func (cli *DockerCli) CmdRun(args ...string) error {
// FIXME: just use runconfig.Parse already
cmd := cli.Subcmd("run", "IMAGE [COMMAND] [ARG...]", "Run a command in a new container", true)
// These are flags not stored in Config/HostConfig
var (
flAutoRemove = cmd.Bool([]string{"#rm", "-rm"}, false, "Automatically remove the container when it exits")
flDetach = cmd.Bool([]string{"d", "-detach"}, false, "Run container in background and print container ID")
flSigProxy = cmd.Bool([]string{"#sig-proxy", "-sig-proxy"}, true, "Proxy received signals to the process")
flName = cmd.String([]string{"#name", "-name"}, "", "Assign a name to the container")
flAttach *opts.ListOpts
ErrConflictAttachDetach = fmt.Errorf("Conflicting options: -a and -d")
ErrConflictRestartPolicyAndAutoRemove = fmt.Errorf("Conflicting options: --restart and --rm")
ErrConflictDetachAutoRemove = fmt.Errorf("Conflicting options: --rm and -d")
)
config, hostConfig, cmd, err := runconfig.Parse(cmd, args)
// just in case the Parse does not exit
if err != nil {
utils.ReportError(cmd, err.Error(), true)
}
if len(hostConfig.Dns) > 0 {
// check the DNS settings passed via --dns against
// localhost regexp to warn if they are trying to
// set a DNS to a localhost address
for _, dnsIP := range hostConfig.Dns {
if resolvconf.IsLocalhost(dnsIP) {
fmt.Fprintf(cli.err, "WARNING: Localhost DNS setting (--dns=%s) may fail in containers.\n", dnsIP)
break
}
}
}
if config.Image == "" {
cmd.Usage()
return nil
}
if !*flDetach {
if err := cli.CheckTtyInput(config.AttachStdin, config.Tty); err != nil {
return err
}
} else {
if fl := cmd.Lookup("-attach"); fl != nil {
flAttach = fl.Value.(*opts.ListOpts)
if flAttach.Len() != 0 {
return ErrConflictAttachDetach
}
}
if *flAutoRemove {
return ErrConflictDetachAutoRemove
}
config.AttachStdin = false
config.AttachStdout = false
config.AttachStderr = false
config.StdinOnce = false
}
// Disable flSigProxy when in TTY mode
sigProxy := *flSigProxy
if config.Tty {
sigProxy = false
}
createResponse, err := cli.createContainer(config, hostConfig, hostConfig.ContainerIDFile, *flName)
if err != nil {
return err
}
if sigProxy {
sigc := cli.forwardAllSignals(createResponse.ID)
defer signal.StopCatch(sigc)
}
var (
waitDisplayId chan struct{}
errCh chan error
)
if !config.AttachStdout && !config.AttachStderr {
// Make this asynchronous to allow the client to write to stdin before having to read the ID
waitDisplayId = make(chan struct{})
go func() {
defer close(waitDisplayId)
fmt.Fprintf(cli.out, "%s\n", createResponse.ID)
}()
}
if *flAutoRemove && (hostConfig.RestartPolicy.Name == "always" || hostConfig.RestartPolicy.Name == "on-failure") {
return ErrConflictRestartPolicyAndAutoRemove
}
// We need to instantiate the chan because the select needs it. It can
// be closed but can't be uninitialized.
hijacked := make(chan io.Closer)
// Block the return until the chan gets closed
defer func() {
log.Debugf("End of CmdRun(), Waiting for hijack to finish.")
