Пример #1
0
func (s Sender) sendData(data []byte, conn *net.TCPConn) bool {
	if len(data) == 0 {
		return true
	}

	if conn == nil {
		return false
	}
	/*
	   lenBuf := make([]byte, 4)
	   nData := len(data)
	   binary.PutUvarint(lenBuf, uint64(nData))
	   data = append(lenBuf, data...)
	*/

	st := time.Now()
	packId := tcp_pack.GetPackId(data)

	conn.SetDeadline(time.Now().Add(5 * time.Minute)) //设置超时
	loglib.Info(fmt.Sprintf("sender%d start sending pack:%s length:%d", s.id, packId, len(data)))
	n, err := conn.Write(data)
	ed := time.Now()
	loglib.Info(fmt.Sprintf("sender%d end sending pack:%s length:%d elapse:%s", s.id, packId, n, ed.Sub(st)))

	lib.CheckError(err)

	//写失败了就不用等应答了,肯定拿不到
	if err == nil {
		conn.SetReadDeadline(time.Now().Add(8 * time.Minute)) //设置超时
		time1 := time.Now()
		var temp []byte = make([]byte, 128)
		count, err := conn.Read(temp)
		if err == nil {
			loglib.Info(fmt.Sprintf("sender%d get anwser data len:%d for pack:%s elapse:%s", s.id, count, packId, time.Now().Sub(time1)))
		} else {
			loglib.Info(fmt.Sprintf("sender%d get anwser data len:%d for pack:%s elapse:%s, error:%s", s.id, count, packId, time.Now().Sub(time1), err.Error()))
		}

		temp = temp[:count]
		if string(temp) == "ok" { //发送成功
			return true
		} else if string(temp) == "wrong header" {
			//包头错误,丢弃
			loglib.Info(packId + " has wrong header, retry later!")
			return false
		} else { //发送失败
			//报警
			return false
		}
	} else {
		loglib.Warning(fmt.Sprintf("write pack %s error:%s", packId, err.Error()))
	}
	return false
}
Пример #2
0
func (s *Sender) writeToFile(data bytes.Buffer) {
	//写入文件
	filename := createFileName(s.id)
	//创建文件
	_, err := os.Create(filename)
	lib.CheckError(err)

	d := data.Bytes()

	packId := tcp_pack.GetPackId(d)

	loglib.Info(fmt.Sprintf("sender%d save pack %s to file %s len:%d", s.id, packId, filename, len(d)))
	err = ioutil.WriteFile(filename, d, 0666)
	if err != nil {
		loglib.Warning("write to file " + filename + " error:" + err.Error())
		lib.CheckError(err)
	} else {
		//追加fileCacheList
		fileList.PushBack(filename)
	}
}
Пример #3
0
//goroutine
func (s *Sender) Start() {
	// conn := s.getConnection()
	//初始化fileCacheList
	once.Do(s.reloadFileCache)

	//收尾工作
	defer func() {
		if err := recover(); err != nil {
			loglib.Error(fmt.Sprintf("sender %d panic:%v", s.id, err))
		}

		s.saveBufferInChan()

		//s.saveMemCache()

		s.connection.close()

		s.wq.AllDone()

	}()

	go s.pickPacks()
	//var connLost = 0
	var quit = false
	go lib.HandleQuitSignal(func() {
		quit = true
		s.connection.close()
	})

	var sendInterval = time.Duration(2000) //间隔稍大,避免发送文件缓存时因无连接或其他错误进入死循环

	var timeoutChan = time.After(sendInterval * time.Millisecond)
	for !quit {

		select {
		case b := <-s.memBuffer:
			//send b
			result := s.sendBuffer(b)
			if result == false {
				//改为直接放入文件缓存
				s.writeToFile(b)
			}

		case <-timeoutChan:
			timeoutChan = time.After(sendInterval * time.Millisecond)

			// send from file
			e := fileList.Remove()
			if e != nil { // file list is not empty
				filename := e.Value.(string)
				// fmt.Println("sender ",s.id,": get file :",filename)
				data, err := ioutil.ReadFile(filename)
				if err != nil {
					// fmt.Println("sender ",s.id,":",err)
					if _, ok := err.(*os.PathError); !ok {
						fileList.PushBack(filename)
					}
					loglib.Error(fmt.Sprintf("sender%d read file cache %s error:%s", s.id, filename, err.Error()))
				} else {

					packId := tcp_pack.GetPackId(data)                                                                          //debug info
					loglib.Info(fmt.Sprintf("sender%d read pack %s from file: %s, len: %d", s.id, packId, filename, len(data))) //debug info
					result := s.sendData2(data)
					if result == true {
						// s.fileCacheList.Remove(front)
						// log.Println("sender ",s.id,":removed file:",filename, "for pack", packId)//debug info
						err = os.Remove(filename)
						lib.CheckError(err)
						timeoutChan = time.After(time.Millisecond) //发送成功,不用再等待
					} else {
						fileList.PushBack(filename)
						// fmt.Println("sender ",s.id,": pushback file :",filename)
					}
				}
			}

