Exemplo n.º 1
0
// checkDegree broadcasts connection solicitations with exponential backoff until
// the degree is met, then returns. checkDegree locks and will cause the caller to block
// until the degree is met. It should only be run as a goroutine.
func (n *Node) checkDegree() {
	// check degree only if we're not already running
	n.degreeLock.Lock()
	defer n.degreeLock.Unlock()

	var backoff uint = 1
	s := rand.NewSource(time.Now().UnixNano())
	r := rand.New(s)
	for n.numClients() < n.degree {
		log.Debugln("soliciting connections")
		b := net.IPv4(255, 255, 255, 255)
		addr := net.UDPAddr{
			IP:   b,
			Port: n.port,
		}
		socket, err := net.DialUDP("udp4", nil, &addr)
		if err != nil {
			log.Error("checkDegree: %v", err)
			break
		}
		message := fmt.Sprintf("meshage:%s:%s", n.namespace, n.name)
		_, err = socket.Write([]byte(message))
		socket.Close()
		if err != nil {
			log.Error("checkDegree: %v", err)
			break
		}
		wait := r.Intn(1 << backoff)
		time.Sleep(time.Duration(wait) * time.Second)
		if backoff < 7 { // maximum wait won't exceed 128 seconds
			backoff++
		}
	}
}
Exemplo n.º 2
0
Arquivo: vnc.go Projeto: npe9/minimega
func vncClear() error {
	for k, v := range vncKBRecording {
		log.Debug("stopping kb recording for %v", k)
		if err := v.Stop(); err != nil {
			log.Error("%v", err)
		}

		delete(vncKBRecording, k)
	}

	for k, v := range vncFBRecording {
		log.Debug("stopping fb recording for %v", k)
		if err := v.Stop(); err != nil {
			log.Error("%v", err)
		}

		delete(vncFBRecording, k)
	}

	for k, v := range vncKBPlaying {
		log.Debug("stopping kb playing for %v", k)
		if err := v.Stop(); err != nil {
			log.Error("%v", err)
		}

		delete(vncKBPlaying, k)
	}

	return nil
}
Exemplo n.º 3
0
func meshageHandler() {
	for {
		m := <-meshageCommandChan
		go func() {
			mCmd := m.Body.(meshageCommand)

			cmd, err := minicli.Compile(mCmd.Original)
			if err != nil {
				log.Error("invalid command from mesh: `%s`", mCmd.Original)
				return
			}

			resps := []minicli.Responses{}
			for resp := range runCommand(cmd) {
				resps = append(resps, resp)
			}

			if len(resps) > 1 || len(resps[0]) > 1 {
				// This should never happen because the only commands that
				// return multiple responses are `read` and `mesh send` which
				// aren't supposed to be sent across meshage.
				log.Error("unsure how to process multiple responses!!")
			}

			resp := meshageResponse{Response: *resps[0][0], TID: mCmd.TID}
			recipient := []string{m.Source}

			_, err = meshageNode.Set(recipient, resp)
			if err != nil {
				log.Errorln(err)
			}
		}()
	}
}
Exemplo n.º 4
0
Arquivo: web.go Projeto: npe9/minimega
func webStart(port int, root string) {
	// Initialize templates
	templates := filepath.Join(root, "templates")
	log.Info("compiling templates from %s", templates)

	web.Templates = template.New("minimega-templates")
	filepath.Walk(templates, func(path string, info os.FileInfo, err error) error {
		if err != nil {
			log.Error("failed to load template from %s", path)
			return nil
		}

		if !info.IsDir() && strings.HasSuffix(path, ".html") {
			web.Templates.ParseFiles(path)
		}

		return nil
	})

	mux := http.NewServeMux()
	for _, v := range []string{"novnc", "libs", "include"} {
		path := fmt.Sprintf("/%s/", v)
		dir := http.Dir(filepath.Join(root, v))
		mux.Handle(path, http.StripPrefix(path, http.FileServer(dir)))
	}

	mux.HandleFunc("/", webVMs)
	mux.HandleFunc("/map", webMapVMs)
	mux.HandleFunc("/screenshot/", webScreenshot)
	mux.HandleFunc("/hosts", webHosts)
	mux.HandleFunc("/tags", webVMTags)
	mux.HandleFunc("/tiles", webTileVMs)
	mux.HandleFunc("/graph", webGraph)
	mux.HandleFunc("/json", webJSON)
	mux.HandleFunc("/vnc/", webVNC)
	mux.HandleFunc("/ws/", vncWsHandler)

