp://*:5556"

	log.Printf("FrontAddr: %s, BackendAddr: %s\n", magenta(frontendAddr), magenta(backendAddr))

	// 后端的workers queue
	workersQueue := queue.NewPPQueue()

	// 心跳间隔1s
	heartbeat_at := time.Tick(HEARTBEAT_INTERVAL)

	poller1 := zmq.NewPoller()
	poller1.Add(backend, zmq.POLLIN)

	poller2 := zmq.NewPoller()
	// 前提:
	//     1. 当zeromq通知消息可读时,那么整个Message(所有的msg parts)都可读
	//	   2. 往zeromq写数据时,是异步的,因此也不存在block(除非数据量巨大)
	//
	poller2.Add(backend, zmq.POLLIN)
	poller2.Add(frontend, zmq.POLLIN)

	// 3. 注册zk
	var endpointInfo map[string]interface{} = make(map[string]interface{})
	endpointInfo["frontend"] = frontendAddr
	endpointInfo["backend"] = backendAddr

	topo.AddServiceEndPoint(serviceName, lbServiceName, endpointInfo)

	isAlive := true
	isAliveLock := &sync.RWMutex{}

	go func() {
		servicePath := topo.ProductServicePath(serviceName)
		evtbus := make(chan interface{})
		for true {
			// 只是为了监控状态
			_, err := topo.WatchNode(servicePath, evtbus)

			if err == nil {
				// 等待事件
				e := (<-evtbus).(topozk.Event)
				if e.State == topozk.StateExpired || e.Type == topozk.EventNotWatching {
					// Session过期了,则需要删除之前的数据,因为这个数据的Owner不是当前的Session
					topo.DeleteServiceEndPoint(serviceName, lbServiceName)
					topo.AddServiceEndPoint(serviceName, lbServiceName, endpointInfo)
				}
			} else {
				time.Sleep(time.Second)
			}

			isAliveLock.RLock()
			isAlive1 := isAlive
			isAliveLock.RUnlock()
			if !isAlive1 {
				break
			}

		}
	}()

	ch := make(chan os.Signal, 1)

	signal.Notify(ch, syscall.SIGTERM, syscall.SIGINT, syscall.SIGKILL)
	// syscall.SIGKILL
	// kill -9 pid
	// kill -s SIGKILL pid 还是留给运维吧
	//

	// 自动退出条件:
	//

	var suideTime time.Time

	for {
		var sockets []zmq.Polled
		var err error

		sockets, err = poller2.Poll(HEARTBEAT_INTERVAL)
		if err != nil {
			//			break //  Interrupted
			log.Errorf("Error When Pollling: %v\n", err)
			continue
		}

		hasValidMsg := false
		for _, socket := range sockets {
			switch socket.Socket {
			case backend:
				// 格式:
				// 后端:
				// 	             <"", proxy_id, "", client_id, "", rpc_data>
				// Backend Socket读取到的:
				//		<wokerid, "", proxy_id, "", client_id, "", rpc_data>
				//
				msgs, err := backend.RecvMessage(0)
				if err != nil {
					log.Errorf("Error When RecvMessage from background: %v\n", err)
					continue
				}
				if config.VERBOSE {
					// log.Println("Message from backend: ", msgs)
				}
				// 消息类型:
				// msgs: <worker_id, "", proxy_id, "", client_id, "", rpc_data>
				//       <worker_id, "", rpc_control_data>
				worker_id, msgs := utils.Unwrap(msgs)

				// rpc_control_data 控制信息
				// msgs: <rpc_control_data>
				if len(msgs) == 1 {
					// PPP_READY
					// PPP_HEARTBEAT
					controlMsg := msgs[0]

