Пример #1
0
// Run executes a Packer build and returns a packer.Artifact representing
// a Parallels appliance.
func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	// Create the driver that we'll use to communicate with Parallels
	driver, err := parallelscommon.NewDriver()
	if err != nil {
		return nil, fmt.Errorf("Failed creating Paralles driver: %s", err)
	}

	// Set up the state.
	state := new(multistep.BasicStateBag)
	state.Put("config", b.config)
	state.Put("driver", driver)
	state.Put("hook", hook)
	state.Put("ui", ui)
	state.Put("http_port", uint(0))

	// Build the steps.
	steps := []multistep.Step{
		&parallelscommon.StepPrepareParallelsTools{
			ParallelsToolsMode:   b.config.ParallelsToolsMode,
			ParallelsToolsFlavor: b.config.ParallelsToolsFlavor,
		},
		&parallelscommon.StepOutputDir{
			Force: b.config.PackerForce,
			Path:  b.config.OutputDir,
		},
		&common.StepCreateFloppy{
			Files: b.config.FloppyFiles,
		},
		&StepImport{
			Name:       b.config.VMName,
			SourcePath: b.config.SourcePath,
		},
		&parallelscommon.StepAttachParallelsTools{
			ParallelsToolsMode: b.config.ParallelsToolsMode,
		},
		new(parallelscommon.StepAttachFloppy),
		&parallelscommon.StepPrlctl{
			Commands: b.config.Prlctl,
			Ctx:      b.config.ctx,
		},
		&parallelscommon.StepRun{
			BootWait: b.config.BootWait,
			Headless: b.config.Headless,
		},
		&parallelscommon.StepTypeBootCommand{
			BootCommand:    b.config.BootCommand,
			HostInterfaces: []string{},
			VMName:         b.config.VMName,
			Ctx:            b.config.ctx,
		},
		&common.StepConnectSSH{
			SSHAddress:     parallelscommon.SSHAddress,
			SSHConfig:      parallelscommon.SSHConfigFunc(b.config.SSHConfig),
			SSHWaitTimeout: b.config.SSHWaitTimeout,
		},
		&parallelscommon.StepUploadVersion{
			Path: b.config.PrlctlVersionFile,
		},
		&parallelscommon.StepUploadParallelsTools{
			ParallelsToolsFlavor:    b.config.ParallelsToolsFlavor,
			ParallelsToolsGuestPath: b.config.ParallelsToolsGuestPath,
			ParallelsToolsMode:      b.config.ParallelsToolsMode,
			Ctx:                     b.config.ctx,
		},
		new(common.StepProvision),
		&parallelscommon.StepShutdown{
			Command: b.config.ShutdownCommand,
			Timeout: b.config.ShutdownTimeout,
		},
	}

	// Run the steps.
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}
	b.runner.Run(state)

	// Report any errors.
	if rawErr, ok := state.GetOk("error"); ok {
		return nil, rawErr.(error)
	}

	// If we were interrupted or cancelled, then just exit.
	if _, ok := state.GetOk(multistep.StateCancelled); ok {
		return nil, errors.New("Build was cancelled.")
	}

	if _, ok := state.GetOk(multistep.StateHalted); ok {
		return nil, errors.New("Build was halted.")
	}

	return parallelscommon.NewArtifact(b.config.OutputDir)
}
Пример #2
0
func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	// Create the driver that we'll use to communicate with Parallels
	driver, err := parallelscommon.NewDriver()
	if err != nil {
		return nil, fmt.Errorf("Failed creating Parallels driver: %s", err)
	}

	steps := []multistep.Step{
		&common.StepDownload{
			Checksum:     b.config.ISOChecksum,
			ChecksumType: b.config.ISOChecksumType,
			Description:  "ISO",
			ResultKey:    "iso_path",
			Url:          b.config.ISOUrls,
		},
		&parallelscommon.StepOutputDir{
			Force: b.config.PackerForce,
			Path:  b.config.OutputDir,
		},
		&common.StepCreateFloppy{
			Files: b.config.FloppyFiles,
		},
		new(stepHTTPServer),
		new(stepCreateVM),
		new(stepCreateDisk),
		new(stepAttachISO),
		&parallelscommon.StepAttachParallelsTools{
			ParallelsToolsHostPath: b.config.ParallelsToolsHostPath,
			ParallelsToolsMode:     b.config.ParallelsToolsMode,
		},
		new(parallelscommon.StepAttachFloppy),
		&parallelscommon.StepPrlctl{
			Commands: b.config.Prlctl,
			Tpl:      b.config.tpl,
		},
		&parallelscommon.StepRun{
			BootWait: b.config.BootWait,
			Headless: b.config.Headless, // TODO: migth work on Enterprise Ed.
		},
		&parallelscommon.StepTypeBootCommand{
			BootCommand:    b.config.BootCommand,
			HostInterfaces: b.config.HostInterfaces,
			VMName:         b.config.VMName,
			Tpl:            b.config.tpl,
		},
		&common.StepConnectSSH{
			SSHAddress:     parallelscommon.SSHAddress,
			SSHConfig:      parallelscommon.SSHConfigFunc(b.config.SSHConfig),
			SSHWaitTimeout: b.config.SSHWaitTimeout,
		},
		&parallelscommon.StepUploadVersion{
			Path: b.config.PrlctlVersionFile,
		},
		&parallelscommon.StepUploadParallelsTools{
			ParallelsToolsGuestPath: b.config.ParallelsToolsGuestPath,
			ParallelsToolsHostPath:  b.config.ParallelsToolsHostPath,
			ParallelsToolsMode:      b.config.ParallelsToolsMode,
			Tpl:                     b.config.tpl,
		},
		new(common.StepProvision),
		&parallelscommon.StepShutdown{
			Command: b.config.ShutdownCommand,
			Timeout: b.config.ShutdownTimeout,
		},
		new(parallelscommon.StepRemoveDevices),
	}

