示例#1
0
文件: ssa.go 项目: duhaibo0404/go-1
func ssaGenValue(s *gc.SSAGenState, v *ssa.Value) {
	s.SetLineno(v.Line)
	switch v.Op {
	case ssa.OpAMD64ADDQ, ssa.OpAMD64ADDL, ssa.OpAMD64ADDW:
		r := gc.SSARegNum(v)
		r1 := gc.SSARegNum(v.Args[0])
		r2 := gc.SSARegNum(v.Args[1])
		switch {
		case r == r1:
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_REG
			p.From.Reg = r2
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		case r == r2:
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_REG
			p.From.Reg = r1
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		default:
			var asm obj.As
			switch v.Op {
			case ssa.OpAMD64ADDQ:
				asm = x86.ALEAQ
			case ssa.OpAMD64ADDL:
				asm = x86.ALEAL
			case ssa.OpAMD64ADDW:
				asm = x86.ALEAL
			}
			p := gc.Prog(asm)
			p.From.Type = obj.TYPE_MEM
			p.From.Reg = r1
			p.From.Scale = 1
			p.From.Index = r2
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}
	// 2-address opcode arithmetic, symmetric
	case ssa.OpAMD64ADDB, ssa.OpAMD64ADDSS, ssa.OpAMD64ADDSD,
		ssa.OpAMD64ANDQ, ssa.OpAMD64ANDL, ssa.OpAMD64ANDW, ssa.OpAMD64ANDB,
		ssa.OpAMD64ORQ, ssa.OpAMD64ORL, ssa.OpAMD64ORW, ssa.OpAMD64ORB,
		ssa.OpAMD64XORQ, ssa.OpAMD64XORL, ssa.OpAMD64XORW, ssa.OpAMD64XORB,
		ssa.OpAMD64MULQ, ssa.OpAMD64MULL, ssa.OpAMD64MULW, ssa.OpAMD64MULB,
		ssa.OpAMD64MULSS, ssa.OpAMD64MULSD, ssa.OpAMD64PXOR:
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v.Args[1])
		if x != r && y != r {
			opregreg(moveByType(v.Type), r, x)
			x = r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
		if x == r {
			p.From.Reg = y
		} else {
			p.From.Reg = x
		}
	// 2-address opcode arithmetic, not symmetric
	case ssa.OpAMD64SUBQ, ssa.OpAMD64SUBL, ssa.OpAMD64SUBW, ssa.OpAMD64SUBB:
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v.Args[1])
		var neg bool
		if y == r {
			// compute -(y-x) instead
			x, y = y, x
			neg = true
		}
		if x != r {
			opregreg(moveByType(v.Type), r, x)
		}
		opregreg(v.Op.Asm(), r, y)

		if neg {
			if v.Op == ssa.OpAMD64SUBQ {
				p := gc.Prog(x86.ANEGQ)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
			} else { // Avoids partial registers write
				p := gc.Prog(x86.ANEGL)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
			}
		}
	case ssa.OpAMD64SUBSS, ssa.OpAMD64SUBSD, ssa.OpAMD64DIVSS, ssa.OpAMD64DIVSD:
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v.Args[1])
		if y == r && x != r {
			// r/y := x op r/y, need to preserve x and rewrite to
			// r/y := r/y op x15
			x15 := int16(x86.REG_X15)
			// register move y to x15
			// register move x to y
			// rename y with x15
			opregreg(moveByType(v.Type), x15, y)
			opregreg(moveByType(v.Type), r, x)
			y = x15
		} else if x != r {
			opregreg(moveByType(v.Type), r, x)
		}
		opregreg(v.Op.Asm(), r, y)

	case ssa.OpAMD64DIVQ, ssa.OpAMD64DIVL, ssa.OpAMD64DIVW,
		ssa.OpAMD64DIVQU, ssa.OpAMD64DIVLU, ssa.OpAMD64DIVWU,
		ssa.OpAMD64MODQ, ssa.OpAMD64MODL, ssa.OpAMD64MODW,
		ssa.OpAMD64MODQU, ssa.OpAMD64MODLU, ssa.OpAMD64MODWU:

		// Arg[0] is already in AX as it's the only register we allow
		// and AX is the only output
		x := gc.SSARegNum(v.Args[1])

		// CPU faults upon signed overflow, which occurs when most
		// negative int is divided by -1.
		var j *obj.Prog
		if v.Op == ssa.OpAMD64DIVQ || v.Op == ssa.OpAMD64DIVL ||
			v.Op == ssa.OpAMD64DIVW || v.Op == ssa.OpAMD64MODQ ||
			v.Op == ssa.OpAMD64MODL || v.Op == ssa.OpAMD64MODW {

			var c *obj.Prog
			switch v.Op {
			case ssa.OpAMD64DIVQ, ssa.OpAMD64MODQ:
				c = gc.Prog(x86.ACMPQ)
				j = gc.Prog(x86.AJEQ)
				// go ahead and sign extend to save doing it later
				gc.Prog(x86.ACQO)

			case ssa.OpAMD64DIVL, ssa.OpAMD64MODL:
				c = gc.Prog(x86.ACMPL)
				j = gc.Prog(x86.AJEQ)
				gc.Prog(x86.ACDQ)

			case ssa.OpAMD64DIVW, ssa.OpAMD64MODW:
				c = gc.Prog(x86.ACMPW)
				j = gc.Prog(x86.AJEQ)
				gc.Prog(x86.ACWD)
			}
			c.From.Type = obj.TYPE_REG
			c.From.Reg = x
			c.To.Type = obj.TYPE_CONST
			c.To.Offset = -1

			j.To.Type = obj.TYPE_BRANCH

		}

		// for unsigned ints, we sign extend by setting DX = 0
		// signed ints were sign extended above
		if v.Op == ssa.OpAMD64DIVQU || v.Op == ssa.OpAMD64MODQU ||
			v.Op == ssa.OpAMD64DIVLU || v.Op == ssa.OpAMD64MODLU ||
			v.Op == ssa.OpAMD64DIVWU || v.Op == ssa.OpAMD64MODWU {
			c := gc.Prog(x86.AXORQ)
			c.From.Type = obj.TYPE_REG
			c.From.Reg = x86.REG_DX
			c.To.Type = obj.TYPE_REG
			c.To.Reg = x86.REG_DX
		}

		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = x

		// signed division, rest of the check for -1 case
		if j != nil {
			j2 := gc.Prog(obj.AJMP)
			j2.To.Type = obj.TYPE_BRANCH

			var n *obj.Prog
			if v.Op == ssa.OpAMD64DIVQ || v.Op == ssa.OpAMD64DIVL ||
				v.Op == ssa.OpAMD64DIVW {
				// n * -1 = -n
				n = gc.Prog(x86.ANEGQ)
				n.To.Type = obj.TYPE_REG
				n.To.Reg = x86.REG_AX
			} else {
				// n % -1 == 0
				n = gc.Prog(x86.AXORQ)
				n.From.Type = obj.TYPE_REG
				n.From.Reg = x86.REG_DX
				n.To.Type = obj.TYPE_REG
				n.To.Reg = x86.REG_DX
			}

			j.To.Val = n
			j2.To.Val = s.Pc()
		}

	case ssa.OpAMD64HMULQ, ssa.OpAMD64HMULL, ssa.OpAMD64HMULW, ssa.OpAMD64HMULB,
		ssa.OpAMD64HMULQU, ssa.OpAMD64HMULLU, ssa.OpAMD64HMULWU, ssa.OpAMD64HMULBU:
		// the frontend rewrites constant division by 8/16/32 bit integers into
		// HMUL by a constant
		// SSA rewrites generate the 64 bit versions

		// Arg[0] is already in AX as it's the only register we allow
		// and DX is the only output we care about (the high bits)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[1])

		// IMULB puts the high portion in AH instead of DL,
		// so move it to DL for consistency
		if v.Type.Size() == 1 {
			m := gc.Prog(x86.AMOVB)
			m.From.Type = obj.TYPE_REG
			m.From.Reg = x86.REG_AH
			m.To.Type = obj.TYPE_REG
			m.To.Reg = x86.REG_DX
		}

	case ssa.OpAMD64AVGQU:
		// compute (x+y)/2 unsigned.
		// Do a 64-bit add, the overflow goes into the carry.
		// Shift right once and pull the carry back into the 63rd bit.
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v.Args[1])
		if x != r && y != r {
			opregreg(moveByType(v.Type), r, x)
			x = r
		}
		p := gc.Prog(x86.AADDQ)
		p.From.Type = obj.TYPE_REG
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
		if x == r {
			p.From.Reg = y
		} else {
			p.From.Reg = x
		}
		p = gc.Prog(x86.ARCRQ)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = 1
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r

	case ssa.OpAMD64SHLQ, ssa.OpAMD64SHLL, ssa.OpAMD64SHLW, ssa.OpAMD64SHLB,
		ssa.OpAMD64SHRQ, ssa.OpAMD64SHRL, ssa.OpAMD64SHRW, ssa.OpAMD64SHRB,
		ssa.OpAMD64SARQ, ssa.OpAMD64SARL, ssa.OpAMD64SARW, ssa.OpAMD64SARB:
		x := gc.SSARegNum(v.Args[0])
		r := gc.SSARegNum(v)
		if x != r {
			if r == x86.REG_CX {
				v.Fatalf("can't implement %s, target and shift both in CX", v.LongString())
			}
			p := gc.Prog(moveByType(v.Type))
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[1]) // should be CX
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpAMD64ADDQconst, ssa.OpAMD64ADDLconst, ssa.OpAMD64ADDWconst:
		r := gc.SSARegNum(v)
		a := gc.SSARegNum(v.Args[0])
		if r == a {
			if v.AuxInt2Int64() == 1 {
				var asm obj.As
				switch v.Op {
				// Software optimization manual recommends add $1,reg.
				// But inc/dec is 1 byte smaller. ICC always uses inc
				// Clang/GCC choose depending on flags, but prefer add.
				// Experiments show that inc/dec is both a little faster
				// and make a binary a little smaller.
				case ssa.OpAMD64ADDQconst:
					asm = x86.AINCQ
				case ssa.OpAMD64ADDLconst:
					asm = x86.AINCL
				case ssa.OpAMD64ADDWconst:
					asm = x86.AINCL
				}
				p := gc.Prog(asm)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
				return
			} else if v.AuxInt2Int64() == -1 {
				var asm obj.As
				switch v.Op {
				case ssa.OpAMD64ADDQconst:
					asm = x86.ADECQ
				case ssa.OpAMD64ADDLconst:
					asm = x86.ADECL
				case ssa.OpAMD64ADDWconst:
					asm = x86.ADECL
				}
				p := gc.Prog(asm)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
				return
			} else {
				p := gc.Prog(v.Op.Asm())
				p.From.Type = obj.TYPE_CONST
				p.From.Offset = v.AuxInt2Int64()
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
				return
			}
		}
		var asm obj.As
		switch v.Op {
		case ssa.OpAMD64ADDQconst:
			asm = x86.ALEAQ
		case ssa.OpAMD64ADDLconst:
			asm = x86.ALEAL
		case ssa.OpAMD64ADDWconst:
			asm = x86.ALEAL
		}
		p := gc.Prog(asm)
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = a
		p.From.Offset = v.AuxInt2Int64()
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r

	case ssa.OpAMD64CMOVQEQconst, ssa.OpAMD64CMOVLEQconst, ssa.OpAMD64CMOVWEQconst,
		ssa.OpAMD64CMOVQNEconst, ssa.OpAMD64CMOVLNEconst, ssa.OpAMD64CMOVWNEconst:
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		// Arg0 is in/out, move in to out if not already same
		if r != x {
			p := gc.Prog(moveByType(v.Type))
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}