	if web.Server == nil {
		web.Server = &http.Server{
			Addr:    fmt.Sprintf(":%d", port),
			Handler: mux,
		}

		err := web.Server.ListenAndServe()
		if err != nil {
			log.Error("web: %v", err)
			web.Server = nil
		} else {
			web.Port = port
			web.Running = true
		}
	} else {
		log.Info("web: changing web root to: %s", root)
		if port != web.Port && port != defaultWebPort {
			log.Error("web: changing web's port is not supported")
		}
		// just update the mux
		web.Server.Handler = mux
	}
}
Exemplo n.º 5
0
// Flush cleans up all resources allocated to the VM which includes all the
// network taps.
func (vm *KvmVM) Flush() error {
	vm.lock.Lock()
	defer vm.lock.Unlock()

	for _, net := range vm.Networks {
		// Handle already disconnected taps differently since they aren't
		// assigned to any bridges.
		if net.VLAN == DisconnectedVLAN {
			if err := bridge.DestroyTap(net.Tap); err != nil {
				log.Error("leaked tap %v: %v", net.Tap, err)
			}

			continue
		}

		br, err := getBridge(net.Bridge)
		if err != nil {
			return err
		}

		if err := br.DestroyTap(net.Tap); err != nil {
			log.Error("leaked tap %v: %v", net.Tap, err)
		}
	}

	return vm.BaseVM.Flush()
}
Exemplo n.º 6
0
func (vms VMs) kill(target string) []error {
	killedVms := map[int]bool{}

	errs := expandVmTargets(target, false, func(vm VM, _ bool) (bool, error) {
		if vm.GetState()&VM_KILLABLE == 0 {
			return false, nil
		}

		if err := vm.Kill(); err != nil {
			log.Error("unleash the zombie VM: %v", err)
		} else {
			killedVms[vm.GetID()] = true
		}
		return true, nil
	})

outer:
	for len(killedVms) > 0 {
		select {
		case id := <-killAck:
			log.Info("VM %v killed", id)
			delete(killedVms, id)
		case <-time.After(COMMAND_TIMEOUT * time.Second):
			log.Error("vm kill timeout")
			break outer
		}
	}

	for id := range killedVms {
		log.Info("VM %d failed to acknowledge kill", id)
	}

	return errs
}
Exemplo n.º 7
0
func (vm *ContainerVM) console(stdin, stdout, stderr *os.File) {
	socketPath := filepath.Join(vm.instancePath, "console")
	l, err := net.Listen("unix", socketPath)
	if err != nil {
		log.Error("could not start unix domain socket console on vm %v: %v", vm.ID, err)
		return
	}
	vm.listener = l

	for {
		conn, err := l.Accept()
		if err != nil {
			if strings.Contains(err.Error(), "use of closed network connection") {
				return
			}
			log.Error("console socket on vm %v: %v", vm.ID, err)
			continue
		}
		log.Debug("new connection!")

		go io.Copy(conn, stdout)
		go io.Copy(conn, stderr)
		io.Copy(stdin, conn)
		log.Debug("disconnected!")
	}
}
Exemplo n.º 8
0
func vncClear() {
	for k, v := range vncKBRecording {
		if inNamespace(v.VM) {
			log.Debug("stopping kb recording for %v", k)
			if err := v.Stop(); err != nil {
				log.Error("%v", err)
			}

			delete(vncKBRecording, k)
		}
	}

	for k, v := range vncFBRecording {
		if inNamespace(v.VM) {
			log.Debug("stopping fb recording for %v", k)
			if err := v.Stop(); err != nil {
				log.Error("%v", err)
			}

			delete(vncFBRecording, k)
		}
	}

	for k, v := range vncPlaying {
		if inNamespace(v.VM) {
			log.Debug("stopping kb playing for %v", k)
			if err := v.Stop(); err != nil {
				log.Error("%v", err)
			}

			delete(vncPlaying, k)
		}
	}
}
Exemplo n.º 9
0
// recvFiles retrieves a list of files from the ron server by requesting each
// one individually.
func recvFiles(files []*ron.File) {
	start := time.Now()
	var size int64

	for _, v := range files {
		log.Info("requesting file %v", v)

		dst := filepath.Join(*f_path, "files", v.Name)

