// sendRequest writes out various information of an RPC such as Context and Message.
func sendRequest(ctx context.Context, codec Codec, compressor Compressor, callHdr *transport.CallHdr, t transport.ClientTransport, args interface{}, opts *transport.Options) (_ *transport.Stream, err error) {
stream, err := t.NewStream(ctx, callHdr)
if err != nil {
return nil, err
}
defer func() {
if err != nil {
// If err is connection error, t will be closed, no need to close stream here.
if _, ok := err.(transport.ConnectionError); !ok {
t.CloseStream(stream, err)
}
}
}()
var cbuf *bytes.Buffer
if compressor != nil {
cbuf = new(bytes.Buffer)
}
outBuf, err := encode(codec, args, compressor, cbuf)
if err != nil {
return nil, transport.StreamErrorf(codes.Internal, "grpc: %v", err)
}
err = t.Write(stream, outBuf, opts)
// t.NewStream(...) could lead to an early rejection of the RPC (e.g., the service/method
// does not exist.) so that t.Write could get io.EOF from wait(...). Leave the following
// recvResponse to get the final status.
if err != nil && err != io.EOF {
return nil, err
}
// Sent successfully.
return stream, nil
}
// sendRequest writes out various information of an RPC such as Context and Message.
func sendRequest(ctx context.Context, codec Codec, compressor Compressor, callHdr *transport.CallHdr, t transport.ClientTransport, args interface{}, opts *transport.Options) (_ *transport.Stream, err error) {
stream, err := t.NewStream(ctx, callHdr)
if err != nil {
return nil, err
}
defer func() {
if err != nil {
if _, ok := err.(transport.ConnectionError); !ok {
t.CloseStream(stream, err)
}
}
}()
var cbuf *bytes.Buffer
if compressor != nil {
cbuf = new(bytes.Buffer)
}
outBuf, err := encode(codec, args, compressor, cbuf)
if err != nil {
return nil, transport.StreamErrorf(codes.Internal, "grpc: %v", err)
}
err = t.Write(stream, outBuf, opts)
if err != nil {
return nil, err
}
// Sent successfully.
return stream, nil
}
// recvResponse receives and parses an RPC response.
// On error, it returns the error and indicates whether the call should be retried.
//
// TODO(zhaoq): Check whether the received message sequence is valid.
func recvResponse(dopts dialOptions, t transport.ClientTransport, c *callInfo, stream *transport.Stream, reply interface{}) error {
// Try to acquire header metadata from the server if there is any.
var err error
defer func() {
if err != nil {
if _, ok := err.(transport.ConnectionError); !ok {
t.CloseStream(stream, err)
}
}
}()
c.headerMD, err = stream.Header()
if err != nil {
return err
}
p := &parser{r: stream}
for {
if err = recv(p, dopts.codec, stream, dopts.dc, reply, math.MaxInt32); err != nil {
if err == io.EOF {
break
}
return err
}
}
c.trailerMD = stream.Trailer()
return nil
}
// sendRequest writes out various information of an RPC such as Context and Message.
func sendRequest(ctx context.Context, codec Codec, callHdr *transport.CallHdr, t transport.ClientTransport, args interface{}, opts *transport.Options) (_ *transport.Stream, err error) {
stream, err := t.NewStream(ctx, callHdr)
if err != nil {
return nil, err
}
defer func() {
if err != nil {
if _, ok := err.(transport.ConnectionError); !ok {
t.CloseStream(stream, err)
}
}
}()
// TODO(zhaoq): Support compression.
outBuf, err := encode(codec, args, compressionNone)
if err != nil {
return nil, transport.StreamErrorf(codes.Internal, "grpc: %v", err)
}
err = t.Write(stream, outBuf, opts)
if err != nil {
return nil, err
}
// Sent successfully.
return stream, nil
}
// recvResponse receives and parses an RPC response.
// On error, it returns the error and indicates whether the call should be retried.
//
// TODO(zhaoq): Check whether the received message sequence is valid.
// TODO ctx is used for stats collection and processing. It is the context passed from the application.
func recvResponse(ctx context.Context, dopts dialOptions, t transport.ClientTransport, c *callInfo, stream *transport.Stream, reply interface{}) (err error) {
// Try to acquire header metadata from the server if there is any.
defer func() {
if err != nil {
if _, ok := err.(transport.ConnectionError); !ok {
t.CloseStream(stream, err)
}
}
}()
c.headerMD, err = stream.Header()
if err != nil {
return
}
p := &parser{r: stream}
var inPayload *stats.InPayload
if stats.On() {
inPayload = &stats.InPayload{
Client: true,
}
}
for {
if err = recv(p, dopts.codec, stream, dopts.dc, reply, math.MaxInt32, inPayload); err != nil {
if err == io.EOF {
break
}
return
}
}
if inPayload != nil && err == io.EOF && stream.StatusCode() == codes.OK {
// TODO in the current implementation, inTrailer may be handled before inPayload in some cases.
