func (c *Car) Setup() {
c.pins[in1], _ = hwio.GetPin("gpio24")
c.pins[in2], _ = hwio.GetPin("gpio17")
c.pins[in3], _ = hwio.GetPin("gpio23")
c.pins[in4], _ = hwio.GetPin("gpio22")
_ = hwio.PinMode(c.pins[in1], hwio.OUTPUT)
_ = hwio.PinMode(c.pins[in2], hwio.OUTPUT)
_ = hwio.PinMode(c.pins[in3], hwio.OUTPUT)
_ = hwio.PinMode(c.pins[in4], hwio.OUTPUT)
}
func main() {
// Get the pins we're going to use. These are on a beaglebone.
sinPin, _ := hwio.GetPin("P9.11")
sclkPin, _ := hwio.GetPin("P9.12")
xlatPin, _ := hwio.GetPin("P9.13")
gsclkPin, _ := hwio.GetPin("P9.14")
blankPin, _ := hwio.GetPin("P9.15")
fmt.Printf("Pins are: sin=%d, sclk=%d, xlat=%d, gsclk=%d, blank=%d", sinPin, sclkPin, xlatPin, gsclkPin, blankPin)
// Make them all outputs
e := hwio.PinMode(sinPin, hwio.OUTPUT)
if e == nil {
hwio.PinMode(sclkPin, hwio.OUTPUT)
}
if e == nil {
hwio.PinMode(xlatPin, hwio.OUTPUT)
}
if e == nil {
hwio.PinMode(gsclkPin, hwio.OUTPUT)
}
if e == nil {
hwio.PinMode(blankPin, hwio.OUTPUT)
}
if e != nil {
fmt.Printf("Could not initialise pins: %s", e)
return
}
// set clocks low
hwio.DigitalWrite(sclkPin, hwio.LOW)
hwio.DigitalWrite(xlatPin, hwio.LOW)
hwio.DigitalWrite(gsclkPin, hwio.LOW)
// run GS clock in it's own space
hwio.DigitalWrite(blankPin, hwio.HIGH)
hwio.DigitalWrite(blankPin, hwio.LOW)
clockData(gsclkPin)
for b := 0; b < 4096; b++ {
writeData(uint(b), sinPin, sclkPin, xlatPin)
for j := 0; j < 10; j++ {
hwio.DigitalWrite(blankPin, hwio.HIGH)
hwio.DigitalWrite(blankPin, hwio.LOW)
clockData(gsclkPin)
}
// hwio.Delay(100)
}
// hwio.ShiftOut(dataPin, clockPin, uint(data), hwio.MSBFIRST)
}
func main() {
// get a pin by name. You could also just use the logical pin number, but this is
// more readable. On BeagleBone, USR0 is an on-board LED.
ledPin, err := hwio.GetPin("USR1")
// Generally we wouldn't expect an error, but perhaps someone is running this a
if err != nil {
fmt.Println(err)
os.Exit(1)
}
// Set the mode of the pin to output. This will return an error if, for example,
// we were trying to set an analog input to an output.
err = hwio.PinMode(ledPin, hwio.OUTPUT)
if err != nil {
fmt.Println(err)
os.Exit(1)
}
// Run the blink forever
for {
hwio.DigitalWrite(ledPin, hwio.HIGH)
hwio.Delay(1000)
hwio.DigitalWrite(ledPin, hwio.LOW)
hwio.Delay(1000)
}
}
func NewButton(pin string) (*Button, error) {
buttonPin, err := hwio.GetPin(pin)
if err != nil {
return nil, err
}
err = hwio.PinMode(buttonPin, hwio.INPUT)
if err != nil {
return nil, err
}
return &Button{pin: buttonPin}, nil
}
func main() {
// Get the pins we're going to use. These are on a beaglebone.
dataPin, _ := hwio.GetPin("P8.3") // connected to pin 14
clockPin, _ := hwio.GetPin("P8.4") // connected to pin 11
storePin, _ := hwio.GetPin("P8.5") // connected to pin 12
// Make them all outputs
hwio.PinMode(dataPin, hwio.OUTPUT)
hwio.PinMode(clockPin, hwio.OUTPUT)
hwio.PinMode(storePin, hwio.OUTPUT)
data := 0
// Set the initial state of the clock and store pins to low. These both
// trigger on the rising edge.
hwio.DigitalWrite(clockPin, hwio.LOW)
hwio.DigitalWrite(storePin, hwio.LOW)
for {
// Shift out 8 bits
hwio.ShiftOut(dataPin, clockPin, uint(data), hwio.MSBFIRST)
// You can use this line instead to clock out 16 bits if you have
// two 74HC595's chained together
// hwio.ShiftOutSize(dataPin, clockPin, uint(data), hwio.MSBFIRST, 16)
// Pulse the store pin once
hwio.DigitalWrite(storePin, hwio.HIGH)
hwio.DigitalWrite(storePin, hwio.LOW)
// Poor humans cannot read binary as fast as the machine can display it
hwio.Delay(100)
data++
}
}
func SetupIo() Hardware {
//return Hardware{}
pins := Hardware{
InMotion: GetPin("GPIO2"), // pi rev2 calls it GPIO2
InSwitch3: GetPin("GPIO3"), // pi rev2 calls it GPIO3
InSwitch1: GetPin("GPIO4"),
InSwitch2: GetPin("GPIO17"),
OutLed: GetPin("GPIO27"), // pi rev2 calls it GPIO27
OutSpeaker: GetPin("GPIO22"),
InDoorClosed: GetPin("GPIO10"),
OutStrike: GetPin("GPIO9"),
}
if err := hwio.PinMode(pins.InMotion, hwio.INPUT_PULLUP); err != nil {
panic(err)
}
if err := hwio.PinMode(pins.InSwitch1, hwio.INPUT_PULLUP); err != nil {
panic(err)
}
if err := hwio.PinMode(pins.InSwitch2, hwio.INPUT_PULLUP); err != nil {
panic(err)
}
if err := hwio.PinMode(pins.InSwitch3, hwio.INPUT_PULLUP); err != nil {
panic(err)
}
if err := hwio.PinMode(pins.InDoorClosed, hwio.INPUT_PULLDOWN); err != nil {
panic(err)
}
if err := hwio.PinMode(pins.OutLed, hwio.OUTPUT); err != nil {
panic(err)
}
if err := hwio.PinMode(pins.OutSpeaker, hwio.OUTPUT); err != nil {
panic(err)
}
if err := hwio.PinMode(pins.OutStrike, hwio.OUTPUT); err != nil {
panic(err)
}
pins.SetLed("off")
pins.SetStrike("locked")
return pins
}
// Run is the block's main loop. Here we listen on the different channels we set up.
