// Communicate with all EC2 endpoints to see if they are alive.
func (s *ClientTests) TestRegions(c *C) {
name := sessionName("goamz-region-test")
perms := []ec2.IPPerm{{
Protocol: "tcp",
FromPort: 80,
ToPort: 80,
SourceIPs: []string{"127.0.0.1/32"},
}}
errs := make(chan error, len(allRegions))
for _, region := range allRegions {
go func(r aws.Region) {
e := ec2.New(s.ec2.Auth, r)
_, err := e.AuthorizeSecurityGroup(ec2.SecurityGroup{Name: name}, perms)
errs <- err
}(region)
}
for _ = range allRegions {
err := <-errs
if err != nil {
ec2_err, ok := err.(*ec2.Error)
if ok {
c.Check(ec2_err.Code, Matches, "InvalidGroup.NotFound")
} else {
c.Errorf("Non-EC2 error: %s", err)
}
} else {
c.Errorf("Test should have errored but it seems to have succeeded")
}
}
}
func (s *AmazonClientSuite) SetUpSuite(c *C) {
if !testutil.Amazon {
c.Skip("AmazonClientSuite tests not enabled")
}
s.srv.SetUp(c)
s.ec2 = ec2.New(s.srv.auth, aws.USEast)
}
func (s *StepCreateTags) Run(state multistep.StateBag) multistep.StepAction {
ec2conn := state.Get("ec2").(ec2.EC2)
ui := state.Get("ui").(packer.Ui)
amis := state.Get("amis").(map[string]string)
if len(s.Tags) > 0 {
for region, ami := range amis {
ui.Say(fmt.Sprintf("Adding tags to AMI (%s)...", ami))
var ec2Tags []ec2.Tag
for key, value := range s.Tags {
ui.Message(fmt.Sprintf("Adding tag: \"%s\": \"%s\"", key, value))
ec2Tags = append(ec2Tags, ec2.Tag{key, value})
}
regionconn := ec2.New(ec2conn.Auth, aws.Regions[region])
_, err := regionconn.CreateTags([]string{ami}, ec2Tags)
if err != nil {
err := fmt.Errorf("Error adding tags to AMI (%s): %s", ami, err)
state.Put("error", err)
ui.Error(err.Error())
return multistep.ActionHalt
}
}
}
return multistep.ActionContinue
}
func (s *StepAMIRegionCopy) Run(state multistep.StateBag) multistep.StepAction {
ec2conn := state.Get("ec2").(ec2.EC2)
ui := state.Get("ui").(packer.Ui)
amis := state.Get("amis").(map[string]string)
ami := amis[ec2conn.Region.Name]
if len(s.Regions) == 0 {
return multistep.ActionContinue
}
ui.Say(fmt.Sprintf("Copying AMI (%s) to other regions...", ami))
for _, region := range s.Regions {
ui.Message(fmt.Sprintf("Copying to: %s", region))
// Connect to the region where the AMI will be copied to
regionconn := ec2.New(ec2conn.Auth, aws.Regions[region])
resp, err := regionconn.CopyImage(&ec2.CopyImage{
SourceRegion: ec2conn.Region.Name,
SourceImageId: ami,
})
if err != nil {
err := fmt.Errorf("Error Copying AMI (%s) to region (%s): %s", ami, region, err)
state.Put("error", err)
ui.Error(err.Error())
return multistep.ActionHalt
}
stateChange := StateChangeConf{
Conn: regionconn,
Pending: []string{"pending"},
Target: "available",
Refresh: AMIStateRefreshFunc(regionconn, resp.ImageId),
StepState: state,
}
ui.Say(fmt.Sprintf("Waiting for AMI (%s) in region (%s) to become ready...",
resp.ImageId, region))
if _, err := WaitForState(&stateChange); err != nil {
err := fmt.Errorf("Error waiting for AMI (%s) in region (%s): %s", resp.ImageId, region, err)
state.Put("error", err)
ui.Error(err.Error())
return multistep.ActionHalt
}
amis[region] = resp.ImageId
}
state.Put("amis", amis)
return multistep.ActionContinue
}
func (s *S) TestSignatureWithEndpointPath(c *C) {
ec2.FakeTime(true)
defer ec2.FakeTime(false)
testServer.Response(200, nil, RebootInstancesExample)
// https://bugs.launchpad.net/goamz/+bug/1022749
