// btcdMain is the real main function for btcd. It is necessary to work around
// the fact that deferred functions do not run when os.Exit() is called. The
// optional serverChan parameter is mainly used by the service code to be
// notified with the server once it is setup so it can gracefully stop it when
// requested from the service control manager.
func btcdMain(serverChan chan<- *server) error {
// Load configuration and parse command line. This function also
// initializes logging and configures it accordingly.
tcfg, _, err := loadConfig()
if err != nil {
return err
}
cfg = tcfg
defer backendLog.Flush()
// Get a channel that will be closed when a shutdown signal has been
// triggered either from an OS signal such as SIGINT (Ctrl+C) or from
// another subsystem such as the RPC server.
interruptedChan := interruptListener()
defer btcdLog.Info("Shutdown complete")
// Show version at startup.
btcdLog.Infof("Version %s", version())
// Enable http profiling server if requested.
if cfg.Profile != "" {
go func() {
listenAddr := net.JoinHostPort("", cfg.Profile)
btcdLog.Infof("Profile server listening on %s", listenAddr)
profileRedirect := http.RedirectHandler("/debug/pprof",
http.StatusSeeOther)
http.Handle("/", profileRedirect)
btcdLog.Errorf("%v", http.ListenAndServe(listenAddr, nil))
}()
}
// Write cpu profile if requested.
if cfg.CPUProfile != "" {
f, err := os.Create(cfg.CPUProfile)
if err != nil {
btcdLog.Errorf("Unable to create cpu profile: %v", err)
return err
}
pprof.StartCPUProfile(f)
defer f.Close()
defer pprof.StopCPUProfile()
}
// Perform upgrades to btcd as new versions require it.
if err := doUpgrades(); err != nil {
btcdLog.Errorf("%v", err)
return err
}
// Return now if an interrupt signal was triggered.
if interruptRequested(interruptedChan) {
return nil
}
// Load the block database.
db, err := loadBlockDB()
if err != nil {
btcdLog.Errorf("%v", err)
return err
}
defer func() {
// Ensure the database is sync'd and closed on shutdown.
btcdLog.Infof("Gracefully shutting down the database...")
db.Close()
}()
// Return now if an interrupt signal was triggered.
if interruptRequested(interruptedChan) {
return nil
}
// Drop indexes and exit if requested.
//
// NOTE: The order is important here because dropping the tx index also
// drops the address index since it relies on it.
if cfg.DropAddrIndex {
if err := indexers.DropAddrIndex(db); err != nil {
btcdLog.Errorf("%v", err)
return err
}
return nil
}
if cfg.DropTxIndex {
if err := indexers.DropTxIndex(db); err != nil {
btcdLog.Errorf("%v", err)
return err
}
return nil
}
// Create server and start it.
server, err := newServer(cfg.Listeners, db, activeNetParams.Params)
if err != nil {
// TODO(oga) this logging could do with some beautifying.
btcdLog.Errorf("Unable to start server on %v: %v",
cfg.Listeners, err)
return err
}
defer func() {
btcdLog.Infof("Gracefully shutting down the server...")
server.Stop()
server.WaitForShutdown()
srvrLog.Infof("Server shutdown complete")
}()
server.Start()
if serverChan != nil {
serverChan <- server
}
// Wait until the interrupt signal is received from an OS signal or
// shutdown is requested through one of the subsystems such as the RPC
// server.
<-interruptedChan
return nil
}
// btcdMain is the real main function for btcd. It is necessary to work around
// the fact that deferred functions do not run when os.Exit() is called. The
// optional serverChan parameter is mainly used by the service code to be
// notified with the server once it is setup so it can gracefully stop it when
// requested from the service control manager.
func btcdMain(serverChan chan<- *server) error {
// Load configuration and parse command line. This function also
// initializes logging and configures it accordingly.
tcfg, _, err := loadConfig()
if err != nil {
return err
}
cfg = tcfg
defer backendLog.Flush()
// Show version at startup.
btcdLog.Infof("Version %s", version())
// Enable http profiling server if requested.
if cfg.Profile != "" {
go func() {
listenAddr := net.JoinHostPort("", cfg.Profile)
btcdLog.Infof("Profile server listening on %s", listenAddr)
profileRedirect := http.RedirectHandler("/debug/pprof",
http.StatusSeeOther)
http.Handle("/", profileRedirect)
btcdLog.Errorf("%v", http.ListenAndServe(listenAddr, nil))
}()
}
// Write cpu profile if requested.
if cfg.CPUProfile != "" {
f, err := os.Create(cfg.CPUProfile)
if err != nil {
btcdLog.Errorf("Unable to create cpu profile: %v", err)
return err
}
pprof.StartCPUProfile(f)
defer f.Close()
defer pprof.StopCPUProfile()
}
// Perform upgrades to btcd as new versions require it.
if err := doUpgrades(); err != nil {
btcdLog.Errorf("%v", err)
return err
}
// Load the block database.
db, err := loadBlockDB()
if err != nil {
btcdLog.Errorf("%v", err)
return err
}
defer db.Close()
// Ensure the database is sync'd and closed on Ctrl+C.
addInterruptHandler(func() {
btcdLog.Infof("Gracefully shutting down the database...")
db.Close()
})
// Drop indexes and exit if requested.
//
// NOTE: The order is important here because dropping the tx index also
// drops the address index since it relies on it.
if cfg.DropAddrIndex {
if err := indexers.DropAddrIndex(db); err != nil {
btcdLog.Errorf("%v", err)
return err
}
return nil
}
if cfg.DropTxIndex {
if err := indexers.DropTxIndex(db); err != nil {
btcdLog.Errorf("%v", err)
return err
}
return nil
}
// Create server and start it.
server, err := newServer(cfg.Listeners, db, activeNetParams.Params)
if err != nil {
// TODO(oga) this logging could do with some beautifying.
btcdLog.Errorf("Unable to start server on %v: %v",
cfg.Listeners, err)
return err
}
addInterruptHandler(func() {
btcdLog.Infof("Gracefully shutting down the server...")
server.Stop()
server.WaitForShutdown()
})
server.Start()
if serverChan != nil {
serverChan <- server
}
// Monitor for graceful server shutdown and signal the main goroutine
// when done. This is done in a separate goroutine rather than waiting
// directly so the main goroutine can be signaled for shutdown by either
// a graceful shutdown or from the main interrupt handler. This is
// necessary since the main goroutine must be kept running long enough
// for the interrupt handler goroutine to finish.
go func() {
server.WaitForShutdown()
srvrLog.Infof("Server shutdown complete")
shutdownChannel <- struct{}{}
}()
// Wait for shutdown signal from either a graceful server stop or from
// the interrupt handler.
<-shutdownChannel
btcdLog.Info("Shutdown complete")
return nil
}