Пример #1
0
// readARP watches a handle for incoming ARP responses we might care about, and prints them.
//
// readARP loops until 'stop' is closed.
func readARP(handle *pcap.Handle, iface *net.Interface, stop chan struct{}) {
	src := gopacket.NewPacketSource(handle, layers.LayerTypeEthernet)
	in := src.Packets()
	for {
		var packet gopacket.Packet
		select {
		case <-stop:
			return
		case packet = <-in:
			arpLayer := packet.Layer(layers.LayerTypeARP)
			if arpLayer == nil {
				continue
			}
			arp := arpLayer.(*layers.ARP)
			if arp.Operation != layers.ARPReply || bytes.Equal([]byte(iface.HardwareAddr), arp.SourceHwAddress) {
				// This is a packet I sent.
				continue
			}
			// Note:  we might get some packets here that aren't responses to ones we've sent,
			// if for example someone else sends US an ARP request.  Doesn't much matter, though...
			// all information is good information :)
			log.Printf("IP %v is at %v", net.IP(arp.SourceProtAddress), net.HardwareAddr(arp.SourceHwAddress))
		}
	}
}
Пример #2
0
func TestPcapFileRead(t *testing.T) {
	for _, file := range []struct {
		filename       string
		num            int
		expectedLayers []gopacket.LayerType
	}{
		{"test_loopback.pcap",
			24,
			[]gopacket.LayerType{
				layers.LayerTypeLoopback,
				layers.LayerTypeIPv6,
				layers.LayerTypeTCP,
			},
		},
		{"test_ethernet.pcap",
			16,
			[]gopacket.LayerType{
				layers.LayerTypeEthernet,
				layers.LayerTypeIPv4,
				layers.LayerTypeTCP,
			},
		},
		{"test_dns.pcap",
			10,
			[]gopacket.LayerType{
				layers.LayerTypeEthernet,
				layers.LayerTypeIPv4,
				layers.LayerTypeUDP,
				layers.LayerTypeDNS,
			},
		},
	} {
		t.Logf("\n\n\n\nProcessing file %s\n\n\n\n", file.filename)

		packets := []gopacket.Packet{}
		if handle, err := OpenOffline(file.filename); err != nil {
			t.Fatal(err)
		} else {
			packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
			for packet := range packetSource.Packets() {
				packets = append(packets, packet)
			}
		}
		if len(packets) != file.num {
			t.Fatal("Incorrect number of packets, want", file.num, "got", len(packets))
		}
		for i, p := range packets {
			t.Log(p.Dump())
			for _, layertype := range file.expectedLayers {
				if p.Layer(layertype) == nil {
					t.Fatal("Packet", i, "has no layer type\n%s", layertype, p.Dump())
				}
			}
		}
	}
}
Пример #3
0
func Run(src gopacket.PacketDataSource) {
	if !flag.Parsed() {
		log.Fatalln("Run called without flags.Parse() being called")
	}
	var dec gopacket.Decoder
	var ok bool
	if dec, ok = gopacket.DecodersByLayerName[*decoder]; !ok {
		log.Fatalln("No decoder named", *decoder)
	}
	source := gopacket.NewPacketSource(src, dec)
	source.Lazy = *lazy
	source.NoCopy = true
	fmt.Fprintln(os.Stderr, "Starting to read packets")
	count := 0
	bytes := int64(0)
	start := time.Now()
	errors := 0
	truncated := 0
	layertypes := map[gopacket.LayerType]int{}
	for packet := range source.Packets() {
		count++
		bytes += int64(len(packet.Data()))
		if *dump {
			fmt.Println(packet.Dump())
		} else if *print {
			fmt.Println(packet)
		}
		if !*lazy || *print || *dump { // if we've already decoded all layers...
			for _, layer := range packet.Layers() {
				layertypes[layer.LayerType()]++
			}
			if packet.Metadata().Truncated {
				truncated++
			}
			if errLayer := packet.ErrorLayer(); errLayer != nil {
				errors++
				if *printErrors {
					fmt.Println("Error:", errLayer.Error())
					fmt.Println("--- Packet ---")
					fmt.Println(packet.Dump())
				}
			}
		}
		done := *maxcount > 0 && count >= *maxcount
		if count%*statsevery == 0 || done {
			fmt.Fprintf(os.Stderr, "Processed %v packets (%v bytes) in %v, %v errors and %v truncated packets\n", count, bytes, time.Since(start), errors, truncated)
			if len(layertypes) > 0 {
				fmt.Fprintf(os.Stderr, "Layer types seen: %+v\n", layertypes)
			}
		}
		if done {
			break
		}
	}
}
Пример #4
0
func main() {
	defer util.Run()()
	var handle *pcap.Handle
	var err error

	// Set up pcap packet capture
	if *fname != "" {
		log.Printf("Reading from pcap dump %q", *fname)
		handle, err = pcap.OpenOffline(*fname)
	} else {
		log.Printf("Starting capture on interface %q", *iface)
		handle, err = pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
	}
	if err != nil {
		log.Fatal(err)
	}

	if err := handle.SetBPFFilter(*filter); err != nil {
		log.Fatal(err)
	}

	// Set up assembly
	streamFactory := &httpStreamFactory{}
	streamPool := tcpassembly.NewStreamPool(streamFactory)
	assembler := tcpassembly.NewAssembler(streamPool)

