// Reads a Dockerfile from the current context. It assumes that the
// 'filename' is a relative path from the root of the context
func (b *Builder) readDockerfile(origFile string) error {
filename, err := symlink.FollowSymlinkInScope(filepath.Join(b.contextPath, origFile), b.contextPath)
if err != nil {
return fmt.Errorf("The Dockerfile (%s) must be within the build context", origFile)
}
fi, err := os.Lstat(filename)
if os.IsNotExist(err) {
return fmt.Errorf("Cannot locate specified Dockerfile: %s", origFile)
}
if fi.Size() == 0 {
return ErrDockerfileEmpty
}
f, err := os.Open(filename)
if err != nil {
return err
}
b.dockerfile, err = parser.Parse(f)
f.Close()
if err != nil {
return err
}
// After the Dockerfile has been parsed, we need to check the .dockerignore
// file for either "Dockerfile" or ".dockerignore", and if either are
// present then erase them from the build context. These files should never
// have been sent from the client but we did send them to make sure that
// we had the Dockerfile to actually parse, and then we also need the
// .dockerignore file to know whether either file should be removed.
// Note that this assumes the Dockerfile has been read into memory and
// is now safe to be removed.
excludes, _ := utils.ReadDockerIgnore(filepath.Join(b.contextPath, ".dockerignore"))
if rm, _ := fileutils.Matches(".dockerignore", excludes); rm == true {
os.Remove(filepath.Join(b.contextPath, ".dockerignore"))
b.context.(tarsum.BuilderContext).Remove(".dockerignore")
}
if rm, _ := fileutils.Matches(b.dockerfileName, excludes); rm == true {
os.Remove(filepath.Join(b.contextPath, b.dockerfileName))
b.context.(tarsum.BuilderContext).Remove(b.dockerfileName)
}
return nil
}
// Process reads the .dockerignore file at the root of the embedded context.
// If .dockerignore does not exist in the context, then nil is returned.
//
// It can take a list of files to be removed after .dockerignore is removed.
// This is used for server-side implementations of builders that need to send
// the .dockerignore file as well as the special files specified in filesToRemove,
// but expect them to be excluded from the context after they were processed.
//
// For example, server-side Dockerfile builders are expected to pass in the name
// of the Dockerfile to be removed after it was parsed.
//
// TODO: Don't require a ModifiableContext (use Context instead) and don't remove
// files, instead handle a list of files to be excluded from the context.
func (c DockerIgnoreContext) Process(filesToRemove []string) error {
dockerignore, err := c.Open(".dockerignore")
// Note that a missing .dockerignore file isn't treated as an error
if err != nil {
if os.IsNotExist(err) {
return nil
}
return err
}
excludes, _ := utils.ReadDockerIgnore(dockerignore)
filesToRemove = append([]string{".dockerignore"}, filesToRemove...)
for _, fileToRemove := range filesToRemove {
rm, _ := fileutils.Matches(fileToRemove, excludes)
if rm {
c.Remove(fileToRemove)
}
}
return nil
}
// Reads a Dockerfile from the current context. It assumes that the
// 'filename' is a relative path from the root of the context
func (b *builder) readDockerfile() error {
// If no -f was specified then look for 'Dockerfile'. If we can't find
// that then look for 'dockerfile'. If neither are found then default
// back to 'Dockerfile' and use that in the error message.
if b.dockerfileName == "" {
b.dockerfileName = api.DefaultDockerfileName
tmpFN := filepath.Join(b.contextPath, api.DefaultDockerfileName)
if _, err := os.Lstat(tmpFN); err != nil {
tmpFN = filepath.Join(b.contextPath, strings.ToLower(api.DefaultDockerfileName))
if _, err := os.Lstat(tmpFN); err == nil {
b.dockerfileName = strings.ToLower(api.DefaultDockerfileName)
}
}
}
origFile := b.dockerfileName
filename, err := symlink.FollowSymlinkInScope(filepath.Join(b.contextPath, origFile), b.contextPath)
if err != nil {
return fmt.Errorf("The Dockerfile (%s) must be within the build context", origFile)
}
fi, err := os.Lstat(filename)
if os.IsNotExist(err) {
return fmt.Errorf("Cannot locate specified Dockerfile: %s", origFile)
}
if fi.Size() == 0 {
return fmt.Errorf("The Dockerfile (%s) cannot be empty", origFile)
}
f, err := os.Open(filename)
if err != nil {
return err
}
b.dockerfile, err = parser.Parse(f)
f.Close()
if err != nil {
return err
}
// After the Dockerfile has been parsed, we need to check the .dockerignore
// file for either "Dockerfile" or ".dockerignore", and if either are
// present then erase them from the build context. These files should never
// have been sent from the client but we did send them to make sure that
// we had the Dockerfile to actually parse, and then we also need the
// .dockerignore file to know whether either file should be removed.