// Fix the order if necessary.
stats.Handle(ctx, inPayload)
}
c.trailerMD = stream.Trailer()
return nil
}
// Invoke sends the RPC request on the wire and returns after response is received.
// Invoke is called by generated code. Also users can call Invoke directly when it
// is really needed in their use cases.
func Invoke(ctx context.Context, method string, args, reply interface{}, cc *ClientConn, opts ...CallOption) (err error) {
c := defaultCallInfo
for _, o := range opts {
if err := o.before(&c); err != nil {
return toRPCErr(err)
}
}
defer func() {
for _, o := range opts {
o.after(&c)
}
}()
if EnableTracing {
c.traceInfo.tr = trace.New("grpc.Sent."+methodFamily(method), method)
defer c.traceInfo.tr.Finish()
c.traceInfo.firstLine.client = true
if deadline, ok := ctx.Deadline(); ok {
c.traceInfo.firstLine.deadline = deadline.Sub(time.Now())
}
c.traceInfo.tr.LazyLog(&c.traceInfo.firstLine, false)
// TODO(dsymonds): Arrange for c.traceInfo.firstLine.remoteAddr to be set.
defer func() {
if err != nil {
c.traceInfo.tr.LazyLog(&fmtStringer{"%v", []interface{}{err}}, true)
c.traceInfo.tr.SetError()
}
}()
}
topts := &transport.Options{
Last: true,
Delay: false,
}
for {
var (
err error
t transport.ClientTransport
stream *transport.Stream
// Record the put handler from Balancer.Get(...). It is called once the
// RPC has completed or failed.
put func()
)
// TODO(zhaoq): Need a formal spec of fail-fast.
callHdr := &transport.CallHdr{
Host: cc.authority,
Method: method,
}
if cc.dopts.cp != nil {
callHdr.SendCompress = cc.dopts.cp.Type()
}
gopts := BalancerGetOptions{
BlockingWait: !c.failFast,
}
t, put, err = cc.getTransport(ctx, gopts)
if err != nil {
// TODO(zhaoq): Probably revisit the error handling.
if _, ok := err.(*rpcError); ok {
return err
}
if err == errConnClosing {
if c.failFast {
return Errorf(codes.Unavailable, "%v", errConnClosing)
}
continue
}
// All the other errors are treated as Internal errors.
return Errorf(codes.Internal, "%v", err)
}
if c.traceInfo.tr != nil {
c.traceInfo.tr.LazyLog(&payload{sent: true, msg: args}, true)
}
stream, err = sendRequest(ctx, cc.dopts.codec, cc.dopts.cp, callHdr, t, args, topts)
if err != nil {
if put != nil {
put()
put = nil
}
if _, ok := err.(transport.ConnectionError); ok {
if c.failFast {
return toRPCErr(err)
}
continue
}
return toRPCErr(err)
}
// Receive the response
err = recvResponse(cc.dopts, t, &c, stream, reply)
if err != nil {
if put != nil {
put()
put = nil
}
if _, ok := err.(transport.ConnectionError); ok {
if c.failFast {
return toRPCErr(err)
}
continue
}
t.CloseStream(stream, err)
return toRPCErr(err)
}
if c.traceInfo.tr != nil {
c.traceInfo.tr.LazyLog(&payload{sent: false, msg: reply}, true)
}
t.CloseStream(stream, nil)
if put != nil {
put()
put = nil
}
return Errorf(stream.StatusCode(), "%s", stream.StatusDesc())
}
}
// Invoke is called by the generated code. It sends the RPC request on the
// wire and returns after response is received.
func Invoke(ctx context.Context, method string, args, reply interface{}, cc *ClientConn, opts ...CallOption) (err error) {
var c callInfo
for _, o := range opts {
if err := o.before(&c); err != nil {
return toRPCErr(err)
}
}
defer func() {
for _, o := range opts {
o.after(&c)
}
}()
if EnableTracing {
c.traceInfo.tr = trace.New("grpc.Sent."+methodFamily(method), method)
defer c.traceInfo.tr.Finish()
c.traceInfo.firstLine.client = true
if deadline, ok := ctx.Deadline(); ok {
c.traceInfo.firstLine.deadline = deadline.Sub(time.Now())
}
c.traceInfo.tr.LazyLog(&c.traceInfo.firstLine, false)
// TODO(dsymonds): Arrange for c.traceInfo.firstLine.remoteAddr to be set.
