Пример #1
0
func ExampleGlacier_SetVaultNotifications() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := glacier.New(sess)

	params := &glacier.SetVaultNotificationsInput{
		AccountId: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		VaultNotificationConfig: &glacier.VaultNotificationConfig{
			Events: []*string{
				aws.String("string"), // Required
				// More values...
			},
			SNSTopic: aws.String("string"),
		},
	}
	resp, err := svc.SetVaultNotifications(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #2
0
func ExampleGlacier_SetDataRetrievalPolicy() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := glacier.New(sess)

	params := &glacier.SetDataRetrievalPolicyInput{
		AccountId: aws.String("string"), // Required
		Policy: &glacier.DataRetrievalPolicy{
			Rules: []*glacier.DataRetrievalRule{
				{ // Required
					BytesPerHour: aws.Int64(1),
					Strategy:     aws.String("string"),
				},
				// More values...
			},
		},
	}
	resp, err := svc.SetDataRetrievalPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #3
0
func ExampleGlacier_AddTagsToVault() {
	svc := glacier.New(nil)

	params := &glacier.AddTagsToVaultInput{
		AccountID: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		Tags: map[string]*string{
			"Key": aws.String("TagValue"), // Required
			// More values...
		},
	}
	resp, err := svc.AddTagsToVault(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}
Пример #4
0
func ExampleGlacier_SetVaultAccessPolicy() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := glacier.New(sess)

	params := &glacier.SetVaultAccessPolicyInput{
		AccountId: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		Policy: &glacier.VaultAccessPolicy{
			Policy: aws.String("string"),
		},
	}
	resp, err := svc.SetVaultAccessPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #5
0
func ExampleGlacier_CompleteMultipartUpload() {
	svc := glacier.New(nil)

	params := &glacier.CompleteMultipartUploadInput{
		AccountID:   aws.String("string"), // Required
		UploadID:    aws.String("string"), // Required
		VaultName:   aws.String("string"), // Required
		ArchiveSize: aws.String("string"),
		Checksum:    aws.String("string"),
	}
	resp, err := svc.CompleteMultipartUpload(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}
Пример #6
0
func ExampleGlacier_RemoveTagsFromVault() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := glacier.New(sess)

	params := &glacier.RemoveTagsFromVaultInput{
		AccountId: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		TagKeys: []*string{
			aws.String("string"), // Required
			// More values...
		},
	}
	resp, err := svc.RemoveTagsFromVault(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #7
0
func ExampleGlacier_InitiateMultipartUpload() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := glacier.New(sess)

	params := &glacier.InitiateMultipartUploadInput{
		AccountId:          aws.String("string"), // Required
		VaultName:          aws.String("string"), // Required
		ArchiveDescription: aws.String("string"),
		PartSize:           aws.String("string"),
	}
	resp, err := svc.InitiateMultipartUpload(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #8
0
func ExampleGlacier_ListVaults() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := glacier.New(sess)

	params := &glacier.ListVaultsInput{
		AccountId: aws.String("string"), // Required
		Limit:     aws.String("string"),
		Marker:    aws.String("string"),
	}
	resp, err := svc.ListVaults(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #9
0
func ExampleGlacier_UploadMultipartPart() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := glacier.New(sess)

	params := &glacier.UploadMultipartPartInput{
		AccountId: aws.String("string"), // Required
		UploadId:  aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		Body:      bytes.NewReader([]byte("PAYLOAD")),
		Checksum:  aws.String("string"),
		Range:     aws.String("string"),
	}
	resp, err := svc.UploadMultipartPart(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #10
0
func ExampleGlacier_SetDataRetrievalPolicy() {
	svc := glacier.New(nil)

	params := &glacier.SetDataRetrievalPolicyInput{
		AccountId: aws.String("string"), // Required
		Policy: &glacier.DataRetrievalPolicy{
			Rules: []*glacier.DataRetrievalRule{
				{ // Required
					BytesPerHour: aws.Int64(1),
					Strategy:     aws.String("string"),
				},
				// More values...
			},
		},
	}
	resp, err := svc.SetDataRetrievalPolicy(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}
Пример #11
0
func ExampleGlacier_ListVaults() {
	svc := glacier.New(nil)

