Пример #1
0
func (d NodeConfigCheck) Check() types.DiagnosticResult {
	r := types.NewDiagnosticResult(NodeConfigCheckName)
	r.Debug("DH1001", fmt.Sprintf("Looking for node config file at '%s'", d.NodeConfigFile))
	nodeConfig, err := configapilatest.ReadAndResolveNodeConfig(d.NodeConfigFile)
	if err != nil {
		r.Error("DH1002", err, fmt.Sprintf("Could not read node config file '%s':\n(%T) %[2]v", d.NodeConfigFile, err))
		return r
	}

	r.Info("DH1003", fmt.Sprintf("Found a node config file: %[1]s", d.NodeConfigFile))

	results := configvalidation.ValidateNodeConfig(nodeConfig, nil)
	if len(results.Errors) > 0 {
		errText := fmt.Sprintf("Validation of node config file '%s' failed:\n", d.NodeConfigFile)
		for _, err := range results.Errors {
			errText += fmt.Sprintf("%v\n", err)
		}
		r.Error("DH1004", nil, errText)
	}
	if len(results.Warnings) > 0 {
		warnText := fmt.Sprintf("Validation of node config file '%s' warned:\n", d.NodeConfigFile)
		for _, warn := range results.Warnings {
			warnText += fmt.Sprintf("%v\n", warn)
		}
		r.Warn("DH1005", nil, warnText)
	}
	return r
}
Пример #2
0
// Run runs the node config validation and returns the result of the validation as a boolean as well as any errors
// that occurred trying to validate the file
func (o *ValidateNodeConfigOptions) Run() (ok bool, err error) {
	nodeConfig, err := configapilatest.ReadAndResolveNodeConfig(o.NodeConfigFile)
	if err != nil {
		return true, err
	}

	results := validation.ValidateNodeConfig(nodeConfig, nil)
	writer := tabwriter.NewWriter(o.Out, minColumnWidth, tabWidth, padding, padchar, flags)
	err = prettyPrintValidationResults(results, writer)
	if err != nil {
		return len(results.Errors) == 0, fmt.Errorf("could not print results: %v", err)
	}
	writer.Flush()
	return len(results.Errors) == 0, nil
}
Пример #3
0
func (d NodeConfigCheck) Check() types.DiagnosticResult {
	r := types.NewDiagnosticResult(NodeConfigCheckName)
	r.Debug("DH1001", fmt.Sprintf("Looking for node config file at '%s'", d.NodeConfigFile))
	nodeConfig, err := configapilatest.ReadAndResolveNodeConfig(d.NodeConfigFile)
	if err != nil {
		r.Error("DH1002", err, fmt.Sprintf("Could not read node config file '%s':\n(%T) %[2]v", d.NodeConfigFile, err))
		return r
	}

	r.Info("DH1003", fmt.Sprintf("Found a node config file: %[1]s", d.NodeConfigFile))

	for _, err := range configvalidation.ValidateNodeConfig(nodeConfig) {
		r.Error("DH1004", err, fmt.Sprintf("Validation of node config file '%s' failed:\n(%T) %[2]v", d.NodeConfigFile, err))
	}
	return r
}
Пример #4
0
// RunNode takes the options and:
// 1.  Creates certs if needed
// 2.  Reads fully specified node config OR builds a fully specified node config from the args
// 3.  Writes the fully specified node config and exits if needed
// 4.  Starts the node based on the fully specified config
func (o NodeOptions) RunNode() error {
	if !o.IsRunFromConfig() || o.IsWriteConfigOnly() {
		glog.V(2).Infof("Generating node configuration")
		if err := o.CreateNodeConfig(); err != nil {
			return err
		}
	}

	if o.IsWriteConfigOnly() {
		return nil
	}

	var nodeConfig *configapi.NodeConfig
	var err error
	if o.IsRunFromConfig() {
		nodeConfig, err = configapilatest.ReadAndResolveNodeConfig(o.ConfigFile)
	} else {
		nodeConfig, err = o.NodeArgs.BuildSerializeableNodeConfig()
	}
	if err != nil {
		return err
	}

	validationResults := validation.ValidateNodeConfig(nodeConfig, nil)
	if len(validationResults.Warnings) != 0 {
		for _, warning := range validationResults.Warnings {
			glog.Warningf("%v", warning)
		}
	}
	if len(validationResults.Errors) != 0 {
		return kerrors.NewInvalid("NodeConfig", o.ConfigFile, validationResults.Errors)
	}

