Пример #1
0
func TestProducerReturnsExpectationsToChannels(t *testing.T) {
	config := sarama.NewConfig()
	config.Producer.Return.Successes = true
	mp := NewAsyncProducer(t, config)

	mp.ExpectInputAndSucceed()
	mp.ExpectInputAndSucceed()
	mp.ExpectInputAndFail(sarama.ErrOutOfBrokers)

	mp.Input() <- &sarama.ProducerMessage{Topic: "test 1"}
	mp.Input() <- &sarama.ProducerMessage{Topic: "test 2"}
	mp.Input() <- &sarama.ProducerMessage{Topic: "test 3"}

	msg1 := <-mp.Successes()
	msg2 := <-mp.Successes()
	err1 := <-mp.Errors()

	if msg1.Topic != "test 1" {
		t.Error("Expected message 1 to be returned first")
	}

	if msg2.Topic != "test 2" {
		t.Error("Expected message 2 to be returned second")
	}

	if err1.Msg.Topic != "test 3" || err1.Err != sarama.ErrOutOfBrokers {
		t.Error("Expected message 3 to be returned as error")
	}

	if err := mp.Close(); err != nil {
		t.Error(err)
	}
}
Пример #2
0
func newAccessLogProducer(brokerList []string) sarama.AsyncProducer {

	// For the access log, we are looking for AP semantics, with high throughput.
	// By creating batches of compressed messages, we reduce network I/O at a cost of more latency.
	config := sarama.NewConfig()
	tlsConfig := createTlsConfiguration()
	if tlsConfig != nil {
		config.Net.TLS.Enable = true
		config.Net.TLS.Config = tlsConfig
	}
	config.Producer.RequiredAcks = sarama.WaitForLocal       // Only wait for the leader to ack
	config.Producer.Compression = sarama.CompressionSnappy   // Compress messages
	config.Producer.Flush.Frequency = 500 * time.Millisecond // Flush batches every 500ms

	producer, err := sarama.NewAsyncProducer(brokerList, config)
	if err != nil {
		log.Fatalln("Failed to start Sarama producer:", err)
	}

	// We will just log to STDOUT if we're not able to produce messages.
	// Note: messages will only be returned here after all retry attempts are exhausted.
	go func() {
		for err := range producer.Errors() {
			log.Println("Failed to write access log entry:", err)
		}
	}()

	return producer
}
Пример #3
0
func newDataCollector(brokerList []string) sarama.SyncProducer {

	// For the data collector, we are looking for strong consistency semantics.
	// Because we don't change the flush settings, sarama will try to produce messages
	// as fast as possible to keep latency low.
	config := sarama.NewConfig()
	config.Producer.RequiredAcks = sarama.WaitForAll // Wait for all in-sync replicas to ack the message
	config.Producer.Retry.Max = 10                   // Retry up to 10 times to produce the message
	tlsConfig := createTlsConfiguration()
	if tlsConfig != nil {
		config.Net.TLS.Config = tlsConfig
		config.Net.TLS.Enable = true
	}

	// On the broker side, you may want to change the following settings to get
	// stronger consistency guarantees:
	// - For your broker, set `unclean.leader.election.enable` to false
	// - For the topic, you could increase `min.insync.replicas`.

	producer, err := sarama.NewSyncProducer(brokerList, config)
	if err != nil {
		log.Fatalln("Failed to start Sarama producer:", err)
	}

	return producer
}
Пример #4
0
// NewConsumer returns a new mock Consumer instance. The t argument should
// be the *testing.T instance of your test method. An error will be written to it if
// an expectation is violated. The config argument is currently unused and can be set to nil.
func NewConsumer(t ErrorReporter, config *sarama.Config) *Consumer {
	if config == nil {
		config = sarama.NewConfig()
	}