// Note that this assumes the Dockerfile has been read into memory and
// is now safe to be removed.
excludes, _ := utils.ReadDockerIgnore(filepath.Join(b.contextPath, ".dockerignore"))
if rm, _ := fileutils.Matches(".dockerignore", excludes); rm == true {
os.Remove(filepath.Join(b.contextPath, ".dockerignore"))
b.context.(tarsum.BuilderContext).Remove(".dockerignore")
}
if rm, _ := fileutils.Matches(b.dockerfileName, excludes); rm == true {
os.Remove(filepath.Join(b.contextPath, b.dockerfileName))
b.context.(tarsum.BuilderContext).Remove(b.dockerfileName)
}
return nil
}
// CmdBuild builds a new image from the source code at a given path.
//
// If '-' is provided instead of a path or URL, Docker will build an image from either a Dockerfile or tar archive read from STDIN.
//
// Usage: docker build [OPTIONS] PATH | URL | -
func (cli *DockerCli) CmdBuild(args ...string) error {
cmd := cli.Subcmd("build", "PATH | URL | -", "Build a new image from the source code at PATH", true)
tag := cmd.String([]string{"t", "-tag"}, "", "Repository name (and optionally a tag) for the image")
suppressOutput := cmd.Bool([]string{"q", "-quiet"}, false, "Suppress the verbose output generated by the containers")
noCache := cmd.Bool([]string{"#no-cache", "-no-cache"}, false, "Do not use cache when building the image")
rm := cmd.Bool([]string{"#rm", "-rm"}, true, "Remove intermediate containers after a successful build")
forceRm := cmd.Bool([]string{"-force-rm"}, false, "Always remove intermediate containers")
pull := cmd.Bool([]string{"-pull"}, false, "Always attempt to pull a newer version of the image")
dockerfileName := cmd.String([]string{"f", "-file"}, "", "Name of the Dockerfile (Default is 'PATH/Dockerfile')")
flMemoryString := cmd.String([]string{"m", "-memory"}, "", "Memory limit")
flMemorySwap := cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
flCPUShares := cmd.Int64([]string{"c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
flCpuQuota := cmd.Int64([]string{"-cpu-quota"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) quota")
flCPUSetCpus := cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
flCPUSetMems := cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
flCgroupParent := cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
cmd.Require(flag.Exact, 1)
cmd.ParseFlags(args, true)
var (
context archive.Archive
isRemote bool
err error
)
_, err = exec.LookPath("git")
hasGit := err == nil
if cmd.Arg(0) == "-" {
// As a special case, 'docker build -' will build from either an empty context with the
// contents of stdin as a Dockerfile, or a tar-ed context from stdin.
buf := bufio.NewReader(cli.in)
magic, err := buf.Peek(tarHeaderSize)
if err != nil && err != io.EOF {
return fmt.Errorf("failed to peek context header from STDIN: %v", err)
}
if !archive.IsArchive(magic) {
dockerfile, err := ioutil.ReadAll(buf)
if err != nil {
return fmt.Errorf("failed to read Dockerfile from STDIN: %v", err)
}
// -f option has no meaning when we're reading it from stdin,
// so just use our default Dockerfile name
*dockerfileName = api.DefaultDockerfileName
context, err = archive.Generate(*dockerfileName, string(dockerfile))
} else {
context = ioutil.NopCloser(buf)
}
} else if urlutil.IsURL(cmd.Arg(0)) && (!urlutil.IsGitURL(cmd.Arg(0)) || !hasGit) {
isRemote = true
} else {
root := cmd.Arg(0)
if urlutil.IsGitURL(root) {
root, err = utils.GitClone(root)
if err != nil {
return err
}
defer os.RemoveAll(root)
}
if _, err := os.Stat(root); err != nil {
return err
}
absRoot, err := filepath.Abs(root)
if err != nil {
return err
}
filename := *dockerfileName // path to Dockerfile
if *dockerfileName == "" {
// No -f/--file was specified so use the default
*dockerfileName = api.DefaultDockerfileName
filename = filepath.Join(absRoot, *dockerfileName)
// Just to be nice ;-) look for 'dockerfile' too but only
// use it if we found it, otherwise ignore this check
if _, err = os.Lstat(filename); os.IsNotExist(err) {
tmpFN := path.Join(absRoot, strings.ToLower(*dockerfileName))
if _, err = os.Lstat(tmpFN); err == nil {
*dockerfileName = strings.ToLower(*dockerfileName)
filename = tmpFN
}
}
}
origDockerfile := *dockerfileName // used for error msg
if filename, err = filepath.Abs(filename); err != nil {
return err
}
// Verify that 'filename' is within the build context
filename, err = symlink.FollowSymlinkInScope(filename, absRoot)
if err != nil {
return fmt.Errorf("The Dockerfile (%s) must be within the build context (%s)", origDockerfile, root)
}
// Now reset the dockerfileName to be relative to the build context
*dockerfileName, err = filepath.Rel(absRoot, filename)
if err != nil {
return err
}
// And canonicalize dockerfile name to a platform-independent one
*dockerfileName, err = archive.CanonicalTarNameForPath(*dockerfileName)
if err != nil {
return fmt.Errorf("Cannot canonicalize dockerfile path %s: %v", *dockerfileName, err)
}
if _, err = os.Lstat(filename); os.IsNotExist(err) {
return fmt.Errorf("Cannot locate Dockerfile: %s", origDockerfile)
}
var includes = []string{"."}
excludes, err := utils.ReadDockerIgnore(path.Join(root, ".dockerignore"))
if err != nil {
return err
}
// If .dockerignore mentions .dockerignore or the Dockerfile
// then make sure we send both files over to the daemon
// because Dockerfile is, obviously, needed no matter what, and
// .dockerignore is needed to know if either one needs to be
// removed. The deamon will remove them for us, if needed, after it
// parses the Dockerfile.
keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
keepThem2, _ := fileutils.Matches(*dockerfileName, excludes)
if keepThem1 || keepThem2 {
includes = append(includes, ".dockerignore", *dockerfileName)
}
if err := utils.ValidateContextDirectory(root, excludes); err != nil {
return fmt.Errorf("Error checking context is accessible: '%s'. Please check permissions and try again.", err)
}
options := &archive.TarOptions{
Compression: archive.Uncompressed,
ExcludePatterns: excludes,
IncludeFiles: includes,
}
context, err = archive.TarWithOptions(root, options)
if err != nil {
return err
}
}
// windows: show error message about modified file permissions
// FIXME: this is not a valid warning when the daemon is running windows. should be removed once docker engine for windows can build.
if runtime.GOOS == "windows" {
logrus.Warn(`SECURITY WARNING: You are building a Docker image from Windows against a Linux Docker host. All files and directories added to build context will have '-rwxr-xr-x' permissions. It is recommended to double check and reset permissions for sensitive files and directories.`)
}
var body io.Reader
// Setup an upload progress bar
// FIXME: ProgressReader shouldn't be this annoying to use
if context != nil {
sf := streamformatter.NewStreamFormatter(false)
body = progressreader.New(progressreader.Config{
In: context,
Out: cli.out,
Formatter: sf,
NewLines: true,
ID: "",
Action: "Sending build context to Docker daemon",
})
}
var memory int64
if *flMemoryString != "" {
parsedMemory, err := units.RAMInBytes(*flMemoryString)
if err != nil {
return err
}
memory = parsedMemory
}
var memorySwap int64
if *flMemorySwap != "" {
if *flMemorySwap == "-1" {
memorySwap = -1
} else {
parsedMemorySwap, err := units.RAMInBytes(*flMemorySwap)
if err != nil {
return err
}
memorySwap = parsedMemorySwap
}
}
// Send the build context
v := &url.Values{}
//Check if the given image name can be resolved
if *tag != "" {
repository, tag := parsers.ParseRepositoryTag(*tag)
if err := registry.ValidateRepositoryName(repository); err != nil {
return err
}
if len(tag) > 0 {
if err := graph.ValidateTagName(tag); err != nil {
return err
}
}
}
v.Set("t", *tag)
if *suppressOutput {
v.Set("q", "1")
}
if isRemote {
v.Set("remote", cmd.Arg(0))
}
if *noCache {
v.Set("nocache", "1")
}
if *rm {
v.Set("rm", "1")
} else {
v.Set("rm", "0")
}
if *forceRm {
v.Set("forcerm", "1")
}
if *pull {
v.Set("pull", "1")
}
v.Set("cpusetcpus", *flCPUSetCpus)
v.Set("cpusetmems", *flCPUSetMems)
v.Set("cpushares", strconv.FormatInt(*flCPUShares, 10))
v.Set("cpuquota", strconv.FormatInt(*flCpuQuota, 10))
v.Set("memory", strconv.FormatInt(memory, 10))
v.Set("memswap", strconv.FormatInt(memorySwap, 10))
v.Set("cgroupparent", *flCgroupParent)
v.Set("dockerfile", *dockerfileName)
headers := http.Header(make(map[string][]string))
buf, err := json.Marshal(cli.configFile.AuthConfigs)
if err != nil {
return err
}
headers.Add("X-Registry-Config", base64.URLEncoding.EncodeToString(buf))
if context != nil {
headers.Set("Content-Type", "application/tar")
}
sopts := &streamOpts{
rawTerminal: true,
in: body,
out: cli.out,
headers: headers,
}
err = cli.stream("POST", fmt.Sprintf("/build?%s", v.Encode()), sopts)
if jerr, ok := err.(*jsonmessage.JSONError); ok {
// If no error code is set, default to 1
if jerr.Code == 0 {
jerr.Code = 1
}
return StatusError{Status: jerr.Message, StatusCode: jerr.Code}
}
return err
}
// CmdBuild builds a new image from the source code at a given path.
//
// If '-' is provided instead of a path or URL, Docker will build an image from either a Dockerfile or tar archive read from STDIN.