		if _, err := os.Stat(dst); err == nil {
			// file exists (TODO: overwrite?)
			log.Info("skipping %v -- already exists")
			continue
		}

		m := &ron.Message{
			Type:     ron.MESSAGE_FILE,
			UUID:     Client.UUID,
			Filename: v.Name,
		}

		if err := sendMessage(m); err != nil {
			log.Error("send failed: %v", err)
			return
		}

		resp := <-Client.fileChan
		if resp.Filename != v.Name {
			log.Error("filename mismatch: %v != %v", resp.Filename, v.Name)
			continue
		}

		if resp.Error != "" {
			log.Error("%v", resp.Error)
			continue
		}

		dir := filepath.Dir(dst)

		if err := os.MkdirAll(dir, os.FileMode(0770)); err != nil {
			log.Errorln(err)
			continue
		}

		if err := ioutil.WriteFile(dst, resp.File, v.Perm); err != nil {
			log.Errorln(err)
			continue
		}

		size += int64(len(resp.File))
	}

	d := time.Since(start)
	rate := (float64(size) / 1024 / d.Seconds())

	log.Debug("received %v bytes in %v (%v KBps)", size, d, rate)

	return
}
Exemplo n.º 10
0
// newConnection processes a new incoming connection from another node, processes the connection
// handshake, adds the connection to the client list, and starts the client message handler.
func (n *Node) newConnection(conn net.Conn) {
	log.Debug("newConnection: %v", conn.RemoteAddr().String())

	// are we soliciting connections?
	var solicited bool
	if uint(len(n.clients)) < n.degree {
		solicited = true
	} else {
		solicited = false
	}
	log.Debug("solicited: %v", solicited)

	c := &client{
		conn: conn,
		enc:  gob.NewEncoder(conn),
		dec:  gob.NewDecoder(conn),
		ack:  make(chan uint64, RECEIVE_BUFFER),
	}

	// the handshake involves the following:
	// 1.  We send our name and our solicitation status
	// 2a. If the connection is solicited but we're all full, the remote node simply hangs up
	// 2b. If the connection is unsolicited or solicited and we are still soliciting connections, the remote node responds with its name
	// 3.  The connection is valid, add it to our client list and broadcast a MSA announcing the new connection.
	// 4.  The remote node does the same as 3.
	err := c.enc.Encode(n.name)
	if err != nil {
		log.Error("newConnection encode name: %v: %v", n.name, err)
		c.conn.Close()
		return
	}

	err = c.enc.Encode(solicited)
	if err != nil {
		log.Error("newConnection encode solicited: %v: %v", n.name, err)
		c.conn.Close()
		return
	}

	var resp string
	err = c.dec.Decode(&resp)
	if err != nil {
		if err != io.EOF {
			log.Error("newConnection decode name: %v: %v", n.name, err)
		}
		c.conn.Close()
		return
	}

	c.name = resp
	log.Debug("handshake from: %v", c.name)

	n.clientLock.Lock()
	n.clients[resp] = c
	n.clientLock.Unlock()

	go n.clientHandler(resp)
}
Exemplo n.º 11
0
func (b *Bridge) snooper() {
	var (
		dot1q layers.Dot1Q
		eth   layers.Ethernet
		ip4   layers.IPv4
		ip6   layers.IPv6
		arp   layers.ARP
	)

	parser := gopacket.NewDecodingLayerParser(layers.LayerTypeEthernet,
		&dot1q,
		&eth,
		&ip4,
		&ip6,
		&arp,
	)

	decodedLayers := []gopacket.LayerType{}

	for {
		data, _, err := b.handle.ReadPacketData()
		if err != nil {
			if err != io.EOF {
				log.Error("error reading packet data: ", err)
			}
			break
		}

		if err := parser.DecodeLayers(data, &decodedLayers); err != nil {
			if err2, ok := err.(gopacket.UnsupportedLayerType); ok {
				switch gopacket.LayerType(err2) {
				case layers.LayerTypeICMPv6, gopacket.LayerTypePayload:
					// ignore
					err = nil
				default:
					continue
				}
			}

			if err != nil {
				log.Error("error parsing packet: %v", err)
				continue
			}
		}

