func runRun(dockerCli *client.DockerCli, flags *pflag.FlagSet, opts *runOptions, copts *runconfigopts.ContainerOptions) error {
stdout, stderr, stdin := dockerCli.Out(), dockerCli.Err(), dockerCli.In()
client := dockerCli.Client()
// TODO: pass this as an argument
cmdPath := "run"
var (
flAttach *opttypes.ListOpts
ErrConflictAttachDetach = fmt.Errorf("Conflicting options: -a and -d")
ErrConflictRestartPolicyAndAutoRemove = fmt.Errorf("Conflicting options: --restart and --rm")
ErrConflictDetachAutoRemove = fmt.Errorf("Conflicting options: --rm and -d")
)
config, hostConfig, networkingConfig, err := runconfigopts.Parse(flags, copts)
// just in case the Parse does not exit
if err != nil {
reportError(stderr, cmdPath, err.Error(), true)
return cli.StatusError{StatusCode: 125}
}
if hostConfig.OomKillDisable != nil && *hostConfig.OomKillDisable && hostConfig.Memory == 0 {
fmt.Fprintf(stderr, "WARNING: Disabling the OOM killer on containers without setting a '-m/--memory' limit may be dangerous.\n")
}
if len(hostConfig.DNS) > 0 {
// check the DNS settings passed via --dns against
// localhost regexp to warn if they are trying to
// set a DNS to a localhost address
for _, dnsIP := range hostConfig.DNS {
if dns.IsLocalhost(dnsIP) {
fmt.Fprintf(stderr, "WARNING: Localhost DNS setting (--dns=%s) may fail in containers.\n", dnsIP)
break
}
}
}
config.ArgsEscaped = false
if !opts.detach {
if err := dockerCli.CheckTtyInput(config.AttachStdin, config.Tty); err != nil {
return err
}
} else {
if fl := flags.Lookup("attach"); fl != nil {
flAttach = fl.Value.(*opttypes.ListOpts)
if flAttach.Len() != 0 {
return ErrConflictAttachDetach
}
}
if opts.autoRemove {
return ErrConflictDetachAutoRemove
}
config.AttachStdin = false
config.AttachStdout = false
config.AttachStderr = false
config.StdinOnce = false
}
// Disable sigProxy when in TTY mode
if config.Tty {
opts.sigProxy = false
}
// Telling the Windows daemon the initial size of the tty during start makes
// a far better user experience rather than relying on subsequent resizes
// to cause things to catch up.
if runtime.GOOS == "windows" {
hostConfig.ConsoleSize[0], hostConfig.ConsoleSize[1] = dockerCli.GetTtySize()
}
ctx, cancelFun := context.WithCancel(context.Background())
createResponse, err := createContainer(ctx, dockerCli, config, hostConfig, networkingConfig, hostConfig.ContainerIDFile, opts.name)
if err != nil {
reportError(stderr, cmdPath, err.Error(), true)
return runStartContainerErr(err)
}
if opts.sigProxy {
sigc := dockerCli.ForwardAllSignals(ctx, createResponse.ID)
defer signal.StopCatch(sigc)
}
var (
waitDisplayID chan struct{}
errCh chan error
)
if !config.AttachStdout && !config.AttachStderr {
// Make this asynchronous to allow the client to write to stdin before having to read the ID
waitDisplayID = make(chan struct{})
go func() {
defer close(waitDisplayID)
fmt.Fprintf(stdout, "%s\n", createResponse.ID)
}()
}
if opts.autoRemove && (hostConfig.RestartPolicy.IsAlways() || hostConfig.RestartPolicy.IsOnFailure()) {
return ErrConflictRestartPolicyAndAutoRemove
}
attach := config.AttachStdin || config.AttachStdout || config.AttachStderr
if attach {
var (
out, cerr io.Writer
in io.ReadCloser
)
if config.AttachStdin {
in = stdin
}
if config.AttachStdout {
out = stdout
}
if config.AttachStderr {
if config.Tty {
cerr = stdout
} else {
cerr = stderr
}
}
if opts.detachKeys != "" {
dockerCli.ConfigFile().DetachKeys = opts.detachKeys
}
options := types.ContainerAttachOptions{
Stream: true,
Stdin: config.AttachStdin,
Stdout: config.AttachStdout,
Stderr: config.AttachStderr,
DetachKeys: dockerCli.ConfigFile().DetachKeys,
}
resp, errAttach := client.ContainerAttach(ctx, createResponse.ID, options)
if errAttach != nil && errAttach != httputil.ErrPersistEOF {
// ContainerAttach returns an ErrPersistEOF (connection closed)
// means server met an error and put it in Hijacked connection
// keep the error and read detailed error message from hijacked connection later
return errAttach
}
defer resp.Close()
errCh = promise.Go(func() error {
errHijack := dockerCli.HoldHijackedConnection(ctx, config.Tty, in, out, cerr, resp)
if errHijack == nil {
return errAttach
}
return errHijack
})
}
if opts.autoRemove {
defer func() {
// Explicitly not sharing the context as it could be "Done" (by calling cancelFun)
// and thus the container would not be removed.
