func teardownPeer(t *testing.T, c *Client,
in *io.PipeReader, out *io.PipeWriter) {
// in.Close()
out.Close()
c.shares.halt()
os.RemoveAll(c.DownloadRoot)
}
func HandleRead(filename string, w *io.PipeWriter) {
fmt.Printf("Filename : %v \n", []byte(filename))
var exists bool
d, err := localConf.fs.Get("tftp/" + filename[0:len(filename)-1])
defer d.Close()
fmt.Println(d, err)
if err == nil {
exists = true
}
if exists {
// copy all the data into a buffer
data, err := ioutil.ReadAll(d)
if err != nil {
fmt.Fprintf(os.Stderr, "Copy Error : %v\n", err)
}
buf := bytes.NewBuffer(data)
c, e := io.Copy(w, buf)
d.Close()
if e != nil {
fmt.Fprintf(os.Stderr, "Can't send %s: %v\n", filename, e)
} else {
fmt.Fprintf(os.Stderr, "Sent %s (%d bytes)\n", filename, c)
}
w.Close()
} else {
w.CloseWithError(fmt.Errorf("File not exists: %s", filename))
}
}
// We overload the Wait() method to enable subprocess termination if a
// timeout has been exceeded.
func (mc *ManagedCmd) Wait() (err error) {
go func() {
mc.done <- mc.Cmd.Wait()
}()
if mc.timeout_duration != 0 {
select {
case <-mc.Stopchan:
err = fmt.Errorf("CommandChain was stopped with error: [%s]", mc.kill())
case <-time.After(mc.timeout_duration):
err = fmt.Errorf("CommandChain timedout with error: [%s]", mc.kill())
case err = <-mc.done:
}
} else {
select {
case <-mc.Stopchan:
err = fmt.Errorf("CommandChain was stopped with error: [%s]", mc.kill())
case err = <-mc.done:
}
}
var writer *io.PipeWriter
var ok bool
writer, ok = mc.Stdout.(*io.PipeWriter)
if ok {
writer.Close()
}
writer, ok = mc.Stderr.(*io.PipeWriter)
if ok {
writer.Close()
}
return err
}
// decode decompresses bytes from r and writes them to pw.
// read specifies how to decode bytes into codes.
// litWidth is the width in bits of literal codes.
func decode(r io.Reader, read func(*decoder) (uint16, os.Error), litWidth int, pw *io.PipeWriter) {
br, ok := r.(io.ByteReader)
if !ok {
br = bufio.NewReader(r)
}
pw.CloseWithError(decode1(pw, br, read, uint(litWidth)))
}
func (donut API) mergeMultipart(parts *CompleteMultipartUpload, uploadID string, fullObjectWriter *io.PipeWriter) {
for _, part := range parts.Part {
recvMD5 := part.ETag
object, ok := donut.multiPartObjects[uploadID].Get(part.PartNumber)
if ok == false {
fullObjectWriter.CloseWithError(probe.WrapError(probe.NewError(InvalidPart{})))
return
}
calcMD5Bytes := md5.Sum(object)
// complete multi part request header md5sum per part is hex encoded
recvMD5Bytes, err := hex.DecodeString(strings.Trim(recvMD5, "\""))
if err != nil {
fullObjectWriter.CloseWithError(probe.WrapError(probe.NewError(InvalidDigest{Md5: recvMD5})))
return
}
if !bytes.Equal(recvMD5Bytes, calcMD5Bytes[:]) {
fullObjectWriter.CloseWithError(probe.WrapError(probe.NewError(BadDigest{})))
return
}
if _, err := io.Copy(fullObjectWriter, bytes.NewReader(object)); err != nil {
fullObjectWriter.CloseWithError(probe.WrapError(probe.NewError(err)))
return
}
object = nil
}
fullObjectWriter.Close()
return
}
func encode(r io.Reader, pw *io.PipeWriter) {
br, ok := r.(io.ByteReader)
if !ok {
br = bufio.NewReader(r)
}
pw.CloseWithError(encode1(pw, br))
}
func StreamWriteMultipartForm(params map[string]string, fileField, path, boundary string, pw *io.PipeWriter, buf *bytes.Buffer) {
defer pw.Close()
mpw := multipart.NewWriter(pw)
mpw.SetBoundary(boundary)
if fileField != "" && path != "" {
fw, err := mpw.CreateFormFile(fileField, filepath.Base(path))
if err != nil {
log.Fatal(err)
return
}
if buf != nil {
_, err = io.Copy(fw, buf)
if err != nil {
log.Fatal(err)
return
}
}
}
for key, val := range params {
_ = mpw.WriteField(key, val)
}
err := mpw.Close()
if err != nil {
log.Fatal(err)
return
}
}
// Streams upload directly from file -> mime/multipart -> pipe -> http-request
func streamingUploadFile(params map[string]string, paramName, path string, w *io.PipeWriter, file *os.File) {
defer file.Close()
defer w.Close()
writer := multipart.NewWriter(w)
part, err := writer.CreateFormFile(paramName, filepath.Base(path))
if err != nil {
log.Fatal(err)
return
}
_, err = io.Copy(part, file)
if err != nil {
log.Fatal(err)
return
}
for key, val := range params {
_ = writer.WriteField(key, val)
}
err = writer.Close()
if err != nil {
log.Fatal(err)
return
}
}
// Encode the file and request parameters in a multipart body.
