// Send implements the batch.Sender interface. If the request is part of a
// transaction, the TxnCoordSender adds the transaction to a map of active
// transactions and begins heartbeating it. Every subsequent request for the
// same transaction updates the lastUpdate timestamp to prevent live
// transactions from being considered abandoned and garbage collected.
// Read/write mutating requests have their key or key range added to the
// transaction's interval tree of key ranges for eventual cleanup via resolved
// write intents; they're tagged to an outgoing EndTransaction request, with
// the receiving replica in charge of resolving them.
func (tc *TxnCoordSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
{
// Start new or pick up active trace and embed its trace metadata into
// header for use by RPC recipients. From here on, there's always an active
// Trace, though its overhead is small unless it's sampled.
sp := opentracing.SpanFromContext(ctx)
if sp == nil {
sp = tc.tracer.StartSpan(opTxnCoordSender)
defer sp.Finish()
ctx = opentracing.ContextWithSpan(ctx, sp)
}
// TODO(tschottdorf): To get rid of the spurious alloc below we need to
// implement the carrier interface on ba.Header or make Span non-nullable,
// both of which force all of ba on the Heap. It's already there, so may
// not be a big deal, but ba should live on the stack. Also not easy to use
// a buffer pool here since anything that goes into the RPC layer could be
// used by goroutines we didn't wait for.
if ba.Header.Trace == nil {
ba.Header.Trace = &tracing.Span{}
}
if err := tc.tracer.Inject(sp, basictracer.Delegator, ba.Trace); err != nil {
return nil, roachpb.NewError(err)
}
}
startNS := tc.clock.PhysicalNow()
if ba.Txn != nil {
// If this request is part of a transaction...
if err := tc.maybeBeginTxn(&ba); err != nil {
return nil, roachpb.NewError(err)
}
txnID := *ba.Txn.ID
// Verify that if this Transaction is not read-only, we have it on file.
// If not, refuse further operations - the transaction was aborted due
// to a timeout or the client must have issued a write on another
// coordinator previously.
if ba.Txn.Writing {
tc.Lock()
_, ok := tc.txns[txnID]
tc.Unlock()
if !ok {
pErr := roachpb.NewErrorf("writing transaction timed out, was aborted, " +
"or ran on multiple coordinators")
return nil, pErr
}
}
if rArgs, ok := ba.GetArg(roachpb.EndTransaction); ok {
et := rArgs.(*roachpb.EndTransactionRequest)
if len(et.Key) != 0 {
return nil, roachpb.NewErrorf("EndTransaction must not have a Key set")
}
et.Key = ba.Txn.Key
if len(et.IntentSpans) > 0 {
// TODO(tschottdorf): it may be useful to allow this later.
// That would be part of a possible plan to allow txns which
// write on multiple coordinators.
return nil, roachpb.NewErrorf("client must not pass intents to EndTransaction")
}
tc.Lock()
txnMeta, metaOK := tc.txns[txnID]
{
// Populate et.IntentSpans, taking into account both existing
// writes (if any) and new writes in this batch, and taking
// care to perform proper deduplication.
var keys interval.RangeGroup
if metaOK {
keys = txnMeta.keys
} else {
keys = interval.NewRangeTree()
}
ba.IntentSpanIterate(func(key, endKey roachpb.Key) {
addKeyRange(keys, key, endKey)
})
et.IntentSpans = collectIntentSpans(keys)
}
tc.Unlock()
if len(et.IntentSpans) > 0 {
// All good, proceed.
} else if !metaOK {
// If we don't have the transaction, then this must be a retry
// by the client. We can no longer reconstruct a correct
// request so we must fail.
