Пример #1
0
// dialContext connects to the address on the named network.
func dialContext(ctx context.Context, network, address string) (net.Conn, error) {
	var dialer net.Dialer
	if deadline, ok := ctx.Deadline(); ok {
		dialer.Timeout = deadline.Sub(time.Now())
	}
	return dialer.Dial(network, address)
}
Пример #2
0
// We accept 'ssl'/'tls' as a protocol; it implies 'tcp' as the underlying
// protocol.
func dial(proto, addr, laddr string, tmout time.Duration) (net.Conn, error) {
	// Set up our dialer options; we may need a local address and/or
	// a connection timeout.
	// TODO: happy eyeballs support, ie dialer.DualStack? This might be
	// worth a command line switch.
	var dialer net.Dialer
	dialer.Timeout = tmout
	if laddr != "" {
		a, e := ResolveAddr(proto, laddr)
		if e != nil {
			return nil, e
		}
		dialer.LocalAddr = a
	}

	switch proto {
	case "ssl", "tls":
		// For testing I do not want to have to verify anything
		// about the target certificates. I have other tools for
		// that.
		cfg := tls.Config{InsecureSkipVerify: true}
		return tls.DialWithDialer(&dialer, "tcp", addr, &cfg)
	case "sslver", "tlsver":
		return tls.DialWithDialer(&dialer, "tcp", addr, nil)
	}
	return dialer.Dial(proto, addr)
}
Пример #3
0
// checkSourceURI performs a check on the URI associated with the build
// to make sure that it is valid.  It also optionally tests the connection
// to the source uri.
func checkSourceURI(git git.Git, rawurl string, testConnection bool, timeout time.Duration) error {
	if !git.ValidCloneSpec(rawurl) {
		return fmt.Errorf("Invalid git source url: %s", rawurl)
	}
	if strings.HasPrefix(rawurl, "git@") || strings.HasPrefix(rawurl, "git://") {
		return nil
	}
	srcURL, err := url.Parse(rawurl)
	if err != nil {
		return err
	}
	if !testConnection {
		return nil
	}
	host := srcURL.Host
	if strings.Index(host, ":") == -1 {
		switch srcURL.Scheme {
		case "http":
			host += ":80"
		case "https":
			host += ":443"
		}
	}
	dialer := net.Dialer{Timeout: timeout}
	conn, err := dialer.Dial("tcp", host)
	if err != nil {
		return err
	}
	return conn.Close()
}
Пример #4
0
func (conn *Connection) Loop() {
	dialer := net.Dialer{Timeout: DialTimeout}
	conn.State = CsDialing
	if netconn, err := dialer.Dial(conn.Network, conn.Address); err != nil {
		conn.ConnErr <- Error{conn, Dial, err}
		conn.State = CsClosed
	} else {
		conn.conn = netconn.(nt.NetConn)
		conn.reader.Init(conn.conn, conn.ReadTimeout, conn.RetCodeType)
		conn.writer.Init(conn.conn, conn.WriteTimeout, conn.RetCodeType)
		if err = conn.writer.Ping(); err == nil {
			if err = conn.writer.Flush(); err == nil {
				err = conn.reader.ReadPing()
			}
		}
		if err != nil {
			conn.conn.Close()
			conn.ConnErr <- Error{conn, Dial, err}
			conn.State = CsClosed
			return
		}
		conn.ConnErr <- Error{conn, Dial, nil}
		conn.State = CsConnected
		go conn.readLoop()
		go conn.writeLoop()
		go conn.controlLoop()
	}
}
Пример #5
0
// sendState is used to initiate a push/pull over TCP with a remote node
func (m *Memberlist) sendAndReceiveState(addr []byte, port uint16, join bool) ([]pushNodeState, []byte, error) {
	// Attempt to connect
	dialer := net.Dialer{Timeout: m.config.TCPTimeout}
	dest := net.TCPAddr{IP: addr, Port: int(port)}
	conn, err := dialer.Dial("tcp", dest.String())
	if err != nil {
		return nil, nil, err
	}
	defer conn.Close()
	m.logger.Printf("[DEBUG] memberlist: Initiating push/pull sync with: %s", conn.RemoteAddr())
	metrics.IncrCounter([]string{"memberlist", "tcp", "connect"}, 1)