// File contents are streamed into the request using an io.Pipe in a separated goroutine
func streamUploadBody(client *FlickrClient, photo io.Reader, body *io.PipeWriter, fileName string, boundary string) {
// multipart writer to fill the body
defer body.Close()
writer := multipart.NewWriter(body)
writer.SetBoundary(boundary)
// create the "photo" field
part, err := writer.CreateFormFile("photo", filepath.Base(fileName))
if err != nil {
log.Fatal(err)
return
}
// fill the photo field
_, err = io.Copy(part, photo)
if err != nil {
log.Fatal(err)
return
}
// dump other params
for key, val := range client.Args {
_ = writer.WriteField(key, val[0])
}
// close the form writer
err = writer.Close()
if err != nil {
log.Fatal(err)
return
}
}
// startReading starts a goroutine receiving the lines out of the reader
// in the background and passing them to a created string channel. This
// will used in the assertions.
func startReading(c *gc.C, tailer *tailer.Tailer, reader *io.PipeReader, writer *io.PipeWriter) chan string {
linec := make(chan string)
// Start goroutine for reading.
go func() {
defer close(linec)
reader := bufio.NewReader(reader)
for {
line, err := reader.ReadString('\n')
switch err {
case nil:
linec <- line
case io.EOF:
return
default:
c.Fail()
}
}
}()
// Close writer when tailer is stopped or has an error. Tailer using
// components can do it the same way.
go func() {
tailer.Wait()
writer.Close()
}()
return linec
}
func encode(out *io.PipeWriter, in io.ReadCloser, enc string, level int) {
var (
e encoder
err error
)
defer func() {
if e != nil {
e.Close()
}
if err == nil {
err = io.EOF
}
out.CloseWithError(err)
in.Close()
}()
if level == flate.BestSpeed {
pool := encoderPool(enc)
pe := pool.Get()
if pe != nil {
e = pe.(encoder)
defer pool.Put(pe)
}
}
if e == nil {
e, err = newEncoder(enc, level)
if err != nil {
return
}
}
e.Reset(out)
b := make([]byte, bufferSize)
for {
n, rerr := in.Read(b)
if n > 0 {
_, err = e.Write(b[:n])
if err != nil {
break
}
err = e.Flush()
if err != nil {
break
}
}
if rerr != nil {
err = rerr
break
}
}
}
func (s *GardenServer) streamProcess(logger lager.Logger, conn net.Conn, process garden.Process, stdinPipe *io.PipeWriter, connCloseCh chan struct{}) {
statusCh := make(chan int, 1)
errCh := make(chan error, 1)
go func() {
status, err := process.Wait()
if err != nil {
logger.Error("wait-failed", err, lager.Data{
"id": process.ID(),
})
errCh <- err
} else {
logger.Info("exited", lager.Data{
"status": status,
"id": process.ID(),
})
statusCh <- status
}
}()
for {
select {
case status := <-statusCh:
transport.WriteMessage(conn, &transport.ProcessPayload{
ProcessID: process.ID(),
ExitStatus: &status,
})
stdinPipe.Close()
return
case err := <-errCh:
e := err.Error()
transport.WriteMessage(conn, &transport.ProcessPayload{
ProcessID: process.ID(),
Error: &e,
})
stdinPipe.Close()
return
case <-s.stopping:
logger.Debug("detaching", lager.Data{
"id": process.ID(),
})
return
case <-connCloseCh:
return
}
}
}
func PipeWriter(data map[string]interface{}) {
w := io.PipeWriter{}
defer w.Close()
w.Write([]byte("pipeWriter"))
// err := tpl.Execute(w, data)
// if err != nil {
// fmt.Println(err)
// }
}
func checkRequestEnd(w *io.PipeWriter, c io.Reader) {
req, err := http.ReadRequest(bufio.NewReaderSize(io.TeeReader(c, w), h2FrameSize))
