Exemplo n.º 1
0
// setNodeDiskPressureCondition for the node.
// TODO: this needs to move somewhere centralized...
func (kl *Kubelet) setNodeDiskPressureCondition(node *v1.Node) {
	currentTime := metav1.NewTime(kl.clock.Now())
	var condition *v1.NodeCondition

	// Check if NodeDiskPressure condition already exists and if it does, just pick it up for update.
	for i := range node.Status.Conditions {
		if node.Status.Conditions[i].Type == v1.NodeDiskPressure {
			condition = &node.Status.Conditions[i]
		}
	}

	newCondition := false
	// If the NodeDiskPressure condition doesn't exist, create one
	if condition == nil {
		condition = &v1.NodeCondition{
			Type:   v1.NodeDiskPressure,
			Status: v1.ConditionUnknown,
		}
		// cannot be appended to node.Status.Conditions here because it gets
		// copied to the slice. So if we append to the slice here none of the
		// updates we make below are reflected in the slice.
		newCondition = true
	}

	// Update the heartbeat time
	condition.LastHeartbeatTime = currentTime

	// Note: The conditions below take care of the case when a new NodeDiskPressure condition is
	// created and as well as the case when the condition already exists. When a new condition
	// is created its status is set to v1.ConditionUnknown which matches either
	// condition.Status != v1.ConditionTrue or
	// condition.Status != v1.ConditionFalse in the conditions below depending on whether
	// the kubelet is under disk pressure or not.
	if kl.evictionManager.IsUnderDiskPressure() {
		if condition.Status != v1.ConditionTrue {
			condition.Status = v1.ConditionTrue
			condition.Reason = "KubeletHasDiskPressure"
			condition.Message = "kubelet has disk pressure"
			condition.LastTransitionTime = currentTime
			kl.recordNodeStatusEvent(v1.EventTypeNormal, "NodeHasDiskPressure")
		}
	} else {
		if condition.Status != v1.ConditionFalse {
			condition.Status = v1.ConditionFalse
			condition.Reason = "KubeletHasNoDiskPressure"
			condition.Message = "kubelet has no disk pressure"
			condition.LastTransitionTime = currentTime
			kl.recordNodeStatusEvent(v1.EventTypeNormal, "NodeHasNoDiskPressure")
		}
	}

	if newCondition {
		node.Status.Conditions = append(node.Status.Conditions, *condition)
	}
}
Exemplo n.º 2
0
// SetNodeCondition updates specific node condition with patch operation.
func SetNodeCondition(c clientset.Interface, node types.NodeName, condition v1.NodeCondition) error {
	generatePatch := func(condition v1.NodeCondition) ([]byte, error) {
		raw, err := json.Marshal(&[]v1.NodeCondition{condition})
		if err != nil {
			return nil, err
		}
		return []byte(fmt.Sprintf(`{"status":{"conditions":%s}}`, raw)), nil
	}
	condition.LastHeartbeatTime = metav1.NewTime(time.Now())
	patch, err := generatePatch(condition)
	if err != nil {
		return nil
	}
	_, err = c.Core().Nodes().PatchStatus(string(node), patch)
	return err
}
Exemplo n.º 3
0
// Set OODCondition for the node.
func (kl *Kubelet) setNodeOODCondition(node *v1.Node) {
	currentTime := metav1.NewTime(kl.clock.Now())
	var nodeOODCondition *v1.NodeCondition

	// Check if NodeOutOfDisk condition already exists and if it does, just pick it up for update.
	for i := range node.Status.Conditions {
		if node.Status.Conditions[i].Type == v1.NodeOutOfDisk {
			nodeOODCondition = &node.Status.Conditions[i]
		}
	}

	newOODCondition := false
	// If the NodeOutOfDisk condition doesn't exist, create one.
	if nodeOODCondition == nil {
		nodeOODCondition = &v1.NodeCondition{
			Type:   v1.NodeOutOfDisk,
			Status: v1.ConditionUnknown,
		}
		// nodeOODCondition cannot be appended to node.Status.Conditions here because it gets
		// copied to the slice. So if we append nodeOODCondition to the slice here none of the
		// updates we make to nodeOODCondition below are reflected in the slice.
		newOODCondition = true
	}

	// Update the heartbeat time irrespective of all the conditions.
	nodeOODCondition.LastHeartbeatTime = currentTime

