Exemplo n.º 1
0
func main() {
	lsplog.SetVerbose(3)
	lsplog.Vlogf(3, "[Request] Request has started")
	lsplog.Vlogf(3, "[Request] Args: %s", os.Args)
	port, _ := strconv.Atoi(os.Args[1])
	srv, _ = lsp12.NewLspServer(port, &lsp12.LspParams{5, 2000})
	clients = make(map[uint16]*client)
	workers = make(map[uint16]*worker)
	requestBuffer = abuf.NewBuf()
	workersAvailable = abuf.NewBuf()
	go networkHandler()

	//Scheduler
	for {
		workerConnId := workersAvailable.Remove().(uint16)
		req := requestBuffer.Remove().(*request)
		for clients[req.connId] == nil {
			req = requestBuffer.Remove().(*request)
		}
		freeWorker := workers[workerConnId]
		freeWorker.worksForClient = req.connId
		freeWorker.command = req.crackRequest
		srv.Write(workerConnId, []byte(req.crackRequest))
	}
}
Exemplo n.º 2
0
// Wait until server has signaled it is done
func (ts *SynchTestSystem) WaitServer() {
	lsplog.Vlogf(6, "Waiting for server\n")
	select {
	case d := <-ts.TChan:
		ts.Tester.Logf("Test reached time limit of %d waiting for server", d)
		ts.Tester.FailNow()
	case <-ts.S2MChan:
	}
	lsplog.Vlogf(6, "Got signal from server\n")
}
Exemplo n.º 3
0
func UDPResolve(hostport string) (*lspnet.UDPAddr, error) {
	lsplog.Vlogf(3, "Attempting to resolve address of %s", hostport)
	a, e := lspnet.ResolveUDPAddr(NET, hostport)
	if e != nil {
		lsplog.CheckFatal(e)
		return nil, e
	}
	lsplog.Vlogf(3, "Address %s resolved", hostport)
	return a, nil
}
Exemplo n.º 4
0
func (srv *LspServer) lspListen() error {
	lsplog.Vlogf(1, "[Server] Attempting to listen to port to %d", srv.udpAddr.Port)
	conn, e := lspnet.ListenUDP(NET, srv.udpAddr)
	if e != nil {
		lsplog.CheckFatal(e)
		return e
	}
	lsplog.Vlogf(1, "[Server] Listening to port %d", srv.udpAddr.Port)
	srv.udpConn = conn
	return nil
}
Exemplo n.º 5
0
func (cli *LspClient) udpConnect() error {
	lsplog.Vlogf(1, "[Client] Attempting to connect to %s:%d", cli.udpAddr.IP, cli.udpAddr.Port)
	b, e := lspnet.DialUDP(NET, nil, cli.udpAddr)
	if e != nil {
		lsplog.CheckFatal(e)
		return e
	}
	lsplog.Vlogf(6, "[Client] Connected to %s:%d", cli.udpAddr.IP, cli.udpAddr.Port)
	cli.udpConn = b
	return nil
}
Exemplo n.º 6
0
func (srv *LspServer) lspSend(m *LspMessage, c *clientRepresenter) {
	if m == nil || c == nil {
		lsplog.Vlogf(6, "[Server] Got a send request for m: %+v c:%+v Ignoring message", m, c)
		return
	}
	marshalled, err := json.Marshal(m)
	if err != nil {
		lsplog.CheckFatal(err)
	}
	lsplog.Vlogf(6, "[Server] Marshalled message: %s", marshalled)
	srv.udpConn.WriteToUDP(marshalled, c.addr)
}
Exemplo n.º 7
0
// Enable network & then Wait until it signals that it is done
func (ts *SynchTestSystem) SynchNetwork() {
	lsplog.Vlogf(6, "Enabling Network\n")
	ts.M2NChan <- true
	lsplog.Vlogf(6, "Waiting for network\n")
	select {
	case d := <-ts.TChan:
		ts.Tester.Logf("Test reached time limit of %d waiting for network", d)
		ts.Tester.FailNow()
	case <-ts.N2MChan:
	}
	lsplog.Vlogf(6, "Got signal from network\n")
}
Exemplo n.º 8
0
// Wait until clients have that they're done
func (ts *SynchTestSystem) WaitClients() {
	lsplog.Vlogf(6, "Waiting for clients\n")
	for i := 0; i < ts.Nclients; i++ {
		select {
		case d := <-ts.TChan:
			ts.Tester.Logf("Test reached time limit of %d waiting for client", d)
			ts.Tester.FailNow()
		case <-ts.C2MChan:
		}
	}

	lsplog.Vlogf(6, "Got signals from all clients\n")
}
Exemplo n.º 9
0
func (srv *LspServer) networkHandler() {
	lsplog.Vlogf(3, "[Server] Started the network handler")
	for { // Should loop only if the connection is still on.