if err != nil {
w.CloseWithError(err)
return
}
defer req.Body.Close()
_, err = io.Copy(ioutil.Discard, req.Body)
w.CloseWithError(err)
}
func (s *GardenServer) streamInput(decoder *json.Decoder, in *io.PipeWriter, process garden.Process, connCloseCh chan struct{}) {
for {
var payload transport.ProcessPayload
err := decoder.Decode(&payload)
if err != nil {
close(connCloseCh)
in.CloseWithError(errors.New("Connection closed"))
return
}
switch {
case payload.TTY != nil:
process.SetTTY(*payload.TTY)
case payload.Source != nil:
if payload.Data == nil {
in.Close()
return
} else {
_, err := in.Write([]byte(*payload.Data))
if err != nil {
return
}
}
case payload.Signal != nil:
s.logger.Info("stream-input-process-signal", lager.Data{"payload": payload})
switch *payload.Signal {
case garden.SignalKill:
err = process.Signal(garden.SignalKill)
if err != nil {
s.logger.Error("stream-input-process-signal-kill-failed", err, lager.Data{"payload": payload})
}
case garden.SignalTerminate:
err = process.Signal(garden.SignalTerminate)
if err != nil {
s.logger.Error("stream-input-process-signal-terminate-failed", err, lager.Data{"payload": payload})
}
default:
s.logger.Error("stream-input-unknown-process-payload-signal", nil, lager.Data{"payload": payload})
in.Close()
return
}
default:
s.logger.Error("stream-input-unknown-process-payload", nil, lager.Data{"payload": payload})
in.Close()
return
}
}
}
func (c *compressed) reset() {
var w *io.PipeWriter
c.r, w = io.Pipe()
c.wg.Add(1)
go func() {
defer c.wg.Done()
compressor := isolated.GetCompressor(w)
_, err := io.Copy(compressor, c.src)
if err2 := compressor.Close(); err == nil {
err = err2
}
w.CloseWithError(err)
}()
}
func sendSnapFile(snapPath string, snapFile *os.File, pw *io.PipeWriter, mw *multipart.Writer, action *actionData) {
defer snapFile.Close()
if action.SnapOptions == nil {
action.SnapOptions = &SnapOptions{}
}
errs := []error{
mw.WriteField("action", action.Action),
mw.WriteField("name", action.Name),
mw.WriteField("snap-path", action.SnapPath),
mw.WriteField("channel", action.Channel),
mw.WriteField("devmode", strconv.FormatBool(action.DevMode)),
}
for _, err := range errs {
if err != nil {
pw.CloseWithError(err)
return
}
}
fw, err := mw.CreateFormFile("snap", filepath.Base(snapPath))
if err != nil {
pw.CloseWithError(err)
return
}
_, err = io.Copy(fw, snapFile)
if err != nil {
pw.CloseWithError(err)
return
}
mw.Close()
pw.Close()
}
// Streams upload directly from file -> mime/multipart -> pipe -> http-request
func manageStream(dst *io.PipeWriter, src io.Reader) error {
// Close the stream when the job is done
defer dst.Close()
// Copy
n, err := io.Copy(dst, src)
fmt.Println(n)
if err != nil {
return err
}
return err
}
func cleanup(p1, p2 *io.PipeWriter, stdinCh, stderrCh chan error) error {
p1.Close()
p2.Close()
if stdinCh != nil {
if err := <-stdinCh; err != nil {
return err
}
}
if stderrCh != nil {
if err := <-stderrCh; err != nil {
return err
}
}
return nil
}
func (s *Sequence) done(p1, p2 *io.PipeWriter, stdinCh, stderrCh chan error) error {
p1.Close()
p2.Close()
defer s.reset()
if stdinCh != nil {
if err := <-stdinCh; err != nil {
return err
}
}
if stderrCh != nil {
if err := <-stderrCh; err != nil {
return err
}
}
return nil