	log.Println("reading in packets")
	// Read in packets, pass to assembler.
	packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
	packets := packetSource.Packets()
	ticker := time.Tick(time.Minute)
	for {
		select {
		case packet := <-packets:
			// A nil packet indicates the end of a pcap file.
			if packet == nil {
				return
			}
			if *logAllPackets {
				log.Println(packet)
			}
			if packet.NetworkLayer() == nil || packet.TransportLayer() == nil || packet.TransportLayer().LayerType() != layers.LayerTypeTCP {
				log.Println("Unusable packet")
				continue
			}
			tcp := packet.TransportLayer().(*layers.TCP)
			assembler.AssembleWithTimestamp(packet.NetworkLayer().NetworkFlow(), tcp, packet.Metadata().Timestamp)

		case <-ticker:
			// Every minute, flush connections that haven't seen activity in the past 2 minutes.
			assembler.FlushOlderThan(time.Now().Add(time.Minute * -2))
		}
	}
}
Пример #5
0
func main() {
	defer util.Run()()
	log.Printf("starting capture on interface %q", *iface)
	// Set up pcap packet capture
	handle, err := pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
	if err != nil {
		panic(err)
	}
	if err := handle.SetBPFFilter(*filter); err != nil {
		panic(err)
	}

	// Set up assembly
	streamFactory := &myFactory{bidiMap: make(map[key]*bidi)}
	streamPool := tcpassembly.NewStreamPool(streamFactory)
	assembler := tcpassembly.NewAssembler(streamPool)

	log.Println("reading in packets")
	// Read in packets, pass to assembler.
	packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
	packets := packetSource.Packets()
	ticker := time.Tick(timeout / 4)
	for {
		select {
		case packet := <-packets:
			if *logAllPackets {
				log.Println(packet)
			}
			if packet.NetworkLayer() == nil || packet.TransportLayer() == nil || packet.TransportLayer().LayerType() != layers.LayerTypeTCP {
				log.Println("Unusable packet")
				continue
			}
			tcp := packet.TransportLayer().(*layers.TCP)
			assembler.AssembleWithTimestamp(packet.NetworkLayer().NetworkFlow(), tcp, packet.Metadata().Timestamp)

		case <-ticker:
			// Every minute, flush connections that haven't seen activity in the past minute.
			log.Println("---- FLUSHING ----")
			assembler.FlushOlderThan(time.Now().Add(-timeout))
			streamFactory.collectOldStreams()
		}
	}
}
Пример #6
0
func main() {
	flag.Parse()
	filename := os.TempDir() + string(os.PathSeparator) + "gopacket_benchmark.pcap"
	if _, err := os.Stat(filename); err != nil {
		// This URL points to a publicly available packet data set from a DARPA
		// intrusion detection evaluation.  See
		// http://www.ll.mit.edu/mission/communications/cyber/CSTcorpora/ideval/data/1999/training/week1/index.html
		// for more details.
		fmt.Println("Local pcap file", filename, "doesn't exist, reading from", *url)
		if resp, err := http.Get(*url); err != nil {
			panic(err)
		} else if out, err := os.Create(filename); err != nil {
			panic(err)
		} else if gz, err := gzip.NewReader(resp.Body); err != nil {
			panic(err)
		} else if n, err := io.Copy(out, gz); err != nil {
			panic(err)
		} else if err := gz.Close(); err != nil {
			panic(err)
		} else if err := out.Close(); err != nil {
			panic(err)
		} else {
			fmt.Println("Successfully read", n, "bytes from url, unzipped to local storage")
		}
	}
	fmt.Println("Reading file once through to hopefully cache most of it")
	if f, err := os.Open(filename); err != nil {
		panic(err)
	} else if n, err := io.Copy(ioutil.Discard, f); err != nil {
		panic(err)
	} else if err := f.Close(); err != nil {
		panic(err)
	} else {
		fmt.Println("Read in file", filename, ", total of", n, "bytes")
	}
	if *cpuProfile != "" {
		if cpu, err := os.Create(*cpuProfile); err != nil {
			panic(err)
		} else if err := pprof.StartCPUProfile(cpu); err != nil {
			panic(err)
		} else {
			defer func() {
				pprof.StopCPUProfile()
				cpu.Close()
			}()
		}
	}
	var packetDataSource *BufferPacketSource
	var packetSource *gopacket.PacketSource
	fmt.Printf("Opening file %q for read\n", filename)
	if h, err := pcap.OpenOffline(filename); err != nil {
		panic(err)
	} else {
		fmt.Println("Reading all packets into memory with BufferPacketSource.")
		start := time.Now()
		packetDataSource = NewBufferPacketSource(h)
		duration := time.Since(start)
		fmt.Printf("Time to read packet data into memory from file: %v\n", duration)
		packetSource = gopacket.NewPacketSource(packetDataSource, h.LinkType())
		packetSource.DecodeOptions.Lazy = *decodeLazy
		packetSource.DecodeOptions.NoCopy = *decodeNoCopy
	}
	fmt.Println()
	for i := 0; i < *repeat; i++ {
		packetDataSource.Reset()
		fmt.Printf("Benchmarking decode %d/%d\n", i+1, *repeat)
		benchmarkPacketDecode(packetSource)
	}
	fmt.Println()
	for i := 0; i < *repeat; i++ {
		packetDataSource.Reset()
		fmt.Printf("Benchmarking decoding layer parser %d/%d\n", i+1, *repeat)
		benchmarkLayerDecode(packetDataSource, false)
	}
	fmt.Println()
	for i := 0; i < *repeat; i++ {
		packetDataSource.Reset()
		fmt.Printf("Benchmarking decoding layer parser with assembly %d/%d\n", i+1, *repeat)
		benchmarkLayerDecode(packetDataSource, true)
	}
}