	// Send our state
	if err := m.sendLocalState(conn, join); err != nil {
		return nil, nil, err
	}

	// Read remote state
	_, remote, userState, err := m.readRemoteState(conn)
	if err != nil {
		err := fmt.Errorf("Reading remote state failed: %v", err)
		return nil, nil, err
	}

	// Return the remote state
	return remote, userState, nil
}
Пример #6
0
// checkSourceURI performs a check on the URI associated with the build
// to make sure that it is live before proceeding with the build.
func (d *DockerBuilder) checkSourceURI() error {
	rawurl := d.build.Spec.Source.Git.URI
	if !d.git.ValidCloneSpec(rawurl) {
		return fmt.Errorf("Invalid git source url: %s", rawurl)
	}
	if strings.HasPrefix(rawurl, "git://") || strings.HasPrefix(rawurl, "git@") {
		return nil
	}
	if !strings.HasPrefix(rawurl, "http://") && !strings.HasPrefix(rawurl, "https://") {
		rawurl = fmt.Sprintf("https://%s", rawurl)
	}
	srcURL, err := url.Parse(rawurl)
	if err != nil {
		return err
	}
	host := srcURL.Host
	if strings.Index(host, ":") == -1 {
		switch srcURL.Scheme {
		case "http":
			host += ":80"
		case "https":
			host += ":443"
		}
	}
	dialer := net.Dialer{Timeout: d.urlTimeout}
	conn, err := dialer.Dial("tcp", host)
	if err != nil {
		return err
	}
	return conn.Close()

}
Пример #7
0
// DialTCPSAddrTimeout 同 DialTCPSAddr 函数,增加了超时功能
func (p *directProxyClient) DialTCPSAddrTimeout(network string, raddr string, timeout time.Duration) (rconn ProxyTCPConn, rerr error) {
	switch network {
	case "tcp", "tcp4", "tcp6":
	default:
		return nil, fmt.Errorf("不支持的 network 类型:%v", network)
	}
	d := net.Dialer{Timeout: timeout, LocalAddr: &p.TCPLocalAddr}
	conn, err := d.Dial(network, raddr)
	if err != nil {
		return nil, err
	}

	splitHttp := false
	if p.splitHttp {
		raddr, err := net.ResolveTCPAddr(network, raddr)
		if err == nil && raddr.Port == 80 {
			splitHttp = true
		}
	}
	wTime := time.Time{}
	if p.sleep != 0 {
		wTime = time.Now()
		wTime = wTime.Add(p.sleep)
	}

	if tcpConn, ok := conn.(*net.TCPConn); ok {
		return &directTCPConn{*tcpConn, splitHttp, wTime, p}, nil
	}
	return nil, fmt.Errorf("内部错误")
}
Пример #8
0
func do_axfr(zone_name string) ([]dns.RR, error) {
	result := []dns.RR{}
	message := new(dns.Msg)
	message.SetAxfr(zone_name)
	transfer := &dns.Transfer{DialTimeout: conf.Query_timeout, ReadTimeout: conf.Query_timeout}
	if conf.Transfer_source != nil {
		d := net.Dialer{LocalAddr: conf.Transfer_source}
		c, err := d.Dial("tcp", conf.Master)
		if err != nil {
			logger.Debug("AXFR ERROR : problem dialing master")
			return result, err
		}
		dnscon := &dns.Conn{Conn: c}
		transfer = &dns.Transfer{Conn: dnscon, DialTimeout: conf.Query_timeout, ReadTimeout: conf.Query_timeout}
	}

	channel, err := transfer.In(message, conf.Master)
	if err != nil {
		return result, err
	}

