Пример #1
0
// handleFile queues the copies and pulls as necessary for a single new or
// changed file.
func (p *rwFolder) handleFile(file protocol.FileInfo, copyChan chan<- copyBlocksState, finisherChan chan<- *sharedPullerState) {
	curFile, hasCurFile := p.model.CurrentFolderFile(p.folder, file.Name)

	if hasCurFile && len(curFile.Blocks) == len(file.Blocks) && scanner.BlocksEqual(curFile.Blocks, file.Blocks) {
		// We are supposed to copy the entire file, and then fetch nothing. We
		// are only updating metadata, so we don't actually *need* to make the
		// copy.
		l.Debugln(p, "taking shortcut on", file.Name)

		events.Default.Log(events.ItemStarted, map[string]string{
			"folder": p.folder,
			"item":   file.Name,
			"type":   "file",
			"action": "metadata",
		})

		p.queue.Done(file.Name)

		var err error
		if file.IsSymlink() {
			err = p.shortcutSymlink(file)
		} else {
			err = p.shortcutFile(file)
		}

		events.Default.Log(events.ItemFinished, map[string]interface{}{
			"folder": p.folder,
			"item":   file.Name,
			"error":  events.Error(err),
			"type":   "file",
			"action": "metadata",
		})

		if err != nil {
			l.Infoln("Puller: shortcut:", err)
			p.newError(file.Name, err)
		} else {
			p.dbUpdates <- dbUpdateJob{file, dbUpdateShortcutFile}
		}

		return
	}

	// Figure out the absolute filenames we need once and for all
	tempName := filepath.Join(p.dir, defTempNamer.TempName(file.Name))
	realName := filepath.Join(p.dir, file.Name)

	if hasCurFile && !curFile.IsDirectory() && !curFile.IsSymlink() {
		// Check that the file on disk is what we expect it to be according to
		// the database. If there's a mismatch here, there might be local
		// changes that we don't know about yet and we should scan before
		// touching the file. If we can't stat the file we'll just pull it.
		if info, err := osutil.Lstat(realName); err == nil {
			mtime := p.virtualMtimeRepo.GetMtime(file.Name, info.ModTime())
			if mtime.Unix() != curFile.Modified || info.Size() != curFile.Size() {
				l.Debugln("file modified but not rescanned; not pulling:", realName)
				// Scan() is synchronous (i.e. blocks until the scan is
				// completed and returns an error), but a scan can't happen
				// while we're in the puller routine. Request the scan in the
				// background and it'll be handled when the current pulling
				// sweep is complete. As we do retries, we'll queue the scan
				// for this file up to ten times, but the last nine of those
				// scans will be cheap...
				go p.Scan([]string{file.Name})
				return
			}
		}
	}

	scanner.PopulateOffsets(file.Blocks)

	reused := 0
	var blocks []protocol.BlockInfo
	var blocksSize int64

	// Check for an old temporary file which might have some blocks we could
	// reuse.
	tempBlocks, err := scanner.HashFile(tempName, protocol.BlockSize, 0, nil)
	if err == nil {
		// Check for any reusable blocks in the temp file
		tempCopyBlocks, _ := scanner.BlockDiff(tempBlocks, file.Blocks)

		// block.String() returns a string unique to the block
		existingBlocks := make(map[string]struct{}, len(tempCopyBlocks))
		for _, block := range tempCopyBlocks {
			existingBlocks[block.String()] = struct{}{}
		}

		// Since the blocks are already there, we don't need to get them.
		for _, block := range file.Blocks {
			_, ok := existingBlocks[block.String()]
			if !ok {
				blocks = append(blocks, block)
				blocksSize += int64(block.Size)
			}
		}

		// The sharedpullerstate will know which flags to use when opening the
		// temp file depending if we are reusing any blocks or not.
		reused = len(file.Blocks) - len(blocks)
		if reused == 0 {
			// Otherwise, discard the file ourselves in order for the
			// sharedpuller not to panic when it fails to exclusively create a
			// file which already exists
			osutil.InWritableDir(osutil.Remove, tempName)
		}
	} else {
		blocks = file.Blocks
		blocksSize = file.Size()
	}

	if p.checkFreeSpace {
		if free, err := osutil.DiskFreeBytes(p.dir); err == nil && free < blocksSize {
			l.Warnf(`Folder "%s": insufficient disk space in %s for %s: have %.2f MiB, need %.2f MiB`, p.folder, p.dir, file.Name, float64(free)/1024/1024, float64(blocksSize)/1024/1024)
			p.newError(file.Name, errors.New("insufficient space"))
			return
		}
	}

	events.Default.Log(events.ItemStarted, map[string]string{
		"folder": p.folder,
		"item":   file.Name,
		"type":   "file",
		"action": "update",
	})

	s := sharedPullerState{
		file:        file,
		folder:      p.folder,
		tempName:    tempName,
		realName:    realName,
		copyTotal:   len(blocks),
		copyNeeded:  len(blocks),
		reused:      reused,
		ignorePerms: p.ignorePermissions(file),
		version:     curFile.Version,
		mut:         sync.NewMutex(),
		sparse:      p.allowSparse,
	}

	l.Debugf("%v need file %s; copy %d, reused %v", p, file.Name, len(blocks), reused)

	cs := copyBlocksState{
		sharedPullerState: &s,
		blocks:            blocks,
	}
	copyChan <- cs
}
Пример #2
0
func dump(ldb *leveldb.DB) {
	it := ldb.NewIterator(nil, nil)
	var dev protocol.DeviceID
	for it.Next() {
		key := it.Key()
		switch key[0] {
		case db.KeyTypeDevice:
			folder := nulString(key[1 : 1+64])
			devBytes := key[1+64 : 1+64+32]
			name := nulString(key[1+64+32:])
			copy(dev[:], devBytes)
			fmt.Printf("[device] F:%q N:%q D:%v\n", folder, name, dev)

			var f protocol.FileInfo
			err := f.UnmarshalXDR(it.Value())
			if err != nil {
				log.Fatal(err)
			}
			fmt.Printf("  N:%q\n  F:%#o\n  M:%d\n  V:%v\n  S:%d\n  B:%d\n", f.Name, f.Flags, f.Modified, f.Version, f.Size(), len(f.Blocks))

		case db.KeyTypeGlobal:
			folder := nulString(key[1 : 1+64])
			name := nulString(key[1+64:])
			fmt.Printf("[global] F:%q N:%q V:%x\n", folder, name, it.Value())

		case db.KeyTypeBlock:
			folder := nulString(key[1 : 1+64])
			hash := key[1+64 : 1+64+32]
			name := nulString(key[1+64+32:])
			fmt.Printf("[block] F:%q H:%x N:%q I:%d\n", folder, hash, name, binary.BigEndian.Uint32(it.Value()))

		case db.KeyTypeDeviceStatistic:
			fmt.Printf("[dstat]\n  %x\n  %x\n", it.Key(), it.Value())

		case db.KeyTypeFolderStatistic:
			fmt.Printf("[fstat]\n  %x\n  %x\n", it.Key(), it.Value())

		case db.KeyTypeVirtualMtime:
			fmt.Printf("[mtime]\n  %x\n  %x\n", it.Key(), it.Value())

		default:
			fmt.Printf("[???]\n  %x\n  %x\n", it.Key(), it.Value())
		}
	}
}