//
// Usage: docker build [OPTIONS] PATH | URL | -
func (cli *DockerCli) CmdBuild(args ...string) error {
cmd := Cli.Subcmd("build", []string{"PATH | URL | -"}, Cli.DockerCommands["build"].Description, true)
flTags := opts.NewListOpts(validateTag)
cmd.Var(&flTags, []string{"t", "-tag"}, "Name and optionally a tag in the 'name:tag' format")
suppressOutput := cmd.Bool([]string{"q", "-quiet"}, false, "Suppress the verbose output generated by the containers")
noCache := cmd.Bool([]string{"#no-cache", "-no-cache"}, false, "Do not use cache when building the image")
rm := cmd.Bool([]string{"#rm", "-rm"}, true, "Remove intermediate containers after a successful build")
forceRm := cmd.Bool([]string{"-force-rm"}, false, "Always remove intermediate containers")
pull := cmd.Bool([]string{"-pull"}, false, "Always attempt to pull a newer version of the image")
dockerfileName := cmd.String([]string{"f", "-file"}, "", "Name of the Dockerfile (Default is 'PATH/Dockerfile')")
flMemoryString := cmd.String([]string{"m", "-memory"}, "", "Memory limit")
flMemorySwap := cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
flCPUShares := cmd.Int64([]string{"#c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
flCPUPeriod := cmd.Int64([]string{"-cpu-period"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) period")
flCPUQuota := cmd.Int64([]string{"-cpu-quota"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) quota")
flCPUSetCpus := cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
flCPUSetMems := cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
flCgroupParent := cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
flBuildArg := opts.NewListOpts(opts.ValidateEnv)
cmd.Var(&flBuildArg, []string{"-build-arg"}, "Set build-time variables")
ulimits := make(map[string]*ulimit.Ulimit)
flUlimits := opts.NewUlimitOpt(&ulimits)
cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")
cmd.Require(flag.Exact, 1)
// For trusted pull on "FROM <image>" instruction.
addTrustedFlags(cmd, true)
cmd.ParseFlags(args, true)
var (
context io.ReadCloser
isRemote bool
err error
)
_, err = exec.LookPath("git")
hasGit := err == nil
specifiedContext := cmd.Arg(0)
var (
contextDir string
tempDir string
relDockerfile string
)
switch {
case specifiedContext == "-":
tempDir, relDockerfile, err = getContextFromReader(cli.in, *dockerfileName)
case urlutil.IsGitURL(specifiedContext) && hasGit:
tempDir, relDockerfile, err = getContextFromGitURL(specifiedContext, *dockerfileName)
case urlutil.IsURL(specifiedContext):
tempDir, relDockerfile, err = getContextFromURL(cli.out, specifiedContext, *dockerfileName)
default:
contextDir, relDockerfile, err = getContextFromLocalDir(specifiedContext, *dockerfileName)
}
if err != nil {
return fmt.Errorf("unable to prepare context: %s", err)
}
if tempDir != "" {
defer os.RemoveAll(tempDir)
contextDir = tempDir
}
// Resolve the FROM lines in the Dockerfile to trusted digest references
// using Notary. On a successful build, we must tag the resolved digests
// to the original name specified in the Dockerfile.
newDockerfile, resolvedTags, err := rewriteDockerfileFrom(filepath.Join(contextDir, relDockerfile), cli.trustedReference)
if err != nil {
return fmt.Errorf("unable to process Dockerfile: %v", err)
}
defer newDockerfile.Close()
// And canonicalize dockerfile name to a platform-independent one
relDockerfile, err = archive.CanonicalTarNameForPath(relDockerfile)
if err != nil {
return fmt.Errorf("cannot canonicalize dockerfile path %s: %v", relDockerfile, err)
}
f, err := os.Open(filepath.Join(contextDir, ".dockerignore"))
if err != nil && !os.IsNotExist(err) {
return err
}
var excludes []string
if err == nil {
excludes, err = utils.ReadDockerIgnore(f)
if err != nil {
return err
}
}
if err := utils.ValidateContextDirectory(contextDir, excludes); err != nil {
return fmt.Errorf("Error checking context: '%s'.", err)
}
// If .dockerignore mentions .dockerignore or the Dockerfile
// then make sure we send both files over to the daemon
// because Dockerfile is, obviously, needed no matter what, and
// .dockerignore is needed to know if either one needs to be
// removed. The deamon will remove them for us, if needed, after it
// parses the Dockerfile. Ignore errors here, as they will have been
// caught by ValidateContextDirectory above.
var includes = []string{"."}
keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
keepThem2, _ := fileutils.Matches(relDockerfile, excludes)
if keepThem1 || keepThem2 {
includes = append(includes, ".dockerignore", relDockerfile)
}
context, err = archive.TarWithOptions(contextDir, &archive.TarOptions{
Compression: archive.Uncompressed,
ExcludePatterns: excludes,
IncludeFiles: includes,
})
if err != nil {
return err
}
// Wrap the tar archive to replace the Dockerfile entry with the rewritten
// Dockerfile which uses trusted pulls.