if _, ok := <-hijacked; ok {
log.Errorf("Hijack did not finish (chan still open)")
}
}()
if config.AttachStdin || config.AttachStdout || config.AttachStderr {
var (
out, stderr io.Writer
in io.ReadCloser
v = url.Values{}
)
v.Set("stream", "1")
if config.AttachStdin {
v.Set("stdin", "1")
in = cli.in
}
if config.AttachStdout {
v.Set("stdout", "1")
out = cli.out
}
if config.AttachStderr {
v.Set("stderr", "1")
if config.Tty {
stderr = cli.out
} else {
stderr = cli.err
}
}
errCh = promise.Go(func() error {
return cli.hijack("POST", "/containers/"+createResponse.ID+"/attach?"+v.Encode(), config.Tty, in, out, stderr, hijacked, nil)
})
} else {
close(hijacked)
}
// Acknowledge the hijack before starting
select {
case closer := <-hijacked:
// Make sure that the hijack gets closed when returning (results
// in closing the hijack chan and freeing server's goroutines)
if closer != nil {
defer closer.Close()
}
case err := <-errCh:
if err != nil {
log.Debugf("Error hijack: %s", err)
return err
}
}
defer func() {
if *flAutoRemove {
if _, _, err = readBody(cli.call("DELETE", "/containers/"+createResponse.ID+"?v=1", nil, false)); err != nil {
log.Errorf("Error deleting container: %s", err)
}
}
}()
//start the container
if _, _, err = readBody(cli.call("POST", "/containers/"+createResponse.ID+"/start", nil, false)); err != nil {
return err
}
if (config.AttachStdin || config.AttachStdout || config.AttachStderr) && config.Tty && cli.isTerminalOut {
if err := cli.monitorTtySize(createResponse.ID, false); err != nil {
log.Errorf("Error monitoring TTY size: %s", err)
}
}
if errCh != nil {
if err := <-errCh; err != nil {
log.Debugf("Error hijack: %s", err)
return err
}
}
// Detached mode: wait for the id to be displayed and return.
if !config.AttachStdout && !config.AttachStderr {
// Detached mode
<-waitDisplayId
return nil
}
var status int
// Attached mode
if *flAutoRemove {
// Autoremove: wait for the container to finish, retrieve
// the exit code and remove the container
if _, _, err := readBody(cli.call("POST", "/containers/"+createResponse.ID+"/wait", nil, false)); err != nil {
return err
}
if _, status, err = getExitCode(cli, createResponse.ID); err != nil {
return err
}
} else {
// No Autoremove: Simply retrieve the exit code
if !config.Tty {
// In non-TTY mode, we can't detach, so we must wait for container exit
if status, err = waitForExit(cli, createResponse.ID); err != nil {
return err
}
} else {
// In TTY mode, there is a race: if the process dies too slowly, the state could
// be updated after the getExitCode call and result in the wrong exit code being reported
if _, status, err = getExitCode(cli, createResponse.ID); err != nil {
return err
}
}
}
if status != 0 {
return &utils.StatusError{StatusCode: status}
}
return nil
}
func (cli *DockerCli) CmdStart(args ...string) error {
var (
cErr chan error
tty bool
cmd = cli.Subcmd("start", "CONTAINER [CONTAINER...]", "Start one or more stopped containers", true)
attach = cmd.Bool([]string{"a", "-attach"}, false, "Attach STDOUT/STDERR and forward signals")
openStdin = cmd.Bool([]string{"i", "-interactive"}, false, "Attach container's STDIN")
)
cmd.Require(flag.Min, 1)
utils.ParseFlags(cmd, args, true)
if *attach || *openStdin {
if cmd.NArg() > 1 {
return fmt.Errorf("You cannot start and attach multiple containers at once.")
}
stream, _, err := cli.call("GET", "/containers/"+cmd.Arg(0)+"/json", nil, false)
if err != nil {
return err
}
env := engine.Env{}
if err := env.Decode(stream); err != nil {
return err
}
config := env.GetSubEnv("Config")
tty = config.GetBool("Tty")
if !tty {
sigc := cli.forwardAllSignals(cmd.Arg(0))
defer signal.StopCatch(sigc)
}
var in io.ReadCloser
v := url.Values{}
v.Set("stream", "1")
if *openStdin && config.GetBool("OpenStdin") {
v.Set("stdin", "1")
in = cli.in
}
v.Set("stdout", "1")
v.Set("stderr", "1")
hijacked := make(chan io.Closer)
// Block the return until the chan gets closed
defer func() {
log.Debugf("CmdStart() returned, defer waiting for hijack to finish.")