if err := removeContainer(dockerCli, context.Background(), createResponse.ID, true, false, true); err != nil {
fmt.Fprintf(stderr, "%v\n", err)
}
}()
}
//start the container
if err := client.ContainerStart(ctx, createResponse.ID, types.ContainerStartOptions{}); err != nil {
// If we have holdHijackedConnection, we should notify
// holdHijackedConnection we are going to exit and wait
// to avoid the terminal are not restored.
if attach {
cancelFun()
<-errCh
}
reportError(stderr, cmdPath, err.Error(), false)
return runStartContainerErr(err)
}
if (config.AttachStdin || config.AttachStdout || config.AttachStderr) && config.Tty && dockerCli.IsTerminalOut() {
if err := dockerCli.MonitorTtySize(ctx, createResponse.ID, false); err != nil {
fmt.Fprintf(stderr, "Error monitoring TTY size: %s\n", err)
}
}
if errCh != nil {
if err := <-errCh; err != nil {
logrus.Debugf("Error hijack: %s", err)
return err
}
}
// Detached mode: wait for the id to be displayed and return.
if !config.AttachStdout && !config.AttachStderr {
// Detached mode
<-waitDisplayID
return nil
}
var status int
// Attached mode
if opts.autoRemove {
// Autoremove: wait for the container to finish, retrieve
// the exit code and remove the container
if status, err = client.ContainerWait(ctx, createResponse.ID); err != nil {
return runStartContainerErr(err)
}
if _, status, err = dockerCli.GetExitCode(ctx, createResponse.ID); err != nil {
return err
}
} else {
// No Autoremove: Simply retrieve the exit code
if !config.Tty {
// In non-TTY mode, we can't detach, so we must wait for container exit
if status, err = client.ContainerWait(ctx, createResponse.ID); err != nil {
return err
}
} else {
// In TTY mode, there is a race: if the process dies too slowly, the state could
// be updated after the getExitCode call and result in the wrong exit code being reported
if _, status, err = dockerCli.GetExitCode(ctx, createResponse.ID); err != nil {
return err
}
}
}
if status != 0 {
return cli.StatusError{StatusCode: status}
}
return nil
}
func runAttach(dockerCli *client.DockerCli, opts *attachOptions) error {
ctx := context.Background()
c, err := dockerCli.Client().ContainerInspect(ctx, opts.container)
if err != nil {
return err
}
if !c.State.Running {
return fmt.Errorf("You cannot attach to a stopped container, start it first")
}
if c.State.Paused {
return fmt.Errorf("You cannot attach to a paused container, unpause it first")
}
if err := dockerCli.CheckTtyInput(!opts.noStdin, c.Config.Tty); err != nil {
return err
}
if opts.detachKeys != "" {
dockerCli.ConfigFile().DetachKeys = opts.detachKeys
}
options := types.ContainerAttachOptions{
Stream: true,
Stdin: !opts.noStdin && c.Config.OpenStdin,
Stdout: true,
Stderr: true,
DetachKeys: dockerCli.ConfigFile().DetachKeys,
}
var in io.ReadCloser
if options.Stdin {
in = dockerCli.In()
}
if opts.proxy && !c.Config.Tty {
sigc := dockerCli.ForwardAllSignals(ctx, opts.container)
defer signal.StopCatch(sigc)
}
resp, errAttach := dockerCli.Client().ContainerAttach(ctx, opts.container, options)
if errAttach != nil && errAttach != httputil.ErrPersistEOF {
// ContainerAttach returns an ErrPersistEOF (connection closed)
// means server met an error and put it in Hijacked connection
// keep the error and read detailed error message from hijacked connection later
return errAttach
}
defer resp.Close()
if c.Config.Tty && dockerCli.IsTerminalOut() {
height, width := dockerCli.GetTtySize()
// To handle the case where a user repeatedly attaches/detaches without resizing their
// terminal, the only way to get the shell prompt to display for attaches 2+ is to artificially
// resize it, then go back to normal. Without this, every attach after the first will
// require the user to manually resize or hit enter.