	for envelope := range channel {
		result = append(result, envelope.RR...)
	}
	return result, nil
}
Пример #9
0
func get_serial(zone_name, query_dest string) (uint32, error) {
	var in *dns.Msg
	m := new(dns.Msg)
	m.SetQuestion(zone_name, dns.TypeSOA)

	if conf.Transfer_source != nil {
		d := net.Dialer{LocalAddr: conf.Transfer_source}
		c, err := d.Dial("tcp", query_dest)
		if err != nil {
			logger.Error(fmt.Sprintf("QUERY ERROR : problem dialing query_dest %s", query_dest))
			return 0, err
		}
		co := &dns.Conn{Conn: c}
		co.WriteMsg(m)
		in, err = co.ReadMsg()
		if err != nil {
			logger.Error(fmt.Sprintf("QUERY ERROR : problem querying query_dest %s", query_dest))
			return 0, err
		}
		co.Close()
	} else {
		c := &dns.Client{DialTimeout: conf.Query_timeout, ReadTimeout: conf.Query_timeout}
		if conf.All_tcp == true {
			c.Net = "tcp"
		}
		// _ is query time, might be useful later
		var err error
		in, _, err = c.Exchange(m, query_dest)
		if err != nil {
			logger.Error(fmt.Sprintf("QUERY ERROR : problem querying query_dest %s", query_dest))
			return 0, err
		}
	}
	return serial_query_parse(in), nil
}
Пример #10
0
// sendAndReceiveState is used to initiate a push/pull over TCP with a remote node
func (m *Memberlist) sendAndReceiveState(addr []byte, port uint16, join bool) ([]pushNodeState, []byte, error) {
	// Attempt to connect
	dialer := net.Dialer{Timeout: m.config.TCPTimeout}
	dest := net.TCPAddr{IP: addr, Port: int(port)}
	conn, err := dialer.Dial("tcp", dest.String())
	if err != nil {
		return nil, nil, err
	}
	defer conn.Close()
	m.logger.Printf("[DEBUG] memberlist: Initiating push/pull sync with: %s", conn.RemoteAddr())
	metrics.IncrCounter([]string{"memberlist", "tcp", "connect"}, 1)

	// Send our state
	if err := m.sendLocalState(conn, join); err != nil {
		return nil, nil, err
	}

	conn.SetDeadline(time.Now().Add(m.config.TCPTimeout))
	msgType, bufConn, dec, err := m.readTCP(conn)
	if err != nil {
		return nil, nil, err
	}

	// Quit if not push/pull
	if msgType != pushPullMsg {
		err := fmt.Errorf("received invalid msgType (%d), expected pushPullMsg (%d) %s", msgType, pushPullMsg, LogConn(conn))
		return nil, nil, err
	}

	// Read remote state
	_, remoteNodes, userState, err := m.readRemoteState(bufConn, dec)
	return remoteNodes, userState, err
}
Пример #11
0
// tlsDial wraps either net.Dial or crypto/tls.Dial, depending on the contents of
// the passed TLS Config.
func tlsDial(network, address string, timeout time.Duration, config *tls.Config) (net.Conn, error) {
	defaultDialer := net.Dialer{Timeout: timeout}
	if config == nil {
		return defaultDialer.Dial(network, address)
	}
	return tls.DialWithDialer(&defaultDialer, network, address, config)
}
Пример #12
0
func NewHttpsWriter(outputUrl *url.URL, appId string, skipCertVerify bool, dialer *net.Dialer, timeout time.Duration) (w *httpsWriter, err error) {
	if dialer == nil {
		return nil, errors.New("cannot construct a writer with a nil dialer")
	}

