示例#1
0
文件: watch.go 项目: eticzon/devd
// WatchPaths watches a set of paths, and broadcasts changes through reloader.
func WatchPaths(paths, excludePatterns []string, reloader livereload.Reloader, log termlog.Logger) error {
	ch := make(chan []string, 1)
	for _, path := range paths {
		modchan := make(chan *watch.Mod, 1)
		_, err := watch.Watch([]string{path}, batchTime, modchan)
		if err != nil {
			return err
		}
		go func() {
			for mod := range modchan {
				mod.Filter([]string{"*"}, excludePatterns)
				if !mod.Empty() {
					ch <- mod.All()
				}
			}
		}()
	}
	go reloader.Watch(ch)
	return nil
}
示例#2
0
文件: watch.go 项目: eticzon/devd
// Watch watches an endpoint for changes, if it supports them.
func (r Route) Watch(ch chan []string, excludePatterns []string, log termlog.Logger) error {
	switch r.Endpoint.(type) {
	case *filesystemEndpoint:
		ep := *r.Endpoint.(*filesystemEndpoint)
		modchan := make(chan *watch.Mod, 1)
		_, err := watch.Watch([]string{string(ep)}, batchTime, modchan)
		if err != nil {
			return err
		}
		go func() {
			for mod := range modchan {
				mod.Filter([]string{"*"}, excludePatterns)
				if !mod.Empty() {
					ch <- mod.All()
				}
			}
		}()
	}
	return nil
}
示例#3
0
// Gives control of chan to caller
func runOnChan(modchan chan *watch.Mod, readyCallback func(), log termlog.TermLog, cnf *conf.Config, watchconf string, notifiers []notify.Notifier) (*conf.Config, error) {
	err := PrepOnly(log, cnf, notifiers)
	if err != nil {
		return nil, err
	}

	dworld, err := NewDaemonWorld(cnf, log)
	if err != nil {
		return nil, err
	}

	c := make(chan os.Signal, 1)
	signal.Notify(c, os.Interrupt, os.Kill)
	defer signal.Reset(os.Interrupt, os.Kill)
	defer dworld.Shutdown(os.Kill)
	go func() {
		dworld.Shutdown(<-c)
		os.Exit(0)
	}()

	dworld.Start()
	watchpaths := cnf.WatchPatterns()
	if watchconf != "" {
		watchpaths = append(watchpaths, filepath.Dir(watchconf))
	}

	// FIXME: This takes a long time. We could start it in parallel with the
	// first process run in a goroutine
	watcher, err := watch.Watch(watchpaths, lullTime, modchan)
	if err != nil {
		return nil, fmt.Errorf("Error watching: %s", err)
	}
	defer watcher.Stop()
	go readyCallback()

	for mod := range modchan {
		if mod == nil {
			break
		}
		if watchconf != "" && mod.Has(watchconf) {
			ret, err := ioutil.ReadFile(watchconf)
			if err != nil {
				log.Warn("Reloading config - error reading %s: %s", watchconf, err)
				continue
			}
			newcnf, err := conf.Parse(watchconf, string(ret))
			if err != nil {
				log.Warn("Reloading config - error reading %s: %s", watchconf, err)
				continue
			}
			log.Notice("Reloading config %s", watchconf)
			return newcnf, nil
		}
		log.SayAs("debug", "Delta: \n%s", mod.String())
		for i, b := range cnf.Blocks {
			lmod, err := mod.Filter(b.Include, b.Exclude)
			if err != nil {
				log.Shout("Error filtering events: %s", err)
				continue
			}
			if lmod.Empty() {
				continue
			}
			err = RunPreps(b, cnf.GetVariables(), lmod, log, notifiers)
			if err != nil {
				if _, ok := err.(ProcError); ok {
					continue
				} else {
					return nil, err
				}
			}
			dworld.DaemonPens[i].Restart()
		}
	}
	return nil, nil
}
示例#4
0
文件: main.go 项目: mattn/modd
func run(log termlog.TermLog, cnf *conf.Config, watchconf string) *conf.Config {
	modchan := make(chan *watch.Mod, 1024)
	if *ignores {
		for _, patt := range watch.CommonExcludes {
			fmt.Println(patt)
		}
		os.Exit(0)
	}

	daemonPens := make([]*modd.DaemonPen, len(cnf.Blocks))
	for i, b := range cnf.Blocks {
		if !b.NoCommonFilter {
			b.Exclude = append(b.Exclude, watch.CommonExcludes...)
		}
		cnf.Blocks[i] = b

		_, err := prepsAndNotify(b, cnf.GetVariables(), nil, log)
		if err != nil {
			log.Shout("%s", err)
			return nil
		}

		d := modd.DaemonPen{}
		c := make(chan os.Signal, 1)
		signal.Notify(c, os.Interrupt, os.Kill)
		go func() {
			d.Shutdown(<-c)
			os.Exit(0)
		}()
		if !*prep {
			d.Start(b.Daemons, cnf.GetVariables(), log)
		}
		daemonPens[i] = &d
	}
	if *prep {
		os.Exit(0)
	}

	watchpaths := cnf.WatchPaths()
	if watchconf != "" {
		watchpaths = append(watchpaths, watchconf)
	}

	// FIXME: This takes a long time. We could start it in parallel with the
	// first process run in a goroutine
	watcher, err := watch.Watch(watchpaths, lullTime, modchan)
	defer watcher.Stop()
	if err != nil {
		kingpin.Fatalf("Fatal error: %s", err)
	}

	for mod := range modchan {
		if watchconf != "" && mod.Has(watchconf) {
			ret, err := ioutil.ReadFile(watchconf)
			if err != nil {
				log.Warn("Reloading config - error reading %s: %s", watchconf, err)
				continue
			}
			newcnf, err := conf.Parse(*file, string(ret))
			if err != nil {
				log.Warn("Reloading config - error reading %s: %s", watchconf, err)
				continue
			}
			log.Notice("Reloading config %s", watchconf)
			return newcnf
		}
		if mod == nil {
			break
		}
		log.SayAs("debug", "Delta: \n%s", mod.String())
		for i, b := range cnf.Blocks {
			lmod, err := mod.Filter(b.Include, b.Exclude)
			if err != nil {
				log.Shout("Error filtering events: %s", err)
				continue
			}
			if lmod.Empty() {
				continue
			}

			proceed, err := prepsAndNotify(b, cnf.GetVariables(), lmod, log)
			if err != nil {
				log.Shout("%s", err)
				return nil
			}
			if !proceed {
				continue
			}
			daemonPens[i].Restart()
		}
	}
	return nil
}