	_, kubeClientConfig, err := configapi.GetKubeClient(nodeConfig.MasterKubeConfig)
	if err != nil {
		return err
	}
	glog.Infof("Starting a node connected to %s", kubeClientConfig.Host)

	if err := StartNode(*nodeConfig); err != nil {
		return err
	}

	return nil
}
Пример #5
0
// RunNode takes the options and:
// 1.  Creates certs if needed
// 2.  Reads fully specified node config OR builds a fully specified node config from the args
// 3.  Writes the fully specified node config and exits if needed
// 4.  Starts the node based on the fully specified config
func (o NodeOptions) RunNode() error {
	if !o.IsRunFromConfig() || o.IsWriteConfigOnly() {
		glog.V(2).Infof("Generating node configuration")
		if err := o.CreateNodeConfig(); err != nil {
			return err
		}
	}

	if o.IsWriteConfigOnly() {
		return nil
	}

	var nodeConfig *configapi.NodeConfig
	var err error
	if o.IsRunFromConfig() {
		nodeConfig, err = configapilatest.ReadAndResolveNodeConfig(o.ConfigFile)
	} else {
		nodeConfig, err = o.NodeArgs.BuildSerializeableNodeConfig()
	}
	if err != nil {
		return err
	}

	validationResults := validation.ValidateNodeConfig(nodeConfig, nil)
	if len(validationResults.Warnings) != 0 {
		for _, warning := range validationResults.Warnings {
			glog.Warningf("%v", warning)
		}
	}
	if len(validationResults.Errors) != 0 {
		return kerrors.NewInvalid(configapi.Kind("NodeConfig"), o.ConfigFile, validationResults.Errors)
	}

	if err := ValidateRuntime(nodeConfig, o.NodeArgs.Components); err != nil {
		return err
	}

	if err := StartNode(*nodeConfig, o.NodeArgs.Components); err != nil {
		return err
	}

	return nil
}
Пример #6
0
func executeAllInOneCommandWithConfigs(args []string) (*MasterArgs, *configapi.MasterConfig, error, *NodeArgs, *configapi.NodeConfig, error) {
	argsToUse := make([]string, 0, 4+len(args))
	argsToUse = append(argsToUse, "start")
	argsToUse = append(argsToUse, args...)
	argsToUse = append(argsToUse, "--write-config="+getCleanAllInOneConfigDir())
	argsToUse = append(argsToUse, "--create-certs=false")

	root := &cobra.Command{
		Use:   "openshift",
		Short: "test",
		Long:  "",
		Run: func(c *cobra.Command, args []string) {
			c.Help()
		},
	}

	openshiftStartCommand, cfg := NewCommandStartAllInOne("openshift start", os.Stdout)
	root.AddCommand(openshiftStartCommand)
	root.SetArgs(argsToUse)
	root.Execute()

	masterCfg, masterErr := configapilatest.ReadAndResolveMasterConfig(path.Join(getAllInOneConfigDir(), "master", "master-config.yaml"))

	var nodeCfg *configapi.NodeConfig
	var nodeErr error

	nodeConfigs, nodeErr := filepath.Glob(getNodeConfigGlob())
	if nodeErr == nil {
		if len(nodeConfigs) != 1 {
			nodeErr = fmt.Errorf("found wrong number of node configs: %v", nodeConfigs)
		} else {
			nodeCfg, nodeErr = configapilatest.ReadAndResolveNodeConfig(nodeConfigs[0])
		}
	}

	if nodeCfg == nil && nodeErr == nil {
		nodeErr = errors.New("did not find node config")
	}
	return cfg.MasterOptions.MasterArgs, masterCfg, masterErr, cfg.NodeArgs, nodeCfg, nodeErr
}