		lsplog.Vlogf(6, "[Server] Going to read a packet")
		m, addr, err := srv.readPacket()
		if err != nil {
			lsplog.CheckReport(3, err)
			lsplog.Vlogf(6, "[Server] Ignoring this packet")
			continue
		}
		go srv.packetHandler(m, addr)
	}
}
Exemplo n.º 10
0
func (con *UDPConn) Write(b []byte) (int, error) {
	ncon := con.ncon
	if dropit(writeDropPercent) {
		lsplog.Vlogf(5, "UDP: DROPPING written packet of length %v\n", len(b))
		// Make it look like write was successful
		return len(b), nil
	} else {
		n, err := ncon.Write(b)
		lsplog.Vlogf(5, "UDP: Wrote packet of length %v\v", n)
		return n, err
	}
	return 0, nil
}
Exemplo n.º 11
0
func (srv *LspServer) packetHandler(m *LspMessage, addr *lspnet.UDPAddr) {
	lsplog.Vlogf(6, "[Server] Packet reading has no problems.")
	if IsConnection(m) {
		lsplog.Vlogf(1, "[Server] A new connection request recieved.")
		srv.handleConnectionRequest(addr)
	} else if IsDataPacket(m) {
		lsplog.Vlogf(4, "[Server] A data packet is recieved.")
		client := srv.getClient(addr)
		if client != nil {
			<-client.finished
			client.epochCount = 0
			if m.ConnId == client.connId {
				if m.SeqNum == client.clientSeqNum {
					srv.read.Insert(&readRequest{m.ConnId, m.Payload})
					ack := CreateDataAck(m.ConnId, m.SeqNum)
					srv.lspSend(ack, client)
					client.lastAck = ack
					client.clientSeqNum = (client.clientSeqNum + 1) % math.MaxInt8
				} else {
					lsplog.Vlogf(5, "[Server] Recieved data packet has an unexpected sequence (Getting: %d) (Expected: %d)", m.SeqNum, client.clientSeqNum)
				}
			} else {
				lsplog.Vlogf(4, "[Server] Recieved data packet has a wrong connId (Getting: %d) (Expected: %d)", m.ConnId, client.connId)
			}
			client.finished <- 1
		}
	} else {
		lsplog.Vlogf(4, "[Server] An acknowledgment packet is recieved.")
		client := srv.getClient(addr)
		if client != nil {
			<-client.finished
			client.epochCount = 0
			if m.ConnId == client.connId { // Make sure that the connId is the same as the client.