defer func() {
if err != nil {
c.traceInfo.tr.LazyLog(&fmtStringer{"%v", []interface{}{err}}, true)
c.traceInfo.tr.SetError()
}
}()
}
topts := &transport.Options{
Last: true,
Delay: false,
}
var (
lastErr error // record the error that happened
)
for {
var (
err error
t transport.ClientTransport
stream *transport.Stream
)
// TODO(zhaoq): Need a formal spec of retry strategy for non-failfast rpcs.
if lastErr != nil && c.failFast {
return toRPCErr(lastErr)
}
callHdr := &transport.CallHdr{
Host: cc.authority,
Method: method,
}
t, err = cc.dopts.picker.Pick(ctx)
if err != nil {
if lastErr != nil {
// This was a retry; return the error from the last attempt.
return toRPCErr(lastErr)
}
return toRPCErr(err)
}
if c.traceInfo.tr != nil {
c.traceInfo.tr.LazyLog(&payload{sent: true, msg: args}, true)
}
stream, err = sendRequest(ctx, cc.dopts.codec, callHdr, t, args, topts)
if err != nil {
if _, ok := err.(transport.ConnectionError); ok {
lastErr = err
continue
}
if lastErr != nil {
return toRPCErr(lastErr)
}
return toRPCErr(err)
}
// Receive the response
lastErr = recvResponse(cc.dopts.codec, t, &c, stream, reply)
if _, ok := lastErr.(transport.ConnectionError); ok {
continue
}
if c.traceInfo.tr != nil {
c.traceInfo.tr.LazyLog(&payload{sent: false, msg: reply}, true)
}
t.CloseStream(stream, lastErr)
if lastErr != nil {
return toRPCErr(lastErr)
}
return Errorf(stream.StatusCode(), stream.StatusDesc())
}
}
// Invoke is called by the generated code. It sends the RPC request on the
// wire and returns after response is received.
func Invoke(ctx context.Context, method string, args, reply proto.Message, cc *ClientConn, opts ...CallOption) error {
var c callInfo
for _, o := range opts {
if err := o.before(&c); err != nil {
return toRPCErr(err)
}
}
defer func() {
for _, o := range opts {
o.after(&c)
}
}()
host, _, err := net.SplitHostPort(cc.target)
if err != nil {
return toRPCErr(err)
}
callHdr := &transport.CallHdr{
Host: host,
Method: method,
}
topts := &transport.Options{
Last: true,
Delay: false,
}
ts := 0
var lastErr error // record the error that happened
for {
var (
err error
t transport.ClientTransport
stream *transport.Stream
)
// TODO(zhaoq): Need a formal spec of retry strategy for non-failfast rpcs.
if lastErr != nil && c.failFast {
return lastErr
}
t, ts, err = cc.wait(ctx, ts)
if err != nil {
if lastErr != nil {
// This was a retry; return the error from the last attempt.
return lastErr
}
return err
}
stream, err = sendRPC(ctx, callHdr, t, args, topts)
if err != nil {
if _, ok := err.(transport.ConnectionError); ok {
lastErr = err
continue
}
if lastErr != nil {
return toRPCErr(lastErr)
}
return toRPCErr(err)
}
// Receive the response
lastErr = recv(t, &c, stream, reply)
if _, ok := lastErr.(transport.ConnectionError); ok {
continue
}
t.CloseStream(stream, lastErr)
if lastErr != nil {
return toRPCErr(lastErr)
}
return Errorf(stream.StatusCode(), stream.StatusDesc())
}
}
// Invoke is called by the generated code. It sends the RPC request on the
// wire and returns after response is received.
func Invoke(ctx context.Context, method string, args, reply interface{}, cc *ClientConn, opts ...CallOption) error {
var c callInfo
for _, o := range opts {
if err := o.before(&c); err != nil {
return toRPCErr(err)
}
}
defer func() {
for _, o := range opts {
o.after(&c)
}
}()
callHdr := &transport.CallHdr{
Host: cc.authority,
Method: method,
}
topts := &transport.Options{
Last: true,
Delay: false,
}
var (
ts int // track the transport sequence number
lastErr error // record the error that happened
)
for {
var (
err error
t transport.ClientTransport
stream *transport.Stream
)
// TODO(zhaoq): Need a formal spec of retry strategy for non-failfast rpcs.