//
// TODO(bdarnell): if we had a GetTransactionStatus API then
// we could lookup the transaction and return either nil or
// TransactionAbortedError instead of this ambivalent error.
return nil, roachpb.NewErrorf("transaction is already committed or aborted")
}
if len(et.IntentSpans) == 0 {
// If there aren't any intents, then there's factually no
// transaction to end. Read-only txns have all of their state in
// the client.
return nil, roachpb.NewErrorf("cannot commit a read-only transaction")
}
if log.V(1) {
for _, intent := range et.IntentSpans {
log.Trace(ctx, fmt.Sprintf("intent: [%s,%s)", intent.Key, intent.EndKey))
}
}
}
}
// Send the command through wrapped sender, taking appropriate measures
// on error.
var br *roachpb.BatchResponse
{
var pErr *roachpb.Error
br, pErr = tc.wrapped.Send(ctx, ba)
if _, ok := pErr.GetDetail().(*roachpb.OpRequiresTxnError); ok {
// TODO(tschottdorf): needs to keep the trace.
br, pErr = tc.resendWithTxn(ba)
}
if pErr = tc.updateState(startNS, ctx, ba, br, pErr); pErr != nil {
log.Trace(ctx, fmt.Sprintf("error: %s", pErr))
return nil, pErr
}
}
if br.Txn == nil {
return br, nil
}
if _, ok := ba.GetArg(roachpb.EndTransaction); !ok {
return br, nil
}
// If the --linearizable flag is set, we want to make sure that
// all the clocks in the system are past the commit timestamp
// of the transaction. This is guaranteed if either
// - the commit timestamp is MaxOffset behind startNS
// - MaxOffset ns were spent in this function
// when returning to the client. Below we choose the option
// that involves less waiting, which is likely the first one
// unless a transaction commits with an odd timestamp.
if tsNS := br.Txn.Timestamp.WallTime; startNS > tsNS {
startNS = tsNS
}
sleepNS := tc.clock.MaxOffset() -
time.Duration(tc.clock.PhysicalNow()-startNS)
if tc.linearizable && sleepNS > 0 {
defer func() {
if log.V(1) {
log.Infof("%v: waiting %s on EndTransaction for linearizability", br.Txn.ID.Short(), util.TruncateDuration(sleepNS, time.Millisecond))
}
time.Sleep(sleepNS)
}()
}
if br.Txn.Status != roachpb.PENDING {
tc.cleanupTxn(ctx, *br.Txn)
}
return br, nil
}
// updateState updates the transaction state in both the success and
// error cases, applying those updates to the corresponding txnMeta
// object when adequate. It also updates certain errors with the
// updated transaction for use by client restarts.
func (tc *TxnCoordSender) updateState(
startNS int64, ctx context.Context, ba roachpb.BatchRequest,
br *roachpb.BatchResponse, pErr *roachpb.Error) *roachpb.Error {
newTxn := &roachpb.Transaction{}
newTxn.Update(ba.Txn)
if pErr == nil {
newTxn.Update(br.Txn)
} else {
newTxn.Update(pErr.GetTxn())
}
switch t := pErr.GetDetail().(type) {
case *roachpb.TransactionStatusError:
// Likely already committed or more obscure errors such as epoch or
// timestamp regressions; consider txn dead.
defer tc.cleanupTxn(ctx, *pErr.GetTxn())
case *roachpb.OpRequiresTxnError:
panic("OpRequiresTxnError must not happen at this level")
case *roachpb.ReadWithinUncertaintyIntervalError:
// If the reader encountered a newer write within the uncertainty
// interval, we advance the txn's timestamp just past the last observed
// timestamp from the node.
restartTS, ok := newTxn.GetObservedTimestamp(pErr.OriginNode)
if !ok {
pErr = roachpb.NewError(util.Errorf("no observed timestamp for node %d found on uncertainty restart", pErr.OriginNode))
} else {
newTxn.Timestamp.Forward(restartTS)
newTxn.Restart(ba.UserPriority, newTxn.Priority, newTxn.Timestamp)
}
case *roachpb.TransactionAbortedError:
// Increase timestamp if applicable.