	// Note: The conditions below take care of the case when a new NodeOutOfDisk condition is
	// created and as well as the case when the condition already exists. When a new condition
	// is created its status is set to v1.ConditionUnknown which matches either
	// nodeOODCondition.Status != v1.ConditionTrue or
	// nodeOODCondition.Status != v1.ConditionFalse in the conditions below depending on whether
	// the kubelet is out of disk or not.
	if kl.isOutOfDisk() {
		if nodeOODCondition.Status != v1.ConditionTrue {
			nodeOODCondition.Status = v1.ConditionTrue
			nodeOODCondition.Reason = "KubeletOutOfDisk"
			nodeOODCondition.Message = "out of disk space"
			nodeOODCondition.LastTransitionTime = currentTime
			kl.recordNodeStatusEvent(v1.EventTypeNormal, "NodeOutOfDisk")
		}
	} else {
		if nodeOODCondition.Status != v1.ConditionFalse {
			// Update the out of disk condition when the condition status is unknown even if we
			// are within the outOfDiskTransitionFrequency duration. We do this to set the
			// condition status correctly at kubelet startup.
			if nodeOODCondition.Status == v1.ConditionUnknown || kl.clock.Since(nodeOODCondition.LastTransitionTime.Time) >= kl.outOfDiskTransitionFrequency {
				nodeOODCondition.Status = v1.ConditionFalse
				nodeOODCondition.Reason = "KubeletHasSufficientDisk"
				nodeOODCondition.Message = "kubelet has sufficient disk space available"
				nodeOODCondition.LastTransitionTime = currentTime
				kl.recordNodeStatusEvent(v1.EventTypeNormal, "NodeHasSufficientDisk")
			} else {
				glog.Infof("Node condition status for OutOfDisk is false, but last transition time is less than %s", kl.outOfDiskTransitionFrequency)
			}
		}
	}

	if newOODCondition {
		node.Status.Conditions = append(node.Status.Conditions, *nodeOODCondition)
	}
}
Exemplo n.º 4
0
// Set Ready condition for the node.
func (kl *Kubelet) setNodeReadyCondition(node *v1.Node) {
	// NOTE(aaronlevy): NodeReady condition needs to be the last in the list of node conditions.
	// This is due to an issue with version skewed kubelet and master components.
	// ref: https://github.com/kubernetes/kubernetes/issues/16961
	currentTime := metav1.NewTime(kl.clock.Now())
	var newNodeReadyCondition v1.NodeCondition
	rs := append(kl.runtimeState.runtimeErrors(), kl.runtimeState.networkErrors()...)
	if len(rs) == 0 {
		newNodeReadyCondition = v1.NodeCondition{
			Type:              v1.NodeReady,
			Status:            v1.ConditionTrue,
			Reason:            "KubeletReady",
			Message:           "kubelet is posting ready status",
			LastHeartbeatTime: currentTime,
		}
	} else {
		newNodeReadyCondition = v1.NodeCondition{
			Type:              v1.NodeReady,
			Status:            v1.ConditionFalse,
			Reason:            "KubeletNotReady",
			Message:           strings.Join(rs, ","),
			LastHeartbeatTime: currentTime,
		}
	}

	// Append AppArmor status if it's enabled.
	// TODO(timstclair): This is a temporary message until node feature reporting is added.
	if newNodeReadyCondition.Status == v1.ConditionTrue &&
		kl.appArmorValidator != nil && kl.appArmorValidator.ValidateHost() == nil {
		newNodeReadyCondition.Message = fmt.Sprintf("%s. AppArmor enabled", newNodeReadyCondition.Message)
	}

	// Record any soft requirements that were not met in the container manager.
	status := kl.containerManager.Status()
	if status.SoftRequirements != nil {
		newNodeReadyCondition.Message = fmt.Sprintf("%s. WARNING: %s", newNodeReadyCondition.Message, status.SoftRequirements.Error())
	}

	readyConditionUpdated := false
	needToRecordEvent := false
	for i := range node.Status.Conditions {
		if node.Status.Conditions[i].Type == v1.NodeReady {
			if node.Status.Conditions[i].Status == newNodeReadyCondition.Status {
				newNodeReadyCondition.LastTransitionTime = node.Status.Conditions[i].LastTransitionTime
			} else {
				newNodeReadyCondition.LastTransitionTime = currentTime
				needToRecordEvent = true
			}
			node.Status.Conditions[i] = newNodeReadyCondition
			readyConditionUpdated = true
			break
		}
	}
	if !readyConditionUpdated {
		newNodeReadyCondition.LastTransitionTime = currentTime
		node.Status.Conditions = append(node.Status.Conditions, newNodeReadyCondition)
	}
	if needToRecordEvent {
		if newNodeReadyCondition.Status == v1.ConditionTrue {
			kl.recordNodeStatusEvent(v1.EventTypeNormal, events.NodeReady)
		} else {
			kl.recordNodeStatusEvent(v1.EventTypeNormal, events.NodeNotReady)
			glog.Infof("Node became not ready: %+v", newNodeReadyCondition)
		}
	}
}