	if outputUrl.Scheme != "https" {
		return nil, errors.New(fmt.Sprintf("Invalid scheme %s, httpsWriter only supports https", outputUrl.Scheme))
	}
	tlsConfig := &tls.Config{InsecureSkipVerify: skipCertVerify}
	tr := &http.Transport{
		MaxIdleConnsPerHost: 1,
		TLSClientConfig:     tlsConfig,
		TLSHandshakeTimeout: dialer.Timeout * 2,
		Dial: func(network, addr string) (net.Conn, error) {
			return dialer.Dial(network, addr)
		},
	}
	client := &http.Client{Transport: tr, Timeout: timeout}
	return &httpsWriter{
		appId:     appId,
		outputUrl: outputUrl,
		tlsConfig: tlsConfig,
		client:    client,
	}, nil
}
Пример #13
0
// sendTCPUserMsg is used to send a TCP userMsg to another host
func (m *Memberlist) sendTCPUserMsg(to net.Addr, sendBuf []byte) error {
	dialer := net.Dialer{Timeout: m.config.TCPTimeout}
	conn, err := dialer.Dial("tcp", to.String())
	if err != nil {
		return err
	}
	defer conn.Close()

	bufConn := bytes.NewBuffer(nil)

	if err := bufConn.WriteByte(byte(userMsg)); err != nil {
		return err
	}

	// Send our node state
	header := userMsgHeader{UserMsgLen: len(sendBuf)}
	hd := codec.MsgpackHandle{}
	enc := codec.NewEncoder(bufConn, &hd)

	if err := enc.Encode(&header); err != nil {
		return err
	}

	if _, err := bufConn.Write(sendBuf); err != nil {
		return err
	}

	return m.rawSendMsgTCP(conn, bufConn.Bytes())
}
Пример #14
0
// NewVersionedClient returns a Client instance ready for communication with
// the given server endpoint
func NewClient(endpoint string) (*Client, error) {
	var httpClient *http.Client
	var dialFunc func(network, addr string) (net.Conn, error)

	u, err := url.Parse(endpoint)

	if err != nil {
		return nil, ErrInvalidEndpoint
	}

	if u.Scheme == "unix" {
		d := net.Dialer{}
		dialFunc = func(network, addr string) (net.Conn, error) {
			return d.Dial("unix", u.Path)
		}
		httpClient = &http.Client{
			Transport: &http.Transport{
				Dial: dialFunc,
			},
		}
	} else {
		httpClient = http.DefaultClient
	}

	return &Client{
		httpClient:  httpClient,
		endpoint:    endpoint,
		endpointURL: u,
		dialer:      dialFunc,
	}, nil
}
Пример #15
0
// Read addresses from addrChan and grab banners from these hosts.
// Sends resultStructs to resultChan.  Writes to doneChan when complete.
func grabber(addrChan chan string, resultChan chan resultStruct, doneChan chan int) {
	for addr := range addrChan {
		deadline := time.Now().Add(time.Duration(*timeoutFlag) * time.Second)
		dialer := net.Dialer{Deadline: deadline}
		conn, err := dialer.Dial("tcp", net.JoinHostPort(addr, *portFlag))
		if err != nil {
			resultChan <- resultStruct{addr, nil, err}
			continue
		}
		conn.SetDeadline(deadline)
		if len(messageData) > 0 {
			s := strings.Replace(string(messageData), "%s", addr, -1)
			if _, err := conn.Write([]byte(s)); err != nil {
				conn.Close()
				resultChan <- resultStruct{addr, nil, err}
				continue
			}
		}
		var buf [1024]byte
		n, err := conn.Read(buf[:])
		conn.Close()
		if err != nil && (err != io.EOF || n == 0) {
			resultChan <- resultStruct{addr, nil, err}
			continue
		}
		resultChan <- resultStruct{addr, buf[0:n], nil}
	}
	doneChan <- 1
}
Пример #16
0
// sendState is used to initiate a push/pull over TCP with a remote node
func (m *Memberlist) sendAndReceiveState(addr []byte) ([]pushNodeState, []byte, error) {
	// Attempt to connect
	dialer := net.Dialer{Timeout: m.config.TCPTimeout}
	dest := net.TCPAddr{IP: addr, Port: m.config.TCPPort}
	conn, err := dialer.Dial("tcp", dest.String())
	if err != nil {
		return nil, nil, err
	}
	defer conn.Close()
	m.logger.Printf("[INFO] Initiating push/pull sync with: %s", conn.RemoteAddr())