		// Constant into AX, after arg0 movement in case arg0 is in AX
		p := gc.Prog(moveByType(v.Type))
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt2Int64()
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x86.REG_AX

		p = gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = x86.REG_AX
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r

	case ssa.OpAMD64MULQconst, ssa.OpAMD64MULLconst, ssa.OpAMD64MULWconst, ssa.OpAMD64MULBconst:
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		if r != x {
			p := gc.Prog(moveByType(v.Type))
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt2Int64()
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
		// TODO: Teach doasm to compile the three-address multiply imul $c, r1, r2
		// instead of using the MOVQ above.
		//p.From3 = new(obj.Addr)
		//p.From3.Type = obj.TYPE_REG
		//p.From3.Reg = gc.SSARegNum(v.Args[0])
	case ssa.OpAMD64SUBQconst, ssa.OpAMD64SUBLconst, ssa.OpAMD64SUBWconst:
		x := gc.SSARegNum(v.Args[0])
		r := gc.SSARegNum(v)
		// We have 3-op add (lea), so transforming a = b - const into
		// a = b + (- const), saves us 1 instruction. We can't fit
		// - (-1 << 31) into  4 bytes offset in lea.
		// We handle 2-address just fine below.
		if v.AuxInt2Int64() == -1<<31 || x == r {
			if x != r {
				// This code compensates for the fact that the register allocator
				// doesn't understand 2-address instructions yet. TODO: fix that.
				p := gc.Prog(moveByType(v.Type))
				p.From.Type = obj.TYPE_REG
				p.From.Reg = x
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
			}
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_CONST
			p.From.Offset = v.AuxInt2Int64()
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		} else if x == r && v.AuxInt2Int64() == -1 {
			var asm obj.As
			// x = x - (-1) is the same as x++
			// See OpAMD64ADDQconst comments about inc vs add $1,reg
			switch v.Op {
			case ssa.OpAMD64SUBQconst:
				asm = x86.AINCQ
			case ssa.OpAMD64SUBLconst:
				asm = x86.AINCL
			case ssa.OpAMD64SUBWconst:
				asm = x86.AINCL
			}
			p := gc.Prog(asm)
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		} else if x == r && v.AuxInt2Int64() == 1 {
			var asm obj.As
			switch v.Op {
			case ssa.OpAMD64SUBQconst:
				asm = x86.ADECQ
			case ssa.OpAMD64SUBLconst:
				asm = x86.ADECL
			case ssa.OpAMD64SUBWconst:
				asm = x86.ADECL
			}
			p := gc.Prog(asm)
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		} else {
			var asm obj.As
			switch v.Op {
			case ssa.OpAMD64SUBQconst:
				asm = x86.ALEAQ
			case ssa.OpAMD64SUBLconst:
				asm = x86.ALEAL
			case ssa.OpAMD64SUBWconst:
				asm = x86.ALEAL
			}
			p := gc.Prog(asm)
			p.From.Type = obj.TYPE_MEM
			p.From.Reg = x
			p.From.Offset = -v.AuxInt2Int64()
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}

	case ssa.OpAMD64ADDBconst,
		ssa.OpAMD64ANDQconst, ssa.OpAMD64ANDLconst, ssa.OpAMD64ANDWconst, ssa.OpAMD64ANDBconst,
		ssa.OpAMD64ORQconst, ssa.OpAMD64ORLconst, ssa.OpAMD64ORWconst, ssa.OpAMD64ORBconst,
		ssa.OpAMD64XORQconst, ssa.OpAMD64XORLconst, ssa.OpAMD64XORWconst, ssa.OpAMD64XORBconst,
		ssa.OpAMD64SUBBconst, ssa.OpAMD64SHLQconst, ssa.OpAMD64SHLLconst, ssa.OpAMD64SHLWconst,
		ssa.OpAMD64SHLBconst, ssa.OpAMD64SHRQconst, ssa.OpAMD64SHRLconst, ssa.OpAMD64SHRWconst,
		ssa.OpAMD64SHRBconst, ssa.OpAMD64SARQconst, ssa.OpAMD64SARLconst, ssa.OpAMD64SARWconst,
		ssa.OpAMD64SARBconst, ssa.OpAMD64ROLQconst, ssa.OpAMD64ROLLconst, ssa.OpAMD64ROLWconst,
		ssa.OpAMD64ROLBconst:
		// This code compensates for the fact that the register allocator
		// doesn't understand 2-address instructions yet. TODO: fix that.
		x := gc.SSARegNum(v.Args[0])
		r := gc.SSARegNum(v)
		if x != r {
			p := gc.Prog(moveByType(v.Type))
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt2Int64()
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpAMD64SBBQcarrymask, ssa.OpAMD64SBBLcarrymask:
		r := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = r
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpAMD64LEAQ1, ssa.OpAMD64LEAQ2, ssa.OpAMD64LEAQ4, ssa.OpAMD64LEAQ8:
		p := gc.Prog(x86.ALEAQ)
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		switch v.Op {
		case ssa.OpAMD64LEAQ1:
			p.From.Scale = 1
		case ssa.OpAMD64LEAQ2:
			p.From.Scale = 2
		case ssa.OpAMD64LEAQ4:
			p.From.Scale = 4
		case ssa.OpAMD64LEAQ8:
			p.From.Scale = 8
		}
		p.From.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64LEAQ:
		p := gc.Prog(x86.ALEAQ)
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64CMPQ, ssa.OpAMD64CMPL, ssa.OpAMD64CMPW, ssa.OpAMD64CMPB,
		ssa.OpAMD64TESTQ, ssa.OpAMD64TESTL, ssa.OpAMD64TESTW, ssa.OpAMD64TESTB:
		opregreg(v.Op.Asm(), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[0]))
	case ssa.OpAMD64UCOMISS, ssa.OpAMD64UCOMISD:
		// Go assembler has swapped operands for UCOMISx relative to CMP,
		// must account for that right here.
		opregreg(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]))
	case ssa.OpAMD64CMPQconst, ssa.OpAMD64CMPLconst, ssa.OpAMD64CMPWconst, ssa.OpAMD64CMPBconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		p.To.Type = obj.TYPE_CONST
		p.To.Offset = v.AuxInt2Int64()
	case ssa.OpAMD64TESTQconst, ssa.OpAMD64TESTLconst, ssa.OpAMD64TESTWconst, ssa.OpAMD64TESTBconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt2Int64()
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
	case ssa.OpAMD64MOVBconst, ssa.OpAMD64MOVWconst, ssa.OpAMD64MOVLconst, ssa.OpAMD64MOVQconst:
		x := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt2Int64()
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x
		// If flags are live at this instruction, suppress the
		// MOV $0,AX -> XOR AX,AX optimization.
		if v.Aux != nil {
			p.Mark |= x86.PRESERVEFLAGS
		}
	case ssa.OpAMD64MOVSSconst, ssa.OpAMD64MOVSDconst:
		x := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_FCONST
		p.From.Val = math.Float64frombits(uint64(v.AuxInt))
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x
	case ssa.OpAMD64MOVQload, ssa.OpAMD64MOVSSload, ssa.OpAMD64MOVSDload, ssa.OpAMD64MOVLload, ssa.OpAMD64MOVWload, ssa.OpAMD64MOVBload, ssa.OpAMD64MOVBQSXload, ssa.OpAMD64MOVWQSXload, ssa.OpAMD64MOVLQSXload, ssa.OpAMD64MOVOload:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVQloadidx1:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 1
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVQloadidx8, ssa.OpAMD64MOVSDloadidx8:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 8
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVLloadidx1:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 1
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVLloadidx4, ssa.OpAMD64MOVSSloadidx4:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 4
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVWloadidx1:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 1
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVWloadidx2:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 2
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVBloadidx1:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 1
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVQstore, ssa.OpAMD64MOVSSstore, ssa.OpAMD64MOVSDstore, ssa.OpAMD64MOVLstore, ssa.OpAMD64MOVWstore, ssa.OpAMD64MOVBstore, ssa.OpAMD64MOVOstore:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVQstoreidx8, ssa.OpAMD64MOVSDstoreidx8:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 8
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVSSstoreidx4, ssa.OpAMD64MOVLstoreidx4:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 4
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVWstoreidx2:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 2
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVBstoreidx1:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 1
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVQstoreconst, ssa.OpAMD64MOVLstoreconst, ssa.OpAMD64MOVWstoreconst, ssa.OpAMD64MOVBstoreconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		sc := v.AuxValAndOff()
		i := sc.Val()
		switch v.Op {
		case ssa.OpAMD64MOVBstoreconst:
			i = int64(int8(i))
		case ssa.OpAMD64MOVWstoreconst:
			i = int64(int16(i))
		case ssa.OpAMD64MOVLstoreconst:
			i = int64(int32(i))
		case ssa.OpAMD64MOVQstoreconst:
		}
		p.From.Offset = i
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux2(&p.To, v, sc.Off())
	case ssa.OpAMD64MOVQstoreconstidx8, ssa.OpAMD64MOVLstoreconstidx4, ssa.OpAMD64MOVWstoreconstidx2, ssa.OpAMD64MOVBstoreconstidx1:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		sc := v.AuxValAndOff()
		switch v.Op {
		case ssa.OpAMD64MOVBstoreconstidx1:
			p.From.Offset = int64(int8(sc.Val()))
			p.To.Scale = 1
		case ssa.OpAMD64MOVWstoreconstidx2:
			p.From.Offset = int64(int16(sc.Val()))
			p.To.Scale = 2
		case ssa.OpAMD64MOVLstoreconstidx4:
			p.From.Offset = int64(int32(sc.Val()))
			p.To.Scale = 4
		case ssa.OpAMD64MOVQstoreconstidx8:
			p.From.Offset = sc.Val()
			p.To.Scale = 8
		}
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux2(&p.To, v, sc.Off())
	case ssa.OpAMD64MOVLQSX, ssa.OpAMD64MOVWQSX, ssa.OpAMD64MOVBQSX, ssa.OpAMD64MOVLQZX, ssa.OpAMD64MOVWQZX, ssa.OpAMD64MOVBQZX,
		ssa.OpAMD64CVTSL2SS, ssa.OpAMD64CVTSL2SD, ssa.OpAMD64CVTSQ2SS, ssa.OpAMD64CVTSQ2SD,
		ssa.OpAMD64CVTTSS2SL, ssa.OpAMD64CVTTSD2SL, ssa.OpAMD64CVTTSS2SQ, ssa.OpAMD64CVTTSD2SQ,
		ssa.OpAMD64CVTSS2SD, ssa.OpAMD64CVTSD2SS:
		opregreg(v.Op.Asm(), gc.SSARegNum(v), gc.SSARegNum(v.Args[0]))
	case ssa.OpAMD64DUFFZERO:
		p := gc.Prog(obj.ADUFFZERO)
		p.To.Type = obj.TYPE_ADDR
		p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
		p.To.Offset = v.AuxInt
	case ssa.OpAMD64MOVOconst:
		if v.AuxInt != 0 {
			v.Unimplementedf("MOVOconst can only do constant=0")
		}
		r := gc.SSARegNum(v)
		opregreg(x86.AXORPS, r, r)
	case ssa.OpAMD64DUFFCOPY:
		p := gc.Prog(obj.ADUFFCOPY)
		p.To.Type = obj.TYPE_ADDR
		p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))
		p.To.Offset = v.AuxInt

	case ssa.OpCopy, ssa.OpAMD64MOVQconvert: // TODO: use MOVQreg for reg->reg copies instead of OpCopy?
		if v.Type.IsMemory() {
			return
		}
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v)
		if x != y {
			opregreg(moveByType(v.Type), y, x)
		}
	case ssa.OpLoadReg:
		if v.Type.IsFlags() {
			v.Unimplementedf("load flags not implemented: %v", v.LongString())
			return
		}
		p := gc.Prog(loadByType(v.Type))
		n, off := gc.AutoVar(v.Args[0])
		p.From.Type = obj.TYPE_MEM
		p.From.Node = n
		p.From.Sym = gc.Linksym(n.Sym)
		p.From.Offset = off
		if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
			p.From.Name = obj.NAME_PARAM
			p.From.Offset += n.Xoffset
		} else {
			p.From.Name = obj.NAME_AUTO
		}
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)