}
func logHandler(name string, debug bool, actionFunc func(http.ResponseWriter, *http.Request)) func(http.ResponseWriter, *http.Request) {
return func(w http.ResponseWriter, r *http.Request) {
if debug {
buf := new(bytes.Buffer)
io.Copy(buf, r.Body)
log.Debugf("Dispatching %s with %v", name, strings.TrimSpace(string(buf.Bytes())))
var writer *io.PipeWriter
r.Body, writer = io.Pipe()
go func() {
io.Copy(writer, buf)
writer.Close()
}()
}
actionFunc(w, r)
}
}
func newMultipartReader(parts []typeReader) *multipartReader {
mp := &multipartReader{pipeOpen: true}
var pw *io.PipeWriter
mp.pr, pw = io.Pipe()
mpw := multipart.NewWriter(pw)
mp.ctype = "multipart/related; boundary=" + mpw.Boundary()
go func() {
for _, part := range parts {
w, err := mpw.CreatePart(typeHeader(part.typ))
if err != nil {
mpw.Close()
pw.CloseWithError(fmt.Errorf("googleapi: CreatePart failed: %v", err))
return
}
_, err = io.Copy(w, part.Reader)
if err != nil {
mpw.Close()
pw.CloseWithError(fmt.Errorf("googleapi: Copy failed: %v", err))
return
}
}
mpw.Close()
pw.Close()
}()
return mp
}
// secReadLoop copies data from r into pw
// doing a nacl open decryption on the data in the process using shared as the key
func secReadLoop(r io.Reader, pw *io.PipeWriter, shared *[32]byte) {
var failed bool
// check for an error, stops the loop and
// closes the pipe with err to signal the reader we failed
var check = func(err error) {
if err != nil {
log.Println("secReadLoop err:", err)
if err2 := pw.CloseWithError(err); err2 != nil {
log.Println("CloseWithError failed", err2)
}
failed = true
}
}
for !failed { // until an error occurs
// read next ciphered message from the passed reader
msg := make([]byte, 32*1024)
n, err := io.ReadAtLeast(r, msg, 25)
// the closed conn check could be nicer but there is no way to access the abstracted TCPConn cleanly with the pipes involved
if err != nil && (err == io.EOF || strings.Contains(err.Error(), "use of closed network connection")) {
checkFatal(pw.Close())
return
}
check(err)
// slice of the unused rest of the buffer
msg = msg[:n]
// copy the nonce from the message
var nonce [24]byte
copy(nonce[:], msg[:24])
// cut of the nonce
msg = msg[24:]
// decrypt message
clearMsg, ok := box.OpenAfterPrecomputation([]byte{}, msg, &nonce, shared)
if !ok {
check(errors.New("open failed"))
}
// copy the decrypted message to our pipe
_, err = io.Copy(pw, bytes.NewReader(clearMsg))
check(err)
}
}
// HandleRequest ..
func HandleRequest(api *api.API, body io.Reader, bodyWriter *io.PipeWriter, ip string) error {
defer func() {
_ = bodyWriter.Close()
}()
omahaReq, err := readOmahaRequest(body)
if err != nil {
logger.Warn("HandleRequest problem with readOmahaRequest", "error", err.Error())
return ErrMalformedRequest
}
omahaResp, err := buildOmahaResponse(api, omahaReq, ip)
if err != nil {
logger.Warn("HandleRequest problem with buildOmahaResponse", "error", err.Error())
return ErrMalformedResponse
}
return writeXMLResponse(bodyWriter, omahaResp)
}
func readDat(filename string, c chan io.Reader) {
f, err := os.Open("testdata/webkit/" + filename)
if err != nil {
c <- pipeErr(err)
return
}
defer f.Close()
// Loop through the lines of the file. Each line beginning with "#" denotes
// a new section, which is returned as a separate io.Reader.