		for _, layerType := range decodedLayers {
			switch layerType {
			case layers.LayerTypeICMPv6:
				b.updateIP(eth.SrcMAC.String(), ip6.SrcIP)
			case layers.LayerTypeARP:
				b.updateIP(eth.SrcMAC.String(), net.IP(arp.SourceProtAddress))
			}
		}
	}

	log.Info("%v snoop out", b.Name)
}
Exemplo n.º 12
0
func nukeTap(b, tap string) {
	if err := ovsDelPort(b, tap); err != nil && err != ErrNoSuchPort {
		log.Error("%v, %v -- %v", b, tap, err)
	}

	if err := delTap(tap); err != nil {
		log.Error("%v -- %v", tap, err)
	}
}
Exemplo n.º 13
0
// route an outgoing message to one or all clients, according to UUID
func (s *Server) route(m *Message) {
	handleUUID := func(uuid string) {
		c, ok := s.clients[uuid]
		if !ok {
			log.Error("no such client %v", uuid)
			return
		}

		vm, ok := s.vms[uuid]
		if !ok {
			// The client is connected but not registered:
			//  * client connected before it was registered
			//  * client was unregistered before it disconnected
			// Either way, we have to skip it since we don't know what
			// namespace it belongs to.
			log.Error("unregistered client %v", uuid)
			return
		}

		// Create a copy of the Message
		m2 := *m
		m2.Tags = vm.GetTags()
		m2.Namespace = vm.GetNamespace()

		if err := c.sendMessage(&m2); err != nil {
			if strings.Contains(err.Error(), "broken pipe") {
				log.Debug("client disconnected: %v", uuid)
			} else {
				log.Info("unable to send message to %v: %v", uuid, err)
			}
		}
	}

	s.clientLock.Lock()
	defer s.clientLock.Unlock()

	if m.UUID != "" {
		handleUUID(m.UUID)
		return
	}

	var wg sync.WaitGroup

	// send commands to all clients, in parallel
	for uuid := range s.clients {
		wg.Add(1)

		go func(uuid string) {
			defer wg.Done()

			handleUUID(uuid)
		}(uuid)
	}

	wg.Wait()
}
Exemplo n.º 14
0
// clientHandler is called as a goroutine after a successful handshake. It
// begins by issuing an MSA. When the receiver exits, another MSA is issued
// without the client.
func (n *Node) clientHandler(host string) {
	log.Debug("clientHandler: %v", host)

	c, err := n.getClient(host)
	if err != nil {
		log.Error("client %v vanished -- %v", host, err)
		return
	}

	n.MSA()

	for {
		var m Message
		c.conn.SetReadDeadline(time.Now().Add(deadlineMultiplier * n.msaTimeout))
		err := c.dec.Decode(&m)
		if err != nil {
			if err != io.EOF && !strings.Contains(err.Error(), "connection reset by peer") {
				log.Error("client %v decode: %v", host, err)
			}
			break
		}
		if log.WillLog(log.DEBUG) {
			log.Debug("decoded message: %v: %v", c.name, &m)
		}
		if m.Command == ACK {
			c.ack <- m.ID
		} else {
			// send an ack
			a := Message{
				Command: ACK,
				ID:      m.ID,
			}
			c.conn.SetWriteDeadline(time.Now().Add(deadlineMultiplier * n.msaTimeout))
			err := c.enc.Encode(a)
			if err != nil {
				if err != io.EOF {
					log.Error("client %v encode ACK: %v", host, err)
				}
				break
			}
			n.messagePump <- &m
		}
	}
	log.Info("client %v disconnected", host)

	// client has disconnected
	c.conn.Close()
	n.clientLock.Lock()
	delete(n.clients, c.name)
	n.clientLock.Unlock()
	go n.checkDegree()

	n.MSA()
}
Exemplo n.º 15
0
func runTests() {
	mm, err := miniclient.Dial(*f_base)
	if err != nil {
		log.Fatal("%v", err)
	}

	if *f_preamble != "" {
		out, err := runCommands(mm, *f_preamble)
		if err != nil {
			log.Fatal("%v", err)
		}

		log.Info(out)
	}

	// TODO: Should we quit minimega and restart it between each test?
	//quit := mustCompile(t, "quit 2")

	files, err := ioutil.ReadDir(*f_testDir)
	if err != nil {
		log.Fatal("%v", err)
	}

	for _, info := range files {
		if strings.HasSuffix(info.Name(), ".want") || strings.HasSuffix(info.Name(), ".got") {
			continue
		}