				<-srv.sentLocker
				deletedElements := list.New() // Delete all the elements that has been acknowledged
				for e := srv.sent.Front(); e != nil; e = e.Next() {
					request := e.Value.(*sentRequest)
					if request.message.SeqNum <= m.SeqNum { // If a higher sequence is recieved, that means that all previous were acknowleged.
						deletedElements.PushBack(e)
					}
				}
				for e := deletedElements.Front(); e != nil; e = e.Next() {
					srv.sent.Remove(e.Value.(*list.Element))
					client.closable--
				}
				srv.sentLocker <- 1
				if client.closeConnection == true && client.closable == 0 {
					//Remove client from map
					key := client.addr.IP.String() + ":" + strconv.Itoa(client.addr.Port)
					srv.clients[key] = nil
				}
			} else {
				lsplog.Vlogf(4, "[Server] Recieved data packet has a wrong connId (Getting: %d) (Expected: %d)", m.ConnId, client.connId)
			}
			client.finished <- 1
		} else {
			lsplog.Vlogf(4, "[Server] Recieved an Acknowledgment packet from an unknown client.")
		}
	}
}
Exemplo n.º 12
0
func (con *UDPConn) WriteToUDP(b []byte, addr *UDPAddr) (int, error) {
	ncon := con.ncon
	naddr := &net.UDPAddr{addr.IP, addr.Port}
	if dropit(writeDropPercent) {
		lsplog.Vlogf(5, "UDP: DROPPING written packet of length %v\n", len(b))
		// Make it look like write was successful
		return len(b), nil
	} else {
		n, err := ncon.WriteToUDP(b, naddr)
		lsplog.Vlogf(5, "UDP: Wrote packet of length %v", n)
		return n, err
	}
	return 0, nil
}
Exemplo n.º 13
0
func (ts *TestSystem) runtest(timeoutms int) {
	lspnet.SetWriteDropPercent(ts.DropPercent)
	if ts.Description != "" {
		fmt.Printf("Testing: %s\n", ts.Description)
	}
	go ts.runserver()
	for i := 0; i < ts.NClients; i++ {
		go ts.runclient(i)
	}
	go ts.runtimeout(timeoutms)
	for i := 0; i < ts.NClients; i++ {
		v := <-ts.CChan
		if v < 0 {
			ts.RunFlag = false
			ts.Tester.Logf("Test timed out after %f secs\n",
				float64(timeoutms)/1000.0)
			ts.Tester.FailNow()
		}
	}
	ts.RunFlag = false
	lsplog.Vlogf(0, "Passed: %d clients, %d messages/client, %.2f maxsleep, %.2f drop rate\n",
		ts.NClients, ts.NMessages,
		float64(ts.MaxSleepMilliseconds)/1000.0,
		float64(ts.DropPercent)/100.0)
	lsplog.SetVerbose(DefaultVerbosity)
	lspnet.SetWriteDropPercent(0)
}
Exemplo n.º 14
0
// Have client generate n messages and check that they are echoed.
func (ts *TestSystem) runclient(clienti int) {
	if clienti > ts.NClients {
		ts.Tester.Logf("Invalid client number %d\n", clienti)
		ts.Tester.FailNow()
	}
	cli := ts.Clients[clienti]
	for i := 0; i < ts.NMessages && ts.RunFlag; i++ {
		wt := ts.Rgen.Intn(100)
		werr := cli.Write(i2b(i + wt))
		if werr != nil {
			ts.Tester.Logf("Client write got error '%s'\n",
				werr.Error())
			ts.RunFlag = false
			ts.Tester.FailNow()
		}

		b, rerr := cli.Read()
		if rerr != nil {
			ts.Tester.Logf("Client read got error '%s'\n",
				rerr.Error())
			ts.RunFlag = false
			ts.Tester.FailNow()
		}
		v := b2i(b)
		if v != wt+i {
			ts.Tester.Logf("Client got %d.  Expected %d\n",
				v, i+wt)
			ts.RunFlag = false
			ts.Tester.FailNow()
		}
	}
	cli.Close()
	lsplog.Vlogf(0, "Client #%d completed %d messages\n", clienti, ts.NMessages)
	ts.CChan <- 0