func (b *DigitalPin) Run() {
var pin hwio.Pin
var pinStr string
var err error
for {
select {
case ruleI := <-b.inrule:
if pinStr != "" {
b.Log("closing pin " + pinStr)
err = hwio.ClosePin(pin)
if err != nil {
b.Error(err)
}
}
pinStr, err = util.ParseString(ruleI, "Pin")
if err != nil {
b.Error(err)
continue
}
pin, err = hwio.GetPin(pinStr)
if err != nil {
pinStr = ""
pin = 0
b.Error(err)
continue
}
err = hwio.PinMode(pin, hwio.INPUT)
if err != nil {
b.Error(err)
continue
}
case <-b.quit:
// quit the block
err = hwio.ClosePin(pin)
b.Error(err)
return
case c := <-b.queryrule:
// deal with a query request
c <- map[string]interface{}{
"Pin": pinStr,
}
case <-b.inpoll:
if pin == 0 {
continue
}
v, err := hwio.DigitalRead(pin)
if err != nil {
b.Log(v)
b.Error(err)
continue
}
outValue := float64(v)
out := map[string]interface{}{
"value": outValue,
"pin": pinStr,
}
b.out <- out
}
}
}
// Run is the block's main loop. Here we listen on the different channels we set up.
func (b *ToDigitalPin) Run() {
var pin hwio.Pin
var pinStr string
var tree *jee.TokenTree
var path string
var err error
for {
select {
case ruleI := <-b.inrule:
path, err = util.ParseString(ruleI, "Path")
if err != nil {
b.Error(err)
continue
}
token, err := jee.Lexer(path)
if err != nil {
b.Error(err)
continue
}
tree, err = jee.Parser(token)
if err != nil {
b.Error(err)
continue
}
if pinStr != "" {
b.Log("closing pin " + pinStr)
err = hwio.ClosePin(pin)
if err != nil {
b.Error(err)
}
}
pinStr, err = util.ParseString(ruleI, "Pin")
if err != nil {
b.Error(err)
continue
}
pin, err = hwio.GetPin(pinStr)
if err != nil {
pinStr = ""
pin = 0
b.Error(err)
continue
}
err = hwio.PinMode(pin, hwio.OUTPUT)
if err != nil {
b.Error(err)
continue
}
case <-b.quit:
// quit the block
err = hwio.ClosePin(pin)
b.Error(err)
return
case c := <-b.queryrule:
// deal with a query request
c <- map[string]interface{}{
"Pin": pinStr,
"Path": path,
}
case msg := <-b.in:
if tree == nil {
continue
}
valI, err := jee.Eval(tree, msg)
if err != nil {
b.Error(err)
continue
}
val, ok := valI.(float64)
if !ok {
log.Println(msg)
b.Error(errors.New("couldn't assert value to a float"))
continue
}
if int(val) == 0 {
hwio.DigitalWrite(pin, hwio.LOW)
} else if int(val) == 1 {
hwio.DigitalWrite(pin, hwio.HIGH)
} else {
b.Error(errors.New("value must be 0 for LOW and 1 for HIGH"))
continue
}
}
}
}
// Run is the block's main loop. Here we listen on the different channels we set up.
func (b *AnalogPin) Run() {
var pin hwio.Pin
var pinStr string
var err error
// Get the module
m, e := hwio.GetAnalogModule()
if e != nil {
b.Log(e)
}
// Enable it.
e = m.Enable()
if e != nil {
b.Log(e)
}
for {
select {
case ruleI := <-b.inrule:
if pinStr != "" {
err = hwio.ClosePin(pin)
b.Error(err)
}
pinStr, err = util.ParseString(ruleI, "Pin")
if err != nil {
b.Error(err)
continue
}
pin, err = hwio.GetPin(pinStr)
if err != nil {
b.Error(err)
continue
}
err = hwio.PinMode(pin, hwio.INPUT)
if err != nil {
b.Error(err)
continue
}
case <-b.quit:
// quit the block
err = hwio.ClosePin(pin)
b.Error(err)
return
case c := <-b.queryrule:
// deal with a query request
c <- map[string]interface{}{
"Pin": pinStr,
}
case <-b.inpoll:
if pin == 0 {
continue
}
v, err := hwio.AnalogRead(pin)
if err != nil {
b.Error(err)
continue
}
out := map[string]interface{}{
"value": float64(v),
"pin": pinStr,
}
b.out <- out
}
}
}