	case ssa.OpStoreReg:
		if v.Type.IsFlags() {
			v.Unimplementedf("store flags not implemented: %v", v.LongString())
			return
		}
		p := gc.Prog(storeByType(v.Type))
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		n, off := gc.AutoVar(v)
		p.To.Type = obj.TYPE_MEM
		p.To.Node = n
		p.To.Sym = gc.Linksym(n.Sym)
		p.To.Offset = off
		if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
			p.To.Name = obj.NAME_PARAM
			p.To.Offset += n.Xoffset
		} else {
			p.To.Name = obj.NAME_AUTO
		}
	case ssa.OpPhi:
		// just check to make sure regalloc and stackalloc did it right
		if v.Type.IsMemory() {
			return
		}
		f := v.Block.Func
		loc := f.RegAlloc[v.ID]
		for _, a := range v.Args {
			if aloc := f.RegAlloc[a.ID]; aloc != loc { // TODO: .Equal() instead?
				v.Fatalf("phi arg at different location than phi: %v @ %v, but arg %v @ %v\n%s\n", v, loc, a, aloc, v.Block.Func)
			}
		}
	case ssa.OpInitMem:
		// memory arg needs no code
	case ssa.OpArg:
		// input args need no code
	case ssa.OpAMD64LoweredGetClosurePtr:
		// Output is hardwired to DX only,
		// and DX contains the closure pointer on
		// closure entry, and this "instruction"
		// is scheduled to the very beginning
		// of the entry block.
	case ssa.OpAMD64LoweredGetG:
		r := gc.SSARegNum(v)
		// See the comments in cmd/internal/obj/x86/obj6.go
		// near CanUse1InsnTLS for a detailed explanation of these instructions.
		if x86.CanUse1InsnTLS(gc.Ctxt) {
			// MOVQ (TLS), r
			p := gc.Prog(x86.AMOVQ)
			p.From.Type = obj.TYPE_MEM
			p.From.Reg = x86.REG_TLS
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		} else {
			// MOVQ TLS, r
			// MOVQ (r)(TLS*1), r
			p := gc.Prog(x86.AMOVQ)
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x86.REG_TLS
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
			q := gc.Prog(x86.AMOVQ)
			q.From.Type = obj.TYPE_MEM
			q.From.Reg = r
			q.From.Index = x86.REG_TLS
			q.From.Scale = 1
			q.To.Type = obj.TYPE_REG
			q.To.Reg = r
		}
	case ssa.OpAMD64CALLstatic:
		if v.Aux.(*gc.Sym) == gc.Deferreturn.Sym {
			// Deferred calls will appear to be returning to
			// the CALL deferreturn(SB) that we are about to emit.
			// However, the stack trace code will show the line
			// of the instruction byte before the return PC.
			// To avoid that being an unrelated instruction,
			// insert an actual hardware NOP that will have the right line number.
			// This is different from obj.ANOP, which is a virtual no-op
			// that doesn't make it into the instruction stream.
			ginsnop()
		}
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(v.Aux.(*gc.Sym))
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLclosure:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLdefer:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(gc.Deferproc.Sym)
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLgo:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(gc.Newproc.Sym)
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLinter:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64NEGQ, ssa.OpAMD64NEGL, ssa.OpAMD64NEGW, ssa.OpAMD64NEGB,
		ssa.OpAMD64BSWAPQ, ssa.OpAMD64BSWAPL,
		ssa.OpAMD64NOTQ, ssa.OpAMD64NOTL, ssa.OpAMD64NOTW, ssa.OpAMD64NOTB:
		x := gc.SSARegNum(v.Args[0])
		r := gc.SSARegNum(v)
		if x != r {
			p := gc.Prog(moveByType(v.Type))
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpAMD64BSFQ, ssa.OpAMD64BSFL, ssa.OpAMD64BSFW,
		ssa.OpAMD64BSRQ, ssa.OpAMD64BSRL, ssa.OpAMD64BSRW,
		ssa.OpAMD64SQRTSD:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpSP, ssa.OpSB:
		// nothing to do
	case ssa.OpAMD64SETEQ, ssa.OpAMD64SETNE,
		ssa.OpAMD64SETL, ssa.OpAMD64SETLE,
		ssa.OpAMD64SETG, ssa.OpAMD64SETGE,
		ssa.OpAMD64SETGF, ssa.OpAMD64SETGEF,
		ssa.OpAMD64SETB, ssa.OpAMD64SETBE,
		ssa.OpAMD64SETORD, ssa.OpAMD64SETNAN,
		ssa.OpAMD64SETA, ssa.OpAMD64SETAE:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)

	case ssa.OpAMD64SETNEF:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
		q := gc.Prog(x86.ASETPS)
		q.To.Type = obj.TYPE_REG
		q.To.Reg = x86.REG_AX
		// ORL avoids partial register write and is smaller than ORQ, used by old compiler
		opregreg(x86.AORL, gc.SSARegNum(v), x86.REG_AX)

	case ssa.OpAMD64SETEQF:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
		q := gc.Prog(x86.ASETPC)
		q.To.Type = obj.TYPE_REG
		q.To.Reg = x86.REG_AX
		// ANDL avoids partial register write and is smaller than ANDQ, used by old compiler
		opregreg(x86.AANDL, gc.SSARegNum(v), x86.REG_AX)

	case ssa.OpAMD64InvertFlags:
		v.Fatalf("InvertFlags should never make it to codegen %v", v.LongString())
	case ssa.OpAMD64FlagEQ, ssa.OpAMD64FlagLT_ULT, ssa.OpAMD64FlagLT_UGT, ssa.OpAMD64FlagGT_ULT, ssa.OpAMD64FlagGT_UGT:
		v.Fatalf("Flag* ops should never make it to codegen %v", v.LongString())
	case ssa.OpAMD64REPSTOSQ:
		gc.Prog(x86.AREP)
		gc.Prog(x86.ASTOSQ)
	case ssa.OpAMD64REPMOVSQ:
		gc.Prog(x86.AREP)
		gc.Prog(x86.AMOVSQ)
	case ssa.OpVarDef:
		gc.Gvardef(v.Aux.(*gc.Node))
	case ssa.OpVarKill:
		gc.Gvarkill(v.Aux.(*gc.Node))
	case ssa.OpVarLive:
		gc.Gvarlive(v.Aux.(*gc.Node))
	case ssa.OpAMD64LoweredNilCheck:
		// Optimization - if the subsequent block has a load or store
		// at the same address, we don't need to issue this instruction.
		mem := v.Args[1]
		for _, w := range v.Block.Succs[0].Values {
			if w.Op == ssa.OpPhi {
				if w.Type.IsMemory() {
					mem = w
				}
				continue
			}
			if len(w.Args) == 0 || !w.Args[len(w.Args)-1].Type.IsMemory() {
				// w doesn't use a store - can't be a memory op.
				continue
			}
			if w.Args[len(w.Args)-1] != mem {
				v.Fatalf("wrong store after nilcheck v=%s w=%s", v, w)
			}
			switch w.Op {
			case ssa.OpAMD64MOVQload, ssa.OpAMD64MOVLload, ssa.OpAMD64MOVWload, ssa.OpAMD64MOVBload,
				ssa.OpAMD64MOVQstore, ssa.OpAMD64MOVLstore, ssa.OpAMD64MOVWstore, ssa.OpAMD64MOVBstore,
				ssa.OpAMD64MOVBQSXload, ssa.OpAMD64MOVWQSXload, ssa.OpAMD64MOVLQSXload,
				ssa.OpAMD64MOVSSload, ssa.OpAMD64MOVSDload, ssa.OpAMD64MOVOload,
				ssa.OpAMD64MOVSSstore, ssa.OpAMD64MOVSDstore, ssa.OpAMD64MOVOstore:
				if w.Args[0] == v.Args[0] && w.Aux == nil && w.AuxInt >= 0 && w.AuxInt < minZeroPage {
					if gc.Debug_checknil != 0 && int(v.Line) > 1 {
						gc.Warnl(v.Line, "removed nil check")
					}
					return
				}
			case ssa.OpAMD64MOVQstoreconst, ssa.OpAMD64MOVLstoreconst, ssa.OpAMD64MOVWstoreconst, ssa.OpAMD64MOVBstoreconst:
				off := ssa.ValAndOff(v.AuxInt).Off()
				if w.Args[0] == v.Args[0] && w.Aux == nil && off >= 0 && off < minZeroPage {
					if gc.Debug_checknil != 0 && int(v.Line) > 1 {
						gc.Warnl(v.Line, "removed nil check")
					}
					return
				}
			}
			if w.Type.IsMemory() {
				if w.Op == ssa.OpVarDef || w.Op == ssa.OpVarKill || w.Op == ssa.OpVarLive {
					// these ops are OK
					mem = w
					continue
				}
				// We can't delay the nil check past the next store.
				break
			}
		}
		// Issue a load which will fault if the input is nil.
		// TODO: We currently use the 2-byte instruction TESTB AX, (reg).
		// Should we use the 3-byte TESTB $0, (reg) instead?  It is larger
		// but it doesn't have false dependency on AX.
		// Or maybe allocate an output register and use MOVL (reg),reg2 ?
		// That trades clobbering flags for clobbering a register.
		p := gc.Prog(x86.ATESTB)
		p.From.Type = obj.TYPE_REG
		p.From.Reg = x86.REG_AX
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.To, v)
		if gc.Debug_checknil != 0 && v.Line > 1 { // v.Line==1 in generated wrappers
			gc.Warnl(v.Line, "generated nil check")
		}
	default:
		v.Unimplementedf("genValue not implemented: %s", v.LongString())
	}
}
示例#2
0
文件: ssa.go 项目: hurkgu/go
func ssaGenValue(s *gc.SSAGenState, v *ssa.Value) {
	s.SetLineno(v.Line)

	if gc.Thearch.Use387 {
		if ssaGenValue387(s, v) {
			return // v was handled by 387 generation.
		}
	}

	switch v.Op {
	case ssa.Op386ADDL:
		r := gc.SSARegNum(v)
		r1 := gc.SSARegNum(v.Args[0])
		r2 := gc.SSARegNum(v.Args[1])
		switch {
		case r == r1:
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_REG
			p.From.Reg = r2
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		case r == r2:
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_REG
			p.From.Reg = r1
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		default:
			p := gc.Prog(x86.ALEAL)
			p.From.Type = obj.TYPE_MEM
			p.From.Reg = r1
			p.From.Scale = 1
			p.From.Index = r2
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}

	// 2-address opcode arithmetic
	case ssa.Op386SUBL,
		ssa.Op386MULL,
		ssa.Op386ANDL,
		ssa.Op386ORL,
		ssa.Op386XORL,
		ssa.Op386SHLL,
		ssa.Op386SHRL, ssa.Op386SHRW, ssa.Op386SHRB,
		ssa.Op386SARL, ssa.Op386SARW, ssa.Op386SARB,
		ssa.Op386ADDSS, ssa.Op386ADDSD, ssa.Op386SUBSS, ssa.Op386SUBSD,
		ssa.Op386MULSS, ssa.Op386MULSD, ssa.Op386DIVSS, ssa.Op386DIVSD,
		ssa.Op386PXOR,
		ssa.Op386ADCL,
		ssa.Op386SBBL:
		r := gc.SSARegNum(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		opregreg(v.Op.Asm(), r, gc.SSARegNum(v.Args[1]))

	case ssa.Op386ADDLcarry, ssa.Op386SUBLcarry:
		// output 0 is carry/borrow, output 1 is the low 32 bits.
		r := gc.SSARegNum1(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output[1] not in same register %s", v.LongString())
		}
		opregreg(v.Op.Asm(), r, gc.SSARegNum(v.Args[1]))

	case ssa.Op386ADDLconstcarry, ssa.Op386SUBLconstcarry:
		// output 0 is carry/borrow, output 1 is the low 32 bits.
		r := gc.SSARegNum1(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output[1] not in same register %s", v.LongString())
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r

	case ssa.Op386DIVL, ssa.Op386DIVW,
		ssa.Op386DIVLU, ssa.Op386DIVWU,
		ssa.Op386MODL, ssa.Op386MODW,
		ssa.Op386MODLU, ssa.Op386MODWU:

		// Arg[0] is already in AX as it's the only register we allow
		// and AX is the only output
		x := gc.SSARegNum(v.Args[1])

		// CPU faults upon signed overflow, which occurs when most
		// negative int is divided by -1.
		var j *obj.Prog
		if v.Op == ssa.Op386DIVL || v.Op == ssa.Op386DIVW ||
			v.Op == ssa.Op386MODL || v.Op == ssa.Op386MODW {

			var c *obj.Prog
			switch v.Op {
			case ssa.Op386DIVL, ssa.Op386MODL:
				c = gc.Prog(x86.ACMPL)
				j = gc.Prog(x86.AJEQ)
				gc.Prog(x86.ACDQ) //TODO: fix

			case ssa.Op386DIVW, ssa.Op386MODW:
				c = gc.Prog(x86.ACMPW)
				j = gc.Prog(x86.AJEQ)
				gc.Prog(x86.ACWD)
			}
			c.From.Type = obj.TYPE_REG
			c.From.Reg = x
			c.To.Type = obj.TYPE_CONST
			c.To.Offset = -1

			j.To.Type = obj.TYPE_BRANCH
		}

		// for unsigned ints, we sign extend by setting DX = 0
		// signed ints were sign extended above
		if v.Op == ssa.Op386DIVLU || v.Op == ssa.Op386MODLU ||
			v.Op == ssa.Op386DIVWU || v.Op == ssa.Op386MODWU {
			c := gc.Prog(x86.AXORL)
			c.From.Type = obj.TYPE_REG
			c.From.Reg = x86.REG_DX
			c.To.Type = obj.TYPE_REG
			c.To.Reg = x86.REG_DX
		}

		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = x

		// signed division, rest of the check for -1 case
		if j != nil {
			j2 := gc.Prog(obj.AJMP)
			j2.To.Type = obj.TYPE_BRANCH

			var n *obj.Prog
			if v.Op == ssa.Op386DIVL || v.Op == ssa.Op386DIVW {
				// n * -1 = -n
				n = gc.Prog(x86.ANEGL)
				n.To.Type = obj.TYPE_REG
				n.To.Reg = x86.REG_AX
			} else {
				// n % -1 == 0
				n = gc.Prog(x86.AXORL)
				n.From.Type = obj.TYPE_REG
				n.From.Reg = x86.REG_DX
				n.To.Type = obj.TYPE_REG
				n.To.Reg = x86.REG_DX
			}

			j.To.Val = n
			j2.To.Val = s.Pc()
		}

	case ssa.Op386HMULL, ssa.Op386HMULW, ssa.Op386HMULB,
		ssa.Op386HMULLU, ssa.Op386HMULWU, ssa.Op386HMULBU:
		// the frontend rewrites constant division by 8/16/32 bit integers into
		// HMUL by a constant
		// SSA rewrites generate the 64 bit versions

		// Arg[0] is already in AX as it's the only register we allow
		// and DX is the only output we care about (the high bits)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[1])