	params := &glacier.ListVaultsInput{
		AccountId: aws.String("string"), // Required
		Limit:     aws.String("string"),
		Marker:    aws.String("string"),
	}
	resp, err := svc.ListVaults(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}
Пример #12
0
func ExampleGlacier_SetVaultNotifications() {
	svc := glacier.New(nil)

	params := &glacier.SetVaultNotificationsInput{
		AccountId: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		VaultNotificationConfig: &glacier.VaultNotificationConfig{
			Events: []*string{
				aws.String("string"), // Required
				// More values...
			},
			SNSTopic: aws.String("string"),
		},
	}
	resp, err := svc.SetVaultNotifications(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}
Пример #13
0
func ExampleGlacier_UploadMultipartPart() {
	svc := glacier.New(nil)

	params := &glacier.UploadMultipartPartInput{
		AccountId: aws.String("string"), // Required
		UploadId:  aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		Body:      bytes.NewReader([]byte("PAYLOAD")),
		Checksum:  aws.String("string"),
		Range:     aws.String("string"),
	}
	resp, err := svc.UploadMultipartPart(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}
Пример #14
0
func ExampleGlacier_InitiateJob() {
	svc := glacier.New(session.New())

	params := &glacier.InitiateJobInput{
		AccountId: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		JobParameters: &glacier.JobParameters{
			ArchiveId:   aws.String("string"),
			Description: aws.String("string"),
			Format:      aws.String("string"),
			InventoryRetrievalParameters: &glacier.InventoryRetrievalJobInput{
				EndDate:   aws.String("string"),
				Limit:     aws.String("string"),
				Marker:    aws.String("string"),
				StartDate: aws.String("string"),
			},
			RetrievalByteRange: aws.String("string"),
			SNSTopic:           aws.String("string"),
			Type:               aws.String("string"),
		},
	}
	resp, err := svc.InitiateJob(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #15
0
func (gs GlacierStorage) getStorageClient() *glacier.Glacier {
	creds := credentials.NewStaticCredentials(gs.aws_access_key_id, gs.aws_secret_access_key, "")

	return glacier.New(&aws.Config{
		Region:      aws.String(gs.region),
		Credentials: creds,
		LogLevel:    aws.LogLevel(1),
	})
}
Пример #16
0
// Initialise anything in the backup service that needs to be created prior to uploading files. In this instance we need
// to create a vault for the backup to hold any archives.
func (agss *AmazonGlacierBackupService) Init() error {
	agss.setEnvvars()
	agss.GlacierService = glacier.New(session.New(), &aws.Config{})

	err := agss.createVault(agss.VaultName)
	if err != nil {
		return err
	}

	return nil
}
Пример #17
0
func ExampleGlacier_GetDataRetrievalPolicy() {
	svc := glacier.New(session.New())

	params := &glacier.GetDataRetrievalPolicyInput{
		AccountId: aws.String("string"), // Required
	}
	resp, err := svc.GetDataRetrievalPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #18
0
func ExampleGlacier_ListTagsForVault() {
	svc := glacier.New(session.New())

	params := &glacier.ListTagsForVaultInput{
		AccountId: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
	}
	resp, err := svc.ListTagsForVault(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #19
0
func ExampleGlacier_GetVaultNotifications() {
	svc := glacier.New(nil)

	params := &glacier.GetVaultNotificationsInput{
		AccountId: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
	}
	resp, err := svc.GetVaultNotifications(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #20
0
func ExampleGlacier_InitiateJob() {
	svc := glacier.New(nil)

	params := &glacier.InitiateJobInput{
		AccountId: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		JobParameters: &glacier.JobParameters{
			ArchiveId:   aws.String("string"),
			Description: aws.String("string"),
			Format:      aws.String("string"),
			InventoryRetrievalParameters: &glacier.InventoryRetrievalJobInput{
				EndDate:   aws.String("string"),
				Limit:     aws.String("string"),
				Marker:    aws.String("string"),
				StartDate: aws.String("string"),
			},
			RetrievalByteRange: aws.String("string"),
			SNSTopic:           aws.String("string"),
			Type:               aws.String("string"),
		},
	}
	resp, err := svc.InitiateJob(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}
Пример #21
0
func ExampleGlacier_ListMultipartUploads() {
	svc := glacier.New(nil)

