Exemplo n.º 1
0
Arquivo: cgen.go Projeto: rsc/tmp
func stackcopy(n, ns *gc.Node, osrc, odst, w int64) {
	var noddi gc.Node
	gc.Nodreg(&noddi, gc.Types[gc.Tptr], x86.REG_DI)
	var nodsi gc.Node
	gc.Nodreg(&nodsi, gc.Types[gc.Tptr], x86.REG_SI)

	var nodl gc.Node
	var nodr gc.Node
	if n.Ullman >= ns.Ullman {
		gc.Agenr(n, &nodr, &nodsi)
		if ns.Op == gc.ONAME {
			gc.Gvardef(ns)
		}
		gc.Agenr(ns, &nodl, &noddi)
	} else {
		if ns.Op == gc.ONAME {
			gc.Gvardef(ns)
		}
		gc.Agenr(ns, &nodl, &noddi)
		gc.Agenr(n, &nodr, &nodsi)
	}

	if nodl.Reg != x86.REG_DI {
		gmove(&nodl, &noddi)
	}
	if nodr.Reg != x86.REG_SI {
		gmove(&nodr, &nodsi)
	}
	gc.Regfree(&nodl)
	gc.Regfree(&nodr)

	c := w % 8 // bytes
	q := w / 8 // quads

	var oldcx gc.Node
	var cx gc.Node
	savex(x86.REG_CX, &cx, &oldcx, nil, gc.Types[gc.TINT64])

	// if we are copying forward on the stack and
	// the src and dst overlap, then reverse direction
	if osrc < odst && odst < osrc+w {
		// reverse direction
		gins(x86.ASTD, nil, nil) // set direction flag
		if c > 0 {
			gconreg(addptr, w-1, x86.REG_SI)
			gconreg(addptr, w-1, x86.REG_DI)

			gconreg(movptr, c, x86.REG_CX)
			gins(x86.AREP, nil, nil)   // repeat
			gins(x86.AMOVSB, nil, nil) // MOVB *(SI)-,*(DI)-
		}

		if q > 0 {
			if c > 0 {
				gconreg(addptr, -7, x86.REG_SI)
				gconreg(addptr, -7, x86.REG_DI)
			} else {
				gconreg(addptr, w-8, x86.REG_SI)
				gconreg(addptr, w-8, x86.REG_DI)
			}

			gconreg(movptr, q, x86.REG_CX)
			gins(x86.AREP, nil, nil)   // repeat
			gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)-,*(DI)-
		}

		// we leave with the flag clear
		gins(x86.ACLD, nil, nil)
	} else {
		// normal direction
		if q > 128 || (gc.Nacl && q >= 4) {
			gconreg(movptr, q, x86.REG_CX)
			gins(x86.AREP, nil, nil)   // repeat
			gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)+,*(DI)+
		} else if q >= 4 {
			p := gins(obj.ADUFFCOPY, nil, nil)
			p.To.Type = obj.TYPE_ADDR
			p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))

			// 14 and 128 = magic constants: see ../../runtime/asm_amd64.s
			p.To.Offset = 14 * (128 - q)
		} else if !gc.Nacl && c == 0 {
			// We don't need the MOVSQ side-effect of updating SI and DI,
			// and issuing a sequence of MOVQs directly is faster.
			nodsi.Op = gc.OINDREG

			noddi.Op = gc.OINDREG
			for q > 0 {
				gmove(&nodsi, &cx) // MOVQ x+(SI),CX
				gmove(&cx, &noddi) // MOVQ CX,x+(DI)
				nodsi.Xoffset += 8
				noddi.Xoffset += 8
				q--
			}
		} else {
			for q > 0 {
				gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)+,*(DI)+
				q--
			}
		}

		// copy the remaining c bytes
		if w < 4 || c <= 1 || (odst < osrc && osrc < odst+w) {
			for c > 0 {
				gins(x86.AMOVSB, nil, nil) // MOVB *(SI)+,*(DI)+
				c--
			}
		} else if w < 8 || c <= 4 {
			nodsi.Op = gc.OINDREG
			noddi.Op = gc.OINDREG
			cx.Type = gc.Types[gc.TINT32]
			nodsi.Type = gc.Types[gc.TINT32]
			noddi.Type = gc.Types[gc.TINT32]
			if c > 4 {
				nodsi.Xoffset = 0
				noddi.Xoffset = 0
				gmove(&nodsi, &cx)
				gmove(&cx, &noddi)
			}