newTxn.Timestamp.Forward(pErr.GetTxn().Timestamp)
newTxn.Priority = pErr.GetTxn().Priority
// Clean up the freshly aborted transaction in defer(), avoiding a
// race with the state update below.
defer tc.cleanupTxn(ctx, *newTxn)
case *roachpb.TransactionPushError:
// Increase timestamp if applicable, ensuring that we're
// just ahead of the pushee.
newTxn.Timestamp.Forward(t.PusheeTxn.Timestamp)
newTxn.Restart(ba.UserPriority, t.PusheeTxn.Priority-1, newTxn.Timestamp)
case *roachpb.TransactionRetryError:
// Increase timestamp so on restart, we're ahead of any timestamp
// cache entries or newer versions which caused the restart.
newTxn.Restart(ba.UserPriority, pErr.GetTxn().Priority, newTxn.Timestamp)
case *roachpb.WriteTooOldError:
newTxn.Restart(ba.UserPriority, newTxn.Priority, t.ActualTimestamp)
case nil:
// Nothing to do here, avoid the default case.
default:
if pErr.GetTxn() != nil {
if pErr.CanRetry() {
panic("Retryable internal error must not happen at this level")
} else {
// Do not clean up the transaction here since the client might still
// want to continue the transaction. For example, a client might
// continue its transaction after receiving ConditionFailedError, which
// can come from a unique index violation.
}
}
}
if pErr != nil && pErr.GetTxn() != nil {
// Avoid changing existing errors because sometimes they escape into
// goroutines and then there are races. Fairly sure there isn't one
// here, but better safe than sorry.
pErrShallow := *pErr
pErrShallow.SetTxn(newTxn)
pErr = &pErrShallow
}
if newTxn.ID == nil {
return pErr
}
txnID := *newTxn.ID
tc.Lock()
defer tc.Unlock()
txnMeta := tc.txns[txnID]
// For successful transactional requests, keep the written intents and
// the updated transaction record to be sent along with the reply.
// The transaction metadata is created with the first writing operation.
// A tricky edge case is that of a transaction which "fails" on the
// first writing request, but actually manages to write some intents
// (for example, due to being multi-range). In this case, there will
// be an error, but the transaction will be marked as Writing and the
// coordinator must track the state, for the client's retry will be
// performed with a Writing transaction which the coordinator rejects
// unless it is tracking it (on top of it making sense to track it;
// after all, it **has** laid down intents and only the coordinator
// can augment a potential EndTransaction call). See #3303.
var intentGroup interval.RangeGroup
if txnMeta != nil {
intentGroup = txnMeta.keys
} else if pErr == nil || newTxn.Writing {
intentGroup = interval.NewRangeTree()
}
if intentGroup != nil {
// Adding the intents even on error reduces the likelihood of dangling
// intents blocking concurrent writers for extended periods of time.
// See #3346.
ba.IntentSpanIterate(func(key, endKey roachpb.Key) {
addKeyRange(intentGroup, key, endKey)
})
if txnMeta == nil && intentGroup.Len() > 0 {
if !newTxn.Writing {
panic("txn with intents marked as non-writing")
}
// If the transaction is already over, there's no point in
// launching a one-off coordinator which will shut down right
// away. If we ended up here with an error, we'll always start
// the coordinator - the transaction has laid down intents, so
// we expect it to be committed/aborted at some point in the
// future.
if _, isEnding := ba.GetArg(roachpb.EndTransaction); pErr != nil || !isEnding {
log.Trace(ctx, "coordinator spawns")
txnMeta = &txnMetadata{
txn: *newTxn,
keys: intentGroup,
firstUpdateNanos: startNS,
lastUpdateNanos: tc.clock.PhysicalNow(),
timeoutDuration: tc.clientTimeout,
txnEnd: make(chan struct{}),
}
tc.txns[txnID] = txnMeta
if !tc.stopper.RunAsyncTask(func() {
tc.heartbeatLoop(ctx, txnID)
}) {
// The system is already draining and we can't start the
// heartbeat. We refuse new transactions for now because
// they're likely not going to have all intents committed.