	params := &glacier.ListMultipartUploadsInput{
		AccountId: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		Limit:     aws.String("string"),
		Marker:    aws.String("string"),
	}
	resp, err := svc.ListMultipartUploads(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #22
0
func ExampleGlacier_InitiateVaultLock() {
	svc := glacier.New(session.New())

	params := &glacier.InitiateVaultLockInput{
		AccountId: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		Policy: &glacier.VaultLockPolicy{
			Policy: aws.String("string"),
		},
	}
	resp, err := svc.InitiateVaultLock(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #23
0
func ExampleGlacier_UploadArchive() {
	svc := glacier.New(session.New())

	params := &glacier.UploadArchiveInput{
		AccountId:          aws.String("string"), // Required
		VaultName:          aws.String("string"), // Required
		ArchiveDescription: aws.String("string"),
		Body:               bytes.NewReader([]byte("PAYLOAD")),
		Checksum:           aws.String("string"),
	}
	resp, err := svc.UploadArchive(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #24
0
func ExampleGlacier_CompleteMultipartUpload() {
	svc := glacier.New(session.New())

	params := &glacier.CompleteMultipartUploadInput{
		AccountId:   aws.String("string"), // Required
		UploadId:    aws.String("string"), // Required
		VaultName:   aws.String("string"), // Required
		ArchiveSize: aws.String("string"),
		Checksum:    aws.String("string"),
	}
	resp, err := svc.CompleteMultipartUpload(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #25
0
func ExampleGlacier_AddTagsToVault() {
	svc := glacier.New(session.New())

	params := &glacier.AddTagsToVaultInput{
		AccountId: aws.String("string"), // Required
		VaultName: aws.String("string"), // Required
		Tags: map[string]*string{
			"Key": aws.String("TagValue"), // Required
			// More values...
		},
	}
	resp, err := svc.AddTagsToVault(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #26
0
func ExampleGlacier_PurchaseProvisionedCapacity() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := glacier.New(sess)

	params := &glacier.PurchaseProvisionedCapacityInput{
		AccountId: aws.String("string"), // Required
	}
	resp, err := svc.PurchaseProvisionedCapacity(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Пример #27
0
// Client configures and returns a fully initialized AWSClient
func (c *Config) Client() (interface{}, error) {
	// Get the auth and region. This can fail if keys/regions were not
	// specified and we're attempting to use the environment.
	var errs []error

	log.Println("[INFO] Building AWS region structure")
	err := c.ValidateRegion()
	if err != nil {
		errs = append(errs, err)
	}

	var client AWSClient
	if len(errs) == 0 {
		// store AWS region in client struct, for region specific operations such as
		// bucket storage in S3
		client.region = c.Region

		log.Println("[INFO] Building AWS auth structure")
		creds := GetCredentials(c.AccessKey, c.SecretKey, c.Token, c.Profile, c.CredsFilename)
		// Call Get to check for credential provider. If nothing found, we'll get an
		// error, and we can present it nicely to the user
		cp, err := creds.Get()
		if err != nil {
			if awsErr, ok := err.(awserr.Error); ok && awsErr.Code() == "NoCredentialProviders" {
				errs = append(errs, fmt.Errorf(`No valid credential sources found for AWS Provider.
  Please see https://terraform.io/docs/providers/aws/index.html for more information on
  providing credentials for the AWS Provider`))
			} else {
				errs = append(errs, fmt.Errorf("Error loading credentials for AWS Provider: %s", err))
			}
			return nil, &multierror.Error{Errors: errs}
		}

		log.Printf("[INFO] AWS Auth provider used: %q", cp.ProviderName)

		awsConfig := &aws.Config{
			Credentials: creds,
			Region:      aws.String(c.Region),
			MaxRetries:  aws.Int(c.MaxRetries),
			HTTPClient:  cleanhttp.DefaultClient(),
		}

		if logging.IsDebugOrHigher() {
			awsConfig.LogLevel = aws.LogLevel(aws.LogDebugWithHTTPBody)
			awsConfig.Logger = awsLogger{}
		}

		if c.Insecure {
			transport := awsConfig.HTTPClient.Transport.(*http.Transport)
			transport.TLSClientConfig = &tls.Config{
				InsecureSkipVerify: true,
			}
		}