		// IMULB puts the high portion in AH instead of DL,
		// so move it to DL for consistency
		if v.Type.Size() == 1 {
			m := gc.Prog(x86.AMOVB)
			m.From.Type = obj.TYPE_REG
			m.From.Reg = x86.REG_AH
			m.To.Type = obj.TYPE_REG
			m.To.Reg = x86.REG_DX
		}

	case ssa.Op386MULLQU:
		// AX * args[1], high 32 bits in DX (result[0]), low 32 bits in AX (result[1]).
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[1])

	case ssa.Op386ADDLconst:
		r := gc.SSARegNum(v)
		a := gc.SSARegNum(v.Args[0])
		if r == a {
			if v.AuxInt == 1 {
				p := gc.Prog(x86.AINCL)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
				return
			}
			if v.AuxInt == -1 {
				p := gc.Prog(x86.ADECL)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
				return
			}
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_CONST
			p.From.Offset = v.AuxInt
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
			return
		}
		p := gc.Prog(x86.ALEAL)
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = a
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r

	case ssa.Op386MULLconst:
		r := gc.SSARegNum(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
		// TODO: Teach doasm to compile the three-address multiply imul $c, r1, r2
		// then we don't need to use resultInArg0 for these ops.
		//p.From3 = new(obj.Addr)
		//p.From3.Type = obj.TYPE_REG
		//p.From3.Reg = gc.SSARegNum(v.Args[0])

	case ssa.Op386SUBLconst,
		ssa.Op386ADCLconst,
		ssa.Op386SBBLconst,
		ssa.Op386ANDLconst,
		ssa.Op386ORLconst,
		ssa.Op386XORLconst,
		ssa.Op386SHLLconst,
		ssa.Op386SHRLconst, ssa.Op386SHRWconst, ssa.Op386SHRBconst,
		ssa.Op386SARLconst, ssa.Op386SARWconst, ssa.Op386SARBconst,
		ssa.Op386ROLLconst, ssa.Op386ROLWconst, ssa.Op386ROLBconst:
		r := gc.SSARegNum(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.Op386SBBLcarrymask:
		r := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = r
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.Op386LEAL1, ssa.Op386LEAL2, ssa.Op386LEAL4, ssa.Op386LEAL8:
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		p := gc.Prog(x86.ALEAL)
		switch v.Op {
		case ssa.Op386LEAL1:
			p.From.Scale = 1
			if i == x86.REG_SP {
				r, i = i, r
			}
		case ssa.Op386LEAL2:
			p.From.Scale = 2
		case ssa.Op386LEAL4:
			p.From.Scale = 4
		case ssa.Op386LEAL8:
			p.From.Scale = 8
		}
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = r
		p.From.Index = i
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.Op386LEAL:
		p := gc.Prog(x86.ALEAL)
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.Op386CMPL, ssa.Op386CMPW, ssa.Op386CMPB,
		ssa.Op386TESTL, ssa.Op386TESTW, ssa.Op386TESTB:
		opregreg(v.Op.Asm(), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[0]))
	case ssa.Op386UCOMISS, ssa.Op386UCOMISD:
		// Go assembler has swapped operands for UCOMISx relative to CMP,
		// must account for that right here.
		opregreg(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]))
	case ssa.Op386CMPLconst, ssa.Op386CMPWconst, ssa.Op386CMPBconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		p.To.Type = obj.TYPE_CONST
		p.To.Offset = v.AuxInt
	case ssa.Op386TESTLconst, ssa.Op386TESTWconst, ssa.Op386TESTBconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
	case ssa.Op386MOVLconst:
		x := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x
		// If flags are live at this instruction, suppress the
		// MOV $0,AX -> XOR AX,AX optimization.
		if v.Aux != nil {
			p.Mark |= x86.PRESERVEFLAGS
		}
	case ssa.Op386MOVSSconst, ssa.Op386MOVSDconst:
		x := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_FCONST
		p.From.Val = math.Float64frombits(uint64(v.AuxInt))
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x
	case ssa.Op386MOVSSconst1, ssa.Op386MOVSDconst1:
		var literal string
		if v.Op == ssa.Op386MOVSDconst1 {
			literal = fmt.Sprintf("$f64.%016x", uint64(v.AuxInt))
		} else {
			literal = fmt.Sprintf("$f32.%08x", math.Float32bits(float32(math.Float64frombits(uint64(v.AuxInt)))))
		}
		p := gc.Prog(x86.ALEAL)
		p.From.Type = obj.TYPE_MEM
		p.From.Name = obj.NAME_EXTERN
		p.From.Sym = obj.Linklookup(gc.Ctxt, literal, 0)
		p.From.Sym.Local = true
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.Op386MOVSSconst2, ssa.Op386MOVSDconst2:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)

	case ssa.Op386MOVSSload, ssa.Op386MOVSDload, ssa.Op386MOVLload, ssa.Op386MOVWload, ssa.Op386MOVBload, ssa.Op386MOVBLSXload, ssa.Op386MOVWLSXload:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.Op386MOVSDloadidx8:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 8
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.Op386MOVLloadidx4, ssa.Op386MOVSSloadidx4:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 4
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.Op386MOVWloadidx2:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 2
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.Op386MOVBloadidx1, ssa.Op386MOVWloadidx1, ssa.Op386MOVLloadidx1, ssa.Op386MOVSSloadidx1, ssa.Op386MOVSDloadidx1:
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		if i == x86.REG_SP {
			r, i = i, r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = r
		p.From.Scale = 1
		p.From.Index = i
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.Op386MOVSSstore, ssa.Op386MOVSDstore, ssa.Op386MOVLstore, ssa.Op386MOVWstore, ssa.Op386MOVBstore:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.To, v)
	case ssa.Op386MOVSDstoreidx8:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 8
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.Op386MOVSSstoreidx4, ssa.Op386MOVLstoreidx4:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 4
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.Op386MOVWstoreidx2:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 2
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.Op386MOVBstoreidx1, ssa.Op386MOVWstoreidx1, ssa.Op386MOVLstoreidx1, ssa.Op386MOVSSstoreidx1, ssa.Op386MOVSDstoreidx1:
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		if i == x86.REG_SP {
			r, i = i, r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = r
		p.To.Scale = 1
		p.To.Index = i
		gc.AddAux(&p.To, v)
	case ssa.Op386MOVLstoreconst, ssa.Op386MOVWstoreconst, ssa.Op386MOVBstoreconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		sc := v.AuxValAndOff()
		p.From.Offset = sc.Val()
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux2(&p.To, v, sc.Off())
	case ssa.Op386MOVLstoreconstidx1, ssa.Op386MOVLstoreconstidx4, ssa.Op386MOVWstoreconstidx1, ssa.Op386MOVWstoreconstidx2, ssa.Op386MOVBstoreconstidx1:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		sc := v.AuxValAndOff()
		p.From.Offset = sc.Val()
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		switch v.Op {
		case ssa.Op386MOVBstoreconstidx1, ssa.Op386MOVWstoreconstidx1, ssa.Op386MOVLstoreconstidx1:
			p.To.Scale = 1
			if i == x86.REG_SP {
				r, i = i, r
			}
		case ssa.Op386MOVWstoreconstidx2:
			p.To.Scale = 2
		case ssa.Op386MOVLstoreconstidx4:
			p.To.Scale = 4
		}
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = r
		p.To.Index = i
		gc.AddAux2(&p.To, v, sc.Off())
	case ssa.Op386MOVWLSX, ssa.Op386MOVBLSX, ssa.Op386MOVWLZX, ssa.Op386MOVBLZX,
		ssa.Op386CVTSL2SS, ssa.Op386CVTSL2SD,
		ssa.Op386CVTTSS2SL, ssa.Op386CVTTSD2SL,
		ssa.Op386CVTSS2SD, ssa.Op386CVTSD2SS:
		opregreg(v.Op.Asm(), gc.SSARegNum(v), gc.SSARegNum(v.Args[0]))
	case ssa.Op386DUFFZERO:
		p := gc.Prog(obj.ADUFFZERO)
		p.To.Type = obj.TYPE_ADDR
		p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
		p.To.Offset = v.AuxInt
	case ssa.Op386DUFFCOPY:
		p := gc.Prog(obj.ADUFFCOPY)
		p.To.Type = obj.TYPE_ADDR
		p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))
		p.To.Offset = v.AuxInt

	case ssa.OpCopy, ssa.Op386MOVLconvert: // TODO: use MOVLreg for reg->reg copies instead of OpCopy?
		if v.Type.IsMemory() {
			return
		}
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v)
		if x != y {
			opregreg(moveByType(v.Type), y, x)
		}
	case ssa.OpLoadReg:
		if v.Type.IsFlags() {
			v.Unimplementedf("load flags not implemented: %v", v.LongString())
			return
		}
		p := gc.Prog(loadByType(v.Type))
		n, off := gc.AutoVar(v.Args[0])
		p.From.Type = obj.TYPE_MEM
		p.From.Node = n
		p.From.Sym = gc.Linksym(n.Sym)
		p.From.Offset = off
		if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
			p.From.Name = obj.NAME_PARAM
			p.From.Offset += n.Xoffset
		} else {
			p.From.Name = obj.NAME_AUTO
		}
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)

	case ssa.OpStoreReg:
		if v.Type.IsFlags() {
			v.Unimplementedf("store flags not implemented: %v", v.LongString())
			return
		}
		p := gc.Prog(storeByType(v.Type))
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		n, off := gc.AutoVar(v)
		p.To.Type = obj.TYPE_MEM
		p.To.Node = n
		p.To.Sym = gc.Linksym(n.Sym)
		p.To.Offset = off
		if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
			p.To.Name = obj.NAME_PARAM
			p.To.Offset += n.Xoffset
		} else {
			p.To.Name = obj.NAME_AUTO
		}
	case ssa.OpPhi:
		gc.CheckLoweredPhi(v)
	case ssa.OpInitMem:
		// memory arg needs no code
	case ssa.OpArg:
		// input args need no code
	case ssa.Op386LoweredGetClosurePtr:
		// Closure pointer is DX.
		gc.CheckLoweredGetClosurePtr(v)
	case ssa.Op386LoweredGetG:
		r := gc.SSARegNum(v)
		// See the comments in cmd/internal/obj/x86/obj6.go
		// near CanUse1InsnTLS for a detailed explanation of these instructions.
		if x86.CanUse1InsnTLS(gc.Ctxt) {
			// MOVL (TLS), r
			p := gc.Prog(x86.AMOVL)
			p.From.Type = obj.TYPE_MEM
			p.From.Reg = x86.REG_TLS
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		} else {
			// MOVL TLS, r
			// MOVL (r)(TLS*1), r
			p := gc.Prog(x86.AMOVL)
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x86.REG_TLS
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
			q := gc.Prog(x86.AMOVL)
			q.From.Type = obj.TYPE_MEM
			q.From.Reg = r
			q.From.Index = x86.REG_TLS
			q.From.Scale = 1
			q.To.Type = obj.TYPE_REG
			q.To.Reg = r
		}
	case ssa.Op386CALLstatic:
		if v.Aux.(*gc.Sym) == gc.Deferreturn.Sym {
			// Deferred calls will appear to be returning to
			// the CALL deferreturn(SB) that we are about to emit.
			// However, the stack trace code will show the line
			// of the instruction byte before the return PC.
			// To avoid that being an unrelated instruction,
			// insert an actual hardware NOP that will have the right line number.
			// This is different from obj.ANOP, which is a virtual no-op
			// that doesn't make it into the instruction stream.
			ginsnop()
		}
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(v.Aux.(*gc.Sym))
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.Op386CALLclosure:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.Op386CALLdefer:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(gc.Deferproc.Sym)
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.Op386CALLgo:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(gc.Newproc.Sym)
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.Op386CALLinter:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.Op386NEGL,
		ssa.Op386BSWAPL,
		ssa.Op386NOTL:
		r := gc.SSARegNum(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.Op386BSFL, ssa.Op386BSFW,
		ssa.Op386BSRL, ssa.Op386BSRW,
		ssa.Op386SQRTSD:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpSP, ssa.OpSB, ssa.OpSelect0, ssa.OpSelect1:
		// nothing to do
	case ssa.Op386SETEQ, ssa.Op386SETNE,
		ssa.Op386SETL, ssa.Op386SETLE,
		ssa.Op386SETG, ssa.Op386SETGE,
		ssa.Op386SETGF, ssa.Op386SETGEF,
		ssa.Op386SETB, ssa.Op386SETBE,
		ssa.Op386SETORD, ssa.Op386SETNAN,
		ssa.Op386SETA, ssa.Op386SETAE:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)

	case ssa.Op386SETNEF:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
		q := gc.Prog(x86.ASETPS)
		q.To.Type = obj.TYPE_REG
		q.To.Reg = x86.REG_AX
		opregreg(x86.AORL, gc.SSARegNum(v), x86.REG_AX)

	case ssa.Op386SETEQF:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
		q := gc.Prog(x86.ASETPC)
		q.To.Type = obj.TYPE_REG
		q.To.Reg = x86.REG_AX
		opregreg(x86.AANDL, gc.SSARegNum(v), x86.REG_AX)