	// Setup the state bag
	state := new(multistep.BasicStateBag)
	state.Put("cache", cache)
	state.Put("config", &b.config)
	state.Put("driver", driver)
	state.Put("hook", hook)
	state.Put("ui", ui)

	// Run
	if b.config.PackerDebug {
		b.runner = &multistep.DebugRunner{
			Steps:   steps,
			PauseFn: common.MultistepDebugFn(ui),
		}
	} else {
		b.runner = &multistep.BasicRunner{Steps: steps}
	}

	b.runner.Run(state)

	// If there was an error, return that
	if rawErr, ok := state.GetOk("error"); ok {
		return nil, rawErr.(error)
	}

	// If we were interrupted or cancelled, then just exit.
	if _, ok := state.GetOk(multistep.StateCancelled); ok {
		return nil, errors.New("Build was cancelled.")
	}

	if _, ok := state.GetOk(multistep.StateHalted); ok {
		return nil, errors.New("Build was halted.")
	}

	return parallelscommon.NewArtifact(b.config.OutputDir)
}
Пример #3
0
func (b *Builder) Run(ui packer.Ui, hook packer.Hook, cache packer.Cache) (packer.Artifact, error) {
	// Create the driver that we'll use to communicate with Parallels
	driver, err := parallelscommon.NewDriver()
	if err != nil {
		return nil, fmt.Errorf("Failed creating Parallels driver: %s", err)
	}

	steps := []multistep.Step{
		&parallelscommon.StepPrepareParallelsTools{
			ParallelsToolsFlavor: b.config.ParallelsToolsFlavor,
			ParallelsToolsMode:   b.config.ParallelsToolsMode,
		},
		&common.StepDownload{
			Checksum:     b.config.ISOChecksum,
			ChecksumType: b.config.ISOChecksumType,
			Description:  "ISO",
			Extension:    "iso",
			ResultKey:    "iso_path",
			TargetPath:   b.config.TargetPath,
			Url:          b.config.ISOUrls,
		},
		&parallelscommon.StepOutputDir{
			Force: b.config.PackerForce,
			Path:  b.config.OutputDir,
		},
		&common.StepCreateFloppy{
			Files: b.config.FloppyFiles,
		},
		&common.StepHTTPServer{
			HTTPDir:     b.config.HTTPDir,
			HTTPPortMin: b.config.HTTPPortMin,
			HTTPPortMax: b.config.HTTPPortMax,
		},
		new(stepCreateVM),
		new(stepCreateDisk),
		new(stepSetBootOrder),
		new(stepAttachISO),
		&parallelscommon.StepAttachParallelsTools{
			ParallelsToolsMode: b.config.ParallelsToolsMode,
		},
		new(parallelscommon.StepAttachFloppy),
		&parallelscommon.StepPrlctl{
			Commands: b.config.Prlctl,
			Ctx:      b.config.ctx,
		},
		&parallelscommon.StepRun{
			BootWait: b.config.BootWait,
		},
		&parallelscommon.StepTypeBootCommand{
			BootCommand:    b.config.BootCommand,
			HostInterfaces: b.config.HostInterfaces,
			VMName:         b.config.VMName,
			Ctx:            b.config.ctx,
		},
		&communicator.StepConnect{
			Config:    &b.config.SSHConfig.Comm,
			Host:      parallelscommon.CommHost,
			SSHConfig: parallelscommon.SSHConfigFunc(b.config.SSHConfig),
		},
		&parallelscommon.StepUploadVersion{
			Path: b.config.PrlctlVersionFile,
		},
		&parallelscommon.StepUploadParallelsTools{
			ParallelsToolsFlavor:    b.config.ParallelsToolsFlavor,
			ParallelsToolsGuestPath: b.config.ParallelsToolsGuestPath,
			ParallelsToolsMode:      b.config.ParallelsToolsMode,
			Ctx:                     b.config.ctx,
		},
		new(common.StepProvision),
		&parallelscommon.StepShutdown{
			Command: b.config.ShutdownCommand,
			Timeout: b.config.ShutdownTimeout,
		},
		&parallelscommon.StepPrlctl{
			Commands: b.config.PrlctlPost,
			Ctx:      b.config.ctx,
		},
		&parallelscommon.StepCompactDisk{
			Skip: b.config.SkipCompaction,
		},
	}

	// Setup the state bag
	state := new(multistep.BasicStateBag)
	state.Put("cache", cache)
	state.Put("config", &b.config)
	state.Put("debug", b.config.PackerDebug)
	state.Put("driver", driver)
	state.Put("hook", hook)
	state.Put("ui", ui)

	// Run
	b.runner = common.NewRunnerWithPauseFn(steps, b.config.PackerConfig, ui, state)
	b.runner.Run(state)

	// If there was an error, return that
	if rawErr, ok := state.GetOk("error"); ok {
		return nil, rawErr.(error)
	}

	// If we were interrupted or cancelled, then just exit.
	if _, ok := state.GetOk(multistep.StateCancelled); ok {
		return nil, errors.New("Build was cancelled.")
	}

	if _, ok := state.GetOk(multistep.StateHalted); ok {
		return nil, errors.New("Build was halted.")
	}

	return parallelscommon.NewArtifact(b.config.OutputDir)
}