		// Set up base session
		sess := session.New(awsConfig)
		sess.Handlers.Build.PushFrontNamed(addTerraformVersionToUserAgent)

		// Some services exist only in us-east-1, e.g. because they manage
		// resources that can span across multiple regions, or because
		// signature format v4 requires region to be us-east-1 for global
		// endpoints:
		// http://docs.aws.amazon.com/general/latest/gr/sigv4_changes.html
		usEast1Sess := sess.Copy(&aws.Config{Region: aws.String("us-east-1")})

		// Some services have user-configurable endpoints
		awsEc2Sess := sess.Copy(&aws.Config{Endpoint: aws.String(c.Ec2Endpoint)})
		awsElbSess := sess.Copy(&aws.Config{Endpoint: aws.String(c.ElbEndpoint)})
		awsIamSess := sess.Copy(&aws.Config{Endpoint: aws.String(c.IamEndpoint)})
		dynamoSess := sess.Copy(&aws.Config{Endpoint: aws.String(c.DynamoDBEndpoint)})
		kinesisSess := sess.Copy(&aws.Config{Endpoint: aws.String(c.KinesisEndpoint)})

		// These two services need to be set up early so we can check on AccountID
		client.iamconn = iam.New(awsIamSess)
		client.stsconn = sts.New(sess)

		err = c.ValidateCredentials(client.stsconn)
		if err != nil {
			errs = append(errs, err)
			return nil, &multierror.Error{Errors: errs}
		}
		accountId, err := GetAccountId(client.iamconn, client.stsconn, cp.ProviderName)
		if err == nil {
			client.accountid = accountId
		}

		authErr := c.ValidateAccountId(client.accountid)
		if authErr != nil {
			errs = append(errs, authErr)
		}

		client.apigateway = apigateway.New(sess)
		client.autoscalingconn = autoscaling.New(sess)
		client.cfconn = cloudformation.New(sess)
		client.cloudfrontconn = cloudfront.New(sess)
		client.cloudtrailconn = cloudtrail.New(sess)
		client.cloudwatchconn = cloudwatch.New(sess)
		client.cloudwatcheventsconn = cloudwatchevents.New(sess)
		client.cloudwatchlogsconn = cloudwatchlogs.New(sess)
		client.codecommitconn = codecommit.New(usEast1Sess)
		client.codedeployconn = codedeploy.New(sess)
		client.dsconn = directoryservice.New(sess)
		client.dynamodbconn = dynamodb.New(dynamoSess)
		client.ec2conn = ec2.New(awsEc2Sess)
		client.ecrconn = ecr.New(sess)
		client.ecsconn = ecs.New(sess)
		client.efsconn = efs.New(sess)
		client.elasticacheconn = elasticache.New(sess)
		client.elasticbeanstalkconn = elasticbeanstalk.New(sess)
		client.elastictranscoderconn = elastictranscoder.New(sess)
		client.elbconn = elb.New(awsElbSess)
		client.emrconn = emr.New(sess)
		client.esconn = elasticsearch.New(sess)
		client.firehoseconn = firehose.New(sess)
		client.glacierconn = glacier.New(sess)
		client.kinesisconn = kinesis.New(kinesisSess)
		client.kmsconn = kms.New(sess)
		client.lambdaconn = lambda.New(sess)
		client.opsworksconn = opsworks.New(usEast1Sess)
		client.r53conn = route53.New(usEast1Sess)
		client.rdsconn = rds.New(sess)
		client.redshiftconn = redshift.New(sess)
		client.simpledbconn = simpledb.New(sess)
		client.s3conn = s3.New(sess)
		client.sesConn = ses.New(sess)
		client.snsconn = sns.New(sess)
		client.sqsconn = sqs.New(sess)
	}

	if len(errs) > 0 {
		return nil, &multierror.Error{Errors: errs}
	}

	return &client, nil
}
Пример #28
0
// Client configures and returns a fully initialized AWSClient
func (c *Config) Client() (interface{}, error) {
	var client AWSClient