	case ssa.Op386InvertFlags:
		v.Fatalf("InvertFlags should never make it to codegen %v", v.LongString())
	case ssa.Op386FlagEQ, ssa.Op386FlagLT_ULT, ssa.Op386FlagLT_UGT, ssa.Op386FlagGT_ULT, ssa.Op386FlagGT_UGT:
		v.Fatalf("Flag* ops should never make it to codegen %v", v.LongString())
	case ssa.Op386REPSTOSL:
		gc.Prog(x86.AREP)
		gc.Prog(x86.ASTOSL)
	case ssa.Op386REPMOVSL:
		gc.Prog(x86.AREP)
		gc.Prog(x86.AMOVSL)
	case ssa.OpVarDef:
		gc.Gvardef(v.Aux.(*gc.Node))
	case ssa.OpVarKill:
		gc.Gvarkill(v.Aux.(*gc.Node))
	case ssa.OpVarLive:
		gc.Gvarlive(v.Aux.(*gc.Node))
	case ssa.OpKeepAlive:
		if !v.Args[0].Type.IsPtrShaped() {
			v.Fatalf("keeping non-pointer alive %v", v.Args[0])
		}
		n, off := gc.AutoVar(v.Args[0])
		if n == nil {
			v.Fatalf("KeepLive with non-spilled value %s %s", v, v.Args[0])
		}
		if off != 0 {
			v.Fatalf("KeepLive with non-zero offset spill location %s:%d", n, off)
		}
		gc.Gvarlive(n)
	case ssa.Op386LoweredNilCheck:
		// Optimization - if the subsequent block has a load or store
		// at the same address, we don't need to issue this instruction.
		mem := v.Args[1]
		for _, w := range v.Block.Succs[0].Block().Values {
			if w.Op == ssa.OpPhi {
				if w.Type.IsMemory() {
					mem = w
				}
				continue
			}
			if len(w.Args) == 0 || !w.Args[len(w.Args)-1].Type.IsMemory() {
				// w doesn't use a store - can't be a memory op.
				continue
			}
			if w.Args[len(w.Args)-1] != mem {
				v.Fatalf("wrong store after nilcheck v=%s w=%s", v, w)
			}
			switch w.Op {
			case ssa.Op386MOVLload, ssa.Op386MOVWload, ssa.Op386MOVBload,
				ssa.Op386MOVLstore, ssa.Op386MOVWstore, ssa.Op386MOVBstore,
				ssa.Op386MOVBLSXload, ssa.Op386MOVWLSXload,
				ssa.Op386MOVSSload, ssa.Op386MOVSDload,
				ssa.Op386MOVSSstore, ssa.Op386MOVSDstore:
				if w.Args[0] == v.Args[0] && w.Aux == nil && w.AuxInt >= 0 && w.AuxInt < minZeroPage {
					if gc.Debug_checknil != 0 && int(v.Line) > 1 {
						gc.Warnl(v.Line, "removed nil check")
					}
					return
				}
			case ssa.Op386MOVLstoreconst, ssa.Op386MOVWstoreconst, ssa.Op386MOVBstoreconst:
				off := ssa.ValAndOff(v.AuxInt).Off()
				if w.Args[0] == v.Args[0] && w.Aux == nil && off >= 0 && off < minZeroPage {
					if gc.Debug_checknil != 0 && int(v.Line) > 1 {
						gc.Warnl(v.Line, "removed nil check")
					}
					return
				}
			}
			if w.Type.IsMemory() {
				if w.Op == ssa.OpVarDef || w.Op == ssa.OpVarKill || w.Op == ssa.OpVarLive {
					// these ops are OK
					mem = w
					continue
				}
				// We can't delay the nil check past the next store.
				break
			}
		}
		// Issue a load which will fault if the input is nil.
		// TODO: We currently use the 2-byte instruction TESTB AX, (reg).
		// Should we use the 3-byte TESTB $0, (reg) instead?  It is larger
		// but it doesn't have false dependency on AX.
		// Or maybe allocate an output register and use MOVL (reg),reg2 ?
		// That trades clobbering flags for clobbering a register.
		p := gc.Prog(x86.ATESTB)
		p.From.Type = obj.TYPE_REG
		p.From.Reg = x86.REG_AX
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.To, v)
		if gc.Debug_checknil != 0 && v.Line > 1 { // v.Line==1 in generated wrappers
			gc.Warnl(v.Line, "generated nil check")
		}
	case ssa.Op386FCHS:
		v.Fatalf("FCHS in non-387 mode")
	default:
		v.Unimplementedf("genValue not implemented: %s", v.LongString())
	}
}
示例#3
0
文件: ssa.go 项目: Mokolea/go
func ssaGenValue(s *gc.SSAGenState, v *ssa.Value) {
	s.SetLineno(v.Line)
	switch v.Op {
	case ssa.OpAMD64ADDQ, ssa.OpAMD64ADDL:
		r := gc.SSARegNum(v)
		r1 := gc.SSARegNum(v.Args[0])
		r2 := gc.SSARegNum(v.Args[1])
		switch {
		case r == r1:
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_REG
			p.From.Reg = r2
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		case r == r2:
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_REG
			p.From.Reg = r1
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		default:
			var asm obj.As
			if v.Op == ssa.OpAMD64ADDQ {
				asm = x86.ALEAQ
			} else {
				asm = x86.ALEAL
			}
			p := gc.Prog(asm)
			p.From.Type = obj.TYPE_MEM
			p.From.Reg = r1
			p.From.Scale = 1
			p.From.Index = r2
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}
	// 2-address opcode arithmetic
	case ssa.OpAMD64SUBQ, ssa.OpAMD64SUBL,
		ssa.OpAMD64MULQ, ssa.OpAMD64MULL,
		ssa.OpAMD64ANDQ, ssa.OpAMD64ANDL,
		ssa.OpAMD64ORQ, ssa.OpAMD64ORL,
		ssa.OpAMD64XORQ, ssa.OpAMD64XORL,
		ssa.OpAMD64SHLQ, ssa.OpAMD64SHLL,
		ssa.OpAMD64SHRQ, ssa.OpAMD64SHRL, ssa.OpAMD64SHRW, ssa.OpAMD64SHRB,
		ssa.OpAMD64SARQ, ssa.OpAMD64SARL, ssa.OpAMD64SARW, ssa.OpAMD64SARB,
		ssa.OpAMD64ADDSS, ssa.OpAMD64ADDSD, ssa.OpAMD64SUBSS, ssa.OpAMD64SUBSD,
		ssa.OpAMD64MULSS, ssa.OpAMD64MULSD, ssa.OpAMD64DIVSS, ssa.OpAMD64DIVSD,
		ssa.OpAMD64PXOR:
		r := gc.SSARegNum(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		opregreg(v.Op.Asm(), r, gc.SSARegNum(v.Args[1]))

	case ssa.OpAMD64DIVQU, ssa.OpAMD64DIVLU, ssa.OpAMD64DIVWU:
		// Arg[0] (the dividend) is in AX.
		// Arg[1] (the divisor) can be in any other register.
		// Result[0] (the quotient) is in AX.
		// Result[1] (the remainder) is in DX.
		r := gc.SSARegNum(v.Args[1])

		// Zero extend dividend.
		c := gc.Prog(x86.AXORL)
		c.From.Type = obj.TYPE_REG
		c.From.Reg = x86.REG_DX
		c.To.Type = obj.TYPE_REG
		c.To.Reg = x86.REG_DX

		// Issue divide.
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = r

	case ssa.OpAMD64DIVQ, ssa.OpAMD64DIVL, ssa.OpAMD64DIVW:
		// Arg[0] (the dividend) is in AX.
		// Arg[1] (the divisor) can be in any other register.
		// Result[0] (the quotient) is in AX.
		// Result[1] (the remainder) is in DX.
		r := gc.SSARegNum(v.Args[1])

		// CPU faults upon signed overflow, which occurs when the most
		// negative int is divided by -1. Handle divide by -1 as a special case.
		var c *obj.Prog
		switch v.Op {
		case ssa.OpAMD64DIVQ:
			c = gc.Prog(x86.ACMPQ)
		case ssa.OpAMD64DIVL:
			c = gc.Prog(x86.ACMPL)
		case ssa.OpAMD64DIVW:
			c = gc.Prog(x86.ACMPW)
		}
		c.From.Type = obj.TYPE_REG
		c.From.Reg = r
		c.To.Type = obj.TYPE_CONST
		c.To.Offset = -1
		j1 := gc.Prog(x86.AJEQ)
		j1.To.Type = obj.TYPE_BRANCH

		// Sign extend dividend.
		switch v.Op {
		case ssa.OpAMD64DIVQ:
			gc.Prog(x86.ACQO)
		case ssa.OpAMD64DIVL:
			gc.Prog(x86.ACDQ)
		case ssa.OpAMD64DIVW:
			gc.Prog(x86.ACWD)
		}

		// Issue divide.
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = r

		// Skip over -1 fixup code.
		j2 := gc.Prog(obj.AJMP)
		j2.To.Type = obj.TYPE_BRANCH

		// Issue -1 fixup code.
		// n / -1 = -n
		n1 := gc.Prog(x86.ANEGQ)
		n1.To.Type = obj.TYPE_REG
		n1.To.Reg = x86.REG_AX

		// n % -1 == 0
		n2 := gc.Prog(x86.AXORL)
		n2.From.Type = obj.TYPE_REG
		n2.From.Reg = x86.REG_DX
		n2.To.Type = obj.TYPE_REG
		n2.To.Reg = x86.REG_DX

		// TODO(khr): issue only the -1 fixup code we need.
		// For instance, if only the quotient is used, no point in zeroing the remainder.

		j1.To.Val = n1
		j2.To.Val = s.Pc()

	case ssa.OpAMD64HMULQ, ssa.OpAMD64HMULL, ssa.OpAMD64HMULW, ssa.OpAMD64HMULB,
		ssa.OpAMD64HMULQU, ssa.OpAMD64HMULLU, ssa.OpAMD64HMULWU, ssa.OpAMD64HMULBU:
		// the frontend rewrites constant division by 8/16/32 bit integers into
		// HMUL by a constant
		// SSA rewrites generate the 64 bit versions

		// Arg[0] is already in AX as it's the only register we allow
		// and DX is the only output we care about (the high bits)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[1])

		// IMULB puts the high portion in AH instead of DL,
		// so move it to DL for consistency
		if v.Type.Size() == 1 {
			m := gc.Prog(x86.AMOVB)
			m.From.Type = obj.TYPE_REG
			m.From.Reg = x86.REG_AH
			m.To.Type = obj.TYPE_REG
			m.To.Reg = x86.REG_DX
		}

	case ssa.OpAMD64AVGQU:
		// compute (x+y)/2 unsigned.
		// Do a 64-bit add, the overflow goes into the carry.
		// Shift right once and pull the carry back into the 63rd bit.
		r := gc.SSARegNum(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		p := gc.Prog(x86.AADDQ)
		p.From.Type = obj.TYPE_REG
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
		p.From.Reg = gc.SSARegNum(v.Args[1])
		p = gc.Prog(x86.ARCRQ)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = 1
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r

	case ssa.OpAMD64ADDQconst, ssa.OpAMD64ADDLconst:
		r := gc.SSARegNum(v)
		a := gc.SSARegNum(v.Args[0])
		if r == a {
			if v.AuxInt == 1 {
				var asm obj.As
				// Software optimization manual recommends add $1,reg.
				// But inc/dec is 1 byte smaller. ICC always uses inc
				// Clang/GCC choose depending on flags, but prefer add.
				// Experiments show that inc/dec is both a little faster
				// and make a binary a little smaller.
				if v.Op == ssa.OpAMD64ADDQconst {
					asm = x86.AINCQ
				} else {
					asm = x86.AINCL
				}
				p := gc.Prog(asm)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
				return
			}
			if v.AuxInt == -1 {
				var asm obj.As
				if v.Op == ssa.OpAMD64ADDQconst {
					asm = x86.ADECQ
				} else {
					asm = x86.ADECL
				}
				p := gc.Prog(asm)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
				return
			}
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_CONST
			p.From.Offset = v.AuxInt
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
			return
		}
		var asm obj.As
		if v.Op == ssa.OpAMD64ADDQconst {
			asm = x86.ALEAQ
		} else {
			asm = x86.ALEAL
		}
		p := gc.Prog(asm)
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = a
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r

	case ssa.OpAMD64CMOVQEQconst, ssa.OpAMD64CMOVLEQconst, ssa.OpAMD64CMOVWEQconst,
		ssa.OpAMD64CMOVQNEconst, ssa.OpAMD64CMOVLNEconst, ssa.OpAMD64CMOVWNEconst:
		r := gc.SSARegNum(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}