dockerCli.ResizeTtyTo(ctx, opts.container, height+1, width+1, false)
// After the above resizing occurs, the call to MonitorTtySize below will handle resetting back
// to the actual size.
if err := dockerCli.MonitorTtySize(ctx, opts.container, false); err != nil {
logrus.Debugf("Error monitoring TTY size: %s", err)
}
}
if err := dockerCli.HoldHijackedConnection(ctx, c.Config.Tty, in, dockerCli.Out(), dockerCli.Err(), resp); err != nil {
return err
}
if errAttach != nil {
return errAttach
}
_, status, err := dockerCli.GetExitCode(ctx, opts.container)
if err != nil {
return err
}
if status != 0 {
return cli.StatusError{StatusCode: status}
}
return nil
}
func runStart(dockerCli *client.DockerCli, opts *startOptions) error {
ctx, cancelFun := context.WithCancel(context.Background())
if opts.attach || opts.openStdin {
// We're going to attach to a container.
// 1. Ensure we only have one container.
if len(opts.containers) > 1 {
return fmt.Errorf("You cannot start and attach multiple containers at once.")
}
// 2. Attach to the container.
container := opts.containers[0]
c, err := dockerCli.Client().ContainerInspect(ctx, container)
if err != nil {
return err
}
if !c.Config.Tty {
sigc := dockerCli.ForwardAllSignals(ctx, container)
defer signal.StopCatch(sigc)
}
if opts.detachKeys != "" {
dockerCli.ConfigFile().DetachKeys = opts.detachKeys
}
options := types.ContainerAttachOptions{
Stream: true,
Stdin: opts.openStdin && c.Config.OpenStdin,
Stdout: true,
Stderr: true,
DetachKeys: dockerCli.ConfigFile().DetachKeys,
}
var in io.ReadCloser
if options.Stdin {
in = dockerCli.In()
}
resp, errAttach := dockerCli.Client().ContainerAttach(ctx, container, options)
if errAttach != nil && errAttach != httputil.ErrPersistEOF {
// ContainerAttach return an ErrPersistEOF (connection closed)
// means server met an error and put it in Hijacked connection
// keep the error and read detailed error message from hijacked connection
return errAttach
}
defer resp.Close()
cErr := promise.Go(func() error {
errHijack := dockerCli.HoldHijackedConnection(ctx, c.Config.Tty, in, dockerCli.Out(), dockerCli.Err(), resp)
if errHijack == nil {
return errAttach
}
return errHijack
})
// 3. Start the container.
if err := dockerCli.Client().ContainerStart(ctx, container, types.ContainerStartOptions{}); err != nil {
cancelFun()
<-cErr
return err
}
// 4. Wait for attachment to break.
if c.Config.Tty && dockerCli.IsTerminalOut() {
if err := dockerCli.MonitorTtySize(ctx, container, false); err != nil {
fmt.Fprintf(dockerCli.Err(), "Error monitoring TTY size: %s\n", err)
}
}
if attchErr := <-cErr; attchErr != nil {
return attchErr
}
_, status, err := dockerCli.GetExitCode(ctx, container)
if err != nil {
return err
}
if status != 0 {
return cli.StatusError{StatusCode: status}
}
} else {
// We're not going to attach to anything.
// Start as many containers as we want.
return startContainersWithoutAttachments(dockerCli, ctx, opts.containers)
}
return nil
}