	// Get the auth and region. This can fail if keys/regions were not
	// specified and we're attempting to use the environment.
	var errs []error

	log.Println("[INFO] Building AWS region structure")
	err := c.ValidateRegion()
	if err != nil {
		errs = append(errs, err)
	}

	if len(errs) == 0 {
		// store AWS region in client struct, for region specific operations such as
		// bucket storage in S3
		client.region = c.Region

		log.Println("[INFO] Building AWS auth structure")
		creds := getCreds(c.AccessKey, c.SecretKey, c.Token)
		// Call Get to check for credential provider. If nothing found, we'll get an
		// error, and we can present it nicely to the user
		_, err = creds.Get()
		if err != nil {
			errs = append(errs, fmt.Errorf("Error loading credentials for AWS Provider: %s", err))
			return nil, &multierror.Error{Errors: errs}
		}
		awsConfig := &aws.Config{
			Credentials: creds,
			Region:      aws.String(c.Region),
			MaxRetries:  aws.Int(c.MaxRetries),
			HTTPClient:  cleanhttp.DefaultClient(),
		}

		log.Println("[INFO] Initializing IAM Connection")
		sess := session.New(awsConfig)
		client.iamconn = iam.New(sess)

		err = c.ValidateCredentials(client.iamconn)
		if err != nil {
			errs = append(errs, err)
		}

		// Some services exist only in us-east-1, e.g. because they manage
		// resources that can span across multiple regions, or because
		// signature format v4 requires region to be us-east-1 for global
		// endpoints:
		// http://docs.aws.amazon.com/general/latest/gr/sigv4_changes.html
		usEast1AwsConfig := &aws.Config{
			Credentials: creds,
			Region:      aws.String("us-east-1"),
			MaxRetries:  aws.Int(c.MaxRetries),
			HTTPClient:  cleanhttp.DefaultClient(),
		}
		usEast1Sess := session.New(usEast1AwsConfig)

		awsDynamoDBConfig := *awsConfig
		awsDynamoDBConfig.Endpoint = aws.String(c.DynamoDBEndpoint)

		log.Println("[INFO] Initializing DynamoDB connection")
		dynamoSess := session.New(&awsDynamoDBConfig)
		client.dynamodbconn = dynamodb.New(dynamoSess)

		log.Println("[INFO] Initializing ELB connection")
		client.elbconn = elb.New(sess)

		log.Println("[INFO] Initializing S3 connection")
		client.s3conn = s3.New(sess)

		log.Println("[INFO] Initializing SQS connection")
		client.sqsconn = sqs.New(sess)

		log.Println("[INFO] Initializing SNS connection")
		client.snsconn = sns.New(sess)

		log.Println("[INFO] Initializing RDS Connection")
		client.rdsconn = rds.New(sess)

		awsKinesisConfig := *awsConfig
		awsKinesisConfig.Endpoint = aws.String(c.KinesisEndpoint)

		log.Println("[INFO] Initializing Kinesis Connection")
		kinesisSess := session.New(&awsKinesisConfig)
		client.kinesisconn = kinesis.New(kinesisSess)

		authErr := c.ValidateAccountId(client.iamconn)
		if authErr != nil {
			errs = append(errs, authErr)
		}

		log.Println("[INFO] Initializing Kinesis Firehose Connection")
		client.firehoseconn = firehose.New(sess)

		log.Println("[INFO] Initializing AutoScaling connection")
		client.autoscalingconn = autoscaling.New(sess)

		log.Println("[INFO] Initializing EC2 Connection")
		client.ec2conn = ec2.New(sess)

		log.Println("[INFO] Initializing ECR Connection")
		client.ecrconn = ecr.New(sess)

		log.Println("[INFO] Initializing ECS Connection")
		client.ecsconn = ecs.New(sess)

		log.Println("[INFO] Initializing EFS Connection")
		client.efsconn = efs.New(sess)

		log.Println("[INFO] Initializing ElasticSearch Connection")
		client.esconn = elasticsearch.New(sess)

		log.Println("[INFO] Initializing Route 53 connection")
		client.r53conn = route53.New(usEast1Sess)

		log.Println("[INFO] Initializing Elasticache Connection")
		client.elasticacheconn = elasticache.New(sess)