		log.Info("Running commands from %s", info.Name())
		fpath := path.Join(*f_testDir, info.Name())

		got, err := runCommands(mm, fpath)
		if err != nil {
			log.Fatal("%v", err)
		}

		// Record the output for offline comparison
		if err := ioutil.WriteFile(fpath+".got", []byte(got), os.FileMode(0644)); err != nil {
			log.Error("unable to write `%s` -- %v", fpath+".got", err)
		}

		want, err := ioutil.ReadFile(fpath + ".want")
		if err != nil {
			log.Error("unable to read file `%s` -- %v", fpath+".want", err)
			continue
		}

		if got != string(want) {
			log.Error("got != want for %s", info.Name())
		}

		//mm.runCommand(quit)
	}
}
Exemplo n.º 16
0
Arquivo: web.go Projeto: npe9/minimega
func webVMs(w http.ResponseWriter, r *http.Request) {
	if r.URL.Path != "/" {
		http.NotFound(w, r)
		return
	}

	table := htmlTable{
		Header:  []string{"host", "screenshot"},
		Tabular: [][]interface{}{},
		ID:      "example",
		Class:   "hover",
	}
	table.Header = append(table.Header, vmMasks...)

	stateMask := VM_QUIT | VM_ERROR

	for host, vms := range globalVmInfo() {
	vmLoop:
		for _, vm := range vms {
			var buf bytes.Buffer
			if vm.GetState()&stateMask == 0 {
				params := vmScreenshotParams{
					Host: host,
					Name: vm.GetName(),
					Port: 5900 + vm.GetID(),
					ID:   vm.GetID(),
					Size: 140,
				}

				if err := web.Templates.ExecuteTemplate(&buf, "fragment/screenshot", &params); err != nil {
					log.Error("unable to execute template screenshot -- %v", err)
					continue
				}
			}

			res := []interface{}{host, template.HTML(buf.String())}

			for _, mask := range vmMasks {
				if v, err := vm.Info(mask); err != nil {
					log.Error("unable to get info from VM %s:%s -- %v", host, vm.GetName(), err)
					continue vmLoop
				} else {
					res = append(res, v)
				}
			}

			table.Tabular = append(table.Tabular, res)
		}
	}

	webRenderTemplate(w, "table.html", table)
}
Exemplo n.º 17
0
func hostid(s string) (string, int) {
	k := strings.Split(s, ":")
	if len(k) != 2 {
		log.Error("hostid cannot split host vmid pair: %v", k)
		return "", -1
	}
	val, err := strconv.Atoi(k[1])
	if err != nil {
		log.Error("parse hostid: %v", err)
		return "", -1
	}
	return k[0], val
}
Exemplo n.º 18
0
func webStart(port int, root string) {
	// Initialize templates
	var err error

	templates := filepath.Join(root, "templates", "*.html")
	log.Info("compiling templates from %s", templates)
	web.Templates, err = template.ParseGlob(templates)
	if err != nil {
		log.Error("failed to load templates from %s", templates)
		return
	}

	mux := http.NewServeMux()
	for _, v := range []string{"novnc", "d3", "include"} {
		path := fmt.Sprintf("/%s/", v)
		dir := http.Dir(filepath.Join(root, v))
		mux.Handle(path, http.StripPrefix(path, http.FileServer(dir)))
	}

	mux.HandleFunc("/", webVMs)
	mux.HandleFunc("/map", webMapVMs)
	mux.HandleFunc("/screenshot/", webScreenshot)
	mux.HandleFunc("/hosts", webHosts)
	mux.HandleFunc("/tags", webVMTags)
	mux.HandleFunc("/tiles", webTileVMs)
	mux.HandleFunc("/vnc/", webVNC)
	mux.HandleFunc("/ws/", vncWsHandler)

	if web.Server == nil {
		web.Server = &http.Server{
			Addr:    fmt.Sprintf(":%d", port),
			Handler: mux,
		}

		err := web.Server.ListenAndServe()
		if err != nil {
			log.Error("web: %v", err)
			web.Server = nil
		} else {
			web.Port = port
			web.Running = true
		}
	} else {
		log.Info("web: changing web root to: %s", root)
		if port != web.Port && port != defaultWebPort {
			log.Error("web: changing web's port is not supported")
		}
		// just update the mux
		web.Server.Handler = mux
	}
}
Exemplo n.º 19
0
// runCommand runs a command through a JSON pipe.
func runCommand(cmd Command) chan *localResponse {
	conn, err := net.Dial("unix", path.Join(*f_minimega, "minimega"))
	if err != nil {
		log.Errorln(err)
		return nil
	}