ec2 := ec2.New(s.ec2.Auth, aws.Region{EC2Endpoint: testServer.URL + "/services/Cloud"})
_, err := ec2.RebootInstances("i-10a64379")
c.Assert(err, IsNil)
req := testServer.WaitRequest()
c.Assert(req.Form["Signature"], DeepEquals, []string{"klxs+VwDa1EKHBsxlDYYN58wbP6An+RVdhETv1Fm/os="})
}
func (a *Artifact) Destroy() error {
errors := make([]error, 0)
for region, imageId := range a.Amis {
log.Printf("Deregistering image ID (%s) from region (%s)", imageId, region)
regionconn := ec2.New(a.Conn.Auth, aws.Regions[region])
if _, err := regionconn.DeregisterImage(imageId); err != nil {
errors = append(errors, err)
}
// TODO(mitchellh): Delete the snapshots associated with an AMI too
}
if len(errors) > 0 {
if len(errors) == 1 {
return errors[0]
} else {
return &packer.MultiError{errors}
}
}
return nil
}
func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
region, err := b.config.Region()
if err != nil {
return nil, err
}
auth, err := b.config.AccessConfig.Auth()
if err != nil {
return nil, err
}
ec2conn := ec2.New(auth, region)
// Setup the state bag and initial state for the steps
state := new(multistep.BasicStateBag)
state.Put("config", b.config)
state.Put("ec2", ec2conn)
state.Put("hook", hook)
state.Put("ui", ui)
// Build the steps
steps := []multistep.Step{
&awscommon.StepKeyPair{
Debug: b.config.PackerDebug,
DebugKeyPath: fmt.Sprintf("ec2_%s.pem", b.config.PackerBuildName),
KeyPairName: b.config.TemporaryKeyPairName,
},
&awscommon.StepSecurityGroup{
SecurityGroupId: b.config.SecurityGroupId,
SSHPort: b.config.SSHPort,
VpcId: b.config.VpcId,
},
&awscommon.StepRunSourceInstance{
Debug: b.config.PackerDebug,
ExpectedRootDevice: "ebs",
InstanceType: b.config.InstanceType,
UserData: b.config.UserData,
UserDataFile: b.config.UserDataFile,
SourceAMI: b.config.SourceAmi,
IamInstanceProfile: b.config.IamInstanceProfile,
SubnetId: b.config.SubnetId,
BlockDevices: b.config.BlockDevices,
},
&common.StepConnectSSH{
SSHAddress: awscommon.SSHAddress(ec2conn, b.config.SSHPort),
SSHConfig: awscommon.SSHConfig(b.config.SSHUsername),
SSHWaitTimeout: b.config.SSHTimeout(),
},
&common.StepProvision{},
&stepStopInstance{},
&stepCreateAMI{},
&awscommon.StepAMIRegionCopy{
Regions: b.config.AMIRegions,
},
&awscommon.StepModifyAMIAttributes{
Description: b.config.AMIDescription,
Users: b.config.AMIUsers,
Groups: b.config.AMIGroups,
},
&awscommon.StepCreateTags{
Tags: b.config.AMITags,
},
}
// Run!
if b.config.PackerDebug {
b.runner = &multistep.DebugRunner{
Steps: steps,
PauseFn: common.MultistepDebugFn(ui),
}
} else {
b.runner = &multistep.BasicRunner{Steps: steps}
}
b.runner.Run(state)
// If there was an error, return that
if rawErr, ok := state.GetOk("error"); ok {
return nil, rawErr.(error)
}
// If there are no AMIs, then just return
if _, ok := state.GetOk("amis"); !ok {
return nil, nil
}
// Build the artifact and return it
artifact := &awscommon.Artifact{
Amis: state.Get("amis").(map[string]string),
BuilderIdValue: BuilderId,
Conn: ec2conn,
}
return artifact, nil
}
func (s *LocalServerSuite) SetUpSuite(c *C) {
s.srv.SetUp(c)
s.ServerTests.ec2 = ec2.New(s.srv.auth, s.srv.region)
s.clientTests.ec2 = ec2.New(s.srv.auth, s.srv.region)
}
func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
if runtime.GOOS != "linux" {
return nil, errors.New("The amazon-chroot builder only works on Linux environments.")