// In principle, we can relax this as needed though.
tc.unregisterTxnLocked(txnID)
return roachpb.NewError(&roachpb.NodeUnavailableError{})
}
} else {
// If this was a successful one phase commit, update stats
// directly as they won't otherwise be updated on heartbeat
// loop shutdown.
etArgs, ok := br.Responses[len(br.Responses)-1].GetInner().(*roachpb.EndTransactionResponse)
tc.updateStats(tc.clock.PhysicalNow()-startNS, 0, newTxn.Status, ok && etArgs.OnePhaseCommit)
}
}
}
// Update our record of this transaction, even on error.
if txnMeta != nil {
txnMeta.txn = *newTxn
if !txnMeta.txn.Writing {
panic("tracking a non-writing txn")
}
txnMeta.setLastUpdate(tc.clock.PhysicalNow())
}
if pErr == nil {
// For successful transactional requests, always send the updated txn
// record back.
br.Txn = newTxn
}
return pErr
}
// Send implements the batch.Sender interface. If the request is part of a
// transaction, the TxnCoordSender adds the transaction to a map of active
// transactions and begins heartbeating it. Every subsequent request for the
// same transaction updates the lastUpdate timestamp to prevent live
// transactions from being considered abandoned and garbage collected.
// Read/write mutating requests have their key or key range added to the
// transaction's interval tree of key ranges for eventual cleanup via resolved
// write intents; they're tagged to an outgoing EndTransaction request, with
// the receiving replica in charge of resolving them.
func (tc *TxnCoordSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
{
// Start new or pick up active trace and embed its trace metadata into
// header for use by RPC recipients. From here on, there's always an active
// Trace, though its overhead is small unless it's sampled.
sp := opentracing.SpanFromContext(ctx)
// TODO(radu): once contexts are plumbed correctly, we should use the Tracer
// from ctx.
tracer := tracing.TracerFromCtx(tc.ctx)
if sp == nil {
sp = tracer.StartSpan(opTxnCoordSender)
defer sp.Finish()
ctx = opentracing.ContextWithSpan(ctx, sp)
}
// TODO(tschottdorf): To get rid of the spurious alloc below we need to
// implement the carrier interface on ba.Header or make Span non-nullable,
// both of which force all of ba on the Heap. It's already there, so may
// not be a big deal, but ba should live on the stack. Also not easy to use
// a buffer pool here since anything that goes into the RPC layer could be
// used by goroutines we didn't wait for.
if ba.Header.Trace == nil {
ba.Header.Trace = &tracing.Span{}
} else {
// We didn't make this object but are about to mutate it, so we
// have to take a copy - the original might already have been
// passed to the RPC layer.
ba.Header.Trace = protoutil.Clone(ba.Header.Trace).(*tracing.Span)
}
if err := tracer.Inject(sp.Context(), basictracer.Delegator, ba.Trace); err != nil {
return nil, roachpb.NewError(err)
}
}
startNS := tc.clock.PhysicalNow()
if ba.Txn != nil {
// If this request is part of a transaction...
if err := tc.maybeBeginTxn(&ba); err != nil {
return nil, roachpb.NewError(err)
}
var et *roachpb.EndTransactionRequest
var hasET bool
{
var rArgs roachpb.Request
rArgs, hasET = ba.GetArg(roachpb.EndTransaction)
if hasET {
et = rArgs.(*roachpb.EndTransactionRequest)
if len(et.Key) != 0 {
return nil, roachpb.NewErrorf("EndTransaction must not have a Key set")
}
et.Key = ba.Txn.Key
if len(et.IntentSpans) > 0 {
// TODO(tschottdorf): it may be useful to allow this later.