			nodsi.Xoffset = c - 4
			noddi.Xoffset = c - 4
			gmove(&nodsi, &cx)
			gmove(&cx, &noddi)
		} else {
			nodsi.Op = gc.OINDREG
			noddi.Op = gc.OINDREG
			cx.Type = gc.Types[gc.TINT64]
			nodsi.Type = gc.Types[gc.TINT64]
			noddi.Type = gc.Types[gc.TINT64]
			nodsi.Xoffset = c - 8
			noddi.Xoffset = c - 8
			gmove(&nodsi, &cx)
			gmove(&cx, &noddi)
		}
	}

	restx(&cx, &oldcx)
}
Exemplo n.º 2
0
Arquivo: ggen.go Projeto: rsc/tmp
func clearfat(nl *gc.Node) {
	/* clear a fat object */
	if gc.Debug['g'] != 0 {
		gc.Dump("\nclearfat", nl)
	}

	w := nl.Type.Width

	// Avoid taking the address for simple enough types.
	if gc.Componentgen(nil, nl) {
		return
	}

	c := w % 8 // bytes
	q := w / 8 // quads

	if q < 4 {
		// Write sequence of MOV 0, off(base) instead of using STOSQ.
		// The hope is that although the code will be slightly longer,
		// the MOVs will have no dependencies and pipeline better
		// than the unrolled STOSQ loop.
		// NOTE: Must use agen, not igen, so that optimizer sees address
		// being taken. We are not writing on field boundaries.
		var n1 gc.Node
		gc.Agenr(nl, &n1, nil)

		n1.Op = gc.OINDREG
		var z gc.Node
		gc.Nodconst(&z, gc.Types[gc.TUINT64], 0)
		for {
			tmp14 := q
			q--
			if tmp14 <= 0 {
				break
			}
			n1.Type = z.Type
			gins(x86.AMOVQ, &z, &n1)
			n1.Xoffset += 8
		}

		if c >= 4 {
			gc.Nodconst(&z, gc.Types[gc.TUINT32], 0)
			n1.Type = z.Type
			gins(x86.AMOVL, &z, &n1)
			n1.Xoffset += 4
			c -= 4
		}

		gc.Nodconst(&z, gc.Types[gc.TUINT8], 0)
		for {
			tmp15 := c
			c--
			if tmp15 <= 0 {
				break
			}
			n1.Type = z.Type
			gins(x86.AMOVB, &z, &n1)
			n1.Xoffset++
		}

		gc.Regfree(&n1)
		return
	}

	var oldn1 gc.Node
	var n1 gc.Node
	savex(x86.REG_DI, &n1, &oldn1, nil, gc.Types[gc.Tptr])
	gc.Agen(nl, &n1)

	var ax gc.Node
	var oldax gc.Node
	savex(x86.REG_AX, &ax, &oldax, nil, gc.Types[gc.Tptr])
	gconreg(x86.AMOVL, 0, x86.REG_AX)

	if q > 128 || gc.Nacl {
		gconreg(movptr, q, x86.REG_CX)
		gins(x86.AREP, nil, nil)   // repeat
		gins(x86.ASTOSQ, nil, nil) // STOQ AL,*(DI)+
	} else {
		if di := dzDI(q); di != 0 {
			gconreg(addptr, di, x86.REG_DI)
		}
		p := gins(obj.ADUFFZERO, nil, nil)
		p.To.Type = obj.TYPE_ADDR
		p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
		p.To.Offset = dzOff(q)
	}

	z := ax
	di := n1
	if w >= 8 && c >= 4 {
		di.Op = gc.OINDREG
		z.Type = gc.Types[gc.TINT64]
		di.Type = z.Type
		p := gins(x86.AMOVQ, &z, &di)
		p.To.Scale = 1
		p.To.Offset = c - 8
	} else if c >= 4 {
		di.Op = gc.OINDREG
		z.Type = gc.Types[gc.TINT32]
		di.Type = z.Type
		gins(x86.AMOVL, &z, &di)
		if c > 4 {
			p := gins(x86.AMOVL, &z, &di)
			p.To.Scale = 1
			p.To.Offset = c - 4
		}
	} else {
		for c > 0 {
			gins(x86.ASTOSB, nil, nil) // STOB AL,*(DI)+
			c--
		}
	}

	restx(&n1, &oldn1)
	restx(&ax, &oldax)
}