}
region, err := b.config.Region()
if err != nil {
return nil, err
}
auth, err := b.config.AccessConfig.Auth()
if err != nil {
return nil, err
}
ec2conn := ec2.New(auth, region)
wrappedCommand := func(command string) (string, error) {
return b.config.tpl.Process(
b.config.CommandWrapper, &wrappedCommandTemplate{
Command: command,
})
}
// Setup the state bag and initial state for the steps
state := new(multistep.BasicStateBag)
state.Put("config", &b.config)
state.Put("ec2", ec2conn)
state.Put("hook", hook)
state.Put("ui", ui)
state.Put("wrappedCommand", CommandWrapper(wrappedCommand))
// Build the steps
steps := []multistep.Step{
&StepInstanceInfo{},
&StepSourceAMIInfo{},
&StepFlock{},
&StepPrepareDevice{},
&StepCreateVolume{},
&StepAttachVolume{},
&StepEarlyUnflock{},
&StepMountDevice{},
&StepMountExtra{},
&StepCopyFiles{},
&StepChrootProvision{},
&StepEarlyCleanup{},
&StepSnapshot{},
&StepRegisterAMI{},
&awscommon.StepAMIRegionCopy{
Regions: b.config.AMIRegions,
},
&awscommon.StepModifyAMIAttributes{
Description: b.config.AMIDescription,
Users: b.config.AMIUsers,
Groups: b.config.AMIGroups,
},
&awscommon.StepCreateTags{
Tags: b.config.AMITags,
},
}
// Run!
if b.config.PackerDebug {
b.runner = &multistep.DebugRunner{
Steps: steps,
PauseFn: common.MultistepDebugFn(ui),
}
} else {
b.runner = &multistep.BasicRunner{Steps: steps}
}
b.runner.Run(state)
// If there was an error, return that
if rawErr, ok := state.GetOk("error"); ok {
return nil, rawErr.(error)
}
// If there are no AMIs, then just return
if _, ok := state.GetOk("amis"); !ok {
return nil, nil
}
// Build the artifact and return it
artifact := &awscommon.Artifact{
Amis: state.Get("amis").(map[string]string),
BuilderIdValue: BuilderId,
Conn: ec2conn,
}
return artifact, nil
}
func (s *StepModifyAMIAttributes) Run(state multistep.StateBag) multistep.StepAction {
ec2conn := state.Get("ec2").(ec2.EC2)
ui := state.Get("ui").(packer.Ui)
amis := state.Get("amis").(map[string]string)
// Determine if there is any work to do.
valid := false
valid = valid || s.Description != ""
valid = valid || (s.Users != nil && len(s.Users) > 0)
valid = valid || (s.Groups != nil && len(s.Groups) > 0)
valid = valid || (s.ProductCodes != nil && len(s.ProductCodes) > 0)
if !valid {
return multistep.ActionContinue
}
// Construct the modify image attribute requests we're going to make.
// We need to make each separately since the EC2 API only allows changing
// one type at a kind currently.
options := make(map[string]*ec2.ModifyImageAttribute)
if s.Description != "" {
options["description"] = &ec2.ModifyImageAttribute{
Description: s.Description,
}
}
if len(s.Groups) > 0 {
options["groups"] = &ec2.ModifyImageAttribute{
AddGroups: s.Groups,
}
}
if len(s.Users) > 0 {
options["users"] = &ec2.ModifyImageAttribute{
AddUsers: s.Users,
}
}
if len(s.ProductCodes) > 0 {
options["product codes"] = &ec2.ModifyImageAttribute{
ProductCodes: s.ProductCodes,
}
}
for region, ami := range amis {
ui.Say(fmt.Sprintf("Modifying attributes on AMI (%s)...", ami))
regionconn := ec2.New(ec2conn.Auth, aws.Regions[region])
for name, opts := range options {
ui.Message(fmt.Sprintf("Modifying: %s", name))
_, err := regionconn.ModifyImageAttribute(ami, opts)
if err != nil {
err := fmt.Errorf("Error modify AMI attributes: %s", err)
state.Put("error", err)
ui.Error(err.Error())
return multistep.ActionHalt
}
}
}
return multistep.ActionContinue
}
func (s *S) SetUpSuite(c *C) {
testServer.Start()
auth := aws.Auth{"abc", "123", ""}
s.ec2 = ec2.New(auth, aws.Region{EC2Endpoint: testServer.URL})
}