		// Constant into AX
		p := gc.Prog(moveByType(v.Type))
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x86.REG_AX

		p = gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = x86.REG_AX
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r

	case ssa.OpAMD64MULQconst, ssa.OpAMD64MULLconst:
		r := gc.SSARegNum(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
		// TODO: Teach doasm to compile the three-address multiply imul $c, r1, r2
		// then we don't need to use resultInArg0 for these ops.
		//p.From3 = new(obj.Addr)
		//p.From3.Type = obj.TYPE_REG
		//p.From3.Reg = gc.SSARegNum(v.Args[0])

	case ssa.OpAMD64SUBQconst, ssa.OpAMD64SUBLconst,
		ssa.OpAMD64ANDQconst, ssa.OpAMD64ANDLconst,
		ssa.OpAMD64ORQconst, ssa.OpAMD64ORLconst,
		ssa.OpAMD64XORQconst, ssa.OpAMD64XORLconst,
		ssa.OpAMD64SHLQconst, ssa.OpAMD64SHLLconst,
		ssa.OpAMD64SHRQconst, ssa.OpAMD64SHRLconst, ssa.OpAMD64SHRWconst, ssa.OpAMD64SHRBconst,
		ssa.OpAMD64SARQconst, ssa.OpAMD64SARLconst, ssa.OpAMD64SARWconst, ssa.OpAMD64SARBconst,
		ssa.OpAMD64ROLQconst, ssa.OpAMD64ROLLconst, ssa.OpAMD64ROLWconst, ssa.OpAMD64ROLBconst:
		r := gc.SSARegNum(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpAMD64SBBQcarrymask, ssa.OpAMD64SBBLcarrymask:
		r := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = r
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpAMD64LEAQ1, ssa.OpAMD64LEAQ2, ssa.OpAMD64LEAQ4, ssa.OpAMD64LEAQ8:
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		p := gc.Prog(x86.ALEAQ)
		switch v.Op {
		case ssa.OpAMD64LEAQ1:
			p.From.Scale = 1
			if i == x86.REG_SP {
				r, i = i, r
			}
		case ssa.OpAMD64LEAQ2:
			p.From.Scale = 2
		case ssa.OpAMD64LEAQ4:
			p.From.Scale = 4
		case ssa.OpAMD64LEAQ8:
			p.From.Scale = 8
		}
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = r
		p.From.Index = i
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64LEAQ, ssa.OpAMD64LEAL:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64CMPQ, ssa.OpAMD64CMPL, ssa.OpAMD64CMPW, ssa.OpAMD64CMPB,
		ssa.OpAMD64TESTQ, ssa.OpAMD64TESTL, ssa.OpAMD64TESTW, ssa.OpAMD64TESTB:
		opregreg(v.Op.Asm(), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[0]))
	case ssa.OpAMD64UCOMISS, ssa.OpAMD64UCOMISD:
		// Go assembler has swapped operands for UCOMISx relative to CMP,
		// must account for that right here.
		opregreg(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]))
	case ssa.OpAMD64CMPQconst, ssa.OpAMD64CMPLconst, ssa.OpAMD64CMPWconst, ssa.OpAMD64CMPBconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		p.To.Type = obj.TYPE_CONST
		p.To.Offset = v.AuxInt
	case ssa.OpAMD64TESTQconst, ssa.OpAMD64TESTLconst, ssa.OpAMD64TESTWconst, ssa.OpAMD64TESTBconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
	case ssa.OpAMD64MOVLconst, ssa.OpAMD64MOVQconst:
		x := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x
		// If flags are live at this instruction, suppress the
		// MOV $0,AX -> XOR AX,AX optimization.
		if v.Aux != nil {
			p.Mark |= x86.PRESERVEFLAGS
		}
	case ssa.OpAMD64MOVSSconst, ssa.OpAMD64MOVSDconst:
		x := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_FCONST
		p.From.Val = math.Float64frombits(uint64(v.AuxInt))
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x
	case ssa.OpAMD64MOVQload, ssa.OpAMD64MOVSSload, ssa.OpAMD64MOVSDload, ssa.OpAMD64MOVLload, ssa.OpAMD64MOVWload, ssa.OpAMD64MOVBload, ssa.OpAMD64MOVBQSXload, ssa.OpAMD64MOVWQSXload, ssa.OpAMD64MOVLQSXload, ssa.OpAMD64MOVOload:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVQloadidx8, ssa.OpAMD64MOVSDloadidx8:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 8
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVLloadidx4, ssa.OpAMD64MOVSSloadidx4:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 4
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVWloadidx2:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 2
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVBloadidx1, ssa.OpAMD64MOVWloadidx1, ssa.OpAMD64MOVLloadidx1, ssa.OpAMD64MOVQloadidx1, ssa.OpAMD64MOVSSloadidx1, ssa.OpAMD64MOVSDloadidx1:
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		if i == x86.REG_SP {
			r, i = i, r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = r
		p.From.Scale = 1
		p.From.Index = i
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVQstore, ssa.OpAMD64MOVSSstore, ssa.OpAMD64MOVSDstore, ssa.OpAMD64MOVLstore, ssa.OpAMD64MOVWstore, ssa.OpAMD64MOVBstore, ssa.OpAMD64MOVOstore:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVQstoreidx8, ssa.OpAMD64MOVSDstoreidx8:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 8
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVSSstoreidx4, ssa.OpAMD64MOVLstoreidx4:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 4
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVWstoreidx2:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 2
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVBstoreidx1, ssa.OpAMD64MOVWstoreidx1, ssa.OpAMD64MOVLstoreidx1, ssa.OpAMD64MOVQstoreidx1, ssa.OpAMD64MOVSSstoreidx1, ssa.OpAMD64MOVSDstoreidx1:
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		if i == x86.REG_SP {
			r, i = i, r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = r
		p.To.Scale = 1
		p.To.Index = i
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVQstoreconst, ssa.OpAMD64MOVLstoreconst, ssa.OpAMD64MOVWstoreconst, ssa.OpAMD64MOVBstoreconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		sc := v.AuxValAndOff()
		p.From.Offset = sc.Val()
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux2(&p.To, v, sc.Off())
	case ssa.OpAMD64MOVQstoreconstidx1, ssa.OpAMD64MOVQstoreconstidx8, ssa.OpAMD64MOVLstoreconstidx1, ssa.OpAMD64MOVLstoreconstidx4, ssa.OpAMD64MOVWstoreconstidx1, ssa.OpAMD64MOVWstoreconstidx2, ssa.OpAMD64MOVBstoreconstidx1:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		sc := v.AuxValAndOff()
		p.From.Offset = sc.Val()
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		switch v.Op {
		case ssa.OpAMD64MOVBstoreconstidx1, ssa.OpAMD64MOVWstoreconstidx1, ssa.OpAMD64MOVLstoreconstidx1, ssa.OpAMD64MOVQstoreconstidx1:
			p.To.Scale = 1
			if i == x86.REG_SP {
				r, i = i, r
			}
		case ssa.OpAMD64MOVWstoreconstidx2:
			p.To.Scale = 2
		case ssa.OpAMD64MOVLstoreconstidx4:
			p.To.Scale = 4
		case ssa.OpAMD64MOVQstoreconstidx8:
			p.To.Scale = 8
		}
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = r
		p.To.Index = i
		gc.AddAux2(&p.To, v, sc.Off())
	case ssa.OpAMD64MOVLQSX, ssa.OpAMD64MOVWQSX, ssa.OpAMD64MOVBQSX, ssa.OpAMD64MOVLQZX, ssa.OpAMD64MOVWQZX, ssa.OpAMD64MOVBQZX,
		ssa.OpAMD64CVTSL2SS, ssa.OpAMD64CVTSL2SD, ssa.OpAMD64CVTSQ2SS, ssa.OpAMD64CVTSQ2SD,
		ssa.OpAMD64CVTTSS2SL, ssa.OpAMD64CVTTSD2SL, ssa.OpAMD64CVTTSS2SQ, ssa.OpAMD64CVTTSD2SQ,
		ssa.OpAMD64CVTSS2SD, ssa.OpAMD64CVTSD2SS:
		opregreg(v.Op.Asm(), gc.SSARegNum(v), gc.SSARegNum(v.Args[0]))
	case ssa.OpAMD64DUFFZERO:
		off := duffStart(v.AuxInt)
		adj := duffAdj(v.AuxInt)
		var p *obj.Prog
		if adj != 0 {
			p = gc.Prog(x86.AADDQ)
			p.From.Type = obj.TYPE_CONST
			p.From.Offset = adj
			p.To.Type = obj.TYPE_REG
			p.To.Reg = x86.REG_DI
		}
		p = gc.Prog(obj.ADUFFZERO)
		p.To.Type = obj.TYPE_ADDR
		p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
		p.To.Offset = off
	case ssa.OpAMD64MOVOconst:
		if v.AuxInt != 0 {
			v.Unimplementedf("MOVOconst can only do constant=0")
		}
		r := gc.SSARegNum(v)
		opregreg(x86.AXORPS, r, r)
	case ssa.OpAMD64DUFFCOPY:
		p := gc.Prog(obj.ADUFFCOPY)
		p.To.Type = obj.TYPE_ADDR
		p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))
		p.To.Offset = v.AuxInt

	case ssa.OpCopy, ssa.OpAMD64MOVQconvert, ssa.OpAMD64MOVLconvert: // TODO: use MOVQreg for reg->reg copies instead of OpCopy?
		if v.Type.IsMemory() {
			return
		}
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v)
		if x != y {
			opregreg(moveByType(v.Type), y, x)
		}
	case ssa.OpLoadReg:
		if v.Type.IsFlags() {
			v.Unimplementedf("load flags not implemented: %v", v.LongString())
			return
		}
		p := gc.Prog(loadByType(v.Type))
		n, off := gc.AutoVar(v.Args[0])
		p.From.Type = obj.TYPE_MEM
		p.From.Node = n
		p.From.Sym = gc.Linksym(n.Sym)
		p.From.Offset = off
		if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
			p.From.Name = obj.NAME_PARAM
			p.From.Offset += n.Xoffset
		} else {
			p.From.Name = obj.NAME_AUTO
		}
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)

	case ssa.OpStoreReg:
		if v.Type.IsFlags() {
			v.Unimplementedf("store flags not implemented: %v", v.LongString())
			return
		}
		p := gc.Prog(storeByType(v.Type))
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		n, off := gc.AutoVar(v)
		p.To.Type = obj.TYPE_MEM
		p.To.Node = n
		p.To.Sym = gc.Linksym(n.Sym)
		p.To.Offset = off
		if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
			p.To.Name = obj.NAME_PARAM
			p.To.Offset += n.Xoffset
		} else {
			p.To.Name = obj.NAME_AUTO
		}
	case ssa.OpPhi:
		gc.CheckLoweredPhi(v)
	case ssa.OpInitMem:
		// memory arg needs no code
	case ssa.OpArg:
		// input args need no code
	case ssa.OpAMD64LoweredGetClosurePtr:
		// Closure pointer is DX.
		gc.CheckLoweredGetClosurePtr(v)
	case ssa.OpAMD64LoweredGetG:
		r := gc.SSARegNum(v)
		// See the comments in cmd/internal/obj/x86/obj6.go
		// near CanUse1InsnTLS for a detailed explanation of these instructions.
		if x86.CanUse1InsnTLS(gc.Ctxt) {
			// MOVQ (TLS), r
			p := gc.Prog(x86.AMOVQ)
			p.From.Type = obj.TYPE_MEM
			p.From.Reg = x86.REG_TLS
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		} else {
			// MOVQ TLS, r
			// MOVQ (r)(TLS*1), r
			p := gc.Prog(x86.AMOVQ)
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x86.REG_TLS
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
			q := gc.Prog(x86.AMOVQ)
			q.From.Type = obj.TYPE_MEM
			q.From.Reg = r
			q.From.Index = x86.REG_TLS
			q.From.Scale = 1
			q.To.Type = obj.TYPE_REG
			q.To.Reg = r
		}
	case ssa.OpAMD64CALLstatic:
		if v.Aux.(*gc.Sym) == gc.Deferreturn.Sym {
			// Deferred calls will appear to be returning to
			// the CALL deferreturn(SB) that we are about to emit.
			// However, the stack trace code will show the line
			// of the instruction byte before the return PC.
			// To avoid that being an unrelated instruction,
			// insert an actual hardware NOP that will have the right line number.
			// This is different from obj.ANOP, which is a virtual no-op
			// that doesn't make it into the instruction stream.
			ginsnop()
		}
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(v.Aux.(*gc.Sym))
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLclosure:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLdefer:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(gc.Deferproc.Sym)
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLgo:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(gc.Newproc.Sym)
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLinter:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64NEGQ, ssa.OpAMD64NEGL,
		ssa.OpAMD64BSWAPQ, ssa.OpAMD64BSWAPL,
		ssa.OpAMD64NOTQ, ssa.OpAMD64NOTL:
		r := gc.SSARegNum(v)
		if r != gc.SSARegNum(v.Args[0]) {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpAMD64BSFQ, ssa.OpAMD64BSFL, ssa.OpAMD64BSFW,
		ssa.OpAMD64BSRQ, ssa.OpAMD64BSRL, ssa.OpAMD64BSRW,
		ssa.OpAMD64SQRTSD:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpSP, ssa.OpSB:
		// nothing to do
	case ssa.OpSelect0, ssa.OpSelect1:
		// nothing to do
	case ssa.OpAMD64SETEQ, ssa.OpAMD64SETNE,
		ssa.OpAMD64SETL, ssa.OpAMD64SETLE,
		ssa.OpAMD64SETG, ssa.OpAMD64SETGE,
		ssa.OpAMD64SETGF, ssa.OpAMD64SETGEF,
		ssa.OpAMD64SETB, ssa.OpAMD64SETBE,
		ssa.OpAMD64SETORD, ssa.OpAMD64SETNAN,
		ssa.OpAMD64SETA, ssa.OpAMD64SETAE:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)