context = replaceDockerfileTarWrapper(context, newDockerfile, relDockerfile)
// Setup an upload progress bar
// FIXME: ProgressReader shouldn't be this annoying to use
sf := streamformatter.NewStreamFormatter()
var body io.Reader = progressreader.New(progressreader.Config{
In: context,
Out: cli.out,
Formatter: sf,
NewLines: true,
ID: "",
Action: "Sending build context to Docker daemon",
})
var memory int64
if *flMemoryString != "" {
parsedMemory, err := units.RAMInBytes(*flMemoryString)
if err != nil {
return err
}
memory = parsedMemory
}
var memorySwap int64
if *flMemorySwap != "" {
if *flMemorySwap == "-1" {
memorySwap = -1
} else {
parsedMemorySwap, err := units.RAMInBytes(*flMemorySwap)
if err != nil {
return err
}
memorySwap = parsedMemorySwap
}
}
// Send the build context
v := url.Values{
"t": flTags.GetAll(),
}
if *suppressOutput {
v.Set("q", "1")
}
if isRemote {
v.Set("remote", cmd.Arg(0))
}
if *noCache {
v.Set("nocache", "1")
}
if *rm {
v.Set("rm", "1")
} else {
v.Set("rm", "0")
}
if *forceRm {
v.Set("forcerm", "1")
}
if *pull {
v.Set("pull", "1")
}
v.Set("cpusetcpus", *flCPUSetCpus)
v.Set("cpusetmems", *flCPUSetMems)
v.Set("cpushares", strconv.FormatInt(*flCPUShares, 10))
v.Set("cpuquota", strconv.FormatInt(*flCPUQuota, 10))
v.Set("cpuperiod", strconv.FormatInt(*flCPUPeriod, 10))
v.Set("memory", strconv.FormatInt(memory, 10))
v.Set("memswap", strconv.FormatInt(memorySwap, 10))
v.Set("cgroupparent", *flCgroupParent)
v.Set("dockerfile", relDockerfile)
ulimitsVar := flUlimits.GetList()
ulimitsJSON, err := json.Marshal(ulimitsVar)
if err != nil {
return err
}
v.Set("ulimits", string(ulimitsJSON))
// collect all the build-time environment variables for the container
buildArgs := runconfig.ConvertKVStringsToMap(flBuildArg.GetAll())
buildArgsJSON, err := json.Marshal(buildArgs)
if err != nil {
return err
}
v.Set("buildargs", string(buildArgsJSON))
headers := http.Header(make(map[string][]string))
buf, err := json.Marshal(cli.configFile.AuthConfigs)
if err != nil {
return err
}
headers.Add("X-Registry-Config", base64.URLEncoding.EncodeToString(buf))
headers.Set("Content-Type", "application/tar")
sopts := &streamOpts{
rawTerminal: true,
in: body,
out: cli.out,
headers: headers,
}
serverResp, err := cli.stream("POST", fmt.Sprintf("/build?%s", v.Encode()), sopts)
// Windows: show error message about modified file permissions.
if runtime.GOOS == "windows" {
h, err := httputils.ParseServerHeader(serverResp.header.Get("Server"))
if err == nil {
if h.OS != "windows" {
fmt.Fprintln(cli.err, `SECURITY WARNING: You are building a Docker image from Windows against a non-Windows Docker host. All files and directories added to build context will have '-rwxr-xr-x' permissions. It is recommended to double check and reset permissions for sensitive files and directories.`)
}
}
}
if jerr, ok := err.(*jsonmessage.JSONError); ok {
// If no error code is set, default to 1
if jerr.Code == 0 {
jerr.Code = 1
}
return Cli.StatusError{Status: jerr.Message, StatusCode: jerr.Code}
}
if err != nil {
return err
}
// Since the build was successful, now we must tag any of the resolved
// images from the above Dockerfile rewrite.
for _, resolved := range resolvedTags {
if err := cli.tagTrusted(resolved.repoInfo, resolved.digestRef, resolved.tagRef); err != nil {
return err
}
}
return nil
}
// hyper build [OPTIONS] PATH
func (cli *HyperClient) HyperCmdBuild(args ...string) error {
var opts struct {
ImageName string `long:"tag" short:"t" default:"" value-name:"\"\"" default-mask:"-" description:"Repository name (and optionally a tag) to be applied to the resulting image in case of success"`
DockerfileName string `long:"file" short:"f" default:"" value-name:"\"\"" default-mask:"-" description:"Customized docker file"`
}
var parser = gflag.NewParser(&opts, gflag.Default)
parser.Usage = "build [OPTIONS] PATH\n\nBuild a new image from the source code at PATH"
args, err := parser.ParseArgs(args)
if err != nil {
if !strings.Contains(err.Error(), "Usage") {
return err
} else {
return nil
}
}
if len(args) == 0 {