		log.Println("[INFO] Initializing Lambda Connection")
		client.lambdaconn = lambda.New(sess)

		log.Println("[INFO] Initializing Cloudformation Connection")
		client.cfconn = cloudformation.New(sess)

		log.Println("[INFO] Initializing CloudWatch SDK connection")
		client.cloudwatchconn = cloudwatch.New(sess)

		log.Println("[INFO] Initializing CloudTrail connection")
		client.cloudtrailconn = cloudtrail.New(sess)

		log.Println("[INFO] Initializing CloudWatch Logs connection")
		client.cloudwatchlogsconn = cloudwatchlogs.New(sess)

		log.Println("[INFO] Initializing OpsWorks Connection")
		client.opsworksconn = opsworks.New(usEast1Sess)

		log.Println("[INFO] Initializing Directory Service connection")
		client.dsconn = directoryservice.New(sess)

		log.Println("[INFO] Initializing Glacier connection")
		client.glacierconn = glacier.New(sess)

		log.Println("[INFO] Initializing CodeDeploy Connection")
		client.codedeployconn = codedeploy.New(sess)

		log.Println("[INFO] Initializing CodeCommit SDK connection")
		client.codecommitconn = codecommit.New(usEast1Sess)

		log.Println("[INFO] Initializing Redshift SDK connection")
		client.redshiftconn = redshift.New(sess)

	}

	if len(errs) > 0 {
		return nil, &multierror.Error{Errors: errs}
	}

	return &client, nil
}
Пример #29
0
// Client configures and returns a fully initialized AWSClient
func (c *Config) Client() (interface{}, error) {
	// Get the auth and region. This can fail if keys/regions were not
	// specified and we're attempting to use the environment.
	log.Println("[INFO] Building AWS region structure")
	err := c.ValidateRegion()
	if err != nil {
		return nil, err
	}

	var client AWSClient
	// store AWS region in client struct, for region specific operations such as
	// bucket storage in S3
	client.region = c.Region

	log.Println("[INFO] Building AWS auth structure")
	creds, err := GetCredentials(c)
	if err != nil {
		return nil, err
	}
	// Call Get to check for credential provider. If nothing found, we'll get an
	// error, and we can present it nicely to the user
	cp, err := creds.Get()
	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok && awsErr.Code() == "NoCredentialProviders" {
			return nil, errors.New(`No valid credential sources found for AWS Provider.
  Please see https://terraform.io/docs/providers/aws/index.html for more information on
  providing credentials for the AWS Provider`)
		}

		return nil, fmt.Errorf("Error loading credentials for AWS Provider: %s", err)
	}

	log.Printf("[INFO] AWS Auth provider used: %q", cp.ProviderName)

	awsConfig := &aws.Config{
		Credentials:      creds,
		Region:           aws.String(c.Region),
		MaxRetries:       aws.Int(c.MaxRetries),
		HTTPClient:       cleanhttp.DefaultClient(),
		S3ForcePathStyle: aws.Bool(c.S3ForcePathStyle),
	}

	if logging.IsDebugOrHigher() {
		awsConfig.LogLevel = aws.LogLevel(aws.LogDebugWithHTTPBody)
		awsConfig.Logger = awsLogger{}
	}

	if c.Insecure {
		transport := awsConfig.HTTPClient.Transport.(*http.Transport)
		transport.TLSClientConfig = &tls.Config{
			InsecureSkipVerify: true,
		}
	}

	// Set up base session
	sess, err := session.NewSession(awsConfig)
	if err != nil {
		return nil, errwrap.Wrapf("Error creating AWS session: {{err}}", err)
	}

	// Removes the SDK Version handler, so we only have the provider User-Agent
	// Ex: "User-Agent: APN/1.0 HashiCorp/1.0 Terraform/0.7.9-dev"
	sess.Handlers.Build.Remove(request.NamedHandler{Name: "core.SDKVersionUserAgentHandler"})
	sess.Handlers.Build.PushFrontNamed(addTerraformVersionToUserAgent)

	if extraDebug := os.Getenv("TERRAFORM_AWS_AUTHFAILURE_DEBUG"); extraDebug != "" {
		sess.Handlers.UnmarshalError.PushFrontNamed(debugAuthFailure)
	}