	case ssa.OpAMD64SETNEF:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
		q := gc.Prog(x86.ASETPS)
		q.To.Type = obj.TYPE_REG
		q.To.Reg = x86.REG_AX
		// ORL avoids partial register write and is smaller than ORQ, used by old compiler
		opregreg(x86.AORL, gc.SSARegNum(v), x86.REG_AX)

	case ssa.OpAMD64SETEQF:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
		q := gc.Prog(x86.ASETPC)
		q.To.Type = obj.TYPE_REG
		q.To.Reg = x86.REG_AX
		// ANDL avoids partial register write and is smaller than ANDQ, used by old compiler
		opregreg(x86.AANDL, gc.SSARegNum(v), x86.REG_AX)

	case ssa.OpAMD64InvertFlags:
		v.Fatalf("InvertFlags should never make it to codegen %v", v.LongString())
	case ssa.OpAMD64FlagEQ, ssa.OpAMD64FlagLT_ULT, ssa.OpAMD64FlagLT_UGT, ssa.OpAMD64FlagGT_ULT, ssa.OpAMD64FlagGT_UGT:
		v.Fatalf("Flag* ops should never make it to codegen %v", v.LongString())
	case ssa.OpAMD64REPSTOSQ:
		gc.Prog(x86.AREP)
		gc.Prog(x86.ASTOSQ)
	case ssa.OpAMD64REPMOVSQ:
		gc.Prog(x86.AREP)
		gc.Prog(x86.AMOVSQ)
	case ssa.OpVarDef:
		gc.Gvardef(v.Aux.(*gc.Node))
	case ssa.OpVarKill:
		gc.Gvarkill(v.Aux.(*gc.Node))
	case ssa.OpVarLive:
		gc.Gvarlive(v.Aux.(*gc.Node))
	case ssa.OpKeepAlive:
		if !v.Args[0].Type.IsPtrShaped() {
			v.Fatalf("keeping non-pointer alive %v", v.Args[0])
		}
		n, off := gc.AutoVar(v.Args[0])
		if n == nil {
			v.Fatalf("KeepLive with non-spilled value %s %s", v, v.Args[0])
		}
		if off != 0 {
			v.Fatalf("KeepLive with non-zero offset spill location %s:%d", n, off)
		}
		gc.Gvarlive(n)
	case ssa.OpAMD64LoweredNilCheck:
		// Optimization - if the subsequent block has a load or store
		// at the same address, we don't need to issue this instruction.
		mem := v.Args[1]
		for _, w := range v.Block.Succs[0].Block().Values {
			if w.Op == ssa.OpPhi {
				if w.Type.IsMemory() {
					mem = w
				}
				continue
			}
			if len(w.Args) == 0 || !w.Args[len(w.Args)-1].Type.IsMemory() {
				// w doesn't use a store - can't be a memory op.
				continue
			}
			if w.Args[len(w.Args)-1] != mem {
				v.Fatalf("wrong store after nilcheck v=%s w=%s", v, w)
			}
			switch w.Op {
			case ssa.OpAMD64MOVQload, ssa.OpAMD64MOVLload, ssa.OpAMD64MOVWload, ssa.OpAMD64MOVBload,
				ssa.OpAMD64MOVQstore, ssa.OpAMD64MOVLstore, ssa.OpAMD64MOVWstore, ssa.OpAMD64MOVBstore,
				ssa.OpAMD64MOVBQSXload, ssa.OpAMD64MOVWQSXload, ssa.OpAMD64MOVLQSXload,
				ssa.OpAMD64MOVSSload, ssa.OpAMD64MOVSDload, ssa.OpAMD64MOVOload,
				ssa.OpAMD64MOVSSstore, ssa.OpAMD64MOVSDstore, ssa.OpAMD64MOVOstore:
				if w.Args[0] == v.Args[0] && w.Aux == nil && w.AuxInt >= 0 && w.AuxInt < minZeroPage {
					if gc.Debug_checknil != 0 && int(v.Line) > 1 {
						gc.Warnl(v.Line, "removed nil check")
					}
					return
				}
			case ssa.OpAMD64MOVQstoreconst, ssa.OpAMD64MOVLstoreconst, ssa.OpAMD64MOVWstoreconst, ssa.OpAMD64MOVBstoreconst:
				off := ssa.ValAndOff(v.AuxInt).Off()
				if w.Args[0] == v.Args[0] && w.Aux == nil && off >= 0 && off < minZeroPage {
					if gc.Debug_checknil != 0 && int(v.Line) > 1 {
						gc.Warnl(v.Line, "removed nil check")
					}
					return
				}
			}
			if w.Type.IsMemory() {
				if w.Op == ssa.OpVarDef || w.Op == ssa.OpVarKill || w.Op == ssa.OpVarLive {
					// these ops are OK
					mem = w
					continue
				}
				// We can't delay the nil check past the next store.
				break
			}
		}
		// Issue a load which will fault if the input is nil.
		// TODO: We currently use the 2-byte instruction TESTB AX, (reg).
		// Should we use the 3-byte TESTB $0, (reg) instead?  It is larger
		// but it doesn't have false dependency on AX.
		// Or maybe allocate an output register and use MOVL (reg),reg2 ?
		// That trades clobbering flags for clobbering a register.
		p := gc.Prog(x86.ATESTB)
		p.From.Type = obj.TYPE_REG
		p.From.Reg = x86.REG_AX
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.To, v)
		if gc.Debug_checknil != 0 && v.Line > 1 { // v.Line==1 in generated wrappers
			gc.Warnl(v.Line, "generated nil check")
		}
	default:
		v.Unimplementedf("genValue not implemented: %s", v.LongString())
	}
}
示例#4
0
文件: ssa.go 项目: kuangchanglang/go
func ssaGenValue(s *gc.SSAGenState, v *ssa.Value) {
	s.SetLineno(v.Line)
	switch v.Op {
	case ssa.OpS390XSLD, ssa.OpS390XSLW,
		ssa.OpS390XSRD, ssa.OpS390XSRW,
		ssa.OpS390XSRAD, ssa.OpS390XSRAW:
		r := v.Reg()
		r1 := v.Args[0].Reg()
		r2 := v.Args[1].Reg()
		if r2 == s390x.REG_R0 {
			v.Fatalf("cannot use R0 as shift value %s", v.LongString())
		}
		p := opregreg(v.Op.Asm(), r, r2)
		if r != r1 {
			p.Reg = r1
		}
	case ssa.OpS390XADD, ssa.OpS390XADDW,
		ssa.OpS390XSUB, ssa.OpS390XSUBW,
		ssa.OpS390XAND, ssa.OpS390XANDW,
		ssa.OpS390XOR, ssa.OpS390XORW,
		ssa.OpS390XXOR, ssa.OpS390XXORW:
		r := v.Reg()
		r1 := v.Args[0].Reg()
		r2 := v.Args[1].Reg()
		p := opregreg(v.Op.Asm(), r, r2)
		if r != r1 {
			p.Reg = r1
		}
	// 2-address opcode arithmetic
	case ssa.OpS390XMULLD, ssa.OpS390XMULLW,
		ssa.OpS390XMULHD, ssa.OpS390XMULHDU,
		ssa.OpS390XFADDS, ssa.OpS390XFADD, ssa.OpS390XFSUBS, ssa.OpS390XFSUB,
		ssa.OpS390XFMULS, ssa.OpS390XFMUL, ssa.OpS390XFDIVS, ssa.OpS390XFDIV:
		r := v.Reg()
		if r != v.Args[0].Reg() {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		opregreg(v.Op.Asm(), r, v.Args[1].Reg())
	case ssa.OpS390XDIVD, ssa.OpS390XDIVW,
		ssa.OpS390XDIVDU, ssa.OpS390XDIVWU,
		ssa.OpS390XMODD, ssa.OpS390XMODW,
		ssa.OpS390XMODDU, ssa.OpS390XMODWU:

		// TODO(mundaym): use the temp registers every time like x86 does with AX?
		dividend := v.Args[0].Reg()
		divisor := v.Args[1].Reg()

		// CPU faults upon signed overflow, which occurs when most
		// negative int is divided by -1.
		var j *obj.Prog
		if v.Op == ssa.OpS390XDIVD || v.Op == ssa.OpS390XDIVW ||
			v.Op == ssa.OpS390XMODD || v.Op == ssa.OpS390XMODW {

			var c *obj.Prog
			c = gc.Prog(s390x.ACMP)
			j = gc.Prog(s390x.ABEQ)

			c.From.Type = obj.TYPE_REG
			c.From.Reg = divisor
			c.To.Type = obj.TYPE_CONST
			c.To.Offset = -1

			j.To.Type = obj.TYPE_BRANCH

		}

		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = divisor
		p.Reg = 0
		p.To.Type = obj.TYPE_REG
		p.To.Reg = dividend

		// signed division, rest of the check for -1 case
		if j != nil {
			j2 := gc.Prog(s390x.ABR)
			j2.To.Type = obj.TYPE_BRANCH

			var n *obj.Prog
			if v.Op == ssa.OpS390XDIVD || v.Op == ssa.OpS390XDIVW {
				// n * -1 = -n
				n = gc.Prog(s390x.ANEG)
				n.To.Type = obj.TYPE_REG
				n.To.Reg = dividend
			} else {
				// n % -1 == 0
				n = gc.Prog(s390x.AXOR)
				n.From.Type = obj.TYPE_REG
				n.From.Reg = dividend
				n.To.Type = obj.TYPE_REG
				n.To.Reg = dividend
			}

