// take a sample of this liquid to be used to make the solution up to
// a particular total volume
func SampleForTotalVolume(l wtype.Liquid, v wunit.Volume) *wtype.LHComponent {
ret := wtype.NewLHComponent()
ret.CName = l.Name()
ret.Tvol = v.RawValue()
ret.Vunit = v.Unit().PrefixedSymbol()
ret.LContainer = l.Container().(*wtype.LHWell)
ret.CName = l.Name()
ret.Extra = l.GetExtra()
ret.Smax = l.GetSmax()
ret.Visc = l.GetVisc()
return ret
}
func (lhc *LHComponent) Sample(v wunit.Volume) Liquid {
// need to jig around with units a bit here
// Should probably just make Vunit, Cunit etc. wunits anyway
meas := wunit.ConcreteMeasurement{lhc.Vol, wunit.ParsePrefixedUnit(lhc.Vunit)}
// we need some logic potentially
if v.SIValue() > meas.SIValue() {
wutil.Error(errors.New(fmt.Sprintf("LHComponent ID: %s Not enough volume for sample", lhc.ID)))
} else if v.SIValue() == meas.SIValue() {
return lhc
}
smp := CopyLHComponent(lhc)
// need a convention here
smp.Vol = v.RawValue()
smp.Vunit = v.Unit().PrefixedSymbol()
meas.Subtract(&v.ConcreteMeasurement)
lhc.Vol = meas.RawValue()
return smp
}
func solution_setup(request *LHRequest, prms *liquidhandling.LHProperties) (map[string]*wtype.LHSolution, map[string]float64) {
solutions := request.Output_solutions
// index of components used to make up to a total volume, along with the required total
mtvols := make(map[string][]float64, 10)
// index of components with concentration targets, along with the target concentrations
mconcs := make(map[string][]float64, 10)
// keep a list of components which have fixed stock concentrations
fixconcs := make([]*wtype.LHComponent, 0)
// maximum solubilities of each component
Smax := make(map[string]float64, 10)
// maximum total volume of any solution containing each component
hshTVol := make(map[string]float64)
// find the minimum and maximum required concentrations
// across all the solutions
for _, solution := range solutions {
components := solution.Components
// we need to identify the concentration components
// and the total volume components, if we have
// concentrations but no tvols we have to return
// an error
arrCncs := make([]*wtype.LHComponent, 0, len(components))
arrTvol := make([]*wtype.LHComponent, 0, len(components))
cmpvol := 0.0
totalvol := 0.0
for _, component := range components {
// what sort of component is it?
conc := component.Conc
tvol := component.Tvol
if conc != 0.0 {
arrCncs = append(arrCncs, component)
} else if tvol != 0.0 {
tv := component.Tvol
if totalvol == 0.0 || totalvol == tv {
totalvol = tv
} else {
// error
wutil.Error(errors.New(fmt.Sprintf("Inconsistent total volumes %-6.4f and %-6.4f at component %s", totalvol, tv, component.Name)))
}
} else {
cmpvol += component.Vol
}
}
// add everything to the maps
for _, cmp := range arrCncs {
nm := cmp.CName
cnc := cmp.Conc
_, ok := Smax[nm]
if !ok {
Smax[nm] = cmp.Smax
}
if cmp.StockConcentration != 0.0 {
fixconcs = append(fixconcs, cmp)
continue
}
var cncslc []float64
cncslc, ok = mconcs[nm]
if !ok {
cncslc = make([]float64, 0, 10)
}
cncslc = append(cncslc, cnc)
mconcs[nm] = cncslc
_, ok = hshTVol[nm]
if !ok || hshTVol[nm] > totalvol {
hshTVol[nm] = totalvol
}
}
// now the total volumes
for _, cmp := range arrTvol {
nm := cmp.CName
tvol := cmp.Tvol
var tvslc []float64
tvslc, ok := mtvols[nm]
if !ok {
tvslc = make([]float64, 0, 10)
}
tvslc = append(tvslc, tvol)
mtvols[nm] = tvslc
}
} // end solutions
// so now we should be able to make stock concentrations
// first we need the min and max for each
minrequired := make(map[string]float64, len(mconcs))
maxrequired := make(map[string]float64, len(mconcs))
//TODO this needs to be migrated elsewhere
var vmin wunit.Volume = wunit.NewVolume(1.0, "ul")
if prms.CurrConf != nil {
vmin = *(prms.CurrConf.Minvol)
}
for cmp, arr := range mconcs {
min := wutil.FMin(arr)
max := wutil.FMax(arr)
minrequired[cmp] = min
maxrequired[cmp] = max
// if smax undefined we need to deal - we assume infinite solubility!!
_, ok := Smax[cmp]
if !ok {
Smax[cmp] = 9999999
wutil.Warn(fmt.Sprintf("Max solubility undefined for component %s -- assuming infinite solubility!", cmp))
}
}
stockconcs := choose_stock_concentrations(minrequired, maxrequired, Smax, vmin.RawValue(), hshTVol)
// handle any errors here
// add the fixed concentrations into stockconcs
for _, cmp := range fixconcs {
stockconcs[cmp.CName] = cmp.StockConcentration
}
// nearly there now! Need to turn all the components into volumes, then we're done
// make an array for the new solutions
newSolutions := make(map[string]*wtype.LHSolution, len(solutions))
for _, solution := range solutions {
components := solution.Components
arrCncs := make([]*wtype.LHComponent, 0, len(components))
arrTvol := make([]*wtype.LHComponent, 0, len(components))
arrSvol := make([]*wtype.LHComponent, 0, len(components))
cmpvol := 0.0
totalvol := 0.0
totalvolunit := ""
for _, component := range components {
// what sort of component is it?
// what is the total volume ?
if component.Conc != 0.0 {
arrCncs = append(arrCncs, component)
} else if component.Tvol != 0.0 {
arrTvol = append(arrTvol, component)
tv := component.Tvol
totalvolunit = component.Vunit
if totalvol == 0.0 || totalvol == tv {
totalvol = tv
} else {
// error
wutil.Error(errors.New(fmt.Sprintf("Inconsistent total volumes %-6.4f and %-6.4f at component %s", totalvol, tv, component.Name)))
}
} else {
// need to add in the volume taken up by any volume components
cmpvol += component.Vol
arrSvol = append(arrSvol, component)
}
}
// first we add the volumes to the concentration components
arrFinalComponents := make([]*wtype.LHComponent, 0, len(components))
for _, component := range arrCncs {
name := component.CName
cnc := component.Conc
vol := totalvol * cnc / stockconcs[name]
cmpvol += vol
component.Vol = vol
component.Vunit = totalvolunit
component.StockConcentration = stockconcs[name]
arrFinalComponents = append(arrFinalComponents, component)
}
// next we get the final volume for total volume components
for _, component := range arrTvol {
vol := totalvol - cmpvol
component.Vol = vol
arrFinalComponents = append(arrFinalComponents, component)
}
// then we add the rest
arrFinalComponents = append(arrFinalComponents, arrSvol...)
// finally we replace the components in this solution
solution.Components = arrFinalComponents
// and put the new solution in the array
newSolutions[solution.ID] = solution
}
return newSolutions, stockconcs
}