r := bufio.NewReader(f)
var pw *io.PipeWriter
for {
line, err := r.ReadSlice('\n')
if err != nil {
if pw != nil {
pw.CloseWithError(err)
pw = nil
} else {
c <- pipeErr(err)
}
return
}
if len(line) == 0 {
continue
}
if line[0] == '#' {
if pw != nil {
pw.Close()
}
var pr *io.PipeReader
pr, pw = io.Pipe()
c <- pr
continue
}
if line[0] != '|' {
// Strip the trailing '\n'.
line = line[:len(line)-1]
}
if pw != nil {
if _, err := pw.Write(line); err != nil {
pw.CloseWithError(err)
pw = nil
}
}
}
}
func sqlplusWrite(pw *io.PipeWriter) {
var err error
defer func() {
pw.CloseWithError(err)
}()
err = sqlplusFormatOutput(pw)
if err != nil {
return
}
for _, p := range sqlplusParsers {
_, err = io.WriteString(pw, p.query)
if err != nil {
return
}
}
err = sqlplusExit(pw)
}
// Streams upload directly from file -> mime/multipart -> pipe -> http-request
func streamingUploadFile(id, field, path, store string, w *io.PipeWriter, file io.Reader) {
// defer file.Close()
defer w.Close()
writer := multipart.NewWriter(w)
part, err := writer.CreateFormFile("file", filepath.Base(path))
if err != nil {
log.Fatal("err", "err", err)
return
}
_, err = io.Copy(part, file)
if err != nil {
log.Fatal("err", "err", err)
return
}
err = writer.Close()
if err != nil {
log.Fatal("err", "err", err)
return
}
}
func (c *combinedReader) readTo(r io.Reader, w *io.PipeWriter) {
p := make([]byte, 1e5)
for {
n, err := r.Read(p)
if n > 0 {
c.wlk.Lock()
w.Write(p[:n])
c.wlk.Unlock()
}
if err != nil {
c.wlk.Lock()
defer c.wlk.Unlock()
c.closed++
if c.closed == 2 {
w.Close()
}
return
}
}
}
// We overload the Wait() method to enable subprocess termination if a
// timeout has been exceeded.
func (mc *ManagedCmd) Wait() (err error) {
go func() {
mc.done <- mc.Cmd.Wait()
}()
done := false
if mc.timeout_duration != 0 {
for !done {
select {
case <-mc.Stopchan:
err = fmt.Errorf("ManagedCmd was stopped with error: [%s]", mc.kill())
done = true
case <-time.After(mc.timeout_duration):
mc.Stopchan <- true
err = fmt.Errorf("ManagedCmd timedout")
case err = <-mc.done:
done = true
}
}
} else {
select {
case <-mc.Stopchan:
err = fmt.Errorf("ManagedCmd was stopped with error: [%s]", mc.kill())
case err = <-mc.done:
}
}
var writer *io.PipeWriter
var ok bool
writer, ok = mc.Stdout.(*io.PipeWriter)
if ok {
writer.Close()
}
writer, ok = mc.Stderr.(*io.PipeWriter)
if ok {
writer.Close()
}
return err
}
// streamingUpload streams a file via a pipe through a multipart.Writer.
// Generally one should use newStreamingUpload instead of calling this directly.
func streamingUpload(file *os.File, fileName string, postBodyWriter *multipart.Writer, w *io.PipeWriter) {
defer GinkgoRecover()
defer file.Close()
defer w.Close()
// Set up the form file
fileWriter, err := postBodyWriter.CreateFormFile("file", fileName)
if err != nil {
Failf("Unable to to write file at %s to buffer. Error: %s", fileName, err)
}
// Copy kubectl binary into the file writer
if _, err := io.Copy(fileWriter, file); err != nil {
Failf("Unable to to copy file at %s into the file writer. Error: %s", fileName, err)
}
// Nothing more should be written to this instance of the postBodyWriter
if err := postBodyWriter.Close(); err != nil {
Failf("Unable to close the writer for file upload. Error: %s", err)
}
}