	c := &Consumer{
		t:                  t,
		config:             config,
		partitionConsumers: make(map[string]map[int32]*PartitionConsumer),
	}
	return c
}
Пример #5
0
// NewAsyncProducer instantiates a new Producer mock. The t argument should
// be the *testing.T instance of your test method. An error will be written to it if
// an expectation is violated. The config argument is used to determine whether it
// should ack successes on the Successes channel.
func NewAsyncProducer(t ErrorReporter, config *sarama.Config) *AsyncProducer {
	if config == nil {
		config = sarama.NewConfig()
	}
	mp := &AsyncProducer{
		t:            t,
		closed:       make(chan struct{}, 0),
		expectations: make([]*producerExpectation, 0),
		input:        make(chan *sarama.ProducerMessage, config.ChannelBufferSize),
		successes:    make(chan *sarama.ProducerMessage, config.ChannelBufferSize),
		errors:       make(chan *sarama.ProducerError, config.ChannelBufferSize),
	}

	go func() {
		defer func() {
			close(mp.successes)
			close(mp.errors)
		}()

		for msg := range mp.input {
			mp.l.Lock()
			if mp.expectations == nil || len(mp.expectations) == 0 {
				mp.expectations = nil
				mp.t.Errorf("No more expectation set on this mock producer to handle the input message.")
			} else {
				expectation := mp.expectations[0]
				mp.expectations = mp.expectations[1:]
				if expectation.Result == errProduceSuccess {
					mp.lastOffset++
					if config.Producer.Return.Successes {
						msg.Offset = mp.lastOffset
						mp.successes <- msg
					}
				} else {
					if config.Producer.Return.Errors {
						mp.errors <- &sarama.ProducerError{Err: expectation.Result, Msg: msg}
					}
				}
			}
			mp.l.Unlock()
		}

		mp.l.Lock()
		if len(mp.expectations) > 0 {
			mp.t.Errorf("Expected to exhaust all expectations, but %d are left.", len(mp.expectations))
		}
		mp.l.Unlock()

		close(mp.closed)
	}()

	return mp
}
Пример #6
0
func main() {
	flag.Parse()

	if *brokerList == "" {
		printUsageErrorAndExit("no -brokers specified. Alternatively, set the KAFKA_PEERS environment variable")
	}

	if *topic == "" {
		printUsageErrorAndExit("no -topic specified")
	}

	if *verbose {
		sarama.Logger = logger
	}

	config := sarama.NewConfig()
	config.Producer.RequiredAcks = sarama.WaitForAll

	switch *partitioner {
	case "":
		if *partition >= 0 {
			config.Producer.Partitioner = sarama.NewManualPartitioner
		} else {
			config.Producer.Partitioner = sarama.NewHashPartitioner
		}
	case "hash":
		config.Producer.Partitioner = sarama.NewHashPartitioner
	case "random":
		config.Producer.Partitioner = sarama.NewRandomPartitioner
	case "manual":
		config.Producer.Partitioner = sarama.NewManualPartitioner
		if *partition == -1 {
			printUsageErrorAndExit("-partition is required when partitioning manually")
		}
	default:
		printUsageErrorAndExit(fmt.Sprintf("Partitioner %s not supported.", *partitioner))
	}

	message := &sarama.ProducerMessage{Topic: *topic, Partition: int32(*partition)}

	if *key != "" {
		message.Key = sarama.StringEncoder(*key)
	}

	if *value != "" {
		message.Value = sarama.StringEncoder(*value)
	} else if stdinAvailable() {
		bytes, err := ioutil.ReadAll(os.Stdin)
		if err != nil {
			printErrorAndExit(66, "Failed to read data from the standard input: %s", err)
		}
		message.Value = sarama.ByteEncoder(bytes)
	} else {
		printUsageErrorAndExit("-value is required, or you have to provide the value on stdin")
	}

	producer, err := sarama.NewSyncProducer(strings.Split(*brokerList, ","), config)
	if err != nil {
		printErrorAndExit(69, "Failed to open Kafka producer: %s", err)
	}
	defer func() {
		if err := producer.Close(); err != nil {
			logger.Println("Failed to close Kafka producer cleanly:", err)
		}
	}()

	partition, offset, err := producer.SendMessage(message)
	if err != nil {
		printErrorAndExit(69, "Failed to produce message: %s", err)
	} else if !*silent {
		fmt.Printf("topic=%s\tpartition=%d\toffset=%d\n", *topic, partition, offset)
	}
}