	// Some services exist only in us-east-1, e.g. because they manage
	// resources that can span across multiple regions, or because
	// signature format v4 requires region to be us-east-1 for global
	// endpoints:
	// http://docs.aws.amazon.com/general/latest/gr/sigv4_changes.html
	usEast1Sess := sess.Copy(&aws.Config{Region: aws.String("us-east-1")})

	// Some services have user-configurable endpoints
	awsEc2Sess := sess.Copy(&aws.Config{Endpoint: aws.String(c.Ec2Endpoint)})
	awsElbSess := sess.Copy(&aws.Config{Endpoint: aws.String(c.ElbEndpoint)})
	awsIamSess := sess.Copy(&aws.Config{Endpoint: aws.String(c.IamEndpoint)})
	awsS3Sess := sess.Copy(&aws.Config{Endpoint: aws.String(c.S3Endpoint)})
	dynamoSess := sess.Copy(&aws.Config{Endpoint: aws.String(c.DynamoDBEndpoint)})
	kinesisSess := sess.Copy(&aws.Config{Endpoint: aws.String(c.KinesisEndpoint)})

	// These two services need to be set up early so we can check on AccountID
	client.iamconn = iam.New(awsIamSess)
	client.stsconn = sts.New(sess)

	if !c.SkipCredsValidation {
		err = c.ValidateCredentials(client.stsconn)
		if err != nil {
			return nil, err
		}
	}

	if !c.SkipRequestingAccountId {
		partition, accountId, err := GetAccountInfo(client.iamconn, client.stsconn, cp.ProviderName)
		if err == nil {
			client.partition = partition
			client.accountid = accountId
		}
	}

	authErr := c.ValidateAccountId(client.accountid)
	if authErr != nil {
		return nil, authErr
	}

	client.acmconn = acm.New(sess)
	client.apigateway = apigateway.New(sess)
	client.appautoscalingconn = applicationautoscaling.New(sess)
	client.autoscalingconn = autoscaling.New(sess)
	client.cfconn = cloudformation.New(sess)
	client.cloudfrontconn = cloudfront.New(sess)
	client.cloudtrailconn = cloudtrail.New(sess)
	client.cloudwatchconn = cloudwatch.New(sess)
	client.cloudwatcheventsconn = cloudwatchevents.New(sess)
	client.cloudwatchlogsconn = cloudwatchlogs.New(sess)
	client.codecommitconn = codecommit.New(usEast1Sess)
	client.codedeployconn = codedeploy.New(sess)
	client.dsconn = directoryservice.New(sess)
	client.dynamodbconn = dynamodb.New(dynamoSess)
	client.ec2conn = ec2.New(awsEc2Sess)
	client.ecrconn = ecr.New(sess)
	client.ecsconn = ecs.New(sess)
	client.efsconn = efs.New(sess)
	client.elasticacheconn = elasticache.New(sess)
	client.elasticbeanstalkconn = elasticbeanstalk.New(sess)
	client.elastictranscoderconn = elastictranscoder.New(sess)
	client.elbconn = elb.New(awsElbSess)
	client.elbv2conn = elbv2.New(awsElbSess)
	client.emrconn = emr.New(sess)
	client.esconn = elasticsearch.New(sess)
	client.firehoseconn = firehose.New(sess)
	client.glacierconn = glacier.New(sess)
	client.kinesisconn = kinesis.New(kinesisSess)
	client.kmsconn = kms.New(sess)
	client.lambdaconn = lambda.New(sess)
	client.lightsailconn = lightsail.New(usEast1Sess)
	client.opsworksconn = opsworks.New(usEast1Sess)
	client.r53conn = route53.New(usEast1Sess)
	client.rdsconn = rds.New(sess)
	client.redshiftconn = redshift.New(sess)
	client.simpledbconn = simpledb.New(sess)
	client.s3conn = s3.New(awsS3Sess)
	client.sesConn = ses.New(sess)
	client.snsconn = sns.New(sess)
	client.sqsconn = sqs.New(sess)
	client.ssmconn = ssm.New(sess)
	client.wafconn = waf.New(sess)

	return &client, nil
}
Пример #30
0
func init() {
	Before("@glacier", func() {
		World["client"] = glacier.New(nil)
	})
}