}
Exemplo n.º 15
0
// Shutting down network communications
func (cli *LspClient) stopNetwork() {
	cli.lspConn.stopNetworkFlag = true
	err := cli.udpConn.Close()
	if lsplog.CheckReport(4, err) {
		lsplog.Vlogf(6, "Client Continuing\n")
	}
}
Exemplo n.º 16
0
// Function to coordinate tests
func (ts *SynchTestSystem) Master() {
	// Wait until server and all clients are ready
	ts.WaitServer()
	ts.WaitClients()
	lsplog.Vlogf(4, "Server + all clients started.  Shut off network\n")
	ts.SynchNetwork()
	// Network Off
	// Enable client writes
	if ts.Mode != doservertoclient {
		ts.ReadyClients()
		ts.WaitClients()
	}
	// Do fast close of client.  The calls will not be able to complete
	if ts.Mode == doclienttoserver {
		ts.ReadyClients()
	}
	if ts.Mode != doservertoclient {
		// Turn on network and delay
		ts.SynchNetwork()
		if ts.Mode == doclienttoserver {
			ts.WaitClients()
		}
		ts.SynchNetwork()
		// Network off
		// Enable server reads
		ts.ReadyServer()
		ts.WaitServer()
	}
	// Do server writes
	if ts.Mode != doclienttoserver {
		ts.ReadyServer()
		ts.WaitServer()
	}
	// Do fast close of server.  The calls will not be able to complete
	if ts.Mode != doroundtrip {
		ts.ReadyServer()
	}
	if ts.Mode != doclienttoserver {
		// Turn on network
		ts.SynchNetwork()
		if ts.Mode != doroundtrip {
			// If did quick close, should get responses from server
			ts.WaitServer()
		}
		// Network off again
		ts.SynchNetwork()
		// Enable client reads
		ts.ReadyClients()
		ts.WaitClients()
		// Enable client closes
		ts.ReadyClients()
		ts.WaitClients()
	}
	// Final close by server
	if ts.Mode == doroundtrip {
		ts.ReadyServer()
		ts.WaitServer()
	}
	// Made it!
}
Exemplo n.º 17
0
// Shut down all network activity
func (srv *LspServer) stopGlobalNetwork() {
	srv.stopGlobalNetworkFlag = true
	err := srv.udpConn.Close()
	if lsplog.CheckReport(4, err) {
		lsplog.Vlogf(6, "Server Continuing\n")
	}
}
Exemplo n.º 18
0
func (cli *LspClient) iWrite(payload []byte) error {
	lsplog.Vlogf(2, "[Client] Application is attempting to write")
	if cli.connectionAlive {
		go cli.iWriteHandler(payload) // Defers reading to the write handler so the application don't get blocked.
		return nil
	}
	return lsplog.MakeErr("Connection is no alive. Payload is ignored.")
}
Exemplo n.º 19
0
func (cli *LspClient) lspSend(message *LspMessage) {
	marshalled, err := json.Marshal(message)
	if err != nil {
		lsplog.CheckFatal(err)
	}
	lsplog.Vlogf(6, "[Client] Marshalled message: %s", marshalled)
	cli.udpConn.Write(marshalled)
}
Exemplo n.º 20
0
func (cli *LspClient) lspConnect() {
	e := cli.udpConnect()
	if e != nil {
		lsplog.CheckFatal(e)
		panic("[Client] Unable to establish a connection.")
	}
	connectMessage := CreateConnectionPacket()
	lsplog.Vlogf(5, "[Client] Inserting connection message into sent buffer.")
	<-cli.sentLocker
	cli.sent.PushBack(connectMessage)
	cli.sentLocker <- 1
	cli.lspSend(connectMessage)
	go cli.networkHandler() // Starts the network handler for reading. Making sure it is fired after a UDP is issued.
	go cli.epochHandler()
	<-cli.connectedSyncer // Wait for the connection to be established.
	lsplog.Vlogf(1, "[Client] Connection established completely.")