return fmt.Errorf("%s: \"build\" requires a minimum of 1 argument, See 'hyper build --help'.", os.Args[0])
}
var (
filename = ""
context archive.Archive
name = ""
)
root := args[0]
if _, err := os.Stat(root); err != nil {
return err
}
absRoot, err := filepath.Abs(root)
if err != nil {
return err
}
filename = opts.DockerfileName // path to Dockerfile
if opts.DockerfileName == "" {
// No -f/--file was specified so use the default
opts.DockerfileName = api.DefaultDockerfileName
filename = filepath.Join(absRoot, opts.DockerfileName)
// Just to be nice ;-) look for 'dockerfile' too but only
// use it if we found it, otherwise ignore this check
if _, err = os.Lstat(filename); os.IsNotExist(err) {
tmpFN := path.Join(absRoot, strings.ToLower(opts.DockerfileName))
if _, err = os.Lstat(tmpFN); err == nil {
opts.DockerfileName = strings.ToLower(opts.DockerfileName)
filename = tmpFN
}
}
}
origDockerfile := opts.DockerfileName // used for error msg
if filename, err = filepath.Abs(filename); err != nil {
return err
}
// Verify that 'filename' is within the build context
filename, err = symlink.FollowSymlinkInScope(filename, absRoot)
if err != nil {
return fmt.Errorf("The Dockerfile (%s) must be within the build context (%s)", origDockerfile, root)
}
// Now reset the dockerfileName to be relative to the build context
opts.DockerfileName, err = filepath.Rel(absRoot, filename)
if err != nil {
return err
}
// And canonicalize dockerfile name to a platform-independent one
opts.DockerfileName, err = archive.CanonicalTarNameForPath(opts.DockerfileName)
if err != nil {
return fmt.Errorf("Cannot canonicalize dockerfile path %s: %v", opts.DockerfileName, err)
}
if _, err = os.Lstat(filename); os.IsNotExist(err) {
return fmt.Errorf("Cannot locate Dockerfile: %s", origDockerfile)
}
var includes = []string{"."}
f, err := os.Open(filepath.Join(root, ".dockerignore"))
if err != nil && !os.IsNotExist(err) {
return err
}
defer f.Close()
var excludes []string
if err == nil {
excludes, err = utils.ReadDockerIgnore(f)
if err != nil {
return err
}
}
if err := utils.ValidateContextDirectory(root, excludes); err != nil {
return fmt.Errorf("Error checking context: '%s'.", err)
}
// If .dockerignore mentions .dockerignore or the Dockerfile
// then make sure we send both files over to the daemon
// because Dockerfile is, obviously, needed no matter what, and
// .dockerignore is needed to know if either one needs to be
// removed. The deamon will remove them for us, if needed, after it
// parses the Dockerfile.
keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
keepThem2, _ := fileutils.Matches(opts.DockerfileName, excludes)
if keepThem1 || keepThem2 {
includes = append(includes, ".dockerignore", opts.DockerfileName)
}
if err := utils.ValidateContextDirectory(root, excludes); err != nil {
return fmt.Errorf("Error checking context: '%s'.", err)
}
options := &archive.TarOptions{
Compression: archive.Uncompressed,
ExcludePatterns: excludes,
IncludeFiles: includes,
}
context, err = archive.TarWithOptions(root, options)
if err != nil {
return err
}
var body io.Reader
// Setup an upload progress bar
// FIXME: ProgressReader shouldn't be this annoying to use
if context != nil {
sf := streamformatter.NewStreamFormatter()
body = progressreader.New(progressreader.Config{
In: context,
Out: os.Stdout,
Formatter: sf,
NewLines: true,
ID: "",
Action: "Sending build context to Docker daemon",
})
}
if opts.ImageName == "" {
// set a image name
name = rand.RandStr(10, "alphanum")
} else {
name = opts.ImageName
repository, tag := parsers.ParseRepositoryTag(name)
if err := registry.ValidateRepositoryName(repository); err != nil {
return err
}
if len(tag) > 0 {
if err := tags.ValidateTagName(tag); err != nil {
return err
}
}
}
v := url.Values{}
v.Set("name", name)
headers := http.Header(make(map[string][]string))
if context != nil {
headers.Set("Content-Type", "application/tar")
}
err = cli.stream("POST", "/image/build?"+v.Encode(), body, cli.out, headers)
if err != nil {
return err
}
return nil
}
// CreateTar create a build context tar for the specified project and service name.