if lastErr != nil && c.failFast {
return toRPCErr(lastErr)
}
t, ts, err = cc.wait(ctx, ts)
if err != nil {
if lastErr != nil {
// This was a retry; return the error from the last attempt.
return toRPCErr(lastErr)
}
return toRPCErr(err)
}
stream, err = sendRequest(ctx, cc.dopts.codec, callHdr, t, args, topts)
if err != nil {
if _, ok := err.(transport.ConnectionError); ok {
lastErr = err
continue
}
if lastErr != nil {
return toRPCErr(lastErr)
}
return toRPCErr(err)
}
// Receive the response
lastErr = recvResponse(cc.dopts.codec, t, &c, stream, reply)
if _, ok := lastErr.(transport.ConnectionError); ok {
continue
}
t.CloseStream(stream, lastErr)
if lastErr != nil {
return toRPCErr(lastErr)
}
return Errorf(stream.StatusCode(), stream.StatusDesc())
}
}
func invoke(ctx context.Context, method string, args, reply interface{}, cc *ClientConn, opts ...CallOption) (e error) {
c := defaultCallInfo
if mc, ok := cc.getMethodConfig(method); ok {
c.failFast = !mc.WaitForReady
if mc.Timeout > 0 {
var cancel context.CancelFunc
ctx, cancel = context.WithTimeout(ctx, mc.Timeout)
defer cancel()
}
}
for _, o := range opts {
if err := o.before(&c); err != nil {
return toRPCErr(err)
}
}
defer func() {
for _, o := range opts {
o.after(&c)
}
}()
if EnableTracing {
c.traceInfo.tr = trace.New("grpc.Sent."+methodFamily(method), method)
defer c.traceInfo.tr.Finish()
c.traceInfo.firstLine.client = true
if deadline, ok := ctx.Deadline(); ok {
c.traceInfo.firstLine.deadline = deadline.Sub(time.Now())
}
c.traceInfo.tr.LazyLog(&c.traceInfo.firstLine, false)
// TODO(dsymonds): Arrange for c.traceInfo.firstLine.remoteAddr to be set.
defer func() {
if e != nil {
c.traceInfo.tr.LazyLog(&fmtStringer{"%v", []interface{}{e}}, true)
c.traceInfo.tr.SetError()
}
}()
}
sh := cc.dopts.copts.StatsHandler
if sh != nil {
ctx = sh.TagRPC(ctx, &stats.RPCTagInfo{FullMethodName: method})
begin := &stats.Begin{
Client: true,
BeginTime: time.Now(),
FailFast: c.failFast,
}
sh.HandleRPC(ctx, begin)
}
defer func() {
if sh != nil {
end := &stats.End{
Client: true,
EndTime: time.Now(),
Error: e,
}
sh.HandleRPC(ctx, end)
}
}()
topts := &transport.Options{
Last: true,
Delay: false,
}
for {
var (
err error
t transport.ClientTransport
stream *transport.Stream
// Record the put handler from Balancer.Get(...). It is called once the
// RPC has completed or failed.
put func()
)
// TODO(zhaoq): Need a formal spec of fail-fast.
callHdr := &transport.CallHdr{
Host: cc.authority,
Method: method,
}
if cc.dopts.cp != nil {
callHdr.SendCompress = cc.dopts.cp.Type()
}
gopts := BalancerGetOptions{
BlockingWait: !c.failFast,
}
t, put, err = cc.getTransport(ctx, gopts)
if err != nil {
// TODO(zhaoq): Probably revisit the error handling.
if _, ok := err.(*rpcError); ok {
return err
}
if err == errConnClosing || err == errConnUnavailable {
if c.failFast {
return Errorf(codes.Unavailable, "%v", err)
}
continue
}
// All the other errors are treated as Internal errors.
return Errorf(codes.Internal, "%v", err)
}
if c.traceInfo.tr != nil {
c.traceInfo.tr.LazyLog(&payload{sent: true, msg: args}, true)
}
stream, err = sendRequest(ctx, cc.dopts, cc.dopts.cp, callHdr, t, args, topts)
if err != nil {
if put != nil {
put()
put = nil
}
// Retry a non-failfast RPC when
// i) there is a connection error; or
// ii) the server started to drain before this RPC was initiated.
