// reset our viewport after a window resize
func resizeWindow(width, height int) {
	// protect against a divide by zero
	if height == 0 {
		height = 1
	}

	// Setup our viewport
	gl.Viewport(0, 0, width, height)

	// change to the projection matrix and set our viewing volume.
	gl.MatrixMode(gl.PROJECTION)
	gl.LoadIdentity()

	// aspect ratio
	aspect := gl.GLdouble(width / height)

	// Set our perspective.
	// This code is equivalent to using gluPerspective as in the original tutorial.
	var fov, near, far gl.GLdouble
	fov = 45.0
	near = 0.1
	far = 100.0
	top := gl.GLdouble(math.Tan(float64(fov*math.Pi/360.0))) * near
	bottom := -top
	left := aspect * bottom
	right := aspect * top
	gl.Frustum(float64(left), float64(right), float64(bottom), float64(top), float64(near), float64(far))

	// Make sure we're changing the model view and not the projection
	gl.MatrixMode(gl.MODELVIEW)

	// Reset the view
	gl.LoadIdentity()
}
Exemplo n.º 2
0
func main() {

	sdl.Init(sdl.INIT_VIDEO)

	var screen = sdl.SetVideoMode(640, 480, 32, sdl.OPENGL)

	if screen == nil {
		panic("sdl error")
	}

	if gl.Init() != 0 {
		panic("glew error")
	}

	pen := Pen{}

	gl.MatrixMode(gl.PROJECTION)

	gl.Viewport(0, 0, gl.GLsizei(screen.W), gl.GLsizei(screen.H))
	gl.LoadIdentity()
	gl.Ortho(0, gl.GLdouble(screen.W), gl.GLdouble(screen.H), 0, -1.0, 1.0)

	gl.ClearColor(1, 1, 1, 0)
	gl.Clear(gl.COLOR_BUFFER_BIT)

	var running = true

	for running {

		e := &sdl.Event{}

		for e.Poll() {
			switch e.Type {
			case sdl.QUIT:
				running = false
				break
			case sdl.KEYDOWN:
				running = false
				break
			case sdl.MOUSEMOTION:
				me := e.MouseMotion()
				if me.State != 0 {
					pen.lineTo(Point{int(me.X), int(me.Y)})
				} else {
					pen.moveTo(Point{int(me.X), int(me.Y)})
				}
				break
			}
		}

		sdl.GL_SwapBuffers()
		sdl.Delay(25)
	}

	sdl.Quit()

}
Exemplo n.º 3
0
func reshape(w, h int) {
	gl.Viewport(0, 0, gl.GLsizei(w), gl.GLsizei(h))
	gl.MatrixMode(gl.PROJECTION)
	gl.LoadIdentity()
	gl.Ortho(0, gl.GLdouble(w), 0, gl.GLdouble(h), -1, 1)
	gl.Scalef(1, -1, 1)
	gl.Translatef(0, gl.GLfloat(-h), 0)
	gl.MatrixMode(gl.MODELVIEW)
}
Exemplo n.º 4
0
func reshape(w, h int) {
	gl.Viewport(0, 0, w, h)
	gl.MatrixMode(gl.PROJECTION)
	gl.LoadIdentity()
	gl.Ortho(0, float64(w), 0, float64(h), -1, 1)
	gl.Scalef(1, -1, 1)
	gl.Translatef(0, float32(-h), 0)
	gl.MatrixMode(gl.MODELVIEW)
}
Exemplo n.º 5
0
/* new window size or exposure */
func reshape(width int, height int) {

	h := float64(height) / float64(width)

	gl.Viewport(0, 0, width, height)
	gl.MatrixMode(gl.PROJECTION)
	gl.LoadIdentity()
	gl.Frustum(-1.0, 1.0, -h, h, 5.0, 60.0)
	gl.MatrixMode(gl.MODELVIEW)
	gl.LoadIdentity()
	gl.Translatef(0.0, 0.0, -40.0)
}
Exemplo n.º 6
0
func main() {

	sdl.Init(sdl.INIT_VIDEO)

	var screen = sdl.SetVideoMode(640, 480, 32, sdl.OPENGL)

	if screen == nil {
		panic("sdl error")
	}

	if gl.Init() != 0 {
		panic("gl error")
	}

	pen := Pen{}

	gl.MatrixMode(gl.PROJECTION)

	gl.Viewport(0, 0, int(screen.W), int(screen.H))
	gl.LoadIdentity()
	gl.Ortho(0, float64(screen.W), float64(screen.H), 0, -1.0, 1.0)

	gl.ClearColor(1, 1, 1, 0)
	gl.Clear(gl.COLOR_BUFFER_BIT)

	var running = true

	for running {

		for e := sdl.PollEvent(); e != nil; e = sdl.PollEvent() {
			switch ev := e.(type) {
			case *sdl.QuitEvent:
				running = false
			case *sdl.KeyboardEvent:
				if ev.Keysym.Sym == sdl.K_ESCAPE {
					running = false
				}
			case *sdl.MouseMotionEvent:
				if ev.State != 0 {
					pen.lineTo(Point{int(ev.X), int(ev.Y)})
				} else {
					pen.moveTo(Point{int(ev.X), int(ev.Y)})
				}
			}
		}

		sdl.GL_SwapBuffers()
		sdl.Delay(25)
	}

	sdl.Quit()