			j.To.Val = n
			j2.To.Val = s.Pc()
		}
	case ssa.OpS390XADDconst, ssa.OpS390XADDWconst:
		opregregimm(v.Op.Asm(), v.Reg(), v.Args[0].Reg(), v.AuxInt)
	case ssa.OpS390XMULLDconst, ssa.OpS390XMULLWconst,
		ssa.OpS390XSUBconst, ssa.OpS390XSUBWconst,
		ssa.OpS390XANDconst, ssa.OpS390XANDWconst,
		ssa.OpS390XORconst, ssa.OpS390XORWconst,
		ssa.OpS390XXORconst, ssa.OpS390XXORWconst:
		r := v.Reg()
		if r != v.Args[0].Reg() {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpS390XSLDconst, ssa.OpS390XSLWconst,
		ssa.OpS390XSRDconst, ssa.OpS390XSRWconst,
		ssa.OpS390XSRADconst, ssa.OpS390XSRAWconst,
		ssa.OpS390XRLLGconst, ssa.OpS390XRLLconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		r := v.Reg()
		r1 := v.Args[0].Reg()
		if r != r1 {
			p.Reg = r1
		}
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpS390XSUBEcarrymask, ssa.OpS390XSUBEWcarrymask:
		r := v.Reg()
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = r
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpS390XMOVDaddridx:
		r := v.Args[0].Reg()
		i := v.Args[1].Reg()
		p := gc.Prog(s390x.AMOVD)
		p.From.Scale = 1
		if i == s390x.REGSP {
			r, i = i, r
		}
		p.From.Type = obj.TYPE_ADDR
		p.From.Reg = r
		p.From.Index = i
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = v.Reg()
	case ssa.OpS390XMOVDaddr:
		p := gc.Prog(s390x.AMOVD)
		p.From.Type = obj.TYPE_ADDR
		p.From.Reg = v.Args[0].Reg()
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = v.Reg()
	case ssa.OpS390XCMP, ssa.OpS390XCMPW, ssa.OpS390XCMPU, ssa.OpS390XCMPWU:
		opregreg(v.Op.Asm(), v.Args[1].Reg(), v.Args[0].Reg())
	case ssa.OpS390XFCMPS, ssa.OpS390XFCMP:
		opregreg(v.Op.Asm(), v.Args[1].Reg(), v.Args[0].Reg())
	case ssa.OpS390XCMPconst, ssa.OpS390XCMPWconst, ssa.OpS390XCMPUconst, ssa.OpS390XCMPWUconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = v.Args[0].Reg()
		p.To.Type = obj.TYPE_CONST
		p.To.Offset = v.AuxInt
	case ssa.OpS390XMOVDconst:
		x := v.Reg()
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x
	case ssa.OpS390XFMOVSconst, ssa.OpS390XFMOVDconst:
		x := v.Reg()
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_FCONST
		p.From.Val = math.Float64frombits(uint64(v.AuxInt))
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x
	case ssa.OpS390XMOVDload,
		ssa.OpS390XMOVWZload, ssa.OpS390XMOVHZload, ssa.OpS390XMOVBZload,
		ssa.OpS390XMOVDBRload, ssa.OpS390XMOVWBRload, ssa.OpS390XMOVHBRload,
		ssa.OpS390XMOVBload, ssa.OpS390XMOVHload, ssa.OpS390XMOVWload,
		ssa.OpS390XFMOVSload, ssa.OpS390XFMOVDload:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = v.Args[0].Reg()
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = v.Reg()
	case ssa.OpS390XMOVBZloadidx, ssa.OpS390XMOVHZloadidx, ssa.OpS390XMOVWZloadidx, ssa.OpS390XMOVDloadidx,
		ssa.OpS390XMOVHBRloadidx, ssa.OpS390XMOVWBRloadidx, ssa.OpS390XMOVDBRloadidx,
		ssa.OpS390XFMOVSloadidx, ssa.OpS390XFMOVDloadidx:
		r := v.Args[0].Reg()
		i := v.Args[1].Reg()
		if i == s390x.REGSP {
			r, i = i, r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = r
		p.From.Scale = 1
		p.From.Index = i
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = v.Reg()
	case ssa.OpS390XMOVBstore, ssa.OpS390XMOVHstore, ssa.OpS390XMOVWstore, ssa.OpS390XMOVDstore,
		ssa.OpS390XMOVHBRstore, ssa.OpS390XMOVWBRstore, ssa.OpS390XMOVDBRstore,
		ssa.OpS390XFMOVSstore, ssa.OpS390XFMOVDstore:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = v.Args[1].Reg()
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = v.Args[0].Reg()
		gc.AddAux(&p.To, v)
	case ssa.OpS390XMOVBstoreidx, ssa.OpS390XMOVHstoreidx, ssa.OpS390XMOVWstoreidx, ssa.OpS390XMOVDstoreidx,
		ssa.OpS390XMOVHBRstoreidx, ssa.OpS390XMOVWBRstoreidx, ssa.OpS390XMOVDBRstoreidx,
		ssa.OpS390XFMOVSstoreidx, ssa.OpS390XFMOVDstoreidx:
		r := v.Args[0].Reg()
		i := v.Args[1].Reg()
		if i == s390x.REGSP {
			r, i = i, r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = v.Args[2].Reg()
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = r
		p.To.Scale = 1
		p.To.Index = i
		gc.AddAux(&p.To, v)
	case ssa.OpS390XMOVDstoreconst, ssa.OpS390XMOVWstoreconst, ssa.OpS390XMOVHstoreconst, ssa.OpS390XMOVBstoreconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		sc := v.AuxValAndOff()
		p.From.Offset = sc.Val()
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = v.Args[0].Reg()
		gc.AddAux2(&p.To, v, sc.Off())
	case ssa.OpS390XMOVBreg, ssa.OpS390XMOVHreg, ssa.OpS390XMOVWreg,
		ssa.OpS390XMOVBZreg, ssa.OpS390XMOVHZreg, ssa.OpS390XMOVWZreg,
		ssa.OpS390XCEFBRA, ssa.OpS390XCDFBRA, ssa.OpS390XCEGBRA, ssa.OpS390XCDGBRA,
		ssa.OpS390XCFEBRA, ssa.OpS390XCFDBRA, ssa.OpS390XCGEBRA, ssa.OpS390XCGDBRA,
		ssa.OpS390XLDEBR, ssa.OpS390XLEDBR,
		ssa.OpS390XFNEG, ssa.OpS390XFNEGS:
		opregreg(v.Op.Asm(), v.Reg(), v.Args[0].Reg())
	case ssa.OpS390XCLEAR:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		sc := v.AuxValAndOff()
		p.From.Offset = sc.Val()
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = v.Args[0].Reg()
		gc.AddAux2(&p.To, v, sc.Off())
	case ssa.OpCopy, ssa.OpS390XMOVDconvert:
		if v.Type.IsMemory() {
			return
		}
		x := v.Args[0].Reg()
		y := v.Reg()
		if x != y {
			opregreg(moveByType(v.Type), y, x)
		}
	case ssa.OpLoadReg:
		if v.Type.IsFlags() {
			v.Fatalf("load flags not implemented: %v", v.LongString())
			return
		}
		p := gc.Prog(loadByType(v.Type))
		gc.AddrAuto(&p.From, v.Args[0])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = v.Reg()
	case ssa.OpStoreReg:
		if v.Type.IsFlags() {
			v.Fatalf("store flags not implemented: %v", v.LongString())
			return
		}
		p := gc.Prog(storeByType(v.Type))
		p.From.Type = obj.TYPE_REG
		p.From.Reg = v.Args[0].Reg()
		gc.AddrAuto(&p.To, v)
	case ssa.OpPhi:
		gc.CheckLoweredPhi(v)
	case ssa.OpInitMem:
		// memory arg needs no code
	case ssa.OpArg:
		// input args need no code
	case ssa.OpS390XLoweredGetClosurePtr:
		// Closure pointer is R12 (already)
		gc.CheckLoweredGetClosurePtr(v)
	case ssa.OpS390XLoweredGetG:
		r := v.Reg()
		p := gc.Prog(s390x.AMOVD)
		p.From.Type = obj.TYPE_REG
		p.From.Reg = s390x.REGG
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpS390XCALLstatic:
		if v.Aux.(*gc.Sym) == gc.Deferreturn.Sym {
			// Deferred calls will appear to be returning to
			// the CALL deferreturn(SB) that we are about to emit.
			// However, the stack trace code will show the line
			// of the instruction byte before the return PC.
			// To avoid that being an unrelated instruction,
			// insert an actual hardware NOP that will have the right line number.
			// This is different from obj.ANOP, which is a virtual no-op
			// that doesn't make it into the instruction stream.
			ginsnop()
		}
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(v.Aux.(*gc.Sym))
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpS390XCALLclosure:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = v.Args[0].Reg()
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpS390XCALLdefer:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(gc.Deferproc.Sym)
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpS390XCALLgo:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(gc.Newproc.Sym)
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpS390XCALLinter:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = v.Args[0].Reg()
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpS390XFLOGR, ssa.OpS390XNEG, ssa.OpS390XNEGW,
		ssa.OpS390XMOVWBR, ssa.OpS390XMOVDBR:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = v.Args[0].Reg()
		p.To.Type = obj.TYPE_REG
		p.To.Reg = v.Reg()
	case ssa.OpS390XNOT, ssa.OpS390XNOTW:
		v.Fatalf("NOT/NOTW generated %s", v.LongString())
	case ssa.OpS390XMOVDEQ, ssa.OpS390XMOVDNE,
		ssa.OpS390XMOVDLT, ssa.OpS390XMOVDLE,
		ssa.OpS390XMOVDGT, ssa.OpS390XMOVDGE,
		ssa.OpS390XMOVDGTnoinv, ssa.OpS390XMOVDGEnoinv:
		r := v.Reg()
		if r != v.Args[0].Reg() {
			v.Fatalf("input[0] and output not in same register %s", v.LongString())
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = v.Args[1].Reg()
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpS390XFSQRT:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = v.Args[0].Reg()
		p.To.Type = obj.TYPE_REG
		p.To.Reg = v.Reg()
	case ssa.OpSP, ssa.OpSB:
		// nothing to do
	case ssa.OpVarDef:
		gc.Gvardef(v.Aux.(*gc.Node))
	case ssa.OpVarKill:
		gc.Gvarkill(v.Aux.(*gc.Node))
	case ssa.OpVarLive:
		gc.Gvarlive(v.Aux.(*gc.Node))
	case ssa.OpKeepAlive:
		gc.KeepAlive(v)
	case ssa.OpS390XInvertFlags:
		v.Fatalf("InvertFlags should never make it to codegen %v", v.LongString())
	case ssa.OpS390XFlagEQ, ssa.OpS390XFlagLT, ssa.OpS390XFlagGT:
		v.Fatalf("Flag* ops should never make it to codegen %v", v.LongString())
	case ssa.OpS390XLoweredNilCheck:
		// Issue a load which will fault if the input is nil.
		p := gc.Prog(s390x.AMOVBZ)
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = v.Args[0].Reg()
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = s390x.REGTMP
		if gc.Debug_checknil != 0 && v.Line > 1 { // v.Line==1 in generated wrappers
			gc.Warnl(v.Line, "generated nil check")
		}
	case ssa.OpS390XMVC:
		vo := v.AuxValAndOff()
		p := gc.Prog(s390x.AMVC)
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = v.Args[1].Reg()
		p.From.Offset = vo.Off()
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = v.Args[0].Reg()
		p.To.Offset = vo.Off()
		p.From3 = new(obj.Addr)
		p.From3.Type = obj.TYPE_CONST
		p.From3.Offset = vo.Val()
	case ssa.OpS390XSTMG2, ssa.OpS390XSTMG3, ssa.OpS390XSTMG4,
		ssa.OpS390XSTM2, ssa.OpS390XSTM3, ssa.OpS390XSTM4:
		for i := 2; i < len(v.Args)-1; i++ {
			if v.Args[i].Reg() != v.Args[i-1].Reg()+1 {
				v.Fatalf("invalid store multiple %s", v.LongString())
			}
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = v.Args[1].Reg()
		p.Reg = v.Args[len(v.Args)-2].Reg()
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = v.Args[0].Reg()
		gc.AddAux(&p.To, v)
	case ssa.OpS390XLoweredMove:
		// Inputs must be valid pointers to memory,
		// so adjust arg0 and arg1 as part of the expansion.
		// arg2 should be src+size,
		//
		// mvc: MVC  $256, 0(R2), 0(R1)
		//      MOVD $256(R1), R1
		//      MOVD $256(R2), R2
		//      CMP  R2, Rarg2
		//      BNE  mvc
		//      MVC  $rem, 0(R2), 0(R1) // if rem > 0
		// arg2 is the last address to move in the loop + 256
		mvc := gc.Prog(s390x.AMVC)
		mvc.From.Type = obj.TYPE_MEM
		mvc.From.Reg = v.Args[1].Reg()
		mvc.To.Type = obj.TYPE_MEM
		mvc.To.Reg = v.Args[0].Reg()
		mvc.From3 = new(obj.Addr)
		mvc.From3.Type = obj.TYPE_CONST
		mvc.From3.Offset = 256

		for i := 0; i < 2; i++ {
			movd := gc.Prog(s390x.AMOVD)
			movd.From.Type = obj.TYPE_ADDR
			movd.From.Reg = v.Args[i].Reg()
			movd.From.Offset = 256
			movd.To.Type = obj.TYPE_REG
			movd.To.Reg = v.Args[i].Reg()
		}

		cmpu := gc.Prog(s390x.ACMPU)
		cmpu.From.Reg = v.Args[1].Reg()
		cmpu.From.Type = obj.TYPE_REG
		cmpu.To.Reg = v.Args[2].Reg()
		cmpu.To.Type = obj.TYPE_REG

		bne := gc.Prog(s390x.ABLT)
		bne.To.Type = obj.TYPE_BRANCH
		gc.Patch(bne, mvc)

		if v.AuxInt > 0 {
			mvc := gc.Prog(s390x.AMVC)
			mvc.From.Type = obj.TYPE_MEM
			mvc.From.Reg = v.Args[1].Reg()
			mvc.To.Type = obj.TYPE_MEM
			mvc.To.Reg = v.Args[0].Reg()
			mvc.From3 = new(obj.Addr)
			mvc.From3.Type = obj.TYPE_CONST
			mvc.From3.Offset = v.AuxInt
		}
	case ssa.OpS390XLoweredZero:
		// Input must be valid pointers to memory,
		// so adjust arg0 as part of the expansion.
		// arg1 should be src+size,
		//
		// clear: CLEAR $256, 0(R1)
		//        MOVD  $256(R1), R1
		//        CMP   R1, Rarg1
		//        BNE   clear
		//        CLEAR $rem, 0(R1) // if rem > 0
		// arg1 is the last address to zero in the loop + 256
		clear := gc.Prog(s390x.ACLEAR)
		clear.From.Type = obj.TYPE_CONST
		clear.From.Offset = 256
		clear.To.Type = obj.TYPE_MEM
		clear.To.Reg = v.Args[0].Reg()

		movd := gc.Prog(s390x.AMOVD)
		movd.From.Type = obj.TYPE_ADDR
		movd.From.Reg = v.Args[0].Reg()
		movd.From.Offset = 256
		movd.To.Type = obj.TYPE_REG
		movd.To.Reg = v.Args[0].Reg()

		cmpu := gc.Prog(s390x.ACMPU)
		cmpu.From.Reg = v.Args[0].Reg()
		cmpu.From.Type = obj.TYPE_REG
		cmpu.To.Reg = v.Args[1].Reg()
		cmpu.To.Type = obj.TYPE_REG

		bne := gc.Prog(s390x.ABLT)
		bne.To.Type = obj.TYPE_BRANCH
		gc.Patch(bne, clear)

		if v.AuxInt > 0 {
			clear := gc.Prog(s390x.ACLEAR)
			clear.From.Type = obj.TYPE_CONST
			clear.From.Offset = v.AuxInt
			clear.To.Type = obj.TYPE_MEM
			clear.To.Reg = v.Args[0].Reg()
		}
	default:
		v.Fatalf("genValue not implemented: %s", v.LongString())
	}
}