	// Send our state
	if err := m.sendLocalState(conn); err != nil {
		return nil, nil, err
	}

	// Read remote state
	remote, userState, err := m.readRemoteState(conn)
	if err != nil {
		err := fmt.Errorf("Reading remote state failed: %v", err)
		return nil, nil, err
	}

	// Return the remote state
	return remote, userState, nil
}
Пример #17
0
// DialWithDialer is shorthand for using dialer.Dial() then NewConnection()
func DialWithDialer(dialer *net.Dialer, network, addr string, opts ...ConnectionOption) (c Connection, err error) {
	conn, err := dialer.Dial(network, addr)
	if err == nil {
		c, err = NewConnection(conn, opts...)
	}
	return
}
Пример #18
0
func NewClient(originURL, targetURL string, settings map[string]interface{}) (c *websocket.Conn, response *http.Response, err error) {
	u, err := url.Parse(targetURL)
	if err != nil {
		return nil, nil, err
	}

	dialer := net.Dialer{}

	timeoutInterface, ok := settings["Timeout"]
	if ok {
		dialer.Timeout = timeoutInterface.(time.Duration)
	}

	keepAliveInterface, ok := settings["KeepAlive"]
	if ok {
		dialer.KeepAlive = keepAliveInterface.(time.Duration)
	}

	rawConn, err := dialer.Dial("tcp", u.Host)
	if err != nil {
		logrus.WithFields(logrus.Fields{
			"Error": err.Error(),
		}).Errorf("TCP connection error when dialing %v", u.Host)

		return nil, nil, err
	}

	wsHeaders := http.Header{
		"Origin": {originURL},
		// your milage may differ
		"Sec-WebSocket-Extensions": {"permessage-deflate; client_max_window_bits, x-webkit-deflate-frame"},
	}

	return websocket.NewClient(rawConn, u, wsHeaders, 1024, 1024)
}
Пример #19
0
func (p *peer) connect() error {
	var dialer net.Dialer
	var backoff = backoff{Max: 10 * time.Second}
	for {
		dialer.Deadline = time.Now().Add(3 * time.Second)

		if p.sock.debug {
			println("Connecting", p.network, p.address, dialer.Deadline.String())
		}
		conn, err := dialer.Dial(p.network, p.address)
		if err != nil {
			backoff.Wait()
			continue
		}

		p.conn = conn
		if p.sock.debug {
			fmt.Printf("\nConnected %s (%s) <-> %s (%s)..\n",
				conn.LocalAddr(), p.sock.ident,
				conn.RemoteAddr(), p.ident)
		}
		break
	}
	return nil
}
Пример #20
0
// NewRemotePassAuthRunnerWithTimeouts is one of functions for creating remote
// runner. Use this one instead of NewRemotePassAuthRunner if you need to setup
// nondefault timeouts for ssh connection
func NewRemotePassAuthRunnerWithTimeouts(
	user, host, password string, timeouts Timeouts,
) (*Remote, error) {
	config := &ssh.ClientConfig{
		User: user,
		Auth: []ssh.AuthMethod{ssh.Password(password)},
	}

	dialer := net.Dialer{
		Timeout:   timeouts.ConnectionTimeout,
		Deadline:  time.Now().Add(timeouts.ConnectionTimeout),
		KeepAlive: timeouts.KeepAlive,
	}

	conn, err := dialer.Dial("tcp", host)
	if err != nil {
		return nil, err
	}

	connection := &timeBoundedConnection{
		Conn:         conn,
		readTimeout:  timeouts.SendTimeout,
		writeTimeout: timeouts.ReceiveTimeout,
	}

	sshConnection, channels, requests, err := ssh.NewClientConn(
		connection, host, config,
	)
	if err != nil {
		return nil, err
	}