}
Exemplo n.º 21
0
func (cli *LspClient) epochHandler() {
	lsplog.Vlogf(3, "[Client] Started the epoch handler")
	for cli.epochCounter < cli.params.EpochLimit {
		epoch := time.Duration(cli.params.EpochMilliseconds) * time.Millisecond
		time.Sleep(epoch)
		lsplog.Vlogf(3, "[Client] Epoch has awaken.")
		<-cli.sentLocker
		for e := cli.sent.Front(); e != nil; e = e.Next() {
			m := e.Value.(*LspMessage)
			lsplog.Vlogf(5, "[Client] Epoch is sending: %+v", m)
			cli.lspSend(m)
		}
		if cli.closeConnection && cli.sent.Len() == 0 {
			lsplog.Vlogf(3, "[Client] Exiting the network handler")
			cli.sentLocker <- 1
			break
		}
		cli.sentLocker <- 1
		lsplog.Vlogf(6, "[Client] Sending last recieved ack to server %+v", cli.lastAck)
		if cli.lastAck != nil {
			cli.lspSend(cli.lastAck)
		}
		<-cli.epochLocker
		cli.epochCounter++
		lsplog.Vlogf(6, "[Client] Increased server epoch counter %d", cli.epochCounter)
		cli.epochLocker <- 1
	}
	cli.terminateConnection()
	lsplog.Vlogf(1, "[Client] Connection is terminated.")
}
Exemplo n.º 22
0
func (con *UDPConn) ReadFromUDP(b []byte) (n int, addr *UDPAddr, err error) {
	var buffer [2000]byte
	ncon := con.ncon
	var naddr *net.UDPAddr
	n, naddr, err = ncon.ReadFromUDP(buffer[0:])
	if dropit(readDropPercent) {
		lsplog.Vlogf(5, "UDP: DROPPING read packet of length %v\n", n)
	} else {
		lsplog.Vlogf(6, "UDP: Read packet of length %v\n", n)
		copy(b, buffer[0:])
	}
	if naddr == nil {
		addr = nil
	} else {
		addr = &UDPAddr{naddr.IP, naddr.Port}
	}
	return n, addr, err
}
Exemplo n.º 23
0
// Close only specified connection
func (srv *LspServer) iCloseConn(connId uint16) {
	lsplog.Vlogf(3, "[Server] Application closed %d", connId)
	for _, v := range srv.clients {
		if v.connId == connId {
			v.closeConnection = true
			return
		}
	}
}
Exemplo n.º 24
0
// Turn network off and on
func (ts *SynchTestSystem) RunNetwork() {
	// Network initially on
	lspnet.SetWriteDropPercent(0)
	for ts.RunFlag {
		lsplog.Vlogf(4, "Network running.  Waiting for master\n")
		<-ts.M2NChan
		lsplog.Vlogf(4, "Turning off network\n")
		lspnet.SetWriteDropPercent(100)
		ts.N2MChan <- true

		lsplog.Vlogf(4, "Network off.  Waiting for master\n")
		<-ts.M2NChan
		lsplog.Vlogf(4, "Turning network on and delaying\n")
		lspnet.SetWriteDropPercent(0)
		ts.N2MChan <- true
		ts.synchdelay(2.0)
	}
	lsplog.Vlogf(4, "Network handler exiting\n")
}
Exemplo n.º 25
0
func (cli *LspClient) iRead() ([]byte, error) {
	lsplog.Vlogf(2, "[Client] Application is attempting to read")
	if cli.connectionAlive {
		element := cli.read.Remove()
		if element == nil {
			return nil, lsplog.MakeErr("Connection is lost with server")
		}
		return element.([]byte), nil
	}
	return nil, lsplog.MakeErr("Connection is lost. Cannot read.")