		}
	}

}
Пример #4
0
func (t *TcpReceiver) handleConnnection(conn net.Conn, wg *sync.WaitGroup) {
	defer func() {
		if err := recover(); err != nil {
			loglib.Error(fmt.Sprintf("tcp receiver connection panic:%v", err))
		}
		conn.Close()
		wg.Done()
	}()
	/*
	   用于标识收到退出信号后,能否直接退出
	   只要接收信号时,包没有收完,都是可退出的,
	   发送方会缓存以后重传;
	   如果收完了就不能直接退出,可能包已传给下一级处理但是
	   却告诉发送方发送失败
	*/
	var quit = false //用于标识是否要退出

	go lib.HandleQuitSignal(func() {
		//关闭连接,避免阻塞在网络io上
		conn.Close()
		quit = true
	})

	request := make([]byte, 512*1024) //缓冲为512k

	var packLen int = 0
	currLen := 0
	var b = new(bytes.Buffer)
	var content = new(bytes.Buffer)
	inAddr := conn.RemoteAddr().String()
	parts := strings.Split(inAddr, ":")
	inIp := parts[0]

	packId := "unkown"

	var routeInfo map[string]string
	var rePull = false //是否补拉,如果是补拉就不做重复包检验

	loglib.Info("incoming: " + inAddr)

outer:
	for !quit {

		st := time.Now()
		if packLen == 0 {
			conn.SetReadDeadline(time.Now().Add(5 * time.Minute))
			time1 := time.Now() //时间打点
			// read zlib pack header length
			buf := make([]byte, 4)
			_, err := conn.Read(buf)
			if err != nil {
				loglib.Warning(fmt.Sprintf("conn:%s, get header len, tcp receiver read error:%s, elapse:%s", inAddr, err.Error(), time.Now().Sub(time1)))
				break
			}
			l, _ := binary.Uvarint(buf)
			headerLen := int(l)
			//get pack header
			headerBuf := make([]byte, headerLen)
			time2 := time.Now()
			_, err = conn.Read(headerBuf)
			if err != nil {
				loglib.Warning(fmt.Sprintf("conn:%s, get header, tcp receiver read error:%s, elapse:%s", inAddr, err.Error(), time.Now().Sub(time2)))
				break
			}

			//是否补拉
			route0 := tcp_pack.ParseHeader(headerBuf)
			if v, ok := route0["repull"]; ok && v == "1" {
				rePull = true
			} else {
				rePull = false
			}

			buf = append(buf, headerBuf...)
			header, _, err := tcp_pack.ExtractHeader(buf)
			if err != nil {
				loglib.Error("wrong format header " + string(headerBuf) + " " + err.Error())
				conn.Write([]byte("wrong header"))
				break
			}

			packId = tcp_pack.GetPackId(buf)
			packLen = header.PackLen
			currLen = 0
			routeInfo = make(map[string]string)
			b = new(bytes.Buffer)
			content = new(bytes.Buffer)

			loglib.Info(fmt.Sprintf("conn:%s, start receive pack %s, pack len:%d, header len:%d, header elapse:%s", inAddr, packId, packLen, headerLen, time.Now().Sub(time1)))
			b.Write(buf)

			routeInfo["ip"] = lib.GetIp()
			routeInfo["stage"] = "tcp recv"
			routeInfo["st"] = st.Format("2006-01-02 15:04:05.000")
		}
		//读包体的超时
		conn.SetReadDeadline(time.Now().Add(5 * time.Minute))
		time3 := time.Now()
		//read enough bytes
		for currLen < packLen {
			requestLen, err := conn.Read(request)
			if requestLen == 0 || err != nil {
				//sender有重发机制,所以可丢弃
				packLen = 0 //设为0以便读取新的包

				ed := time.Now()
				loglib.Warning(fmt.Sprintf("conn:%s, not full! ip:%s, packid:%s, received:%d, end recv:%s, elapse:%s, body elapse:%s, error:%s", inAddr, inIp, packId, currLen, ed, ed.Sub(st), ed.Sub(time3), err.Error()))
				break outer //连接出错直接跳出外层循环
			}
			currLen += requestLen
			content.Write(request[:requestLen])
		}
		if packLen > 0 && currLen >= packLen {
			//收完马上应答
			_, err := conn.Write([]byte("ok"))
			if err != nil {
				loglib.Warning(fmt.Sprintf("ip:%s, packid:%s received, but response back error:%s", inIp, packId, err.Error()))
			} else {
				loglib.Info(fmt.Sprintf("conn:%s, response to packid:%s", inAddr, packId))
			}
			//避免收到重复包(补拉例外)
			appeared, ok, code := t.hasAppeared(content)
			if !ok || rePull {
				ed := time.Now()
				routeInfo["ed"] = ed.Format("2006-01-02 15:04:05.000")
				routeInfo["elapse"] = ed.Sub(st).String()
				b.Write(content.Bytes())
				vbytes := tcp_pack.Packing(b.Bytes(), routeInfo, true)
				b = bytes.NewBuffer(vbytes)
				t.buffer <- *b
				packAppear := PackAppear{time.Now().Unix(), packId}
				t.mutex.Lock()
				t.footPrint[code] = packAppear //这里挂过
				t.mutex.Unlock()

				loglib.Info(fmt.Sprintf("conn:%s, finish ip:%s, packid:%s, repull:%v, received:%d, elapse:%s, body elapse:%s", inAddr, inIp, packId, rePull, currLen, ed.Sub(st), ed.Sub(time3)))
			} else {
				loglib.Info(fmt.Sprintf("conn:%s, pack %s repeat %s already appear at %s", inAddr, packId, appeared.Id, time.Unix(appeared.Time, 0)))
			}
			packLen = 0
		}

	}
	loglib.Info("conn finish: " + inAddr)
}