	return &Remote{ssh.NewClient(sshConnection, channels, requests)}, nil
}
Пример #21
0
// Connects to a Riak server.
func (c *Client) Connect() error {
	d := new(net.Dialer)
	if c.connTimeout > 0 {
		d.Timeout = c.connTimeout
	}
	return c.tcpConnect(d)
}
Пример #22
0
// DialWithDialer connects to the fcgi responder at the specified network address, using custom net.Dialer.
// See func net.Dial for a description of the network and address parameters.
func DialWithDialer(network, address string, dialer net.Dialer) (fcgi *FCGIClient, err error) {
	var conn net.Conn
	conn, err = dialer.Dial(network, address)
	if err != nil {
		return
	}

	tmp, err := ioutil.TempDir("", "fcgi")
	if err != nil {
		return nil, err
	}
	binlog, err := os.Create(filepath.Join(tmp, "bin.log"))
	if err != nil {
		return nil, err
	}
	strlog, err := os.Create(filepath.Join(tmp, "str.log"))
	if err != nil {
		return nil, err
	}

	fcgi = &FCGIClient{
		rwc:       rwcWrapper{conn, binlog, strlog},
		keepAlive: false,
		reqID:     1,
	}
	fmt.Printf("FASTCGI: Dumping to %v\n", tmp)
	return
}
Пример #23
0
func (c *Client) tcpConnect(dialer *net.Dialer) (err error) {
	c.connMutex.RLock()
	defer c.connMutex.RUnlock()
	tcpaddr, err := net.ResolveTCPAddr("tcp", c.addr)
	if err != nil {
		return err
	}
	c.tcpaddr = tcpaddr

	if c.conn_count <= 0 {
		return BadNumberOfConnections
	} else if conn := <-c.conns; conn == nil {
		// Create multiple connections to Riak and send these to the conns channel for later use
		for i := 0; i < c.conn_count; i++ {
			conn, err := dialer.Dial("tcp", tcpaddr.String())
			if err != nil {
				// Empty the conns channel before returning, in case an error appeared after a few
				// successful connections.
				for j := 0; j < i; j++ {
					(<-c.conns).Close()
				}
				c.conns <- nil
				return err
			}
			c.conns <- conn.(*net.TCPConn)
		}
	} else {
		c.conns <- conn
	}
	return nil
}
Пример #24
0
func DialMemdConn(address string, tlsConfig *tls.Config, deadline time.Time) (*memdConn, error) {
	d := net.Dialer{
		Deadline: deadline,
	}

	baseConn, err := d.Dial("tcp", address)
	if err != nil {
		return nil, err
	}

	tcpConn := baseConn.(*net.TCPConn)
	tcpConn.SetNoDelay(false)

	var conn io.ReadWriteCloser
	if tlsConfig == nil {
		conn = tcpConn
	} else {
		tlsConn := tls.Client(tcpConn, tlsConfig)
		if err != nil {
			return nil, err
		}

		conn = tlsConn
	}

	return &memdConn{
		conn: conn,
	}, nil
}
Пример #25
0
// NewConnection creates a new connection to the database server
func NewConnection(address string, opts *ConnectOpts) (*Connection, error) {
	var err error
	c := &Connection{
		address: address,
		opts:    opts,
		cursors: make(map[int64]*Cursor),
	}
	// Connect to Server
	nd := net.Dialer{Timeout: c.opts.Timeout, KeepAlive: opts.KeepAlivePeriod}
	if c.opts.TLSConfig == nil {
		c.Conn, err = nd.Dial("tcp", address)
	} else {
		c.Conn, err = tls.DialWithDialer(&nd, "tcp", address, c.opts.TLSConfig)
	}
	if err != nil {
		return nil, RQLConnectionError{rqlError(err.Error())}
	}