}
Exemplo n.º 7
0
func reshape(w, h int) {
	if h == 0 {
		h = 1
	}
	gl.Viewport(0, 0, w, h)
	gl.MatrixMode(gl.PROJECTION)
	gl.LoadIdentity()
	glu.Perspective(45.0, float64(w)/float64(h), 0.1, 100.0)
	gl.MatrixMode(gl.MODELVIEW)
	gl.LoadIdentity()
	resetZoom()
}
Exemplo n.º 8
0
func reshape(w, h int) {
	/* Because Gil specified "screen coordinates" (presumably with an
	   upper-left origin), this short bit of code sets up the coordinate
	   system to correspond to actual window coodrinates.  This code
	   wouldn't be required if you chose a (more typical in 3D) abstract
	   coordinate system. */

	gl.Viewport(0, 0, w, h)                       /* Establish viewing area to cover entire window. */
	gl.MatrixMode(gl.PROJECTION)                  /* Start modifying the projection matrix. */
	gl.LoadIdentity()                             /* Reset project matrix. */
	gl.Ortho(0, float64(w), 0, float64(h), -1, 1) /* Map abstract coords directly to window coords. */
	gl.Scalef(1, -1, 1)                           /* Invert Y axis so increasing Y goes down. */
	gl.Translatef(0, float32(-h), 0)              /* Shift origin up to upper-left corner. */
}
Exemplo n.º 9
0
func reshape(w, h int) {
	/* Because Gil specified "screen coordinates" (presumably with an
	   upper-left origin), this short bit of code sets up the coordinate
	   system to correspond to actual window coodrinates.  This code
	   wouldn't be required if you chose a (more typical in 3D) abstract
	   coordinate system. */
	gl.ClearColor(1, 1, 1, 1)
	//fmt.Println(gl.GetString(gl.EXTENSIONS))
	gl.Viewport(0, 0, w, h)                       /* Establish viewing area to cover entire window. */
	gl.MatrixMode(gl.PROJECTION)                  /* Start modifying the projection matrix. */
	gl.LoadIdentity()                             /* Reset project matrix. */
	gl.Ortho(0, float64(w), 0, float64(h), -1, 1) /* Map abstract coords directly to window coords. */
	gl.Scalef(1, -1, 1)                           /* Invert Y axis so increasing Y goes down. */
	gl.Translatef(0, float32(-h), 0)              /* Shift origin up to upper-left corner. */
	gl.Enable(gl.BLEND)
	gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
	gl.Disable(gl.DEPTH_TEST)
	width, height = w, h
}
Exemplo n.º 10
0
func (self *Camera) Setup() {
	d := self.Distance
	Angle := self.Angle
	Angle360 := Angle.Scale(1 / math.Pi * 180)
	TargetPos := self.Target.Pos

	gl.MatrixMode(gl.PROJECTION)
	gl.LoadIdentity()
	gl.Viewport(0, 0, 800, 600)
	gl.Frustum(-1, 1, -1, 1, 4, 1000)

	gl.MatrixMode(gl.MODELVIEW)
	gl.LoadIdentity()
	gl.Translatef(0, 0, -d)
	gl.Rotatef(Angle360.Y, 1, 0, 0)
	gl.Rotatef(Angle360.X, 0, 1, 0)
	gl.Translatef(-TargetPos.X, -TargetPos.Y, -TargetPos.Z)

}
Exemplo n.º 11
0
func ResizeWindow(w int32, h int32) {
	// resizeWindow
	gl.MatrixMode(gl.PROJECTION)
	gl.Viewport(0, 0, gl.GLsizei(w), gl.GLsizei(h))
	gl.LoadIdentity()

	//	glu.Perspective( 45.0, ratio, 0.1, 100.0)

	aspect := gl.GLdouble(w) / gl.GLdouble(h)
	zNear := gl.GLdouble(0.1)
	zFar := gl.GLdouble(100.0)

	gl.Frustum(-NearHeight*aspect,
		NearHeight*aspect,
		-NearHeight,
		NearHeight, zNear, zFar)

	gl.MatrixMode(gl.MODELVIEW)
	gl.LoadIdentity()

	WinW = int(w)
	WinH = int(h)