					// 碰到无效的信息,则直接跳过去
					if len(controlMsg) == 0 {
						continue
					}
					if config.VERBOSE {
						// log.Println("Got Message From Backend...")
					}

					if controlMsg[0] == PPP_READY || controlMsg[0] == PPP_HEARTBEAT {
						// 后端服务剩余的并发能力
						var concurrency int
						if len(controlMsg) >= 3 {
							concurrency = int(controlMsg[2])
						} else {
							concurrency = 1
						}
						if config.VERBOSE {
							// utils.PrintZeromqMsgs(msgs, "control msg")
						}

						force_update := controlMsg[0] == PPP_READY
						workersQueue.UpdateWorkerStatus(worker_id, concurrency, force_update)
					} else if controlMsg[0] == PPP_STOP {
						// 停止指定的后端服务
						workersQueue.UpdateWorkerStatus(worker_id, -1, true)
					} else {
						log.Errorf("Unexpected Control Message: %d", controlMsg[0])
					}
				} else {
					hasValidMsg = true
					// 将信息发送到前段服务, 如果前端服务挂了,则消息就丢失
					//					log.Println("Send Message to frontend")
					workersQueue.UpdateWorkerStatus(worker_id, 0, false)
					// msgs: <proxy_id, "", client_id, "", rpc_data>
					frontend.SendMessage(msgs)
				}
			case frontend:
				hasValidMsg = true
				log.Println("----->Message from front: ")
				msgs, err := frontend.RecvMessage(0)
				if err != nil {
					log.Errorf("Error when reading from frontend: %v\n", err)
					continue
				}

				// msgs:
				// <proxy_id, "", client_id, "", rpc_data>
				if config.VERBOSE {
					utils.PrintZeromqMsgs(msgs, "frontend")
				}
				msgs = utils.TrimLeftEmptyMsg(msgs)

				// 将msgs交给后端服务器
				worker := workersQueue.NextWorker()
				if worker != nil {
					if config.VERBOSE {
						log.Println("Send Msg to Backend worker: ", worker.Identity)
					}
					backend.SendMessage(worker.Identity, "", msgs)
				} else {
					// 怎么返回错误消息呢?
					if config.VERBOSE {
						log.Println("No backend worker found")
					}
					errMsg := proxy.GetWorkerNotFoundData("account", 0)

					// <proxy_id, "", client_id, "", rpc_data>
					frontend.SendMessage(msgs[0:(len(msgs)-1)], errMsg)
				}
			}
		}

		// 如果安排的suiside, 则需要处理 suiside的时间
		isAliveLock.RLock()
		isAlive1 := isAlive
		isAliveLock.RUnlock()

		if !isAlive1 {
			if hasValidMsg {
				suideTime = time.Now().Add(time.Second * 3)
			} else {
				if time.Now().After(suideTime) {
					log.Println(utils.Green("Load Balance Suiside Gracefully"))
					break
				}
			}
		}

		// 心跳同步
		select {
		case <-heartbeat_at:
			now := time.Now()

			// 给workerQueue中的所有的worker发送心跳消息
			for _, worker := range workersQueue.WorkerQueue {
				if worker.Expire.After(now) {
					//					log.Println("Sending Hb to Worker: ", worker.Identity)
					backend.SendMessage(worker.Identity, "", PPP_HEARTBEAT_STR)
				}
			}

			workersQueue.PurgeExpired()
		case sig := <-ch:
			isAliveLock.Lock()
			isAlive1 := isAlive
			isAlive = false
			isAliveLock.Unlock()

			if isAlive1 {
				// 准备退出(但是需要处理完毕手上的活)

				// 需要退出:
				topo.DeleteServiceEndPoint(serviceName, lbServiceName)

				if sig == syscall.SIGKILL {
					log.Println(utils.Red("Got Kill Signal, Return Directly"))
					break
				} else {
					suideTime = time.Now().Add(time.Second * 3)
					log.Println(utils.Red("Schedule to suicide at: "), suideTime.Format("@2006-01-02 15:04:05"))
				}
			}
		default:
		}
	}
}
Exemplo n.º 4
0
//
// 两参数是必须的:  ProductName, zkAddress, frontAddr可以用来测试
//
func mainBody(productName string, frontAddr string, zkAdresses string) {
	// 1. 创建到zk的连接
	var topo *zk.Topology
	topo = zk.NewTopology(productName, zkAdresses)