	// Send handshake
	handshake, err := c.handshake(opts.HandshakeVersion)
	if err != nil {
		return nil, err
	}

	if err = handshake.Send(); err != nil {
		return nil, err
	}

	return c, nil
}
Пример #26
0
// Dial and scrape the basic service parameters
func (s *BasicService) dialAndScrape() (net.Conn, error) {
	if s.Timeout == 0 {
		log.Warnln("0 deadline set for service. This is probably not what you want as services will flap.")
	}

	// Set absolute deadline
	deadline := time.Now().Add(time.Duration(s.Timeout))

	// Dialer deadline
	dialer := net.Dialer{
		Deadline: deadline,
	}

	var err error
	var conn net.Conn

	conn, err = dialer.Dial(s.Protocol, fmt.Sprintf("%s:%d", s.Host().Hostname, s.Port()))
	if err != nil {
		s.portOpen = FAILED
	} else {
		s.portOpen = SUCCESS
	}

	if conn != nil {
		// Connection deadline
		conn.SetDeadline(deadline)
	}

	return conn, err
}
Пример #27
0
// Dial connects to a remote address and pipes all os.Stdin to the remote end.
// If localAddr is set, uses it to Dial from.
func Dial(localAddr, remoteAddr string) (net.Conn, error) {

	var laddr net.Addr
	var err error
	if localAddr != "" {
		laddr, err = net.ResolveTCPAddr("tcp", localAddr)
		if err != nil {
			return nil, fmt.Errorf("failed to resolve address %s", localAddr)
		}
	}

	if laddr != nil {
		out("dialing %s from %s", remoteAddr, laddr)
	} else {
		out("dialing %s", remoteAddr)
	}

	d := net.Dialer{LocalAddr: laddr}
	c, err := d.Dial("tcp", remoteAddr)
	if err != nil {
		return nil, err
	}
	out("connected to %s", c.RemoteAddr())

	return c, nil
}
Пример #28
0
func XSISubscribeCH(Config ConfigT, def DefHead) (net.Conn, string) {
	var CPOST string = "POST /com.broadsoft.async/com.broadsoft.xsi-events/v2.0/channel HTTP/1.1"
	var CSET string = ConcatStr("", "<?xml version=\"1.0\" encoding=\"UTF-8\"?><Channel xmlns=\"http://schema.broadsoft.com/xsi\"><channelSetId>", def.CHANID, "</channelSetId><priority>1</priority><weight>100</weight><expires>", Config.Main.Expires, "</expires></Channel>")
	var CLEN string = ConcatStr("", "Content-Length: ", strconv.Itoa(len(CSET)))
	var dialer net.Dialer
	dialer.Timeout = time.Second
	chandesc, err := dialer.Dial("tcp", ConcatStr(":", Config.Main.Host, Config.Main.HTTPPort))
	if err != nil {
		LogErr(err, "chan dial")
	}
	fmt.Fprintf(chandesc, "%s\n%s\n%s\n%s\n%s\n\n%s\n", CPOST, def.AUTHORIZATION, def.HOSTH, CLEN, def.CTYPE, CSET)
	chanreader := bufio.NewReader(chandesc)
	status, err := chanreader.ReadString('\n')
	if err != nil {
		LogErr(err, "chan read")
	}
	if !strings.Contains(status, "200") {
		LogErr(nil, "chan status", status)
	}
	//get new chan id
	data := make([]byte, 1024)
	_, err = chanreader.Read(data)
	chanID := GetChanID(data)
	return chandesc, chanID
}
Пример #29
0
func (*sysView) Dial(network, address string,
	dialer *net.Dialer) (net.Conn, error) {
	if dialer != nil {
		return dialer.Dial(network, address)
	} else {
		return net.Dial(network, address)
	}
}
Пример #30
0
// DefaultDial attempts to open a TCP connection to the provided address, explicitly
// enabling keep-alives with a one-second interval.
func (c *Client) DefaultDial(network, addr string) (net.Conn, error) {
	dialer := net.Dialer{
		Timeout:   c.config.DialTimeout,
		KeepAlive: time.Second,
	}

	return dialer.Dial(network, addr)
}