if _, ok := <-hijacked; ok {
log.Errorf("Hijack did not finish (chan still open)")
}
cli.in.Close()
}()
cErr = promise.Go(func() error {
return cli.hijack("POST", "/containers/"+cmd.Arg(0)+"/attach?"+v.Encode(), tty, in, cli.out, cli.err, hijacked, nil)
})
// Acknowledge the hijack before starting
select {
case closer := <-hijacked:
// Make sure that the hijack gets closed when returning (results
// in closing the hijack chan and freeing server's goroutines)
if closer != nil {
defer closer.Close()
}
case err := <-cErr:
if err != nil {
return err
}
}
}
var encounteredError error
for _, name := range cmd.Args() {
_, _, err := readBody(cli.call("POST", "/containers/"+name+"/start", nil, false))
if err != nil {
if !*attach && !*openStdin {
// attach and openStdin is false means it could be starting multiple containers
// when a container start failed, show the error message and start next
fmt.Fprintf(cli.err, "%s\n", err)
encounteredError = fmt.Errorf("Error: failed to start one or more containers")
} else {
encounteredError = err
}
} else {
if !*attach && !*openStdin {
fmt.Fprintf(cli.out, "%s\n", name)
}
}
}
if encounteredError != nil {
return encounteredError
}
if *openStdin || *attach {
if tty && cli.isTerminalOut {
if err := cli.monitorTtySize(cmd.Arg(0), false); err != nil {
log.Errorf("Error monitoring TTY size: %s", err)
}
}
if attchErr := <-cErr; attchErr != nil {
return attchErr
}
_, status, err := getExitCode(cli, cmd.Arg(0))
if err != nil {
return err
}
if status != 0 {
return &utils.StatusError{StatusCode: status}
}
}
return nil
}
func (cli *DockerCli) CmdAttach(args ...string) error {
var (
cmd = cli.Subcmd("attach", "CONTAINER", "Attach to a running container", true)
noStdin = cmd.Bool([]string{"#nostdin", "-no-stdin"}, false, "Do not attach STDIN")
proxy = cmd.Bool([]string{"#sig-proxy", "-sig-proxy"}, true, "Proxy all received signals to the process")
)
cmd.Require(flag.Exact, 1)
utils.ParseFlags(cmd, args, true)
name := cmd.Arg(0)
stream, _, err := cli.call("GET", "/containers/"+name+"/json", nil, false)
if err != nil {
return err
}
env := engine.Env{}
if err := env.Decode(stream); err != nil {
return err
}
if !env.GetSubEnv("State").GetBool("Running") {
return fmt.Errorf("You cannot attach to a stopped container, start it first")
}
var (
config = env.GetSubEnv("Config")
tty = config.GetBool("Tty")
)
if err := cli.CheckTtyInput(!*noStdin, tty); err != nil {
return err
}
if tty && cli.isTerminalOut {
if err := cli.monitorTtySize(cmd.Arg(0), false); err != nil {
log.Debugf("Error monitoring TTY size: %s", err)
}
}
var in io.ReadCloser
v := url.Values{}
v.Set("stream", "1")
if !*noStdin && config.GetBool("OpenStdin") {
v.Set("stdin", "1")
in = cli.in
}
v.Set("stdout", "1")
v.Set("stderr", "1")
if *proxy && !tty {
sigc := cli.forwardAllSignals(cmd.Arg(0))
defer signal.StopCatch(sigc)
}
if err := cli.hijack("POST", "/containers/"+cmd.Arg(0)+"/attach?"+v.Encode(), tty, in, cli.out, cli.err, nil, nil); err != nil {
return err
}
_, status, err := getExitCode(cli, cmd.Arg(0))
if err != nil {
return err
}
if status != 0 {
return &utils.StatusError{StatusCode: status}
}
return nil
}