	// 3. 读取后端服务的配置
	poller := zmq.NewPoller()
	backServices := proxy.NewBackServices(poller, productName, topo)

	// 4. 创建前端服务
	frontend, _ := zmq.NewSocket(zmq.ROUTER)
	defer frontend.Close()

	// ROUTER/ROUTER绑定到指定的端口
	log.Println("---->Bind: ", magenta(frontAddr))
	frontend.Bind(frontAddr) //  For clients

	// 开始监听前端服务
	poller.Add(frontend, zmq.POLLIN)

	for {
		var sockets []zmq.Polled
		var err error

		sockets, err = poller.Poll(HEARTBEAT_INTERVAL)

		if err != nil {
			log.Println("Encounter Errors, Services Stoped: ", err)
			continue
		}

		for _, socket := range sockets {
			switch socket.Socket {

			case frontend:
				if config.VERBOSE {
					log.Println("----->Message from front: ")
				}
				msgs, err := frontend.RecvMessage(0)

				if err != nil {
					continue //  Interrupted
				}
				var service string
				var client_id string

				utils.PrintZeromqMsgs(msgs, "ProxyFrontEnd")

				// msg格式: <client_id, '', service,  '', other_msgs>
				client_id, msgs = utils.Unwrap(msgs)
				service, msgs = utils.Unwrap(msgs)

				//				log.Println("Client_id: ", client_id, ", Service: ", service)

				backService := backServices.GetBackService(service)

				if backService == nil {
					log.Println("BackService Not Found...")
					// 最后一个msg为Thrift编码后的消息
					thriftMsg := msgs[len(msgs)-1]
					// XXX: seqId如果不需要,也可以使用固定的数字
					_, _, seqId, _ := proxy.ParseThriftMsgBegin([]byte(thriftMsg))
					errMsg := proxy.GetServiceNotFoundData(service, seqId)

					// <client_id, "", errMsg>
					if len(msgs) > 1 {
						frontend.SendMessage(client_id, "", msgs[0:len(msgs)-1], errMsg)
					} else {
						frontend.SendMessage(client_id, "", errMsg)
					}

				} else {
					// <"", client_id, "", msgs>
					if config.PROFILE {
						lastMsg := msgs[len(msgs)-1]
						msgs = msgs[0 : len(msgs)-1]
						msgs = append(msgs, fmt.Sprintf("%.4f", float64(time.Now().UnixNano())*1e-9), "", lastMsg)
						if config.VERBOSE {
							log.Println(printList(msgs))
						}
					}
					total, err, errMsg := backService.HandleRequest(client_id, msgs)
					if errMsg != nil {
						if config.VERBOSE {
							log.Println("backService Error for service: ", service)
						}
						if len(msgs) > 1 {
							frontend.SendMessage(client_id, "", msgs[0:len(msgs)-1], *errMsg)
						} else {
							frontend.SendMessage(client_id, "", *errMsg)
						}
					} else if err != nil {
						log.Println(utils.Red("backService.HandleRequest Error: "), err, ", Total: ", total)
					}
				}
			default:
				// 除了来自前端的数据,其他的都来自后端
				msgs, err := socket.Socket.RecvMessage(0)
				if err != nil {
					log.Println("Encounter Errors When receiving from background")
					continue //  Interrupted
				}
				if config.VERBOSE {
					utils.PrintZeromqMsgs(msgs, "proxy")
				}

				msgs = utils.TrimLeftEmptyMsg(msgs)

				// msgs格式: <client_id, "", rpc_data>
				//          <control_msg_rpc_data>
				if len(msgs) == 1 {
					// 告知后端的服务可能有问题

				} else {
					if config.PROFILE {
						lastMsg := msgs[len(msgs)-1]
						msgs = msgs[0 : len(msgs)-1]
						msgs = append(msgs, fmt.Sprintf("%.4f", float64(time.Now().UnixNano())*1e-9), "", lastMsg)
					}
					if config.VERBOSE {
						log.Println(printList(msgs))
					}
					frontend.SendMessage(msgs)
				}
			}
		}
	}
}