func CreateTar(p *project.Project, name string) (io.ReadCloser, error) {
// This code was ripped off from docker/api/client/build.go
serviceConfig := p.Configs[name]
root := serviceConfig.Build
dockerfileName := filepath.Join(root, serviceConfig.Dockerfile)
absRoot, err := filepath.Abs(root)
if err != nil {
return nil, err
}
filename := dockerfileName
if dockerfileName == "" {
// No -f/--file was specified so use the default
dockerfileName = DefaultDockerfileName
filename = filepath.Join(absRoot, dockerfileName)
// Just to be nice ;-) look for 'dockerfile' too but only
// use it if we found it, otherwise ignore this check
if _, err = os.Lstat(filename); os.IsNotExist(err) {
tmpFN := path.Join(absRoot, strings.ToLower(dockerfileName))
if _, err = os.Lstat(tmpFN); err == nil {
dockerfileName = strings.ToLower(dockerfileName)
filename = tmpFN
}
}
}
origDockerfile := dockerfileName // used for error msg
if filename, err = filepath.Abs(filename); err != nil {
return nil, err
}
// Now reset the dockerfileName to be relative to the build context
dockerfileName, err = filepath.Rel(absRoot, filename)
if err != nil {
return nil, err
}
// And canonicalize dockerfile name to a platform-independent one
dockerfileName, err = archive.CanonicalTarNameForPath(dockerfileName)
if err != nil {
return nil, fmt.Errorf("Cannot canonicalize dockerfile path %s: %v", dockerfileName, err)
}
if _, err = os.Lstat(filename); os.IsNotExist(err) {
return nil, fmt.Errorf("Cannot locate Dockerfile: %s", origDockerfile)
}
var includes = []string{"."}
var excludes []string
dockerIgnorePath := path.Join(root, ".dockerignore")
dockerIgnore, err := os.Open(dockerIgnorePath)
if err != nil {
if !os.IsNotExist(err) {
return nil, err
}
logrus.Warnf("Error while reading .dockerignore (%s) : %s", dockerIgnorePath, err.Error())
excludes = make([]string, 0)
} else {
excludes, err = utils.ReadDockerIgnore(dockerIgnore)
if err != nil {
return nil, err
}
}
// If .dockerignore mentions .dockerignore or the Dockerfile
// then make sure we send both files over to the daemon
// because Dockerfile is, obviously, needed no matter what, and
// .dockerignore is needed to know if either one needs to be
// removed. The deamon will remove them for us, if needed, after it
// parses the Dockerfile.
keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
keepThem2, _ := fileutils.Matches(dockerfileName, excludes)
if keepThem1 || keepThem2 {
includes = append(includes, ".dockerignore", dockerfileName)
}
if err := utils.ValidateContextDirectory(root, excludes); err != nil {
return nil, fmt.Errorf("Error checking context is accessible: '%s'. Please check permissions and try again.", err)
}
options := &archive.TarOptions{
Compression: archive.Uncompressed,
ExcludePatterns: excludes,
IncludeFiles: includes,
}
return archive.TarWithOptions(root, options)
}
// CmdBuild builds a new image from the source code at a given path.
//
// If '-' is provided instead of a path or URL, Docker will build an image from either a Dockerfile or tar archive read from STDIN.
//
// Usage: docker build [OPTIONS] PATH | URL | -
func (cli *DockerCli) CmdBuild(args ...string) error {
cmd := Cli.Subcmd("build", []string{"PATH | URL | -"}, Cli.DockerCommands["build"].Description, true)
flTags := opts.NewListOpts(validateTag)
cmd.Var(&flTags, []string{"t", "-tag"}, "Name and optionally a tag in the 'name:tag' format")
suppressOutput := cmd.Bool([]string{"q", "-quiet"}, false, "Suppress the verbose output generated by the containers")
noCache := cmd.Bool([]string{"-no-cache"}, false, "Do not use cache when building the image")
rm := cmd.Bool([]string{"-rm"}, true, "Remove intermediate containers after a successful build")
forceRm := cmd.Bool([]string{"-force-rm"}, false, "Always remove intermediate containers")
pull := cmd.Bool([]string{"-pull"}, false, "Always attempt to pull a newer version of the image")
dockerfileName := cmd.String([]string{"f", "-file"}, "", "Name of the Dockerfile (Default is 'PATH/Dockerfile')")
flMemoryString := cmd.String([]string{"m", "-memory"}, "", "Memory limit")
flMemorySwap := cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
flShmSize := cmd.String([]string{"-shm-size"}, "", "Size of /dev/shm, default value is 64MB")
flCPUShares := cmd.Int64([]string{"#c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
flCPUPeriod := cmd.Int64([]string{"-cpu-period"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) period")
flCPUQuota := cmd.Int64([]string{"-cpu-quota"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) quota")
flCPUSetCpus := cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
flCPUSetMems := cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
flCgroupParent := cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
flBuildArg := opts.NewListOpts(opts.ValidateEnv)
cmd.Var(&flBuildArg, []string{"-build-arg"}, "Set build-time variables")
isolation := cmd.String([]string{"-isolation"}, "", "Container isolation level")
ulimits := make(map[string]*ulimit.Ulimit)
flUlimits := opts.NewUlimitOpt(&ulimits)
cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")
cmd.Require(flag.Exact, 1)
// For trusted pull on "FROM <image>" instruction.
addTrustedFlags(cmd, true)
cmd.ParseFlags(args, true)
var (
context io.ReadCloser
isRemote bool
err error
)
_, err = exec.LookPath("git")
hasGit := err == nil
specifiedContext := cmd.Arg(0)
var (
contextDir string
tempDir string
relDockerfile string
)
switch {
case specifiedContext == "-":
tempDir, relDockerfile, err = getContextFromReader(cli.in, *dockerfileName)
case urlutil.IsGitURL(specifiedContext) && hasGit:
tempDir, relDockerfile, err = getContextFromGitURL(specifiedContext, *dockerfileName)
case urlutil.IsURL(specifiedContext):
tempDir, relDockerfile, err = getContextFromURL(cli.out, specifiedContext, *dockerfileName)
default:
contextDir, relDockerfile, err = getContextFromLocalDir(specifiedContext, *dockerfileName)
}
if err != nil {
return fmt.Errorf("unable to prepare context: %s", err)
}
if tempDir != "" {
defer os.RemoveAll(tempDir)
contextDir = tempDir
}
// Resolve the FROM lines in the Dockerfile to trusted digest references
// using Notary. On a successful build, we must tag the resolved digests
// to the original name specified in the Dockerfile.