	enc := json.NewEncoder(conn)
	dec := json.NewDecoder(conn)

	log.Debug("encoding command: %v", cmd)

	err = enc.Encode(cmd)
	if err != nil {
		log.Error("local command json encode: %v", err)
		return nil
	}

	log.Debugln("encoded command:", cmd)

	respChan := make(chan *localResponse)

	go func() {
		defer close(respChan)

		for {
			var r localResponse
			err = dec.Decode(&r)
			if err != nil {
				if err == io.EOF {
					log.Infoln("server disconnected")
					return
				}

				log.Error("local command json decode: %v", err)
				return
			}

			respChan <- &r
			if !r.More {
				log.Debugln("got last message")
				break
			} else {
				log.Debugln("expecting more data")
			}
		}
	}()

	return respChan
}
Exemplo n.º 20
0
func captureUpdateNFTimeouts() {
	for _, b := range bridges.Names() {
		br, err := getBridge(b)
		if err != nil {
			log.Error("could not get bridge: %v", err)
			continue
		}

		err = br.SetNetflowTimeout(captureNFTimeout)
		if err != nil && !strings.Contains(err.Error(), "has no netflow object") {
			log.Error("unable to update netflow timeout: %v", err)
		}
	}
}
Exemplo n.º 21
0
// incoming message mux. Routes messages to the correct handlers based on
// message type
func (s *Server) mux() {
	for {
		m := <-s.in
		switch m.Type {
		case MESSAGE_CLIENT:
			// handle a client response
			log.Debugln("ron MESSAGE_CLIENT")
			s.responses <- m.Client
		case MESSAGE_TUNNEL:
			// handle a tunnel message
			log.Debugln("ron MESSAGE_TUNNEL")
			s.routeTunnel(m)
		case MESSAGE_COMMAND:
			// route a command to one or all clients
			log.Debugln("ron MESSAGE_COMMAND")
			s.route(m)
		case MESSAGE_FILE:
			// send a file if it exists
			s.sendFile(m)
		default:
			log.Error("unknown message type: %v", m.Type)
			return
		}
	}
}
Exemplo n.º 22
0
// destroy all bridges
func bridgesDestroy() error {
	var e []string
	for k, v := range bridges {
		err := v.Destroy()
		if err != nil {
			e = append(e, err.Error())
		}
		bridgeLock.Lock()
		delete(bridges, k)
		bridgeLock.Unlock()
	}
	bridgeLock.Lock()
	updateBridgeInfo()
	bridgeLock.Unlock()
	bridgeFile := *f_base + "bridges"
	err := os.Remove(bridgeFile)
	if err != nil {
		log.Error("bridgesDestroy: could not remove bridge file: %v", err)
	}
	if len(e) == 0 {
		return nil
	} else {
		return errors.New(strings.Join(e, " : "))
	}
}
Exemplo n.º 23
0
Arquivo: vm.go Projeto: npe9/minimega
// Get the VM info from all hosts optionally applying column/row filters.
// Returns a map with keys for the hostnames and values as the tabular data
// from the host.
func globalVmInfo() map[string]VMs {
	cmdStr := "vm info"

	res := map[string]VMs{}

	cmd := minicli.MustCompile(cmdStr)
	cmd.Record = false

	for resps := range runCommandGlobally(cmd) {
		for _, resp := range resps {
			if resp.Error != "" {
				log.Errorln(resp.Error)
				continue
			}

			switch data := resp.Data.(type) {
			case VMs:
				res[resp.Host] = data
			default:
				log.Error("unknown data field in vm info")
			}
		}
	}

	return res
}
Exemplo n.º 24
0
// nukeTaps removes a list of tap devices
func nukeTaps(taps []string) {
	for _, t := range taps {
		if err := bridge.DestroyTap(t); err != nil {
			log.Error("%v -- %v", t, err)
		}
	}
}
Exemplo n.º 25
0
// create an overlay mount (linux 3.18 or greater) is snapshot mode is
// being used.
func (vm *ContainerVM) overlayMount() error {
	vm.effectivePath = filepath.Join(vm.instancePath, "fs")
	workPath := filepath.Join(vm.instancePath, "fs_work")

	err := os.MkdirAll(vm.effectivePath, 0755)
	if err != nil {
		return err
	}
	err = os.MkdirAll(workPath, 0755)
	if err != nil {
		return err
	}