// That would be part of a possible plan to allow txns which
// write on multiple coordinators.
return nil, roachpb.NewErrorf("client must not pass intents to EndTransaction")
}
}
}
if pErr := func() *roachpb.Error {
tc.Lock()
defer tc.Unlock()
if pErr := tc.maybeRejectClientLocked(ctx, *ba.Txn); pErr != nil {
return pErr
}
if !hasET {
return nil
}
// Everything below is carried out only when trying to commit.
// Populate et.IntentSpans, taking into account both any existing
// and new writes, and taking care to perform proper deduplication.
txnMeta := tc.txns[*ba.Txn.ID]
distinctSpans := true
if txnMeta != nil {
et.IntentSpans = txnMeta.keys
// Defensively set distinctSpans to false if we had any previous
// requests in this transaction. This effectively limits the distinct
// spans optimization to 1pc transactions.
distinctSpans = len(txnMeta.keys) == 0
}
ba.IntentSpanIterate(func(key, endKey roachpb.Key) {
et.IntentSpans = append(et.IntentSpans, roachpb.Span{
Key: key,
EndKey: endKey,
})
})
// TODO(peter): Populate DistinctSpans on all batches, not just batches
// which contain an EndTransactionRequest.
var distinct bool
// The request might already be used by an outgoing goroutine, so
// we can't safely mutate anything in-place (as MergeSpans does).
et.IntentSpans = append([]roachpb.Span(nil), et.IntentSpans...)
et.IntentSpans, distinct = roachpb.MergeSpans(et.IntentSpans)
ba.Header.DistinctSpans = distinct && distinctSpans
if len(et.IntentSpans) == 0 {
// If there aren't any intents, then there's factually no
// transaction to end. Read-only txns have all of their state
// in the client.
return roachpb.NewErrorf("cannot commit a read-only transaction")
}
if txnMeta != nil {
txnMeta.keys = et.IntentSpans
}
return nil
}(); pErr != nil {
return nil, pErr
}
if hasET && log.V(1) {
for _, intent := range et.IntentSpans {
log.Tracef(ctx, "intent: [%s,%s)", intent.Key, intent.EndKey)
}
}
}
// Send the command through wrapped sender, taking appropriate measures
// on error.
var br *roachpb.BatchResponse
{
var pErr *roachpb.Error
br, pErr = tc.wrapped.Send(ctx, ba)
if _, ok := pErr.GetDetail().(*roachpb.OpRequiresTxnError); ok {
// TODO(tschottdorf): needs to keep the trace.
br, pErr = tc.resendWithTxn(ba)
}
if pErr = tc.updateState(startNS, ctx, ba, br, pErr); pErr != nil {
log.Tracef(ctx, "error: %s", pErr)
return nil, pErr
}
}
if br.Txn == nil {
return br, nil
}
if _, ok := ba.GetArg(roachpb.EndTransaction); !ok {
return br, nil
}
// If the --linearizable flag is set, we want to make sure that
// all the clocks in the system are past the commit timestamp
// of the transaction. This is guaranteed if either
// - the commit timestamp is MaxOffset behind startNS
// - MaxOffset ns were spent in this function
// when returning to the client. Below we choose the option
// that involves less waiting, which is likely the first one
// unless a transaction commits with an odd timestamp.
if tsNS := br.Txn.Timestamp.WallTime; startNS > tsNS {
startNS = tsNS
}
sleepNS := tc.clock.MaxOffset() -
time.Duration(tc.clock.PhysicalNow()-startNS)
if tc.linearizable && sleepNS > 0 {
defer func() {
if log.V(1) {
log.Infof(ctx, "%v: waiting %s on EndTransaction for linearizability", br.Txn.ID.Short(), util.TruncateDuration(sleepNS, time.Millisecond))
}
time.Sleep(sleepNS)
}()
}
if br.Txn.Status != roachpb.PENDING {
tc.Lock()
tc.cleanupTxnLocked(ctx, *br.Txn)
tc.Unlock()
}
return br, nil
}