if _, ok := err.(transport.ConnectionError); ok || err == transport.ErrStreamDrain {
if c.failFast {
return toRPCErr(err)
}
continue
}
return toRPCErr(err)
}
err = recvResponse(ctx, cc.dopts, t, &c, stream, reply)
if err != nil {
if put != nil {
put()
put = nil
}
if _, ok := err.(transport.ConnectionError); ok || err == transport.ErrStreamDrain {
if c.failFast {
return toRPCErr(err)
}
continue
}
return toRPCErr(err)
}
if c.traceInfo.tr != nil {
c.traceInfo.tr.LazyLog(&payload{sent: false, msg: reply}, true)
}
t.CloseStream(stream, nil)
if put != nil {
put()
put = nil
}
return Errorf(stream.StatusCode(), "%s", stream.StatusDesc())
}
}
// Invoke is called by the generated code. It sends the RPC request on the
// wire and returns after response is received.
func Invoke(ctx context.Context, method string, args, reply interface{}, cc *ClientConn, opts ...CallOption) (err error) {
var c callInfo
// before/after
// 1. 首先调用所有的opts的before(作用的对象是callInfo)
for _, o := range opts {
if err := o.before(&c); err != nil {
return toRPCErr(err)
}
}
defer func() {
for _, o := range opts {
o.after(&c)
}
}()
// 暂不考虑: Tracing
if EnableTracing {
c.traceInfo.tr = trace.New("grpc.Sent."+methodFamily(method), method)
defer c.traceInfo.tr.Finish()
c.traceInfo.firstLine.client = true
if deadline, ok := ctx.Deadline(); ok {
c.traceInfo.firstLine.deadline = deadline.Sub(time.Now())
}
c.traceInfo.tr.LazyLog(&c.traceInfo.firstLine, false)
// TODO(dsymonds): Arrange for c.traceInfo.firstLine.remoteAddr to be set.
defer func() {
if err != nil {
c.traceInfo.tr.LazyLog(&fmtStringer{"%v", []interface{}{err}}, true)
c.traceInfo.tr.SetError()
}
}()
}
// 函数调用: 最后一个消息，马上执行
topts := &transport.Options{
Last: true,
Delay: false,
}
var (
lastErr error // record the error that happened
)
// 在某个Invoke过程中不停地for，到底是要做什么呢?
for {
var (
err error
t transport.ClientTransport
stream *transport.Stream
)
// TODO(zhaoq): Need a formal spec of retry strategy for non-failfast rpcs.
// 1. failFast的处理
if lastErr != nil && c.failFast {
return toRPCErr(lastErr)
}
// 2. callHdr如何处理呢?
callHdr := &transport.CallHdr{
Host: cc.authority,
Method: method,
}
// 3. 设置发送方的压缩算法(在接收方需要检测这个)
if cc.dopts.cp != nil {
callHdr.SendCompress = cc.dopts.cp.Type()
}
// 4. 挑选一个Transport
// 这个是如何实现的呢?
t, err = cc.dopts.picker.Pick(ctx)
// 4.1 如果是Pick出现问题，则没有必要尝试；可能是底层的网路出现问题
if err != nil {
// 如果retry失败，则直接报失败
if lastErr != nil {
// This was a retry; return the error from the last attempt.
return toRPCErr(lastErr)
}
return toRPCErr(err)
}
// 暂不考虑: tr
if c.traceInfo.tr != nil {
c.traceInfo.tr.LazyLog(&payload{sent: true, msg: args}, true)
}
// 5. 如何发送请求呢?
// 核心参数: args
stream, err = sendRequest(ctx, cc.dopts.codec, cc.dopts.cp, callHdr, t, args, topts)
// 如何处理Err呢?
if err != nil {
// 5.1 如果是连接出现错误，则继续尝试
if _, ok := err.(transport.ConnectionError); ok {
lastErr = err
continue
}
// 5.2 其他错误，则直接终止调用
if lastErr != nil {
return toRPCErr(lastErr)
}
return toRPCErr(err)
}
// 6. Receive the response
lastErr = recvResponse(cc.dopts, t, &c, stream, reply)
// 6.1 如果是连接错误，则可以继续尝试
if _, ok := lastErr.(transport.ConnectionError); ok {
continue
}
if c.traceInfo.tr != nil {
c.traceInfo.tr.LazyLog(&payload{sent: false, msg: reply}, true)
}
// 7. 关闭stream
t.CloseStream(stream, lastErr)
if lastErr != nil {
return toRPCErr(lastErr)
}
// 8. 汇报错误状态
return Errorf(stream.StatusCode(), "%s", stream.StatusDesc())
}
}