	// create the overlay mountpoint
	args := []string{
		"mount",
		"-t",
		"overlay",
		fmt.Sprintf("megamount_%v", vm.ID),
		"-o",
		fmt.Sprintf("lowerdir=%v,upperdir=%v,workdir=%v", vm.FSPath, vm.effectivePath, workPath),
		vm.effectivePath,
	}
	log.Debug("mounting overlay: %v", args)
	out, err := processWrapper(args...)
	if err != nil {
		log.Error("overlay mount: %v %v", err, out)
		return err
	}
	return nil
}
Exemplo n.º 26
0
// Walks the f_base directory and kills procs read from any qemu or
// dnsmasq pid files
func nukeWalker(path string, info os.FileInfo, err error) error {
	if err != nil {
		return nil
	}

	log.Debug("walking file: %v", path)

	switch info.Name() {
	case "qemu.pid", "dnsmasq.pid":
		d, err := ioutil.ReadFile(path)
		t := strings.TrimSpace(string(d))
		log.Debug("found pid: %v", t)
		if err != nil {
			return err
		}

		args := []string{
			"kill",
			t,
		}
		log.Infoln("killing process:", t)

		out, err := processWrapper(args...)
		if err != nil {
			log.Error("%v: %v", err, out)
		}
	}
	return nil
}
Exemplo n.º 27
0
func nukeBridges() {
	for _, b := range nukeBridgeNames(false) {
		if err := bridge.DestroyBridge(b); err != nil {
			log.Error("%v -- %v", b, err)
		}
	}
}
Exemplo n.º 28
0
func (vms VMs) kill(target string) []error {
	killedVms := map[int]bool{}

	errs := expandVmTargets(target, false, func(vm VM, _ bool) (bool, error) {
		if vm.State()&(VM_QUIT|VM_ERROR) != 0 {
			return false, nil
		}

		vm.Kill()
		killedVms[vm.ID()] = true
		return true, nil
	})

outer:
	for len(killedVms) > 0 {
		select {
		case id := <-killAck:
			log.Info("VM %v killed", id)
			delete(killedVms, id)
		case <-time.After(COMMAND_TIMEOUT * time.Second):
			log.Error("vm kill timeout")
			break outer
		}
	}

	for id := range killedVms {
		log.Info("VM %d failed to acknowledge kill", id)
	}

	return errs
}
Exemplo n.º 29
0
// return a file to a client requesting it via the clients GetFile() call
func (s *Server) sendFile(m *Message) {
	log.Debug("ron sendFile: %v", m.Filename)

	filename := filepath.Join(s.path, m.Filename)
	info, err := os.Stat(filename)
	if err != nil {
		e := fmt.Errorf("file %v does not exist: %v", filename, err)
		m.Error = e.Error()
		log.Errorln(e)
	} else if info.IsDir() {
		e := fmt.Errorf("file %v is a directory", filename)
		m.Error = e.Error()
		log.Errorln(e)
	} else {
		// read the file
		m.File, err = ioutil.ReadFile(filename)
		if err != nil {
			e := fmt.Errorf("file %v: %v", filename, err)
			m.Error = e.Error()
			log.Errorln(e)
		}
	}

	// route this message ourselves instead of using the mux, because we
	// want the type to still be FILE
	s.clientLock.Lock()
	defer s.clientLock.Unlock()
	if c, ok := s.clients[m.UUID]; ok {
		c.out <- m
	} else {
		log.Error("no such client %v", m.UUID)
	}
}
Exemplo n.º 30
0
func (n *Node) flood(m *Message) {
	if log.WillLog(log.DEBUG) {
		log.Debug("flood: %v", m)
	}

	n.clientLock.Lock()
	defer n.clientLock.Unlock()

floodLoop:
	for k, _ := range n.clients {
		for _, j := range m.CurrentRoute {
			if k == j {
				continue floodLoop
			}
		}
		go func(j string, m *Message) {
			err := n.clientSend(j, m)
			if err != nil {
				// is j still a client?
				if n.hasClient(j) {
					log.Error("flood to client %v: %v", j, err)
				}
			}
		}(k, m)
	}
}