}
Exemplo n.º 26
0
// Write message to specified client
func (srv *LspServer) iWrite(connId uint16, payload []byte) error {
	lsplog.Vlogf(2, "[Server] Application is writing")
	for _, v := range srv.clients { // Looks for the client to send
		if v.connId == connId {
			m := CreateDataPacket(connId, v.serverSeqNum, payload)
			go srv.iWriteHandler(m, v)
			return nil
		}
	}
	return lsplog.MakeErr("Could not find specified connId")
}
Exemplo n.º 27
0
func (cli *LspClient) iWrite(payload []byte) error {
	// Will fill in ID & sequence number later
	m := GenDataMessage(0, 0, payload)
	cli.appWriteChan <- m
	rm := <-cli.writeReplyChan
	lsplog.Vlogf(5, "Completed write of %s", string(payload))
	if rm != nil {
		// Recycle so that subsequent writes will get error
		cli.writeReplyChan <- rm
	}
	return rm
}
Exemplo n.º 28
0
func main() {
	lsplog.SetVerbose(3)
	lsplog.Vlogf(3, "[Request] Request has started")
	lsplog.Vlogf(3, "[Request] Args: %s", os.Args)
	hostport := os.Args[1]
	var e error
	client, e = lsp12.NewLspClient(hostport, &lsp12.LspParams{5, 2000})
	if e != nil {
		lsplog.Vlogf(3, "[Worker] Connection to server failed.")
	}
	joinRequest := "J"
	lsplog.Vlogf(3, "[worker] Sending: %s", joinRequest)
	client.Write([]byte(joinRequest))
	for {
		response, err := client.Read()
		if err != nil {
			return
		}

		lsplog.Vlogf(3, "[Worker] Recieved: %s", string(response))
		responseParts := strings.Split(string(response), " ")
		if len(responseParts) == 4 {
			hash := responseParts[1]
			lsplog.Vlogf(3, "[Worker] Hash: %s", hash)
			lower, _ := strconv.Atoi(responseParts[2])
			upper, _ := strconv.Atoi(responseParts[3])
			go getPassword(hash, lower, upper)
		} else {
			suspended = true
		}
	}
}
Exemplo n.º 29
0
func (cli *LspClient) readPacket() (m *LspMessage, addr *lspnet.UDPAddr, e error) {
	b := make([]byte, 1000)
	n, addr, err := cli.udpConn.ReadFromUDP(b)
	if addr == nil || n == 0 {
		lsplog.Vlogf(3, "[Client] Recieved a terminating packet.")
		return nil, addr, lsplog.ConnectionClosed()
	} else {
		lsplog.Vlogf(5, "[Client] Recieved a packet from %s:%d", addr.IP.String(), addr.Port)
	}
	if err != nil {
		lsplog.CheckFatal(err)
		return nil, nil, err
	}
	recieved := CreateEmptyPacket()
	err = json.Unmarshal(b[0:n], recieved)
	if err != nil {
		lsplog.CheckReport(3, err)
		return nil, addr, err
	}
	lsplog.Vlogf(6, "[Client] Recieved packet %+v", recieved)
	return recieved, addr, err
}
Exemplo n.º 30
0
func (srv *LspServer) handleConnectionRequest(addr *lspnet.UDPAddr) {
	key := addr.IP.String() + ":" + strconv.Itoa(addr.Port)
	var client *clientRepresenter
	if srv.clients[key] == nil {
		lsplog.Vlogf(6, "[Server] A new client is being connected %s", key)
		client = new(clientRepresenter)
		srv.idGenerator++
		client.connId = srv.idGenerator
		client.seq = 1
		client.addr = addr
		client.finished = make(chan int, 1)
		client.finished <- 1
		client.clientSeqNum = 1
		client.serverSeqNum = 1
		srv.clients[key] = client
		lsplog.Vlogf(3, "[Server] A new client is connected %+v", client)
	} else {
		client = srv.clients[key]
	}
	m := CreateConnnectionAckPacket(client.connId)
	srv.lspSend(m, client)
	client.lastAck = m
}