newDockerfile, resolvedTags, err := rewriteDockerfileFrom(filepath.Join(contextDir, relDockerfile), cli.trustedReference)
if err != nil {
return fmt.Errorf("unable to process Dockerfile: %v", err)
}
defer newDockerfile.Close()
// And canonicalize dockerfile name to a platform-independent one
relDockerfile, err = archive.CanonicalTarNameForPath(relDockerfile)
if err != nil {
return fmt.Errorf("cannot canonicalize dockerfile path %s: %v", relDockerfile, err)
}
f, err := os.Open(filepath.Join(contextDir, ".dockerignore"))
if err != nil && !os.IsNotExist(err) {
return err
}
var excludes []string
if err == nil {
excludes, err = utils.ReadDockerIgnore(f)
if err != nil {
return err
}
}
if err := utils.ValidateContextDirectory(contextDir, excludes); err != nil {
return fmt.Errorf("Error checking context: '%s'.", err)
}
// If .dockerignore mentions .dockerignore or the Dockerfile
// then make sure we send both files over to the daemon
// because Dockerfile is, obviously, needed no matter what, and
// .dockerignore is needed to know if either one needs to be
// removed. The deamon will remove them for us, if needed, after it
// parses the Dockerfile. Ignore errors here, as they will have been
// caught by ValidateContextDirectory above.
var includes = []string{"."}
keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
keepThem2, _ := fileutils.Matches(relDockerfile, excludes)
if keepThem1 || keepThem2 {
includes = append(includes, ".dockerignore", relDockerfile)
}
context, err = archive.TarWithOptions(contextDir, &archive.TarOptions{
Compression: archive.Uncompressed,
ExcludePatterns: excludes,
IncludeFiles: includes,
})
if err != nil {
return err
}
// Wrap the tar archive to replace the Dockerfile entry with the rewritten
// Dockerfile which uses trusted pulls.
context = replaceDockerfileTarWrapper(context, newDockerfile, relDockerfile)
// Setup an upload progress bar
progressOutput := streamformatter.NewStreamFormatter().NewProgressOutput(cli.out, true)
var body io.Reader = progress.NewProgressReader(context, progressOutput, 0, "", "Sending build context to Docker daemon")
var memory int64
if *flMemoryString != "" {
parsedMemory, err := units.RAMInBytes(*flMemoryString)
if err != nil {
return err
}
memory = parsedMemory
}
var memorySwap int64
if *flMemorySwap != "" {
if *flMemorySwap == "-1" {
memorySwap = -1
} else {
parsedMemorySwap, err := units.RAMInBytes(*flMemorySwap)
if err != nil {
return err
}
memorySwap = parsedMemorySwap
}
}
var remoteContext string
if isRemote {
remoteContext = cmd.Arg(0)
}
options := types.ImageBuildOptions{
Context: body,
Memory: memory,
MemorySwap: memorySwap,
Tags: flTags.GetAll(),
SuppressOutput: *suppressOutput,
RemoteContext: remoteContext,
NoCache: *noCache,
Remove: *rm,
ForceRemove: *forceRm,
PullParent: *pull,
Isolation: *isolation,
CPUSetCPUs: *flCPUSetCpus,
CPUSetMems: *flCPUSetMems,
CPUShares: *flCPUShares,
CPUQuota: *flCPUQuota,
CPUPeriod: *flCPUPeriod,
CgroupParent: *flCgroupParent,
ShmSize: *flShmSize,
Dockerfile: relDockerfile,
Ulimits: flUlimits.GetList(),
BuildArgs: flBuildArg.GetAll(),
AuthConfigs: cli.configFile.AuthConfigs,
}
response, err := cli.client.ImageBuild(options)
if err != nil {
return err
}
err = jsonmessage.DisplayJSONMessagesStream(response.Body, cli.out, cli.outFd, cli.isTerminalOut)
if err != nil {
if jerr, ok := err.(*jsonmessage.JSONError); ok {
// If no error code is set, default to 1
if jerr.Code == 0 {
jerr.Code = 1
}
return Cli.StatusError{Status: jerr.Message, StatusCode: jerr.Code}
}
}
// Windows: show error message about modified file permissions.
if response.OSType == "windows" {
fmt.Fprintln(cli.err, `SECURITY WARNING: You are building a Docker image from Windows against a non-Windows Docker host. All files and directories added to build context will have '-rwxr-xr-x' permissions. It is recommended to double check and reset permissions for sensitive files and directories.`)
}
// Since the build was successful, now we must tag any of the resolved
// images from the above Dockerfile rewrite.
for _, resolved := range resolvedTags {
if err := cli.tagTrusted(resolved.digestRef, resolved.tagRef); err != nil {
return err
}
}
return nil
}