}
Exemplo n.º 12
0
func main() {
	runtime.LockOSThread()
	flag.Parse()
	buildPalette()
	sdl.Init(sdl.INIT_VIDEO)
	defer sdl.Quit()

	sdl.GL_SetAttribute(sdl.GL_SWAP_CONTROL, 1)

	if sdl.SetVideoMode(512, 512, 32, sdl.OPENGL) == nil {
		panic("sdl error")
	}

	if gl.Init() != 0 {
		panic("gl error")
	}

	sdl.WM_SetCaption("Gomandel", "Gomandel")

	gl.Enable(gl.TEXTURE_2D)
	gl.Viewport(0, 0, 512, 512)
	gl.MatrixMode(gl.PROJECTION)
	gl.LoadIdentity()
	gl.Ortho(0, 512, 512, 0, -1, 1)

	gl.ClearColor(0, 0, 0, 0)

	//-----------------------------------------------------------------------------
	var dndDragging bool = false
	var dndStart Point
	var dndEnd Point
	var tex gl.Texture
	var tc TexCoords
	var lastProgress int
	initialRect := Rect{-1.5, -1.5, 3, 3}
	rect := initialRect

	rc := new(MandelbrotRequest)
	rc.MakeRequest(512, 512, rect)
	rc.WaitFor(Small, &tex, &tc)

	running := true
	e := new(sdl.Event)
	for running {
		for e.Poll() {
			switch e.Type {
			case sdl.QUIT:
				running = false
			case sdl.MOUSEBUTTONDOWN:
				dndDragging = true
				sdl.GetMouseState(&dndStart.X, &dndStart.Y)
				dndEnd = dndStart
			case sdl.MOUSEBUTTONUP:
				dndDragging = false
				sdl.GetMouseState(&dndEnd.X, &dndEnd.Y)
				if e.MouseButton().Button == 3 {
					rect = initialRect
				} else {
					rect = rectFromSelection(dndStart, dndEnd, 512, 512, rect)
					tc = texCoordsFromSelection(dndStart, dndEnd, 512, 512, tc)
				}

				// make request
				rc.MakeRequest(512, 512, rect)
			case sdl.MOUSEMOTION:
				if dndDragging {
					sdl.GetMouseState(&dndEnd.X, &dndEnd.Y)
				}
			}
		}

		// if we're waiting for a result, check if it's ready
		p := rc.Update(&tex, &tc)
		if p != -1 {
			lastProgress = p
		}

		gl.Clear(gl.COLOR_BUFFER_BIT)
		tex.Bind(gl.TEXTURE_2D)
		drawQuad(0, 0, 512, 512, tc.TX, tc.TY, tc.TX2, tc.TY2)
		gl.BindTexture(gl.TEXTURE_2D, 0)
		if dndDragging {
			drawSelection(dndStart, dndEnd)
		}
		drawProgress(512, 512, lastProgress, rc.Pending)
		sdl.GL_SwapBuffers()
	}
}
Exemplo n.º 13
0
func main() {
	runtime.LockOSThread()
	flag.Parse()
	sdl.Init(sdl.INIT_VIDEO)
	defer sdl.Quit()

	sdl.GL_SetAttribute(sdl.GL_SWAP_CONTROL, 1)

	if sdl.SetVideoMode(640, 480, 32, sdl.OPENGL) == nil {
		panic("sdl error")
	}

	sdl.WM_SetCaption("Gotris", "Gotris")
	sdl.EnableKeyRepeat(250, 45)

	gl.Enable(gl.TEXTURE_2D)
	gl.Enable(gl.BLEND)
	gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
	gl.Viewport(0, 0, 640, 480)
	gl.MatrixMode(gl.PROJECTION)
	gl.LoadIdentity()
	gl.Ortho(0, 640, 480, 0, -1, 1)

	gl.ClearColor(0, 0, 0, 0)

	//-----------------------------------------------------------------------------

	font, err := LoadFontFromFile("dejavu.font")
	if err != nil {
		panic(err)
	}

	rand.Seed(int64(sdl.GetTicks()))

	gs := NewGameSession(*initLevel, font)
	lastTime := sdl.GetTicks()

	running := true
	for running {
		for ev := sdl.PollEvent(); ev != nil; ev = sdl.PollEvent() {
			switch e := ev.(type) {
			case *sdl.QuitEvent:
				running = false
			case *sdl.KeyboardEvent:
				if e.Type == sdl.KEYDOWN {
					running = gs.HandleKey(e.Keysym.Sym)
				}
			}
		}

		now := sdl.GetTicks()
		delta := now - lastTime
		lastTime = now

		gs.Update(delta)

		gl.Clear(gl.COLOR_BUFFER_BIT)
		font.Draw(5, 5, fmt.Sprintf("Level: %d | Score: %d", gs.Level, gs.Score))
		gs.Draw()
		gl.Color3ub(255, 255, 255)
		sdl.GL_SwapBuffers()
	}
}
Exemplo n.º 14
0
func (gd *openGLGraphicsDevice) SetViewport(x, y, w, h int) {
	gl.Viewport(x, y, w, h)
}
Exemplo n.º 15
0
func onResize(w, h int) {
	ScreenWidth = w
	ScreenHeight = h
	gl.Viewport(0, 0, ScreenWidth, ScreenHeight)
}